[ATM] drivers/atm/ambassador.c: stop inlining largish static functions

drivers/atm/ambassador.c has unusually large number
of static inline functions - 22.

I looked through them and half of them seem to be too big
to warrant inlining.

This patch removes "inline" from these static functions
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).

Size difference for 32bit x86:
   text    data     bss     dec     hex filename
  10209    8488       4   18701    490d linux-2.6-ALLYES/drivers/atm/ambassador.o
   9462    8488       4   17954    4622 linux-2.6.inline-ALLYES/drivers/atm/ambassador.o
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/atm/ambassador.c

@@ -437,7 +437,7 @@ static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * sk
 
 /* see limitations under Hardware Features */
 
-static inline int check_area (void * start, size_t length) {
+static int check_area (void * start, size_t length) {
   // assumes length > 0
   const u32 fourmegmask = -1 << 22;
   const u32 twofivesixmask = -1 << 8;
@@ -456,7 +456,7 @@ static inline int check_area (void * start, size_t length) {
 
 /********** free an skb (as per ATM device driver documentation) **********/
 
-static inline void amb_kfree_skb (struct sk_buff * skb) {
+static void amb_kfree_skb (struct sk_buff * skb) {
   if (ATM_SKB(skb)->vcc->pop) {
     ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
   } else {
@@ -466,7 +466,7 @@ static inline void amb_kfree_skb (struct sk_buff * skb) {
 
 /********** TX completion **********/
 
-static inline void tx_complete (amb_dev * dev, tx_out * tx) {
+static void tx_complete (amb_dev * dev, tx_out * tx) {
   tx_simple * tx_descr = bus_to_virt (tx->handle);
   struct sk_buff * skb = tx_descr->skb;
   
@@ -643,7 +643,7 @@ static int command_do (amb_dev * dev, command * cmd) {
 
 /********** TX queue pair **********/
 
-static inline int tx_give (amb_dev * dev, tx_in * tx) {
+static int tx_give (amb_dev * dev, tx_in * tx) {
   amb_txq * txq = &dev->txq;
   unsigned long flags;
   
@@ -675,7 +675,7 @@ static inline int tx_give (amb_dev * dev, tx_in * tx) {
   }
 }
 
-static inline int tx_take (amb_dev * dev) {
+static int tx_take (amb_dev * dev) {
   amb_txq * txq = &dev->txq;
   unsigned long flags;
   
@@ -703,7 +703,7 @@ static inline int tx_take (amb_dev * dev) {
 
 /********** RX queue pairs **********/
 
-static inline int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
+static int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
   amb_rxq * rxq = &dev->rxq[pool];
   unsigned long flags;
   
@@ -728,7 +728,7 @@ static inline int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
   }
 }
 
-static inline int rx_take (amb_dev * dev, unsigned char pool) {
+static int rx_take (amb_dev * dev, unsigned char pool) {
   amb_rxq * rxq = &dev->rxq[pool];
   unsigned long flags;
   
@@ -761,7 +761,7 @@ static inline int rx_take (amb_dev * dev, unsigned char pool) {
 /********** RX Pool handling **********/
 
 /* pre: buffers_wanted = 0, post: pending = 0 */
-static inline void drain_rx_pool (amb_dev * dev, unsigned char pool) {
+static void drain_rx_pool (amb_dev * dev, unsigned char pool) {
   amb_rxq * rxq = &dev->rxq[pool];
   
   PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pool %p %hu", dev, pool);
@@ -796,7 +796,7 @@ static void drain_rx_pools (amb_dev * dev) {
     drain_rx_pool (dev, pool);
 }
 
-static inline void fill_rx_pool (amb_dev * dev, unsigned char pool,
+static void fill_rx_pool (amb_dev * dev, unsigned char pool,
                                  gfp_t priority)
 {
   rx_in rx;
@@ -846,7 +846,7 @@ static void fill_rx_pools (amb_dev * dev) {
 
 /********** enable host interrupts **********/
 
-static inline void interrupts_on (amb_dev * dev) {
+static void interrupts_on (amb_dev * dev) {
   wr_plain (dev, offsetof(amb_mem, interrupt_control),
 	    rd_plain (dev, offsetof(amb_mem, interrupt_control))
 	    | AMB_INTERRUPT_BITS);
@@ -854,7 +854,7 @@ static inline void interrupts_on (amb_dev * dev) {
 
 /********** disable host interrupts **********/
 
-static inline void interrupts_off (amb_dev * dev) {
+static void interrupts_off (amb_dev * dev) {
   wr_plain (dev, offsetof(amb_mem, interrupt_control),
 	    rd_plain (dev, offsetof(amb_mem, interrupt_control))
 	    &~ AMB_INTERRUPT_BITS);