Skip to content

L
linux
Commit a6887e28 authored by James Smart's avatar James Smart Committed by James Bottomley
Browse files
Options

[SCSI] lpfc 8.3.39: Fixed BlockGuard to take advantage of rdprotect/wrprotect info when available 

Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent a40fc5f0
Show whitespace changes
Inline Side-by-side
Showing with 116 additions and 66 deletions
drivers/scsi/lpfc/lpfc_hw.h
View file @ a6887e28
......@@ -1667,6 +1667,7 @@ enum lpfc_protgrp_type {
#define BG_OP_IN_CSUM_OUT_CSUM 0x5
#define BG_OP_IN_CRC_OUT_CSUM 0x6
#define BG_OP_IN_CSUM_OUT_CRC 0x7
#define BG_OP_RAW_MODE 0x8
struct lpfc_pde5 {
uint32_t word0;
......
drivers/scsi/lpfc/lpfc_scsi.c
View file @ a6887e28
......@@ -68,6 +68,10 @@ struct scsi_dif_tuple {
__be32 ref_tag; /* Target LBA or indirect LBA */
};
#if !defined(SCSI_PROT_GUARD_CHECK) || !defined(SCSI_PROT_REF_CHECK)
#define scsi_prot_flagged(sc, flg) sc
#endif
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
......@@ -2066,9 +2070,21 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
/*
* We only need to check the data on READs, for WRITEs
* protection data is automatically generated, not checked.
*/
if (datadir == DMA_FROM_DEVICE) {
if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
bf_set(pde6_ce, pde6, checking);
else
bf_set(pde6_ce, pde6, 0);
if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
bf_set(pde6_re, pde6, checking);
else
bf_set(pde6_re, pde6, 0);
}
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
......@@ -2221,8 +2237,17 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
bf_set(pde6_ce, pde6, checking);
else
bf_set(pde6_ce, pde6, 0);
if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
bf_set(pde6_re, pde6, checking);
else
bf_set(pde6_re, pde6, 0);
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
bf_set(pde6_apptagval, pde6, 0);
......@@ -2385,7 +2410,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct sli4_sge_diseed *diseed = NULL;
dma_addr_t physaddr;
int i = 0, num_sge = 0, status;
int datadir = sc->sc_data_direction;
uint32_t reftag;
unsigned blksize;
uint8_t txop, rxop;
......@@ -2423,13 +2447,26 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
diseed->ref_tag = cpu_to_le32(reftag);
diseed->ref_tag_tran = diseed->ref_tag;
/* setup DISEED with the rest of the info */
bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
if (datadir == DMA_FROM_DEVICE) {
/*
* We only need to check the data on READs, for WRITEs
* protection data is automatically generated, not checked.
*/
if (sc->sc_data_direction == DMA_FROM_DEVICE) {
if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
else
bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
else
bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
}
/* setup DISEED with the rest of the info */
bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
......@@ -2571,11 +2608,34 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
diseed->ref_tag = cpu_to_le32(reftag);
diseed->ref_tag_tran = diseed->ref_tag;
if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) {
bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
} else {
bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
/*
* When in this mode, the hardware will replace
* the guard tag from the host with a
* newly generated good CRC for the wire.
* Switch to raw mode here to avoid this
* behavior. What the host sends gets put on the wire.
*/
if (txop == BG_OP_IN_CRC_OUT_CRC) {
txop = BG_OP_RAW_MODE;
rxop = BG_OP_RAW_MODE;
}
}
if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
else
bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
/* setup DISEED with the rest of the info */
bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
......@@ -2738,6 +2798,47 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
return ret;
}
/**
* lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be adjusted.
*
* Adjust the data length to account for how much data
* is actually on the wire.
*
* returns the adjusted data length
**/
static int
lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *sc = lpfc_cmd->pCmd;
int fcpdl;
fcpdl = scsi_bufflen(sc);
/* Check if there is protection data on the wire */
if (sc->sc_data_direction == DMA_FROM_DEVICE) {
/* Read */
if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
return fcpdl;
} else {
/* Write */
if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
return fcpdl;
}
/*
* If we are in DIF Type 1 mode every data block has a 8 byte
* DIF (trailer) attached to it. Must ajust FCP data length.
*/
if (scsi_prot_flagged(sc, SCSI_PROT_TRANSFER_PI))
fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
return fcpdl;
}
/**
* lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
......@@ -2758,8 +2859,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
uint32_t num_bde = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
int diflen, fcpdl;
unsigned blksize;
int fcpdl;
/*
* Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
......@@ -2856,18 +2956,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
fcpdl = scsi_bufflen(scsi_cmnd);
if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
/*
* We are in DIF Type 1 mode
* Every data block has a 8 byte DIF (trailer)
* attached to it. Must ajust FCP data length
*/
blksize = lpfc_cmd_blksize(scsi_cmnd);
diflen = (fcpdl / blksize) * 8;
fcpdl += diflen;
}
fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
/*
......@@ -2982,7 +3071,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
chk_guard = 1;
guard_type = scsi_host_get_guard(cmd->device->host);
start_ref_tag = scsi_get_lba(cmd);
start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
start_app_tag = src->app_tag;
src = (struct scsi_dif_tuple *)sg_virt(sgpe);
len = sgpe->length;
......@@ -3397,45 +3486,6 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
return 0;
}
/**
* lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be adjusted.
*
* Adjust the data length to account for how much data
* is actually on the wire.
*
* returns the adjusted data length
**/
static int
lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *sc = lpfc_cmd->pCmd;
int diflen, fcpdl;
unsigned blksize;
fcpdl = scsi_bufflen(sc);
/* Check if there is protection data on the wire */
if (sc->sc_data_direction == DMA_FROM_DEVICE) {
/* Read */
if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
return fcpdl;
} else {
/* Write */
if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
return fcpdl;
}
/* If protection data on the wire, adjust the count accordingly */
blksize = lpfc_cmd_blksize(sc);
diflen = (fcpdl / blksize) * 8;
fcpdl += diflen;
return fcpdl;
}
/**
* lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
* @phba: The Hba for which this call is being executed.
......@@ -3564,7 +3614,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
}
fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7