Skip to content

L
linux
Commit a73611b6 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6 

* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  powerpc: fix up for mmu_mapin_ram api change
  powerpc: wii: allow ioremap within the memory hole
  powerpc: allow ioremap within reserved memory regions
  wii: use both mem1 and mem2 as ram
  wii: bootwrapper: add fixup to calc useable mem2
  powerpc: gamecube/wii: early debugging using usbgecko
  powerpc: reserve fixmap entries for early debug
  powerpc: wii: default config
  powerpc: wii: platform support
  powerpc: wii: hollywood interrupt controller support
  powerpc: broadway processor support
  powerpc: wii: bootwrapper bits
  powerpc: wii: device tree
  powerpc: gamecube: default config
  powerpc: gamecube: platform support
  powerpc: gamecube/wii: flipper interrupt controller support
  powerpc: gamecube/wii: udbg support for usbgecko
  powerpc: gamecube/wii: do not include PCI support
  powerpc: gamecube/wii: declare as non-coherent platforms
  powerpc: gamecube/wii: introduce GAMECUBE_COMMON
  ...

Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.

Hopefully even close to correctly.
parents 5fa3577b ae4cec47
Show whitespace changes
Inline Side-by-side
Showing with 5161 additions and 22 deletions
Documentation/powerpc/dts-bindings/nintendo/gamecube.txt 0 → 100644
View file @ a73611b6
Nintendo GameCube device tree
=============================
1) The "flipper" node
This node represents the multi-function "Flipper" chip, which packages
many of the devices found in the Nintendo GameCube.
Required properties:
- compatible : Should be "nintendo,flipper"
1.a) The Video Interface (VI) node
Represents the interface between the graphics processor and a external
video encoder.
Required properties:
- compatible : should be "nintendo,flipper-vi"
- reg : should contain the VI registers location and length
- interrupts : should contain the VI interrupt
1.b) The Processor Interface (PI) node
Represents the data and control interface between the main processor
and graphics and audio processor.
Required properties:
- compatible : should be "nintendo,flipper-pi"
- reg : should contain the PI registers location and length
1.b.i) The "Flipper" interrupt controller node
Represents the interrupt controller within the "Flipper" chip.
The node for the "Flipper" interrupt controller must be placed under
the PI node.
Required properties:
- compatible : should be "nintendo,flipper-pic"
1.c) The Digital Signal Procesor (DSP) node
Represents the digital signal processor interface, designed to offload
audio related tasks.
Required properties:
- compatible : should be "nintendo,flipper-dsp"
- reg : should contain the DSP registers location and length
- interrupts : should contain the DSP interrupt
1.c.i) The Auxiliary RAM (ARAM) node
Represents the non cpu-addressable ram designed mainly to store audio
related information.
The ARAM node must be placed under the DSP node.
Required properties:
- compatible : should be "nintendo,flipper-aram"
- reg : should contain the ARAM start (zero-based) and length
1.d) The Disk Interface (DI) node
Represents the interface used to communicate with mass storage devices.
Required properties:
- compatible : should be "nintendo,flipper-di"
- reg : should contain the DI registers location and length
- interrupts : should contain the DI interrupt
1.e) The Audio Interface (AI) node
Represents the interface to the external 16-bit stereo digital-to-analog
converter.
Required properties:
- compatible : should be "nintendo,flipper-ai"
- reg : should contain the AI registers location and length
- interrupts : should contain the AI interrupt
1.f) The Serial Interface (SI) node
Represents the interface to the four single bit serial interfaces.
The SI is a proprietary serial interface used normally to control gamepads.
It's NOT a RS232-type interface.
Required properties:
- compatible : should be "nintendo,flipper-si"
- reg : should contain the SI registers location and length
- interrupts : should contain the SI interrupt
1.g) The External Interface (EXI) node
Represents the multi-channel SPI-like interface.
Required properties:
- compatible : should be "nintendo,flipper-exi"
- reg : should contain the EXI registers location and length
- interrupts : should contain the EXI interrupt
Documentation/powerpc/dts-bindings/nintendo/wii.txt 0 → 100644
View file @ a73611b6
Nintendo Wii device tree
========================
0) The root node
This node represents the Nintendo Wii video game console.
Required properties:
- model : Should be "nintendo,wii"
- compatible : Should be "nintendo,wii"
1) The "hollywood" node
This node represents the multi-function "Hollywood" chip, which packages
many of the devices found in the Nintendo Wii.
Required properties:
- compatible : Should be "nintendo,hollywood"
1.a) The Video Interface (VI) node
Represents the interface between the graphics processor and a external
video encoder.
Required properties:
- compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
- reg : should contain the VI registers location and length
- interrupts : should contain the VI interrupt
1.b) The Processor Interface (PI) node
Represents the data and control interface between the main processor
and graphics and audio processor.
Required properties:
- compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
- reg : should contain the PI registers location and length
1.b.i) The "Flipper" interrupt controller node
Represents the "Flipper" interrupt controller within the "Hollywood" chip.
The node for the "Flipper" interrupt controller must be placed under
the PI node.
Required properties:
- #interrupt-cells : <1>
- compatible : should be "nintendo,flipper-pic"
- interrupt-controller
1.c) The Digital Signal Procesor (DSP) node
Represents the digital signal processor interface, designed to offload
audio related tasks.
Required properties:
- compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
- reg : should contain the DSP registers location and length
- interrupts : should contain the DSP interrupt
1.d) The Serial Interface (SI) node
Represents the interface to the four single bit serial interfaces.
The SI is a proprietary serial interface used normally to control gamepads.
It's NOT a RS232-type interface.
Required properties:
- compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
- reg : should contain the SI registers location and length
- interrupts : should contain the SI interrupt
1.e) The Audio Interface (AI) node
Represents the interface to the external 16-bit stereo digital-to-analog
converter.
Required properties:
- compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
- reg : should contain the AI registers location and length
- interrupts : should contain the AI interrupt
1.f) The External Interface (EXI) node
Represents the multi-channel SPI-like interface.
Required properties:
- compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
- reg : should contain the EXI registers location and length
- interrupts : should contain the EXI interrupt
1.g) The Open Host Controller Interface (OHCI) nodes
Represent the USB 1.x Open Host Controller Interfaces.
Required properties:
- compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci"
- reg : should contain the OHCI registers location and length
- interrupts : should contain the OHCI interrupt
1.h) The Enhanced Host Controller Interface (EHCI) node
Represents the USB 2.0 Enhanced Host Controller Interface.
Required properties:
- compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
- reg : should contain the EHCI registers location and length
- interrupts : should contain the EHCI interrupt
1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
Represent the Secure Digital Host Controller Interfaces.
Required properties:
- compatible : should be "nintendo,hollywood-sdhci","sdhci"
- reg : should contain the SDHCI registers location and length
- interrupts : should contain the SDHCI interrupt
1.j) The Inter-Processsor Communication (IPC) node
Represent the Inter-Processor Communication interface. This interface
enables communications between the Broadway and the Starlet processors.
- compatible : should be "nintendo,hollywood-ipc"
- reg : should contain the IPC registers location and length
- interrupts : should contain the IPC interrupt
1.k) The "Hollywood" interrupt controller node
Represents the "Hollywood" interrupt controller within the
"Hollywood" chip.
Required properties:
- #interrupt-cells : <1>
- compatible : should be "nintendo,hollywood-pic"
- reg : should contain the controller registers location and length
- interrupt-controller
- interrupts : should contain the cascade interrupt of the "flipper" pic
- interrupt-parent: should contain the phandle of the "flipper" pic
1.l) The General Purpose I/O (GPIO) controller node
Represents the dual access 32 GPIO controller interface.
Required properties:
- #gpio-cells : <2>
- compatible : should be "nintendo,hollywood-gpio"
- reg : should contain the IPC registers location and length
- gpio-controller
1.m) The control node
Represents the control interface used to setup several miscellaneous
settings of the "Hollywood" chip like boot memory mappings, resets,
disk interface mode, etc.
Required properties:
- compatible : should be "nintendo,hollywood-control"
- reg : should contain the control registers location and length
1.n) The Disk Interface (DI) node
Represents the interface used to communicate with mass storage devices.
Required properties:
- compatible : should be "nintendo,hollywood-di"
- reg : should contain the DI registers location and length
- interrupts : should contain the DI interrupt
arch/powerpc/Kconfig
View file @ a73611b6
......@@ -704,7 +704,7 @@ config PPC_PCI_CHOICE
config PCI
bool "PCI support" if PPC_PCI_CHOICE
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
select ARCH_SUPPORTS_MSI
......
arch/powerpc/Kconfig.debug
View file @ a73611b6
......@@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM
using a CPM-based serial port. This assumes that the bootwrapper
has run, and set up the CPM in a particular way.
config PPC_EARLY_DEBUG_USBGECKO
bool "Early debugging through the USB Gecko adapter"
depends on GAMECUBE_COMMON
select USBGECKO_UDBG
help
Select this to enable early debugging for Nintendo GameCube/Wii
consoles via an external USB Gecko adapter.
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
......
arch/powerpc/boot/Makefile
View file @ a73611b6
......@@ -66,7 +66,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
fsl-soc.c mpc8xx.c pq2.c
fsl-soc.c mpc8xx.c pq2.c ugecon.c
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
......@@ -76,7 +76,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
gamecube-head.S gamecube.c wii-head.S wii.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
......@@ -254,6 +255,8 @@ image-$(CONFIG_KSI8560) += cuImage.ksi8560
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
......
arch/powerpc/boot/dts/gamecube.dts 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/dts/gamecube.dts
*
* Nintendo GameCube platform device tree source
* Copyright (C) 2007-2009 The GameCube Linux Team
* Copyright (C) 2007,2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
/dts-v1/;
/ {
model = "nintendo,gamecube";
compatible = "nintendo,gamecube";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
};
memory {
device_type = "memory";
reg = <0x00000000 0x01800000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,gekko@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <486000000>; /* 486MHz */
bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
timebase-frequency = <40500000>; /* 162MHz / 4 */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
};
};
/* devices contained int the flipper chipset */
flipper {
#address-cells = <1>;
#size-cells = <1>;
compatible = "nintendo,flipper";
ranges = <0x0c000000 0x0c000000 0x00010000>;
interrupt-parent = <&PIC>;
video@0c002000 {
compatible = "nintendo,flipper-vi";
reg = <0x0c002000 0x100>;
interrupts = <8>;
};
processor-interface@0c003000 {
compatible = "nintendo,flipper-pi";
reg = <0x0c003000 0x100>;
PIC: pic {
#interrupt-cells = <1>;
compatible = "nintendo,flipper-pic";
interrupt-controller;
};
};
dsp@0c005000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "nintendo,flipper-dsp";
reg = <0x0c005000 0x200>;
interrupts = <6>;
memory@0 {
compatible = "nintendo,flipper-aram";
reg = <0 0x1000000>; /* 16MB */
};
};
disk@0c006000 {
compatible = "nintendo,flipper-di";
reg = <0x0c006000 0x40>;
interrupts = <2>;
};
audio@0c006c00 {
compatible = "nintendo,flipper-ai";
reg = <0x0c006c00 0x20>;
interrupts = <6>;
};
gamepad-controller@0c006400 {
compatible = "nintendo,flipper-si";
reg = <0x0c006400 0x100>;
interrupts = <3>;
};
/* External Interface bus */
exi@0c006800 {
compatible = "nintendo,flipper-exi";
reg = <0x0c006800 0x40>;
virtual-reg = <0x0c006800>;
interrupts = <4>;
};
};
};
arch/powerpc/boot/dts/wii.dts 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/dts/wii.dts
*
* Nintendo Wii platform device tree source
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
/dts-v1/;
/*
* This is commented-out for now.
* Until a later patch is merged, the kernel can use only the first
* contiguous RAM range and will BUG() if the memreserve is outside
* that range.
*/
/*/memreserve/ 0x10000000 0x0004000;*/ /* DSP RAM */
/ {
model = "nintendo,wii";
compatible = "nintendo,wii";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal";
};
memory {
device_type = "memory";
reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */
0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,broadway@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <729000000>; /* 729MHz */
bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
timebase-frequency = <60750000>; /* 243MHz / 4 */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
};
};
/* devices contained in the hollywood chipset */
hollywood {
#address-cells = <1>;
#size-cells = <1>;
compatible = "nintendo,hollywood";
ranges = <0x0c000000 0x0c000000 0x01000000
0x0d000000 0x0d000000 0x00800000
0x0d800000 0x0d800000 0x00800000>;
interrupt-parent = <&PIC0>;
video@0c002000 {
compatible = "nintendo,hollywood-vi",
"nintendo,flipper-vi";
reg = <0x0c002000 0x100>;
interrupts = <8>;
};
processor-interface@0c003000 {
compatible = "nintendo,hollywood-pi",
"nintendo,flipper-pi";
reg = <0x0c003000 0x100>;
PIC0: pic0 {
#interrupt-cells = <1>;
compatible = "nintendo,flipper-pic";
interrupt-controller;
};
};
dsp@0c005000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "nintendo,hollywood-dsp",
"nintendo,flipper-dsp";
reg = <0x0c005000 0x200>;
interrupts = <6>;
};
gamepad-controller@0d006400 {
compatible = "nintendo,hollywood-si",
"nintendo,flipper-si";
reg = <0x0d006400 0x100>;
interrupts = <3>;
};
audio@0c006c00 {
compatible = "nintendo,hollywood-ai",
"nintendo,flipper-ai";
reg = <0x0d006c00 0x20>;
interrupts = <6>;
};
/* External Interface bus */
exi@0d006800 {
compatible = "nintendo,hollywood-exi",
"nintendo,flipper-exi";
reg = <0x0d006800 0x40>;
virtual-reg = <0x0d006800>;
interrupts = <4>;
};
usb@0d040000 {
compatible = "nintendo,hollywood-usb-ehci",
"usb-ehci";
reg = <0x0d040000 0x100>;
interrupts = <4>;
interrupt-parent = <&PIC1>;
};
usb@0d050000 {
compatible = "nintendo,hollywood-usb-ohci",
"usb-ohci";
reg = <0x0d050000 0x100>;
interrupts = <5>;
interrupt-parent = <&PIC1>;
};
usb@0d060000 {
compatible = "nintendo,hollywood-usb-ohci",
"usb-ohci";
reg = <0x0d060000 0x100>;
interrupts = <6>;
interrupt-parent = <&PIC1>;
};
sd@0d070000 {
compatible = "nintendo,hollywood-sdhci",
"sdhci";
reg = <0x0d070000 0x200>;
interrupts = <7>;
interrupt-parent = <&PIC1>;
};
sdio@0d080000 {
compatible = "nintendo,hollywood-sdhci",
"sdhci";
reg = <0x0d080000 0x200>;
interrupts = <8>;
interrupt-parent = <&PIC1>;
};
ipc@0d000000 {
compatible = "nintendo,hollywood-ipc";
reg = <0x0d000000 0x10>;
interrupts = <30>;
interrupt-parent = <&PIC1>;
};
PIC1: pic1@0d800030 {
#interrupt-cells = <1>;
compatible = "nintendo,hollywood-pic";
reg = <0x0d800030 0x10>;
interrupt-controller;
interrupts = <14>;
};
GPIO: gpio@0d8000c0 {
#gpio-cells = <2>;
compatible = "nintendo,hollywood-gpio";
reg = <0x0d8000c0 0x40>;
gpio-controller;
/*
* This is commented out while a standard binding
* for i2c over gpio is defined.
*/
/*
i2c-video {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
gpios = <&GPIO 15 0
&GPIO 14 0>;
clock-frequency = <250000>;
no-clock-stretching;
scl-is-open-drain;
sda-is-open-drain;
sda-enforce-dir;
AVE: audio-video-encoder@70 {
compatible = "nintendo,wii-audio-video-encoder";
reg = <0x70>;
};
};
*/
};
control@0d800100 {
compatible = "nintendo,hollywood-control";
reg = <0x0d800100 0x300>;
};
disk@0d806000 {
compatible = "nintendo,hollywood-di";
reg = <0x0d806000 0x40>;
interrupts = <2>;
};
};
};
arch/powerpc/boot/gamecube-head.S 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/gamecube-head.S
*
* Nintendo GameCube bootwrapper entry.
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include "ppc_asm.h"
/*
* The entry code does no assumptions regarding:
* - if the data and instruction caches are enabled or not
* - if the MMU is enabled or not
*
* We enable the caches if not already enabled, enable the MMU with an
* identity mapping scheme and jump to the start code.
*/
.text
.globl _zimage_start
_zimage_start:
/* turn the MMU off */
mfmsr 9
rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */
bcl 20, 31, 1f
1:
mflr 8
clrlwi 8, 8, 3 /* convert to a real address */
addi 8, 8, _mmu_off - 1b
mtsrr0 8
mtsrr1 9
rfi
_mmu_off:
/* MMU disabled */
/* setup BATs */
isync
li 8, 0
mtspr 0x210, 8 /* IBAT0U */
mtspr 0x212, 8 /* IBAT1U */
mtspr 0x214, 8 /* IBAT2U */
mtspr 0x216, 8 /* IBAT3U */
mtspr 0x218, 8 /* DBAT0U */
mtspr 0x21a, 8 /* DBAT1U */
mtspr 0x21c, 8 /* DBAT2U */
mtspr 0x21e, 8 /* DBAT3U */
li 8, 0x01ff /* first 16MiB */
li 9, 0x0002 /* rw */
mtspr 0x211, 9 /* IBAT0L */
mtspr 0x210, 8 /* IBAT0U */
mtspr 0x219, 9 /* DBAT0L */
mtspr 0x218, 8 /* DBAT0U */
lis 8, 0x0c00 /* I/O mem */
ori 8, 8, 0x3ff /* 32MiB */
lis 9, 0x0c00
ori 9, 9, 0x002a /* uncached, guarded, rw */
mtspr 0x21b, 9 /* DBAT1L */
mtspr 0x21a, 8 /* DBAT1U */
lis 8, 0x0100 /* next 8MiB */
ori 8, 8, 0x00ff /* 8MiB */
lis 9, 0x0100
ori 9, 9, 0x0002 /* rw */
mtspr 0x215, 9 /* IBAT2L */
mtspr 0x214, 8 /* IBAT2U */
mtspr 0x21d, 9 /* DBAT2L */
mtspr 0x21c, 8 /* DBAT2U */
/* enable and invalidate the caches if not already enabled */
mfspr 8, 0x3f0 /* HID0 */
andi. 0, 8, (1<<15) /* HID0_ICE */
bne 1f
ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/
1:
andi. 0, 8, (1<<14) /* HID0_DCE */
bne 1f
ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/
1:
mtspr 0x3f0, 8 /* HID0 */
isync
/* initialize arguments */
li 3, 0
li 4, 0
li 5, 0
/* turn the MMU on */
bcl 20, 31, 1f
1:
mflr 8
addi 8, 8, _mmu_on - 1b
mfmsr 9
ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */
mtsrr0 8
mtsrr1 9
sync
rfi
_mmu_on:
b _zimage_start_lib
arch/powerpc/boot/gamecube.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/gamecube.c
*
* Nintendo GameCube bootwrapper support
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include <stddef.h>
#include "stdio.h"
#include "types.h"
#include "io.h"
#include "ops.h"
#include "ugecon.h"
BSS_STACK(8192);
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
{
u32 heapsize = 16*1024*1024 - (u32)_end;
simple_alloc_init(_end, heapsize, 32, 64);
fdt_init(_dtb_start);
if (ug_probe())
console_ops.write = ug_console_write;
}
arch/powerpc/boot/ugecon.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/ugecon.c
*
* USB Gecko bootwrapper console.
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include <stddef.h>
#include "stdio.h"
#include "types.h"
#include "io.h"
#include "ops.h"
#define EXI_CLK_32MHZ 5
#define EXI_CSR 0x00
#define EXI_CSR_CLKMASK (0x7<<4)
#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4)
#define EXI_CSR_CSMASK (0x7<<7)
#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */
#define EXI_CR 0x0c
#define EXI_CR_TSTART (1<<0)
#define EXI_CR_WRITE (1<<2)
#define EXI_CR_READ_WRITE (2<<2)
#define EXI_CR_TLEN(len) (((len)-1)<<4)
#define EXI_DATA 0x10
/* virtual address base for input/output, retrieved from device tree */
static void *ug_io_base;
static u32 ug_io_transaction(u32 in)
{
u32 *csr_reg = ug_io_base + EXI_CSR;
u32 *data_reg = ug_io_base + EXI_DATA;
u32 *cr_reg = ug_io_base + EXI_CR;
u32 csr, data, cr;
/* select */
csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
out_be32(csr_reg, csr);
/* read/write */
data = in;
out_be32(data_reg, data);
cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
out_be32(cr_reg, cr);
while (in_be32(cr_reg) & EXI_CR_TSTART)
barrier();
/* deselect */
out_be32(csr_reg, 0);
data = in_be32(data_reg);
return data;
}
static int ug_is_txfifo_ready(void)
{
return ug_io_transaction(0xc0000000) & 0x04000000;
}
static void ug_raw_putc(char ch)
{
ug_io_transaction(0xb0000000 | (ch << 20));
}
static void ug_putc(char ch)
{
int count = 16;
if (!ug_io_base)
return;
while (!ug_is_txfifo_ready() && count--)
barrier();
if (count)
ug_raw_putc(ch);
}
void ug_console_write(const char *buf, int len)
{
char *b = (char *)buf;
while (len--) {
if (*b == '\n')
ug_putc('\r');
ug_putc(*b++);
}
}
static int ug_is_adapter_present(void)
{
if (!ug_io_base)
return 0;
return ug_io_transaction(0x90000000) == 0x04700000;
}
static void *ug_grab_exi_io_base(void)
{
u32 v;
void *devp;
devp = find_node_by_compatible(NULL, "nintendo,flipper-exi");
if (devp == NULL)
goto err_out;
if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
goto err_out;
return (void *)v;
err_out:
return NULL;
}
void *ug_probe(void)
{
void *exi_io_base;
int i;
exi_io_base = ug_grab_exi_io_base();
if (!exi_io_base)
return NULL;
/* look for a usbgecko on memcard slots A and B */
for (i = 0; i < 2; i++) {
ug_io_base = exi_io_base + 0x14 * i;
if (ug_is_adapter_present())
break;
}
if (i == 2)
ug_io_base = NULL;
return ug_io_base;
}
arch/powerpc/boot/ugecon.h 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/ugecon.h
*
* USB Gecko early bootwrapper console.
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#ifndef __UGECON_H
#define __UGECON_H
extern void *ug_probe(void);
extern void ug_putc(char ch);
extern void ug_console_write(const char *buf, int len);
#endif /* __UGECON_H */
arch/powerpc/boot/wii-head.S 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/wii-head.S
*
* Nintendo Wii bootwrapper entry.
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include "ppc_asm.h"
/*
* The entry code does no assumptions regarding:
* - if the data and instruction caches are enabled or not
* - if the MMU is enabled or not
* - if the high BATs are enabled or not
*
* We enable the high BATs, enable the caches if not already enabled,
* enable the MMU with an identity mapping scheme and jump to the start code.
*/
.text
.globl _zimage_start
_zimage_start:
/* turn the MMU off */
mfmsr 9
rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */
bcl 20, 31, 1f
1:
mflr 8
clrlwi 8, 8, 3 /* convert to a real address */
addi 8, 8, _mmu_off - 1b
mtsrr0 8
mtsrr1 9
rfi
_mmu_off:
/* MMU disabled */
/* setup BATs */
isync
li 8, 0
mtspr 0x210, 8 /* IBAT0U */
mtspr 0x212, 8 /* IBAT1U */
mtspr 0x214, 8 /* IBAT2U */
mtspr 0x216, 8 /* IBAT3U */
mtspr 0x218, 8 /* DBAT0U */
mtspr 0x21a, 8 /* DBAT1U */
mtspr 0x21c, 8 /* DBAT2U */
mtspr 0x21e, 8 /* DBAT3U */
mtspr 0x230, 8 /* IBAT4U */
mtspr 0x232, 8 /* IBAT5U */
mtspr 0x234, 8 /* IBAT6U */
mtspr 0x236, 8 /* IBAT7U */
mtspr 0x238, 8 /* DBAT4U */
mtspr 0x23a, 8 /* DBAT5U */
mtspr 0x23c, 8 /* DBAT6U */
mtspr 0x23e, 8 /* DBAT7U */
li 8, 0x01ff /* first 16MiB */
li 9, 0x0002 /* rw */
mtspr 0x211, 9 /* IBAT0L */
mtspr 0x210, 8 /* IBAT0U */
mtspr 0x219, 9 /* DBAT0L */
mtspr 0x218, 8 /* DBAT0U */
lis 8, 0x0c00 /* I/O mem */
ori 8, 8, 0x3ff /* 32MiB */
lis 9, 0x0c00
ori 9, 9, 0x002a /* uncached, guarded, rw */
mtspr 0x21b, 9 /* DBAT1L */
mtspr 0x21a, 8 /* DBAT1U */
lis 8, 0x0100 /* next 8MiB */
ori 8, 8, 0x00ff /* 8MiB */
lis 9, 0x0100
ori 9, 9, 0x0002 /* rw */
mtspr 0x215, 9 /* IBAT2L */
mtspr 0x214, 8 /* IBAT2U */
mtspr 0x21d, 9 /* DBAT2L */
mtspr 0x21c, 8 /* DBAT2U */
lis 8, 0x1000 /* MEM2 */
ori 8, 8, 0x07ff /* 64MiB */
lis 9, 0x1000
ori 9, 9, 0x0002 /* rw */
mtspr 0x216, 8 /* IBAT3U */
mtspr 0x217, 9 /* IBAT3L */
mtspr 0x21e, 8 /* DBAT3U */
mtspr 0x21f, 9 /* DBAT3L */
/* enable the high BATs */
mfspr 8, 0x3f3 /* HID4 */
oris 8, 8, 0x0200
mtspr 0x3f3, 8 /* HID4 */
/* enable and invalidate the caches if not already enabled */
mfspr 8, 0x3f0 /* HID0 */
andi. 0, 8, (1<<15) /* HID0_ICE */
bne 1f
ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/
1:
andi. 0, 8, (1<<14) /* HID0_DCE */
bne 1f
ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/
1:
mtspr 0x3f0, 8 /* HID0 */
isync
/* initialize arguments */
li 3, 0
li 4, 0
li 5, 0
/* turn the MMU on */
bcl 20, 31, 1f
1:
mflr 8
addi 8, 8, _mmu_on - 1b
mfmsr 9
ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */
mtsrr0 8
mtsrr1 9
sync
rfi
_mmu_on:
/* turn on the front blue led (aka: yay! we got here!) */
lis 8, 0x0d00
ori 8, 8, 0x00c0
lwz 9, 0(8)
ori 9, 9, 0x20
stw 9, 0(8)
b _zimage_start_lib
arch/powerpc/boot/wii.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/boot/wii.c
*
* Nintendo Wii bootwrapper support
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include <stddef.h>
#include "stdio.h"
#include "types.h"
#include "io.h"
#include "ops.h"
#include "ugecon.h"
BSS_STACK(8192);
#define HW_REG(x) ((void *)(x))
#define EXI_CTRL HW_REG(0x0d800070)
#define EXI_CTRL_ENABLE (1<<0)
#define MEM2_TOP (0x10000000 + 64*1024*1024)
#define FIRMWARE_DEFAULT_SIZE (12*1024*1024)
struct mipc_infohdr {
char magic[3];
u8 version;
u32 mem2_boundary;
u32 ipc_in;
size_t ipc_in_size;
u32 ipc_out;
size_t ipc_out_size;
};
static int mipc_check_address(u32 pa)
{
/* only MEM2 addresses */
if (pa < 0x10000000 || pa > 0x14000000)
return -EINVAL;
return 0;
}
static struct mipc_infohdr *mipc_get_infohdr(void)
{
struct mipc_infohdr **hdrp, *hdr;
/* 'mini' header pointer is the last word of MEM2 memory */
hdrp = (struct mipc_infohdr **)0x13fffffc;
if (mipc_check_address((u32)hdrp)) {
printf("mini: invalid hdrp %08X\n", (u32)hdrp);
hdr = NULL;
goto out;
}
hdr = *hdrp;
if (mipc_check_address((u32)hdr)) {
printf("mini: invalid hdr %08X\n", (u32)hdr);
hdr = NULL;
goto out;
}
if (memcmp(hdr->magic, "IPC", 3)) {
printf("mini: invalid magic\n");
hdr = NULL;
goto out;
}
out:
return hdr;
}
static int mipc_get_mem2_boundary(u32 *mem2_boundary)
{
struct mipc_infohdr *hdr;
int error;
hdr = mipc_get_infohdr();
if (!hdr) {
error = -1;
goto out;
}
if (mipc_check_address(hdr->mem2_boundary)) {
printf("mini: invalid mem2_boundary %08X\n",
hdr->mem2_boundary);
error = -EINVAL;
goto out;
}
*mem2_boundary = hdr->mem2_boundary;
error = 0;
out:
return error;
}
static void platform_fixups(void)
{
void *mem;
u32 reg[4];
u32 mem2_boundary;
int len;
int error;
mem = finddevice("/memory");
if (!mem)
fatal("Can't find memory node\n");
/* two ranges of (address, size) words */
len = getprop(mem, "reg", reg, sizeof(reg));
if (len != sizeof(reg)) {
/* nothing to do */
goto out;
}
/* retrieve MEM2 boundary from 'mini' */
error = mipc_get_mem2_boundary(&mem2_boundary);
if (error) {
/* if that fails use a sane value */
mem2_boundary = MEM2_TOP - FIRMWARE_DEFAULT_SIZE;
}
if (mem2_boundary > reg[2] && mem2_boundary < reg[2] + reg[3]) {
reg[3] = mem2_boundary - reg[2];
printf("top of MEM2 @ %08X\n", reg[2] + reg[3]);
setprop(mem, "reg", reg, sizeof(reg));
}
out:
return;
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
{
u32 heapsize = 24*1024*1024 - (u32)_end;
simple_alloc_init(_end, heapsize, 32, 64);
fdt_init(_dtb_start);
/*
* 'mini' boots the Broadway processor with EXI disabled.
* We need it enabled before probing for the USB Gecko.
*/
out_be32(EXI_CTRL, in_be32(EXI_CTRL) | EXI_CTRL_ENABLE);
if (ug_probe())
console_ops.write = ug_console_write;
platform_ops.fixups = platform_fixups;
}
arch/powerpc/boot/wrapper
View file @ a73611b6
......@@ -230,6 +230,10 @@ xpedite52*)
link_address='0x1400000'
platformo=$object/cuboot-85xx.o
;;
gamecube|wii)
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
......
arch/powerpc/configs/gamecube_defconfig 0 → 100644
View file @ a73611b6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc8
# Sun Nov 22 21:07:30 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-gcn"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_FREEZER is not set
#
# Platform support
#
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_GAMECUBE_COMMON=y
CONFIG_USBGECKO_UDBG=y
CONFIG_FLIPPER_PIC=y
CONFIG_GAMECUBE=y
# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_PAGE_OFFSET_BOOL is not set
CONFIG_PAGE_OFFSET=0xc0000000
# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0xc0000000
# CONFIG_CONSISTENT_SIZE_BOOL is not set
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_OF is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PPC=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
CONFIG_PPC_EARLY_DEBUG_USBGECKO=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
arch/powerpc/configs/wii_defconfig 0 → 100644
View file @ a73611b6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc8
# Sun Nov 22 20:37:21 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-wii"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_FREEZER is not set
#
# Platform support
#
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_GAMECUBE_COMMON=y
CONFIG_USBGECKO_UDBG=y
CONFIG_FLIPPER_PIC=y
# CONFIG_GAMECUBE is not set
CONFIG_HLWD_PIC=y
CONFIG_STARLET_MINI=y
CONFIG_WII=y
# CONFIG_AMIGAONE is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_PAGE_OFFSET_BOOL is not set
CONFIG_PAGE_OFFSET=0xc0000000
# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0xc0000000
# CONFIG_CONSISTENT_SIZE_BOOL is not set
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not set
# CONFIG_B43LEGACY is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_OF is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PPC=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
CONFIG_HID_APPLE=m
CONFIG_HID_WACOM=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_OF is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
CONFIG_PPC_EARLY_DEBUG_USBGECKO=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
arch/powerpc/include/asm/fixmap.h
View file @ a73611b6
......@@ -44,6 +44,9 @@
*/
enum fixed_addresses {
FIX_HOLE,
/* reserve the top 128K for early debugging purposes */
FIX_EARLY_DEBUG_TOP = FIX_HOLE,
FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+((128*1024)/PAGE_SIZE)-1,
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
......
arch/powerpc/include/asm/udbg.h
View file @ a73611b6
......@@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void);
extern void __init udbg_init_44x_as1(void);
extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
extern void __init udbg_init_usbgecko(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
arch/powerpc/kernel/cputable.c
View file @ a73611b6
......@@ -697,9 +697,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "ppc750",
},
{ /* 750CL */
.pvr_mask = 0xfffff0f0,
.pvr_value = 0x00087010,
{ /* 750CL (and "Broadway") */
.pvr_mask = 0xfffff0e0,
.pvr_value = 0x00087000,
.cpu_name = "750CL",
.cpu_features = CPU_FTRS_750CL,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
......
arch/powerpc/kernel/head_32.S
View file @ a73611b6
......@@ -164,6 +164,9 @@ __after_mmu_off:
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
bl setup_cpm_bat
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
bl setup_usbgecko_bat
#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
......@@ -1203,6 +1206,28 @@ setup_cpm_bat:
blr
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
setup_usbgecko_bat:
/* prepare a BAT for early io */
#if defined(CONFIG_GAMECUBE)
lis r8, 0x0c00
#elif defined(CONFIG_WII)
lis r8, 0x0d00
#else
#error Invalid platform for USB Gecko based early debugging.
#endif
/*
* The virtual address used must match the virtual address
* associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
*/
lis r11, 0xfffe /* top 128K */
ori r8, r8, 0x002a /* uncached, guarded ,rw */
ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */
mtspr SPRN_DBAT1L, r8
mtspr SPRN_DBAT1U, r11
blr
#endif
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
......
arch/powerpc/kernel/udbg.c
View file @ a73611b6
......@@ -60,6 +60,8 @@ void __init udbg_early_init(void)
udbg_init_40x_realmode();
#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
udbg_init_cpm();
#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
udbg_init_usbgecko();
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG
......
arch/powerpc/mm/40x_mmu.c
View file @ a73611b6
......@@ -91,7 +91,7 @@ void __init MMU_init_hw(void)
#define LARGE_PAGE_SIZE_16M (1<<24)
#define LARGE_PAGE_SIZE_4M (1<<22)
unsigned long __init mmu_mapin_ram(void)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long v, s, mapped;
phys_addr_t p;
......
arch/powerpc/mm/44x_mmu.c
View file @ a73611b6
......@@ -88,7 +88,7 @@ void __init MMU_init_hw(void)
flush_instruction_cache();
}
unsigned long __init mmu_mapin_ram(void)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long addr;
......
arch/powerpc/mm/fsl_booke_mmu.c
View file @ a73611b6
......@@ -207,7 +207,7 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
return amount_mapped;
}
unsigned long __init mmu_mapin_ram(void)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
}
......
arch/powerpc/mm/init_32.c
View file @ a73611b6
......@@ -82,6 +82,11 @@ extern struct task_struct *current_set[NR_CPUS];
int __map_without_bats;
int __map_without_ltlbs;
/*
* This tells the system to allow ioremapping memory marked as reserved.
*/
int __allow_ioremap_reserved;
/* max amount of low RAM to map in */
unsigned long __max_low_memory = MAX_LOW_MEM;
......@@ -131,9 +136,13 @@ void __init MMU_init(void)
MMU_setup();
if (lmb.memory.cnt > 1) {
#ifndef CONFIG_WII
lmb.memory.cnt = 1;
lmb_analyze();
printk(KERN_WARNING "Only using first contiguous memory region");
#else
wii_memory_fixups();
#endif
}
total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
......
arch/powerpc/mm/mmu_decl.h
View file @ a73611b6
......@@ -104,6 +104,7 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
extern int __map_without_bats;
extern int __allow_ioremap_reserved;
extern unsigned long ioremap_base;
extern unsigned int rtas_data, rtas_size;
......@@ -125,24 +126,32 @@ extern phys_addr_t total_lowmem;
extern phys_addr_t memstart_addr;
extern phys_addr_t lowmem_end_addr;
#ifdef CONFIG_WII
extern unsigned long wii_hole_start;
extern unsigned long wii_hole_size;
extern unsigned long wii_mmu_mapin_mem2(unsigned long top);
extern void wii_memory_fixups(void);
#endif
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
*/
#if defined(CONFIG_8xx)
#define MMU_init_hw() do { } while(0)
#define mmu_mapin_ram() (0UL)
#define mmu_mapin_ram(top) (0UL)
#elif defined(CONFIG_4xx)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
#elif defined(CONFIG_FSL_BOOKE)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
#elif defined(CONFIG_PPC32)
/* anything 32-bit except 4xx or 8xx */
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
#endif
arch/powerpc/mm/pgtable_32.c
View file @ a73611b6
......@@ -26,6 +26,7 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/lmb.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
......@@ -191,7 +192,8 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
* Don't allow anybody to remap normal RAM that we're using.
* mem_init() sets high_memory so only do the check after that.
*/
if (mem_init_done && (p < virt_to_phys(high_memory))) {
if (mem_init_done && (p < virt_to_phys(high_memory)) &&
!(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
(unsigned long long)p, __builtin_return_address(0));
return NULL;
......@@ -283,18 +285,18 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
}
/*
* Map in a big chunk of physical memory starting at PAGE_OFFSET.
* Map in a chunk of physical memory starting at start.
*/
void __init mapin_ram(void)
void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
{
unsigned long v, s, f;
phys_addr_t p;
int ktext;
s = mmu_mapin_ram();
s = offset;
v = PAGE_OFFSET + s;
p = memstart_addr + s;
for (; s < total_lowmem; s += PAGE_SIZE) {
for (; s < top; s += PAGE_SIZE) {
ktext = ((char *) v >= _stext && (char *) v < etext);
f = ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL;
map_page(v, p, f);
......@@ -307,6 +309,30 @@ void __init mapin_ram(void)
}
}
void __init mapin_ram(void)
{
unsigned long s, top;
#ifndef CONFIG_WII
top = total_lowmem;
s = mmu_mapin_ram(top);
__mapin_ram_chunk(s, top);
#else
if (!wii_hole_size) {
s = mmu_mapin_ram(total_lowmem);
__mapin_ram_chunk(s, total_lowmem);
} else {
top = wii_hole_start;
s = mmu_mapin_ram(top);
__mapin_ram_chunk(s, top);
top = lmb_end_of_DRAM();
s = wii_mmu_mapin_mem2(top);
__mapin_ram_chunk(s, top);
}
#endif
}
/* Scan the real Linux page tables and return a PTE pointer for
* a virtual address in a context.
* Returns true (1) if PTE was found, zero otherwise. The pointer to
......
arch/powerpc/mm/ppc_mmu_32.c
View file @ a73611b6
......@@ -72,7 +72,7 @@ unsigned long p_mapped_by_bats(phys_addr_t pa)
return 0;
}
unsigned long __init mmu_mapin_ram(void)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
......@@ -86,7 +86,7 @@ unsigned long __init mmu_mapin_ram(void)
/* Make sure we don't map a block larger than the
smallest alignment of the physical address. */
tot = total_lowmem;
tot = top;
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > tot)
break;
......
arch/powerpc/platforms/Kconfig.cputype
View file @ a73611b6
......@@ -311,7 +311,7 @@ config NR_CPUS
config NOT_COHERENT_CACHE
bool
depends on 4xx || 8xx || E200 || PPC_MPC512x
depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
default y
config CHECK_CACHE_COHERENCY
......
arch/powerpc/platforms/embedded6xx/Kconfig
View file @ a73611b6
......@@ -90,3 +90,36 @@ config MPC10X_OPENPIC
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
config GAMECUBE_COMMON
bool
config USBGECKO_UDBG
bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
depends on GAMECUBE_COMMON
help
If you say yes to this option, support will be included for the
USB Gecko adapter as an udbg console.
The USB Gecko is a EXI to USB Serial converter that can be plugged
into a memcard slot in the Nintendo GameCube/Wii.
This driver bypasses the EXI layer completely.
If in doubt, say N here.
config GAMECUBE
bool "Nintendo-GameCube"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select GAMECUBE if configuring for the Nintendo GameCube.
More information at: <http://gc-linux.sourceforge.net/>
config WII
bool "Nintendo-Wii"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>
arch/powerpc/platforms/embedded6xx/Makefile
View file @ a73611b6
......@@ -7,3 +7,7 @@ obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
obj-$(CONFIG_WII) += wii.o hlwd-pic.o
arch/powerpc/platforms/embedded6xx/flipper-pic.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/flipper-pic.c
*
* Nintendo GameCube/Wii "Flipper" interrupt controller support.
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2007,2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#define DRV_MODULE_NAME "flipper-pic"
#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <asm/io.h>
#include "flipper-pic.h"
#define FLIPPER_NR_IRQS 32
/*
* Each interrupt has a corresponding bit in both
* the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
*
* Enabling/disabling an interrupt line involves setting/clearing
* the corresponding bit in IMR.
* Except for the RSW interrupt, all interrupts get deasserted automatically
* when the source deasserts the interrupt.
*/
#define FLIPPER_ICR 0x00
#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */
#define FLIPPER_IMR 0x04
#define FLIPPER_RESET 0x24
/*
* IRQ chip hooks.
*
*/
static void flipper_pic_mask_and_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
u32 mask = 1 << irq;
clrbits32(io_base + FLIPPER_IMR, mask);
/* this is at least needed for RSW */
out_be32(io_base + FLIPPER_ICR, mask);
}
static void flipper_pic_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
/* this is at least needed for RSW */
out_be32(io_base + FLIPPER_ICR, 1 << irq);
}
static void flipper_pic_mask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
clrbits32(io_base + FLIPPER_IMR, 1 << irq);
}
static void flipper_pic_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
setbits32(io_base + FLIPPER_IMR, 1 << irq);
}
static struct irq_chip flipper_pic = {
.name = "flipper-pic",
.ack = flipper_pic_ack,
.mask_ack = flipper_pic_mask_and_ack,
.mask = flipper_pic_mask,
.unmask = flipper_pic_unmask,
};
/*
* IRQ host hooks.
*
*/
static struct irq_host *flipper_irq_host;
static int flipper_pic_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
set_irq_chip_data(virq, h->host_data);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq);
return 0;
}
static void flipper_pic_unmap(struct irq_host *h, unsigned int irq)
{
set_irq_chip_data(irq, NULL);
set_irq_chip(irq, NULL);
}
static int flipper_pic_match(struct irq_host *h, struct device_node *np)
{
return 1;
}
static struct irq_host_ops flipper_irq_host_ops = {
.map = flipper_pic_map,
.unmap = flipper_pic_unmap,
.match = flipper_pic_match,
};
/*
* Platform hooks.
*
*/
static void __flipper_quiesce(void __iomem *io_base)
{
/* mask and ack all IRQs */
out_be32(io_base + FLIPPER_IMR, 0x00000000);
out_be32(io_base + FLIPPER_ICR, 0xffffffff);
}
struct irq_host * __init flipper_pic_init(struct device_node *np)
{
struct device_node *pi;
struct irq_host *irq_host = NULL;
struct resource res;
void __iomem *io_base;
int retval;
pi = of_get_parent(np);
if (!pi) {
pr_err("no parent found\n");
goto out;
}
if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) {
pr_err("unexpected parent compatible\n");
goto out;
}
retval = of_address_to_resource(pi, 0, &res);
if (retval) {
pr_err("no io memory range found\n");
goto out;
}
io_base = ioremap(res.start, resource_size(&res));
pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
__flipper_quiesce(io_base);
irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS,
&flipper_irq_host_ops, -1);
if (!irq_host) {
pr_err("failed to allocate irq_host\n");
return NULL;
}
irq_host->host_data = io_base;
out:
return irq_host;
}
unsigned int flipper_pic_get_irq(void)
{
void __iomem *io_base = flipper_irq_host->host_data;
int irq;
u32 irq_status;
irq_status = in_be32(io_base + FLIPPER_ICR) &
in_be32(io_base + FLIPPER_IMR);
if (irq_status == 0)
return NO_IRQ; /* no more IRQs pending */
irq = __ffs(irq_status);
return irq_linear_revmap(flipper_irq_host, irq);
}
/*
* Probe function.
*
*/
void __init flipper_pic_probe(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic");
BUG_ON(!np);
flipper_irq_host = flipper_pic_init(np);
BUG_ON(!flipper_irq_host);
irq_set_default_host(flipper_irq_host);
of_node_put(np);
}
/*
* Misc functions related to the flipper chipset.
*
*/
/**
* flipper_quiesce() - quiesce flipper irq controller
*
* Mask and ack all interrupt sources.
*
*/
void flipper_quiesce(void)
{
void __iomem *io_base = flipper_irq_host->host_data;
__flipper_quiesce(io_base);
}
/*
* Resets the platform.
*/
void flipper_platform_reset(void)
{
void __iomem *io_base;
if (flipper_irq_host && flipper_irq_host->host_data) {
io_base = flipper_irq_host->host_data;
out_8(io_base + FLIPPER_RESET, 0x00);
}
}
/*
* Returns non-zero if the reset button is pressed.
*/
int flipper_is_reset_button_pressed(void)
{
void __iomem *io_base;
u32 icr;
if (flipper_irq_host && flipper_irq_host->host_data) {
io_base = flipper_irq_host->host_data;
icr = in_be32(io_base + FLIPPER_ICR);
return !(icr & FLIPPER_ICR_RSS);
}
return 0;
}
arch/powerpc/platforms/embedded6xx/flipper-pic.h 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/flipper-pic.h
*
* Nintendo GameCube/Wii "Flipper" interrupt controller support.
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2007,2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#ifndef __FLIPPER_PIC_H
#define __FLIPPER_PIC_H
unsigned int flipper_pic_get_irq(void);
void __init flipper_pic_probe(void);
void flipper_quiesce(void);
void flipper_platform_reset(void);
int flipper_is_reset_button_pressed(void);
#endif
arch/powerpc/platforms/embedded6xx/gamecube.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/gamecube.c
*
* Nintendo GameCube board-specific support
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2007,2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kexec.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/udbg.h>
#include "flipper-pic.h"
#include "usbgecko_udbg.h"
static void gamecube_spin(void)
{
/* spin until power button pressed */
for (;;)
cpu_relax();
}
static void gamecube_restart(char *cmd)
{
local_irq_disable();
flipper_platform_reset();
gamecube_spin();
}
static void gamecube_power_off(void)
{
local_irq_disable();
gamecube_spin();
}
static void gamecube_halt(void)
{
gamecube_restart(NULL);
}
static void __init gamecube_init_early(void)
{
ug_udbg_init();
}
static int __init gamecube_probe(void)
{
unsigned long dt_root;
dt_root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube"))
return 0;
return 1;
}
static void gamecube_shutdown(void)
{
flipper_quiesce();
}
#ifdef CONFIG_KEXEC
static int gamecube_kexec_prepare(struct kimage *image)
{
return 0;
}
#endif /* CONFIG_KEXEC */
define_machine(gamecube) {
.name = "gamecube",
.probe = gamecube_probe,
.init_early = gamecube_init_early,
.restart = gamecube_restart,
.power_off = gamecube_power_off,
.halt = gamecube_halt,
.init_IRQ = flipper_pic_probe,
.get_irq = flipper_pic_get_irq,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
.machine_shutdown = gamecube_shutdown,
#ifdef CONFIG_KEXEC
.machine_kexec_prepare = gamecube_kexec_prepare,
#endif
};
static struct of_device_id gamecube_of_bus[] = {
{ .compatible = "nintendo,flipper", },
{ },
};
static int __init gamecube_device_probe(void)
{
if (!machine_is(gamecube))
return 0;
of_platform_bus_probe(NULL, gamecube_of_bus, NULL);
return 0;
}
device_initcall(gamecube_device_probe);
arch/powerpc/platforms/embedded6xx/hlwd-pic.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/hlwd-pic.c
*
* Nintendo Wii "Hollywood" interrupt controller support.
* Copyright (C) 2009 The GameCube Linux Team
* Copyright (C) 2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#define DRV_MODULE_NAME "hlwd-pic"
#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <asm/io.h>
#include "hlwd-pic.h"
#define HLWD_NR_IRQS 32
/*
* Each interrupt has a corresponding bit in both
* the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
*
* Enabling/disabling an interrupt line involves asserting/clearing
* the corresponding bit in IMR. ACK'ing a request simply involves
* asserting the corresponding bit in ICR.
*/
#define HW_BROADWAY_ICR 0x00
#define HW_BROADWAY_IMR 0x04
/*
* IRQ chip hooks.
*
*/
static void hlwd_pic_mask_and_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
u32 mask = 1 << irq;
clrbits32(io_base + HW_BROADWAY_IMR, mask);
out_be32(io_base + HW_BROADWAY_ICR, mask);
}
static void hlwd_pic_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
out_be32(io_base + HW_BROADWAY_ICR, 1 << irq);
}
static void hlwd_pic_mask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
}
static void hlwd_pic_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void __iomem *io_base = get_irq_chip_data(virq);
setbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
}
static struct irq_chip hlwd_pic = {
.name = "hlwd-pic",
.ack = hlwd_pic_ack,
.mask_ack = hlwd_pic_mask_and_ack,
.mask = hlwd_pic_mask,
.unmask = hlwd_pic_unmask,
};
/*
* IRQ host hooks.
*
*/
static struct irq_host *hlwd_irq_host;
static int hlwd_pic_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
set_irq_chip_data(virq, h->host_data);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq);
return 0;
}
static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq)
{
set_irq_chip_data(irq, NULL);
set_irq_chip(irq, NULL);
}
static struct irq_host_ops hlwd_irq_host_ops = {
.map = hlwd_pic_map,
.unmap = hlwd_pic_unmap,
};
static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
{
void __iomem *io_base = h->host_data;
int irq;
u32 irq_status;
irq_status = in_be32(io_base + HW_BROADWAY_ICR) &
in_be32(io_base + HW_BROADWAY_IMR);
if (irq_status == 0)
return NO_IRQ; /* no more IRQs pending */
irq = __ffs(irq_status);
return irq_linear_revmap(h, irq);
}
static void hlwd_pic_irq_cascade(unsigned int cascade_virq,
struct irq_desc *desc)
{
struct irq_host *irq_host = get_irq_data(cascade_virq);
unsigned int virq;
spin_lock(&desc->lock);
desc->chip->mask(cascade_virq); /* IRQ_LEVEL */
spin_unlock(&desc->lock);
virq = __hlwd_pic_get_irq(irq_host);
if (virq != NO_IRQ)
generic_handle_irq(virq);
else
pr_err("spurious interrupt!\n");
spin_lock(&desc->lock);
desc->chip->ack(cascade_virq); /* IRQ_LEVEL */
if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
desc->chip->unmask(cascade_virq);
spin_unlock(&desc->lock);
}
/*
* Platform hooks.
*
*/
static void __hlwd_quiesce(void __iomem *io_base)
{
/* mask and ack all IRQs */
out_be32(io_base + HW_BROADWAY_IMR, 0);
out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff);
}
struct irq_host *hlwd_pic_init(struct device_node *np)
{
struct irq_host *irq_host;
struct resource res;
void __iomem *io_base;
int retval;
retval = of_address_to_resource(np, 0, &res);
if (retval) {
pr_err("no io memory range found\n");
return NULL;
}
io_base = ioremap(res.start, resource_size(&res));
if (!io_base) {
pr_err("ioremap failed\n");
return NULL;
}
pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
__hlwd_quiesce(io_base);
irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS,
&hlwd_irq_host_ops, -1);
if (!irq_host) {
pr_err("failed to allocate irq_host\n");
return NULL;
}
irq_host->host_data = io_base;
return irq_host;
}
unsigned int hlwd_pic_get_irq(void)
{
return __hlwd_pic_get_irq(hlwd_irq_host);
}
/*
* Probe function.
*
*/
void hlwd_pic_probe(void)
{
struct irq_host *host;
struct device_node *np;
const u32 *interrupts;
int cascade_virq;
for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") {
interrupts = of_get_property(np, "interrupts", NULL);
if (interrupts) {
host = hlwd_pic_init(np);
BUG_ON(!host);
cascade_virq = irq_of_parse_and_map(np, 0);
set_irq_data(cascade_virq, host);
set_irq_chained_handler(cascade_virq,
hlwd_pic_irq_cascade);
hlwd_irq_host = host;
break;
}
}
}
/**
* hlwd_quiesce() - quiesce hollywood irq controller
*
* Mask and ack all interrupt sources.
*
*/
void hlwd_quiesce(void)
{
void __iomem *io_base = hlwd_irq_host->host_data;
__hlwd_quiesce(io_base);
}
arch/powerpc/platforms/embedded6xx/hlwd-pic.h 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/hlwd-pic.h
*
* Nintendo Wii "Hollywood" interrupt controller support.
* Copyright (C) 2009 The GameCube Linux Team
* Copyright (C) 2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#ifndef __HLWD_PIC_H
#define __HLWD_PIC_H
extern unsigned int hlwd_pic_get_irq(void);
extern void hlwd_pic_probe(void);
extern void hlwd_quiesce(void);
#endif
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
*
* udbg serial input/output routines for the USB Gecko adapter.
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#include <mm/mmu_decl.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/fixmap.h>
#include "usbgecko_udbg.h"
#define EXI_CLK_32MHZ 5
#define EXI_CSR 0x00
#define EXI_CSR_CLKMASK (0x7<<4)
#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4)
#define EXI_CSR_CSMASK (0x7<<7)
#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */
#define EXI_CR 0x0c
#define EXI_CR_TSTART (1<<0)
#define EXI_CR_WRITE (1<<2)
#define EXI_CR_READ_WRITE (2<<2)
#define EXI_CR_TLEN(len) (((len)-1)<<4)
#define EXI_DATA 0x10
#define UG_READ_ATTEMPTS 100
#define UG_WRITE_ATTEMPTS 100
static void __iomem *ug_io_base;
/*
* Performs one input/output transaction between the exi host and the usbgecko.
*/
static u32 ug_io_transaction(u32 in)
{
u32 __iomem *csr_reg = ug_io_base + EXI_CSR;
u32 __iomem *data_reg = ug_io_base + EXI_DATA;
u32 __iomem *cr_reg = ug_io_base + EXI_CR;
u32 csr, data, cr;
/* select */
csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
out_be32(csr_reg, csr);
/* read/write */
data = in;
out_be32(data_reg, data);
cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
out_be32(cr_reg, cr);
while (in_be32(cr_reg) & EXI_CR_TSTART)
barrier();
/* deselect */
out_be32(csr_reg, 0);
/* result */
data = in_be32(data_reg);
return data;
}
/*
* Returns true if an usbgecko adapter is found.
*/
static int ug_is_adapter_present(void)
{
if (!ug_io_base)
return 0;
return ug_io_transaction(0x90000000) == 0x04700000;
}
/*
* Returns true if the TX fifo is ready for transmission.
*/
static int ug_is_txfifo_ready(void)
{
return ug_io_transaction(0xc0000000) & 0x04000000;
}
/*
* Tries to transmit a character.
* If the TX fifo is not ready the result is undefined.
*/
static void ug_raw_putc(char ch)
{
ug_io_transaction(0xb0000000 | (ch << 20));
}
/*
* Transmits a character.
* It silently fails if the TX fifo is not ready after a number of retries.
*/
static void ug_putc(char ch)
{
int count = UG_WRITE_ATTEMPTS;
if (!ug_io_base)
return;
if (ch == '\n')
ug_putc('\r');
while (!ug_is_txfifo_ready() && count--)
barrier();
if (count)
ug_raw_putc(ch);
}
/*
* Returns true if the RX fifo is ready for transmission.
*/
static int ug_is_rxfifo_ready(void)
{
return ug_io_transaction(0xd0000000) & 0x04000000;
}
/*
* Tries to receive a character.
* If a character is unavailable the function returns -1.
*/
static int ug_raw_getc(void)
{
u32 data = ug_io_transaction(0xa0000000);
if (data & 0x08000000)
return (data >> 16) & 0xff;
else
return -1;
}
/*
* Receives a character.
* It fails if the RX fifo is not ready after a number of retries.
*/
static int ug_getc(void)
{
int count = UG_READ_ATTEMPTS;
if (!ug_io_base)
return -1;
while (!ug_is_rxfifo_ready() && count--)
barrier();
return ug_raw_getc();
}
/*
* udbg functions.
*
*/
/*
* Transmits a character.
*/
void ug_udbg_putc(char ch)
{
ug_putc(ch);
}
/*
* Receives a character. Waits until a character is available.
*/
static int ug_udbg_getc(void)
{
int ch;
while ((ch = ug_getc()) == -1)
barrier();
return ch;
}
/*
* Receives a character. If a character is not available, returns -1.
*/
static int ug_udbg_getc_poll(void)
{
if (!ug_is_rxfifo_ready())
return -1;
return ug_getc();
}
/*
* Retrieves and prepares the virtual address needed to access the hardware.
*/
static void __iomem *ug_udbg_setup_exi_io_base(struct device_node *np)
{
void __iomem *exi_io_base = NULL;
phys_addr_t paddr;
const unsigned int *reg;
reg = of_get_property(np, "reg", NULL);
if (reg) {
paddr = of_translate_address(np, reg);
if (paddr)
exi_io_base = ioremap(paddr, reg[1]);
}
return exi_io_base;
}
/*
* Checks if a USB Gecko adapter is inserted in any memory card slot.
*/
static void __iomem *ug_udbg_probe(void __iomem *exi_io_base)
{
int i;
/* look for a usbgecko on memcard slots A and B */
for (i = 0; i < 2; i++) {
ug_io_base = exi_io_base + 0x14 * i;
if (ug_is_adapter_present())
break;
}
if (i == 2)
ug_io_base = NULL;
return ug_io_base;
}
/*
* USB Gecko udbg support initialization.
*/
void __init ug_udbg_init(void)
{
struct device_node *np;
void __iomem *exi_io_base;
if (ug_io_base)
udbg_printf("%s: early -> final\n", __func__);
np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi");
if (!np) {
udbg_printf("%s: EXI node not found\n", __func__);
goto done;
}
exi_io_base = ug_udbg_setup_exi_io_base(np);
if (!exi_io_base) {
udbg_printf("%s: failed to setup EXI io base\n", __func__);
goto done;
}
if (!ug_udbg_probe(exi_io_base)) {
udbg_printf("usbgecko_udbg: not found\n");
iounmap(exi_io_base);
} else {
udbg_putc = ug_udbg_putc;
udbg_getc = ug_udbg_getc;
udbg_getc_poll = ug_udbg_getc_poll;
udbg_printf("usbgecko_udbg: ready\n");
}
done:
if (np)
of_node_put(np);
return;
}
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
static phys_addr_t __init ug_early_grab_io_addr(void)
{
#if defined(CONFIG_GAMECUBE)
return 0x0c000000;
#elif defined(CONFIG_WII)
return 0x0d000000;
#else
#error Invalid platform for USB Gecko based early debugging.
#endif
}
/*
* USB Gecko early debug support initialization for udbg.
*/
void __init udbg_init_usbgecko(void)
{
void __iomem *early_debug_area;
void __iomem *exi_io_base;
/*
* At this point we have a BAT already setup that enables I/O
* to the EXI hardware.
*
* The BAT uses a virtual address range reserved at the fixmap.
* This must match the virtual address configured in
* head_32.S:setup_usbgecko_bat().
*/
early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE);
exi_io_base = early_debug_area + 0x00006800;
/* try to detect a USB Gecko */
if (!ug_udbg_probe(exi_io_base))
return;
/* we found a USB Gecko, load udbg hooks */
udbg_putc = ug_udbg_putc;
udbg_getc = ug_udbg_getc;
udbg_getc_poll = ug_udbg_getc_poll;
/*
* Prepare again the same BAT for MMU_init.
* This allows udbg I/O to continue working after the MMU is
* turned on for real.
* It is safe to continue using the same virtual address as it is
* a reserved fixmap area.
*/
setbat(1, (unsigned long)early_debug_area,
ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG);
}
#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
*
* udbg serial input/output routines for the USB Gecko adapter.
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#ifndef __USBGECKO_UDBG_H
#define __USBGECKO_UDBG_H
#ifdef CONFIG_USBGECKO_UDBG
extern void __init ug_udbg_init(void);
#else
static inline void __init ug_udbg_init(void)
{
}
#endif /* CONFIG_USBGECKO_UDBG */
void __init udbg_init_usbgecko(void);
#endif /* __USBGECKO_UDBG_H */
arch/powerpc/platforms/embedded6xx/wii.c 0 → 100644
View file @ a73611b6
/*
* arch/powerpc/platforms/embedded6xx/wii.c
*
* Nintendo Wii board-specific support
* Copyright (C) 2008-2009 The GameCube Linux Team
* Copyright (C) 2008,2009 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#define DRV_MODULE_NAME "wii"
#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kexec.h>
#include <linux/of_platform.h>
#include <linux/lmb.h>
#include <mm/mmu_decl.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/udbg.h>
#include "flipper-pic.h"
#include "hlwd-pic.h"
#include "usbgecko_udbg.h"
/* control block */
#define HW_CTRL_COMPATIBLE "nintendo,hollywood-control"
#define HW_CTRL_RESETS 0x94
#define HW_CTRL_RESETS_SYS (1<<0)
/* gpio */
#define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio"
#define HW_GPIO_BASE(idx) (idx * 0x20)
#define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0)
#define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4)
#define HW_GPIO_SHUTDOWN (1<<1)
#define HW_GPIO_SLOT_LED (1<<5)
#define HW_GPIO_SENSOR_BAR (1<<8)
static void __iomem *hw_ctrl;
static void __iomem *hw_gpio;
unsigned long wii_hole_start;
unsigned long wii_hole_size;
static int __init page_aligned(unsigned long x)
{
return !(x & (PAGE_SIZE-1));
}
void __init wii_memory_fixups(void)
{
struct lmb_property *p = lmb.memory.region;
/*
* This is part of a workaround to allow the use of two
* discontiguous RAM ranges on the Wii, even if this is
* currently unsupported on 32-bit PowerPC Linux.
*
* We coealesce the two memory ranges of the Wii into a
* single range, then create a reservation for the "hole"
* between both ranges.
*/
BUG_ON(lmb.memory.cnt != 2);
BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE);
wii_hole_start = p[0].base + p[0].size;
wii_hole_size = p[1].base - wii_hole_start;
pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size);
pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size);
pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size);
p[0].size += wii_hole_size + p[1].size;
lmb.memory.cnt = 1;
lmb_analyze();
/* reserve the hole */
lmb_reserve(wii_hole_start, wii_hole_size);
/* allow ioremapping the address space in the hole */
__allow_ioremap_reserved = 1;
}
unsigned long __init wii_mmu_mapin_mem2(unsigned long top)
{
unsigned long delta, size, bl;
unsigned long max_size = (256<<20);
/* MEM2 64MB@0x10000000 */
delta = wii_hole_start + wii_hole_size;
size = top - delta;
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > size)
break;
}
setbat(4, PAGE_OFFSET+delta, delta, bl, PAGE_KERNEL_X);
return delta + bl;
}
static void wii_spin(void)
{
local_irq_disable();
for (;;)
cpu_relax();
}
static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible)
{
void __iomem *hw_regs = NULL;
struct device_node *np;
struct resource res;
int error = -ENODEV;
np = of_find_compatible_node(NULL, NULL, compatible);
if (!np) {
pr_err("no compatible node found for %s\n", compatible);
goto out;
}
error = of_address_to_resource(np, 0, &res);
if (error) {
pr_err("no valid reg found for %s\n", np->name);
goto out_put;
}
hw_regs = ioremap(res.start, resource_size(&res));
if (hw_regs) {
pr_info("%s at 0x%08x mapped to 0x%p\n", name,
res.start, hw_regs);
}
out_put:
of_node_put(np);
out:
return hw_regs;
}
static void __init wii_setup_arch(void)
{
hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE);
hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE);
if (hw_gpio) {
/* turn off the front blue led and IR light */
clrbits32(hw_gpio + HW_GPIO_OUT(0),
HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR);
}
}
static void wii_restart(char *cmd)
{
local_irq_disable();
if (hw_ctrl) {
/* clear the system reset pin to cause a reset */
clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS);
}
wii_spin();
}
static void wii_power_off(void)
{
local_irq_disable();
if (hw_gpio) {
/* make sure that the poweroff GPIO is configured as output */
setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN);
/* drive the poweroff GPIO high */
setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN);
}
wii_spin();
}
static void wii_halt(void)
{
if (ppc_md.restart)
ppc_md.restart(NULL);
wii_spin();
}
static void __init wii_init_early(void)
{
ug_udbg_init();
}
static void __init wii_pic_probe(void)
{
flipper_pic_probe();
hlwd_pic_probe();
}
static int __init wii_probe(void)
{
unsigned long dt_root;
dt_root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(dt_root, "nintendo,wii"))
return 0;
return 1;
}
static void wii_shutdown(void)
{
hlwd_quiesce();
flipper_quiesce();
}
#ifdef CONFIG_KEXEC
static int wii_machine_kexec_prepare(struct kimage *image)
{
return 0;
}
#endif /* CONFIG_KEXEC */
define_machine(wii) {
.name = "wii",
.probe = wii_probe,
.init_early = wii_init_early,
.setup_arch = wii_setup_arch,
.restart = wii_restart,
.power_off = wii_power_off,
.halt = wii_halt,
.init_IRQ = wii_pic_probe,
.get_irq = flipper_pic_get_irq,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
.machine_shutdown = wii_shutdown,
#ifdef CONFIG_KEXEC
.machine_kexec_prepare = wii_machine_kexec_prepare,
#endif
};
static struct of_device_id wii_of_bus[] = {
{ .compatible = "nintendo,hollywood", },
{ },
};
static int __init wii_device_probe(void)
{
if (!machine_is(wii))
return 0;
of_platform_bus_probe(NULL, wii_of_bus, NULL);
return 0;
}
device_initcall(wii_device_probe);
include/linux/lmb.h
View file @ a73611b6
......@@ -54,6 +54,7 @@ extern u64 __init lmb_phys_mem_size(void);
extern u64 lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
extern int lmb_is_region_reserved(u64 base, u64 size);
extern int lmb_find(struct lmb_property *res);
extern void lmb_dump_all(void);
......
lib/lmb.c
View file @ a73611b6
......@@ -263,7 +263,7 @@ long __init lmb_reserve(u64 base, u64 size)
return lmb_add_region(_rgn, base, size);
}
long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
{
unsigned long i;
......@@ -493,6 +493,11 @@ int __init lmb_is_reserved(u64 addr)
return 0;
}
int lmb_is_region_reserved(u64 base, u64 size)
{
return lmb_overlaps_region(&lmb.reserved, base, size);
}
/*
* Given a <base, len>, find which memory regions belong to this range.
* Adjust the request and return a contiguous chunk.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7