Commit a7750c3e authored by Pankaj Dubey's avatar Pankaj Dubey Committed by Wolfram Sang

i2c: s3c2410: Handle i2c sys_cfg register in i2c driver

Let's handle i2c interrupt re-configuration in i2c driver. This will
help us in removing some soc specific checks from machine files and
will help in removing static iomapping of SYS register in exynos.c

Also handle saving and restoring of SYS_I2C_CFG register during
suspend and resume of i2c driver.
Signed-off-by: default avatarPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 80f1774f
...@@ -35,6 +35,8 @@ ...@@ -35,6 +35,8 @@
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_gpio.h> #include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/consumer.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -87,6 +89,9 @@ ...@@ -87,6 +89,9 @@
/* Max time to wait for bus to become idle after a xfer (in us) */ /* Max time to wait for bus to become idle after a xfer (in us) */
#define S3C2410_IDLE_TIMEOUT 5000 #define S3C2410_IDLE_TIMEOUT 5000
/* Exynos5 Sysreg offset */
#define EXYNOS5_SYS_I2C_CFG 0x0234
/* i2c controller state */ /* i2c controller state */
enum s3c24xx_i2c_state { enum s3c24xx_i2c_state {
STATE_IDLE, STATE_IDLE,
...@@ -123,6 +128,8 @@ struct s3c24xx_i2c { ...@@ -123,6 +128,8 @@ struct s3c24xx_i2c {
#if defined(CONFIG_ARM_S3C24XX_CPUFREQ) #if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
struct notifier_block freq_transition; struct notifier_block freq_transition;
#endif #endif
struct regmap *sysreg;
unsigned int sys_i2c_cfg;
}; };
static struct platform_device_id s3c24xx_driver_ids[] = { static struct platform_device_id s3c24xx_driver_ids[] = {
...@@ -1071,6 +1078,7 @@ static void ...@@ -1071,6 +1078,7 @@ static void
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
{ {
struct s3c2410_platform_i2c *pdata = i2c->pdata; struct s3c2410_platform_i2c *pdata = i2c->pdata;
int id;
if (!np) if (!np)
return; return;
...@@ -1080,6 +1088,21 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) ...@@ -1080,6 +1088,21 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr); of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
of_property_read_u32(np, "samsung,i2c-max-bus-freq", of_property_read_u32(np, "samsung,i2c-max-bus-freq",
(u32 *)&pdata->frequency); (u32 *)&pdata->frequency);
/*
* Exynos5's legacy i2c controller and new high speed i2c
* controller have muxed interrupt sources. By default the
* interrupts for 4-channel HS-I2C controller are enabled.
* If nodes for first four channels of legacy i2c controller
* are available then re-configure the interrupts via the
* system register.
*/
id = of_alias_get_id(np, "i2c");
i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
"samsung,sysreg-phandle");
if (IS_ERR(i2c->sysreg))
return;
regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
} }
#else #else
static void static void
...@@ -1260,6 +1283,9 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev) ...@@ -1260,6 +1283,9 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
i2c->suspended = 1; i2c->suspended = 1;
if (!IS_ERR(i2c->sysreg))
regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
return 0; return 0;
} }
...@@ -1268,6 +1294,9 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev) ...@@ -1268,6 +1294,9 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
struct platform_device *pdev = to_platform_device(dev); struct platform_device *pdev = to_platform_device(dev);
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
if (!IS_ERR(i2c->sysreg))
regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg);
clk_prepare_enable(i2c->clk); clk_prepare_enable(i2c->clk);
s3c24xx_i2c_init(i2c); s3c24xx_i2c_init(i2c);
clk_disable_unprepare(i2c->clk); clk_disable_unprepare(i2c->clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment