Commit a73ed350 authored by Suneel Garapati's avatar Suneel Garapati Committed by Tejun Heo

drivers: ata: add support for Ceva sata host controller

Adds support for Ceva sata host controller on Xilinx
Zynq UltraScale+ MPSoC.
Signed-off-by: default avatarSuneel Garapati <suneel.garapati@xilinx.com>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent 03a740fb
......@@ -133,6 +133,15 @@ config AHCI_IMX
If unsure, say N.
config AHCI_CEVA
tristate "CEVA AHCI SATA support"
depends on OF
help
This option enables support for the CEVA AHCI SATA.
It can be found on the Xilinx Zynq UltraScale+ MPSoC.
If unsure, say N.
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
......
......@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
......
/*
* Copyright (C) 2015 Xilinx, Inc.
* CEVA AHCI SATA platform driver
*
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/ahci_platform.h>
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include "ahci.h"
/* Vendor Specific Register Offsets */
#define AHCI_VEND_PCFG 0xA4
#define AHCI_VEND_PPCFG 0xA8
#define AHCI_VEND_PP2C 0xAC
#define AHCI_VEND_PP3C 0xB0
#define AHCI_VEND_PP4C 0xB4
#define AHCI_VEND_PP5C 0xB8
#define AHCI_VEND_PAXIC 0xC0
#define AHCI_VEND_PTC 0xC8
/* Vendor Specific Register bit definitions */
#define PAXIC_ADBW_BW64 0x1
#define PAXIC_MAWIDD (1 << 8)
#define PAXIC_MARIDD (1 << 16)
#define PAXIC_OTL (0x4 << 20)
#define PCFG_TPSS_VAL (0x32 << 16)
#define PCFG_TPRS_VAL (0x2 << 12)
#define PCFG_PAD_VAL 0x2
#define PPCFG_TTA 0x1FFFE
#define PPCFG_PSSO_EN (1 << 28)
#define PPCFG_PSS_EN (1 << 29)
#define PPCFG_ESDF_EN (1 << 31)
#define PP2C_CIBGMN 0x0F
#define PP2C_CIBGMX (0x25 << 8)
#define PP2C_CIBGN (0x18 << 16)
#define PP2C_CINMP (0x29 << 24)
#define PP3C_CWBGMN 0x04
#define PP3C_CWBGMX (0x0B << 8)
#define PP3C_CWBGN (0x08 << 16)
#define PP3C_CWNMP (0x0F << 24)
#define PP4C_BMX 0x0a
#define PP4C_BNM (0x08 << 8)
#define PP4C_SFD (0x4a << 16)
#define PP4C_PTST (0x06 << 24)
#define PP5C_RIT 0x60216
#define PP5C_RCT (0x7f0 << 20)
#define PTC_RX_WM_VAL 0x40
#define PTC_RSVD (1 << 27)
#define PORT0_BASE 0x100
#define PORT1_BASE 0x180
/* Port Control Register Bit Definitions */
#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
#define PORT_SCTL_IPM (0x3 << 8)
#define PORT_BASE 0x100
#define PORT_OFFSET 0x80
#define NR_PORTS 2
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
struct ceva_ahci_priv {
struct platform_device *ahci_pdev;
int flags;
};
static struct ata_port_operations ahci_ceva_ops = {
.inherits = &ahci_platform_ops,
};
static const struct ata_port_info ahci_ceva_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ceva_ops,
};
static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
{
void __iomem *mmio = hpriv->mmio;
struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
u32 tmp;
int i;
/*
* AXI Data bus width to 64
* Set Mem Addr Read, Write ID for data transfers
* Transfer limit to 72 DWord
*/
tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
writel(tmp, mmio + AHCI_VEND_PAXIC);
/* Set AHCI Enable */
tmp = readl(mmio + HOST_CTL);
tmp |= HOST_AHCI_EN;
writel(tmp, mmio + HOST_CTL);
for (i = 0; i < NR_PORTS; i++) {
/* TPSS TPRS scalars, CISE and Port Addr */
tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
writel(tmp, mmio + AHCI_VEND_PCFG);
/* Port Phy Cfg register enables */
tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
writel(tmp, mmio + AHCI_VEND_PPCFG);
/* Phy Control OOB timing parameters COMINIT */
tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP;
writel(tmp, mmio + AHCI_VEND_PP2C);
/* Phy Control OOB timing parameters COMWAKE */
tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP;
writel(tmp, mmio + AHCI_VEND_PP3C);
/* Phy Control Burst timing setting */
tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST;
writel(tmp, mmio + AHCI_VEND_PP4C);
/* Rate Change Timer and Retry Interval Timer setting */
tmp = PP5C_RIT | PP5C_RCT;
writel(tmp, mmio + AHCI_VEND_PP5C);
/* Rx Watermark setting */
tmp = PTC_RX_WM_VAL | PTC_RSVD;
writel(tmp, mmio + AHCI_VEND_PTC);
/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
}
}
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
static int ceva_ahci_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct ceva_ahci_priv *cevapriv;
int rc;
cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
if (!cevapriv)
return -ENOMEM;
cevapriv->ahci_pdev = pdev;
hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
if (of_property_read_bool(np, "ceva,broken-gen2"))
cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
hpriv->plat_data = cevapriv;
/* CEVA specific initialization */
ahci_ceva_setup(hpriv);
rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
&ahci_platform_sht);
if (rc)
goto disable_resources;
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
static int __maybe_unused ceva_ahci_suspend(struct device *dev)
{
return ahci_platform_suspend_host(dev);
}
static int __maybe_unused ceva_ahci_resume(struct device *dev)
{
return ahci_platform_resume_host(dev);
}
static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
static const struct of_device_id ceva_ahci_of_match[] = {
{ .compatible = "ceva,ahci-1v84" },
{},
};
MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
static struct platform_driver ceva_ahci_driver = {
.probe = ceva_ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = DRV_NAME,
.of_match_table = ceva_ahci_of_match,
.pm = &ahci_ceva_pm_ops,
},
};
module_platform_driver(ceva_ahci_driver);
MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
MODULE_AUTHOR("Xilinx Inc.");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment