DMAENGINE: Set burst size for phy and log chans in ste_dma40 dev_control

Set burst for physical or logical channels respectively.
Convert the values in dma_cfg to dma reg bits
for physical or logical channels.
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/dma/ste_dma40.c

@@ -2246,6 +2246,7 @@ static void d40_set_runtime_config(struct dma_chan *chan,
 		return;
 	}
 
+	if (d40c->log_num != D40_PHY_CHAN) {
 		if (config_maxburst >= 16)
 			psize = STEDMA40_PSIZE_LOG_16;
 		else if (config_maxburst >= 8)
@@ -2254,6 +2255,16 @@ static void d40_set_runtime_config(struct dma_chan *chan,
 			psize = STEDMA40_PSIZE_LOG_4;
 		else
 			psize = STEDMA40_PSIZE_LOG_1;
+	} else {
+		if (config_maxburst >= 16)
+			psize = STEDMA40_PSIZE_PHY_16;
+		else if (config_maxburst >= 8)
+			psize = STEDMA40_PSIZE_PHY_8;
+		else if (config_maxburst >= 4)
+			psize = STEDMA40_PSIZE_PHY_4;
+		else
+			psize = STEDMA40_PSIZE_PHY_1;
+	}
 
 	/* Set up all the endpoint configs */
 	cfg->src_info.data_width = addr_width;
@@ -2265,6 +2276,13 @@ static void d40_set_runtime_config(struct dma_chan *chan,
 	cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
 	cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
 
+	/* Fill in register values */
+	if (d40c->log_num != D40_PHY_CHAN)
+		d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
+	else
+		d40_phy_cfg(cfg, &d40c->src_def_cfg,
+			    &d40c->dst_def_cfg, false);
+
 	/* These settings will take precedence later */
 	d40c->runtime_addr = config_addr;
 	d40c->runtime_direction = config->direction;