Commit a5b20600 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Vinod Koul

dmaengine: axi-dmac: Discover length alignment requirement

Starting with version 4.1.a the AXI-DMAC is capable of reporting the
required length alignment.

The LSBs that are required to be set for alignment will always read back as
set from the transfer length register. It is not possible to clear them by
writing a 0. This means the driver can discover the length alignment
requirement by writing 0 to that register and reading back the value.

Since the DMA will support length alignment requirements that are different
from the address alignment requirement track both of them independently.

For older versions of the peripheral assume that the length alignment
requirement is equal to the address alignment requirement.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent d27ac2e0
......@@ -20,6 +20,7 @@
#include <linux/of_dma.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/fpga/adi-axi-common.h>
#include <dt-bindings/dma/axi-dmac.h>
......@@ -110,7 +111,8 @@ struct axi_dmac_chan {
unsigned int dest_type;
unsigned int max_length;
unsigned int align_mask;
unsigned int address_align_mask;
unsigned int length_align_mask;
bool hw_cyclic;
bool hw_2d;
......@@ -169,14 +171,14 @@ static bool axi_dmac_check_len(struct axi_dmac_chan *chan, unsigned int len)
{
if (len == 0)
return false;
if ((len & chan->align_mask) != 0) /* Not aligned */
if ((len & chan->length_align_mask) != 0) /* Not aligned */
return false;
return true;
}
static bool axi_dmac_check_addr(struct axi_dmac_chan *chan, dma_addr_t addr)
{
if ((addr & chan->align_mask) != 0) /* Not aligned */
if ((addr & chan->address_align_mask) != 0) /* Not aligned */
return false;
return true;
}
......@@ -394,7 +396,7 @@ static struct axi_dmac_sg *axi_dmac_fill_linear_sg(struct axi_dmac_chan *chan,
num_segments = DIV_ROUND_UP(period_len, chan->max_length);
segment_size = DIV_ROUND_UP(period_len, num_segments);
/* Take care of alignment */
segment_size = ((segment_size - 1) | chan->align_mask) + 1;
segment_size = ((segment_size - 1) | chan->length_align_mask) + 1;
for (i = 0; i < num_periods; i++) {
len = period_len;
......@@ -623,7 +625,7 @@ static int axi_dmac_parse_chan_dt(struct device_node *of_chan,
return ret;
chan->dest_width = val / 8;
chan->align_mask = max(chan->dest_width, chan->src_width) - 1;
chan->address_align_mask = max(chan->dest_width, chan->src_width) - 1;
if (axi_dmac_dest_is_mem(chan) && axi_dmac_src_is_mem(chan))
chan->direction = DMA_MEM_TO_MEM;
......@@ -640,6 +642,9 @@ static int axi_dmac_parse_chan_dt(struct device_node *of_chan,
static int axi_dmac_detect_caps(struct axi_dmac *dmac)
{
struct axi_dmac_chan *chan = &dmac->chan;
unsigned int version;
version = axi_dmac_read(dmac, ADI_AXI_REG_VERSION);
axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, AXI_DMAC_FLAG_CYCLIC);
if (axi_dmac_read(dmac, AXI_DMAC_REG_FLAGS) == AXI_DMAC_FLAG_CYCLIC)
......@@ -670,6 +675,14 @@ static int axi_dmac_detect_caps(struct axi_dmac *dmac)
return -ENODEV;
}
if (version >= ADI_AXI_PCORE_VER(4, 1, 'a')) {
axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, 0x00);
chan->length_align_mask =
axi_dmac_read(dmac, AXI_DMAC_REG_X_LENGTH);
} else {
chan->length_align_mask = chan->address_align_mask;
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment