pinctrl: rockchip: only map bank0-pull-region when pmu regmap missing

When the pmu registers are supplied through a syscon regmap we do not need
to map the registers ourself.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Max Schwarz <max.schwarz@online.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/pinctrl-rockchip.c

@@ -1464,9 +1464,13 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
 	 */
 	if (of_device_is_compatible(bank->of_node,
 				    "rockchip,rk3188-gpio-bank0")) {
+		struct device_node *node;
 
 		bank->bank_type = RK3188_BANK0;
 
+		node = of_parse_phandle(bank->of_node->parent,
+					"rockchip,pmu", 0);
+		if (!node) {
 			if (of_address_to_resource(bank->of_node, 1, &res)) {
 				dev_err(info->dev, "cannot find IO resource for bank\n");
 				return -ENOENT;
@@ -1475,10 +1479,14 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
 			base = devm_ioremap_resource(info->dev, &res);
 			if (IS_ERR(base))
 				return PTR_ERR(base);
-		rockchip_regmap_config.max_register = resource_size(&res) - 4;
-		rockchip_regmap_config.name = "rockchip,rk3188-gpio-bank0-pull";
-		bank->regmap_pull = devm_regmap_init_mmio(info->dev, base,
+			rockchip_regmap_config.max_register =
+						    resource_size(&res) - 4;
+			rockchip_regmap_config.name =
+					    "rockchip,rk3188-gpio-bank0-pull";
+			bank->regmap_pull = devm_regmap_init_mmio(info->dev,
+						    base,
 						    &rockchip_regmap_config);
+		}
 
 	} else {
 		bank->bank_type = COMMON_BANK;