Merge tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "Most of these have been sitting in linux-next for more than a release,
  particularly commit 0fbcf4af ("ipmi: Convert the IPMI SI ACPI
  handling to a platform device") which is probably the most complex
  patch.

  That is also the one that changes drivers/acpi/acpi_pnp.c.  The change
  in that file is only removing IPMI from a "special platform devices"
  list, since I convert it to the standard PNP interface.  I posted this
  one to the ACPI list twice and got no response, and it seems to work
  well in my testing, so I'm hoping it's good.

  Hidehiro Kawai posted a set of changes that improves the panic time
  handling in the IPMI driver.

  The rest of the changes are minor bug fixes or cleanups and some
  documentation"

* tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi:ssif: Add a module parm to specify that SMBus alerts don't work
  ipmi: add of_device_id in MODULE_DEVICE_TABLE
  ipmi: Compensate for BMCs that wont set the irq enable bit
  ipmi: Don't call receive handler in the panic context
  ipmi: Avoid touching possible corrupted lists in the panic context
  ipmi: Don't flush messages in sender() in run-to-completion mode
  ipmi: Factor out message flushing procedure
  ipmi: Remove unneeded set_run_to_completion call
  ipmi: Make some data const that was only read
  ipmi: constify SSIF ACPI device ids
  ipmi: Delete an unnecessary check before the function call "cleanup_one_si"
  char:ipmi - Change 1 to true for bool type variables during initialization.
  impi:Remove unneeded setting of module owner to THIS_MODULE in the platform structure, powernv_ipmi_driver
  ipmi: Add a comment in how messages are delivered from the lower layer
  ipmi/powernv: Fix potential invalid pointer dereference
  ipmi: Convert the IPMI SI ACPI handling to a platform device
  ipmi: Add device tree bindings information

Documentation/devicetree/bindings/ipmi.txt

+IPMI device
+
+Required properties:
+- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
+- device_type: should be ipmi
+- reg: Address and length of the register set for the device
+
+Optional properties:
+- interrupts: The interrupt for the device.  Without this the interface
+	is polled.
+- reg-size - The size of the register.  Defaults to 1
+- reg-spacing - The number of bytes between register starts.  Defaults to 1
+- reg-shift - The amount to shift the registers to the right to get the data
+	into bit zero.
+
+Example:
+
+smic@fff3a000 {
+	compatible = "ipmi-smic";
+	device_type = "ipmi";
+	reg = <0xfff3a000 0x1000>;
+	interrupts = <0 24 4>;
+	reg-size = <4>;
+	reg-spacing = <4>;
+};

drivers/acpi/acpi_pnp.c

@@ -19,8 +19,6 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{"PNP0600"},		/* Generic ESDI/IDE/ATA compatible hard disk controller */
 	/* floppy */
 	{"PNP0700"},
-	/* ipmi_si */
-	{"IPI0001"},
 	/* tpm_inf_pnp */
 	{"IFX0101"},		/* Infineon TPMs */
 	{"IFX0102"},		/* Infineon TPMs */

drivers/char/ipmi/ipmi_bt_sm.c

@@ -694,7 +694,7 @@ static int bt_size(void)
 	return sizeof(struct si_sm_data);
 }
 
-struct si_sm_handlers bt_smi_handlers = {
+const struct si_sm_handlers bt_smi_handlers = {
 	.init_data		= bt_init_data,
 	.start_transaction	= bt_start_transaction,
 	.get_result		= bt_get_result,

drivers/char/ipmi/ipmi_kcs_sm.c

@@ -540,7 +540,7 @@ static void kcs_cleanup(struct si_sm_data *kcs)
 {
 }
 
-struct si_sm_handlers kcs_smi_handlers = {
+const struct si_sm_handlers kcs_smi_handlers = {
 	.init_data         = init_kcs_data,
 	.start_transaction = start_kcs_transaction,
 	.get_result        = get_kcs_result,

drivers/char/ipmi/ipmi_msghandler.c

@@ -342,7 +342,7 @@ struct ipmi_smi {
 	 * an umpreemptible region to use this.  You must fetch the
 	 * value into a local variable and make sure it is not NULL.
 	 */
-	struct ipmi_smi_handlers *handlers;
+	const struct ipmi_smi_handlers *handlers;
 	void                     *send_info;
 
 #ifdef CONFIG_PROC_FS
@@ -744,7 +744,13 @@ static void deliver_response(struct ipmi_recv_msg *msg)
 			ipmi_inc_stat(intf, unhandled_local_responses);
 		}
 		ipmi_free_recv_msg(msg);
-	} else {
+	} else if (!oops_in_progress) {
+		/*
+		 * If we are running in the panic context, calling the
+		 * receive handler doesn't much meaning and has a deadlock
+		 * risk.  At this moment, simply skip it in that case.
+		 */
+
 		ipmi_user_t user = msg->user;
 		user->handler->ipmi_recv_hndl(msg, user->handler_data);
 	}
@@ -1015,7 +1021,7 @@ int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data)
 {
 	int           rv = 0;
 	ipmi_smi_t    intf;
-	struct ipmi_smi_handlers *handlers;
+	const struct ipmi_smi_handlers *handlers;
 
 	mutex_lock(&ipmi_interfaces_mutex);
 	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
@@ -1501,7 +1507,7 @@ static struct ipmi_smi_msg *smi_add_send_msg(ipmi_smi_t intf,
 }
 
 
-static void smi_send(ipmi_smi_t intf, struct ipmi_smi_handlers *handlers,
+static void smi_send(ipmi_smi_t intf, const struct ipmi_smi_handlers *handlers,
 		     struct ipmi_smi_msg *smi_msg, int priority)
 {
 	int run_to_completion = intf->run_to_completion;
@@ -2747,7 +2753,7 @@ void ipmi_poll_interface(ipmi_user_t user)
 }
 EXPORT_SYMBOL(ipmi_poll_interface);
 
-int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
+int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
 		      void		       *send_info,
 		      struct ipmi_device_id    *device_id,
 		      struct device            *si_dev,
@@ -3959,6 +3965,10 @@ void ipmi_smi_msg_received(ipmi_smi_t          intf,
 
 	if (!run_to_completion)
 		spin_lock_irqsave(&intf->xmit_msgs_lock, flags);
+	/*
+	 * We can get an asynchronous event or receive message in addition
+	 * to commands we send.
+	 */
 	if (msg == intf->curr_msg)
 		intf->curr_msg = NULL;
 	if (!run_to_completion)
@@ -4015,7 +4025,7 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 			      unsigned int *waiting_msgs)
 {
 	struct ipmi_recv_msg     *msg;
-	struct ipmi_smi_handlers *handlers;
+	const struct ipmi_smi_handlers *handlers;
 
 	if (intf->in_shutdown)
 		return;
@@ -4082,7 +4092,7 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 				ipmi_inc_stat(intf,
 					      retransmitted_ipmb_commands);
 
-			smi_send(intf, intf->handlers, smi_msg, 0);
+			smi_send(intf, handlers, smi_msg, 0);
 		} else
 			ipmi_free_smi_msg(smi_msg);
 
@@ -4291,6 +4301,9 @@ static void ipmi_panic_request_and_wait(ipmi_smi_t           intf,
 			    0, 1); /* Don't retry, and don't wait. */
 	if (rv)
 		atomic_sub(2, &panic_done_count);
+	else if (intf->handlers->flush_messages)
+		intf->handlers->flush_messages(intf->send_info);
+
 	while (atomic_read(&panic_done_count) != 0)
 		ipmi_poll(intf);
 }
@@ -4364,9 +4377,7 @@ static void send_panic_events(char *str)
 			/* Interface is not ready. */
 			continue;
 
-		intf->run_to_completion = 1;
 		/* Send the event announcing the panic. */
-		intf->handlers->set_run_to_completion(intf->send_info, 1);
 		ipmi_panic_request_and_wait(intf, &addr, &msg);
 	}
 
@@ -4506,6 +4517,23 @@ static int panic_event(struct notifier_block *this,
 			/* Interface is not ready. */
 			continue;
 
+		/*
+		 * If we were interrupted while locking xmit_msgs_lock or
+		 * waiting_rcv_msgs_lock, the corresponding list may be
+		 * corrupted.  In this case, drop items on the list for
+		 * the safety.
+		 */
+		if (!spin_trylock(&intf->xmit_msgs_lock)) {
+			INIT_LIST_HEAD(&intf->xmit_msgs);
+			INIT_LIST_HEAD(&intf->hp_xmit_msgs);
+		} else
+			spin_unlock(&intf->xmit_msgs_lock);
+
+		if (!spin_trylock(&intf->waiting_rcv_msgs_lock))
+			INIT_LIST_HEAD(&intf->waiting_rcv_msgs);
+		else
+			spin_unlock(&intf->waiting_rcv_msgs_lock);
+
 		intf->run_to_completion = 1;
 		intf->handlers->set_run_to_completion(intf->send_info, 1);
 	}

drivers/char/ipmi/ipmi_powernv.c

@@ -143,8 +143,15 @@ static int ipmi_powernv_recv(struct ipmi_smi_powernv *smi)
 	pr_devel("%s:   -> %d (size %lld)\n", __func__,
 			rc, rc == 0 ? size : 0);
 	if (rc) {
+		/* If came via the poll, and response was not yet ready */
+		if (rc == OPAL_EMPTY) {
+			spin_unlock_irqrestore(&smi->msg_lock, flags);
+			return 0;
+		}
+
+		smi->cur_msg = NULL;
 		spin_unlock_irqrestore(&smi->msg_lock, flags);
-		ipmi_free_smi_msg(msg);
+		send_error_reply(smi, msg, IPMI_ERR_UNSPECIFIED);
 		return 0;
 	}
 
@@ -300,7 +307,6 @@ static const struct of_device_id ipmi_powernv_match[] = {
 static struct platform_driver powernv_ipmi_driver = {
 	.driver = {
 		.name		= "ipmi-powernv",
-		.owner		= THIS_MODULE,
 		.of_match_table	= ipmi_powernv_match,
 	},
 	.probe	= ipmi_powernv_probe,

drivers/char/ipmi/ipmi_si_intf.c

@@ -64,7 +64,6 @@
 #include <linux/dmi.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
-#include <linux/pnp.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -164,7 +163,7 @@ struct smi_info {
 	int                    intf_num;
 	ipmi_smi_t             intf;
 	struct si_sm_data      *si_sm;
-	struct si_sm_handlers  *handlers;
+	const struct si_sm_handlers *handlers;
 	enum si_type           si_type;
 	spinlock_t             si_lock;
 	struct ipmi_smi_msg    *waiting_msg;
@@ -263,9 +262,21 @@ struct smi_info {
 	bool supports_event_msg_buff;
 
 	/*
-	 * Can we clear the global enables receive irq bit?
+	 * Can we disable interrupts the global enables receive irq
+	 * bit?  There are currently two forms of brokenness, some
+	 * systems cannot disable the bit (which is technically within
+	 * the spec but a bad idea) and some systems have the bit
+	 * forced to zero even though interrupts work (which is
+	 * clearly outside the spec).  The next bool tells which form
+	 * of brokenness is present.
 	 */
-	bool cannot_clear_recv_irq_bit;
+	bool cannot_disable_irq;
+
+	/*
+	 * Some systems are broken and cannot set the irq enable
+	 * bit, even if they support interrupts.
+	 */
+	bool irq_enable_broken;
 
 	/*
 	 * Did we get an attention that we did not handle?
@@ -309,9 +320,6 @@ static int num_force_kipmid;
 #ifdef CONFIG_PCI
 static bool pci_registered;
 #endif
-#ifdef CONFIG_ACPI
-static bool pnp_registered;
-#endif
 #ifdef CONFIG_PARISC
 static bool parisc_registered;
 #endif
@@ -558,13 +566,14 @@ static u8 current_global_enables(struct smi_info *smi_info, u8 base,
 	if (smi_info->supports_event_msg_buff)
 		enables |= IPMI_BMC_EVT_MSG_BUFF;
 
-	if ((smi_info->irq && !smi_info->interrupt_disabled) ||
-	    smi_info->cannot_clear_recv_irq_bit)
+	if (((smi_info->irq && !smi_info->interrupt_disabled) ||
+	     smi_info->cannot_disable_irq) &&
+	    !smi_info->irq_enable_broken)
 		enables |= IPMI_BMC_RCV_MSG_INTR;
 
 	if (smi_info->supports_event_msg_buff &&
-	    smi_info->irq && !smi_info->interrupt_disabled)
-
+	    smi_info->irq && !smi_info->interrupt_disabled &&
+	    !smi_info->irq_enable_broken)
 		enables |= IPMI_BMC_EVT_MSG_INTR;
 
 	*irq_on = enables & (IPMI_BMC_EVT_MSG_INTR | IPMI_BMC_RCV_MSG_INTR);
@@ -928,33 +937,36 @@ static void check_start_timer_thread(struct smi_info *smi_info)
 	}
 }
 
+static void flush_messages(void *send_info)
+{
+	struct smi_info *smi_info = send_info;
+	enum si_sm_result result;
+
+	/*
+	 * Currently, this function is called only in run-to-completion
+	 * mode.  This means we are single-threaded, no need for locks.
+	 */
+	result = smi_event_handler(smi_info, 0);
+	while (result != SI_SM_IDLE) {
+		udelay(SI_SHORT_TIMEOUT_USEC);
+		result = smi_event_handler(smi_info, SI_SHORT_TIMEOUT_USEC);
+	}
+}
+
 static void sender(void                *send_info,
 		   struct ipmi_smi_msg *msg)
 {
 	struct smi_info   *smi_info = send_info;
-	enum si_sm_result result;
 	unsigned long     flags;
 
 	debug_timestamp("Enqueue");
 
 	if (smi_info->run_to_completion) {
 		/*
-		 * If we are running to completion, start it and run
-		 * transactions until everything is clear.
+		 * If we are running to completion, start it.  Upper
+		 * layer will call flush_messages to clear it out.
 		 */
 		smi_info->waiting_msg = msg;
-
-		/*
-		 * Run to completion means we are single-threaded, no
-		 * need for locks.
-		 */
-
-		result = smi_event_handler(smi_info, 0);
-		while (result != SI_SM_IDLE) {
-			udelay(SI_SHORT_TIMEOUT_USEC);
-			result = smi_event_handler(smi_info,
-						   SI_SHORT_TIMEOUT_USEC);
-		}
 		return;
 	}
 
@@ -975,17 +987,10 @@ static void sender(void                *send_info,
 static void set_run_to_completion(void *send_info, bool i_run_to_completion)
 {
 	struct smi_info   *smi_info = send_info;
-	enum si_sm_result result;
 
 	smi_info->run_to_completion = i_run_to_completion;
-	if (i_run_to_completion) {
-		result = smi_event_handler(smi_info, 0);
-		while (result != SI_SM_IDLE) {
-			udelay(SI_SHORT_TIMEOUT_USEC);
-			result = smi_event_handler(smi_info,
-						   SI_SHORT_TIMEOUT_USEC);
-		}
-	}
+	if (i_run_to_completion)
+		flush_messages(smi_info);
 }
 
 /*
@@ -1258,7 +1263,7 @@ static void set_maintenance_mode(void *send_info, bool enable)
 		atomic_set(&smi_info->req_events, 0);
 }
 
-static struct ipmi_smi_handlers handlers = {
+static const struct ipmi_smi_handlers handlers = {
 	.owner                  = THIS_MODULE,
 	.start_processing       = smi_start_processing,
 	.get_smi_info		= get_smi_info,
@@ -1267,6 +1272,7 @@ static struct ipmi_smi_handlers handlers = {
 	.set_need_watch		= set_need_watch,
 	.set_maintenance_mode   = set_maintenance_mode,
 	.set_run_to_completion  = set_run_to_completion,
+	.flush_messages		= flush_messages,
 	.poll			= poll,
 };
 
@@ -1283,14 +1289,14 @@ static int smi_num; /* Used to sequence the SMIs */
 #define DEFAULT_REGSIZE		1
 
 #ifdef CONFIG_ACPI
-static bool          si_tryacpi = 1;
+static bool          si_tryacpi = true;
 #endif
 #ifdef CONFIG_DMI
-static bool          si_trydmi = 1;
+static bool          si_trydmi = true;
 #endif
-static bool          si_tryplatform = 1;
+static bool          si_tryplatform = true;
 #ifdef CONFIG_PCI
-static bool          si_trypci = 1;
+static bool          si_trypci = true;
 #endif
 static bool          si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
 static char          *si_type[SI_MAX_PARMS];
@@ -1446,14 +1452,14 @@ static int std_irq_setup(struct smi_info *info)
 	return rv;
 }
 
-static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
+static unsigned char port_inb(const struct si_sm_io *io, unsigned int offset)
 {
 	unsigned int addr = io->addr_data;
 
 	return inb(addr + (offset * io->regspacing));
 }
 
-static void port_outb(struct si_sm_io *io, unsigned int offset,
+static void port_outb(const struct si_sm_io *io, unsigned int offset,
 		      unsigned char b)
 {
 	unsigned int addr = io->addr_data;
@@ -1461,14 +1467,14 @@ static void port_outb(struct si_sm_io *io, unsigned int offset,
 	outb(b, addr + (offset * io->regspacing));
 }
 
-static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
+static unsigned char port_inw(const struct si_sm_io *io, unsigned int offset)
 {
 	unsigned int addr = io->addr_data;
 
 	return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
 }
 
-static void port_outw(struct si_sm_io *io, unsigned int offset,
+static void port_outw(const struct si_sm_io *io, unsigned int offset,
 		      unsigned char b)
 {
 	unsigned int addr = io->addr_data;
@@ -1476,14 +1482,14 @@ static void port_outw(struct si_sm_io *io, unsigned int offset,
 	outw(b << io->regshift, addr + (offset * io->regspacing));
 }
 
-static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
+static unsigned char port_inl(const struct si_sm_io *io, unsigned int offset)
 {
 	unsigned int addr = io->addr_data;
 
 	return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
 }
 
-static void port_outl(struct si_sm_io *io, unsigned int offset,
+static void port_outl(const struct si_sm_io *io, unsigned int offset,
 		      unsigned char b)
 {
 	unsigned int addr = io->addr_data;
@@ -1556,49 +1562,52 @@ static int port_setup(struct smi_info *info)
 	return 0;
 }
 
-static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inb(const struct si_sm_io *io,
+				  unsigned int offset)
 {
 	return readb((io->addr)+(offset * io->regspacing));
 }
 
-static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
-		     unsigned char b)
+static void intf_mem_outb(const struct si_sm_io *io, unsigned int offset,
+			  unsigned char b)
 {
 	writeb(b, (io->addr)+(offset * io->regspacing));
 }
 
-static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inw(const struct si_sm_io *io,
+				  unsigned int offset)
 {
 	return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
 		& 0xff;
 }
 
-static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
-		     unsigned char b)
+static void intf_mem_outw(const struct si_sm_io *io, unsigned int offset,
+			  unsigned char b)
 {
 	writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
 }
 
-static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inl(const struct si_sm_io *io,
+				  unsigned int offset)
 {
 	return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
 		& 0xff;
 }
 
-static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
-		     unsigned char b)
+static void intf_mem_outl(const struct si_sm_io *io, unsigned int offset,
+			  unsigned char b)
 {
 	writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
 }
 
 #ifdef readq
-static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
+static unsigned char mem_inq(const struct si_sm_io *io, unsigned int offset)
 {
 	return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
 		& 0xff;
 }
 
-static void mem_outq(struct si_sm_io *io, unsigned int offset,
+static void mem_outq(const struct si_sm_io *io, unsigned int offset,
 		     unsigned char b)
 {
 	writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
@@ -2233,134 +2242,6 @@ static void spmi_find_bmc(void)
 		try_init_spmi(spmi);
 	}
 }
-
-static int ipmi_pnp_probe(struct pnp_dev *dev,
-				    const struct pnp_device_id *dev_id)
-{
-	struct acpi_device *acpi_dev;
-	struct smi_info *info;
-	struct resource *res, *res_second;
-	acpi_handle handle;
-	acpi_status status;
-	unsigned long long tmp;
-	int rv = -EINVAL;
-
-	acpi_dev = pnp_acpi_device(dev);
-	if (!acpi_dev)
-		return -ENODEV;
-
-	info = smi_info_alloc();
-	if (!info)
-		return -ENOMEM;
-
-	info->addr_source = SI_ACPI;
-	printk(KERN_INFO PFX "probing via ACPI\n");
-
-	handle = acpi_dev->handle;
-	info->addr_info.acpi_info.acpi_handle = handle;
-
-	/* _IFT tells us the interface type: KCS, BT, etc */
-	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
-	if (ACPI_FAILURE(status)) {
-		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
-		goto err_free;
-	}
-
-	switch (tmp) {
-	case 1:
-		info->si_type = SI_KCS;
-		break;
-	case 2:
-		info->si_type = SI_SMIC;
-		break;
-	case 3:
-		info->si_type = SI_BT;
-		break;
-	case 4: /* SSIF, just ignore */
-		rv = -ENODEV;
-		goto err_free;
-	default:
-		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
-		goto err_free;
-	}
-
-	res = pnp_get_resource(dev, IORESOURCE_IO, 0);
-	if (res) {
-		info->io_setup = port_setup;
-		info->io.addr_type = IPMI_IO_ADDR_SPACE;
-	} else {
-		res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
-		if (res) {
-			info->io_setup = mem_setup;
-			info->io.addr_type = IPMI_MEM_ADDR_SPACE;
-		}
-	}
-	if (!res) {
-		dev_err(&dev->dev, "no I/O or memory address\n");
-		goto err_free;
-	}
-	info->io.addr_data = res->start;
-
-	info->io.regspacing = DEFAULT_REGSPACING;
-	res_second = pnp_get_resource(dev,
-			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
-					IORESOURCE_IO : IORESOURCE_MEM,
-			       1);
-	if (res_second) {
-		if (res_second->start > info->io.addr_data)
-			info->io.regspacing = res_second->start - info->io.addr_data;
-	}
-	info->io.regsize = DEFAULT_REGSPACING;
-	info->io.regshift = 0;
-
-	/* If _GPE exists, use it; otherwise use standard interrupts */
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
-	if (ACPI_SUCCESS(status)) {
-		info->irq = tmp;
-		info->irq_setup = acpi_gpe_irq_setup;
-	} else if (pnp_irq_valid(dev, 0)) {
-		info->irq = pnp_irq(dev, 0);
-		info->irq_setup = std_irq_setup;
-	}
-
-	info->dev = &dev->dev;
-	pnp_set_drvdata(dev, info);
-
-	dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
-		 res, info->io.regsize, info->io.regspacing,
-		 info->irq);
-
-	rv = add_smi(info);
-	if (rv)
-		kfree(info);
-
-	return rv;
-
-err_free:
-	kfree(info);
-	return rv;
-}
-
-static void ipmi_pnp_remove(struct pnp_dev *dev)
-{
-	struct smi_info *info = pnp_get_drvdata(dev);
-
-	cleanup_one_si(info);
-}
-
-static const struct pnp_device_id pnp_dev_table[] = {
-	{"IPI0001", 0},
-	{"", 0},
-};
-
-static struct pnp_driver ipmi_pnp_driver = {
-	.name		= DEVICE_NAME,
-	.probe		= ipmi_pnp_probe,
-	.remove		= ipmi_pnp_remove,
-	.id_table	= pnp_dev_table,
-};
-
-MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
 #endif
 
 #ifdef CONFIG_DMI
@@ -2654,7 +2535,7 @@ static void ipmi_pci_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static struct pci_device_id ipmi_pci_devices[] = {
+static const struct pci_device_id ipmi_pci_devices[] = {
 	{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
 	{ PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
 	{ 0, }
@@ -2669,10 +2550,19 @@ static struct pci_driver ipmi_pci_driver = {
 };
 #endif /* CONFIG_PCI */
 
-static const struct of_device_id ipmi_match[];
-static int ipmi_probe(struct platform_device *dev)
-{
 #ifdef CONFIG_OF
+static const struct of_device_id of_ipmi_match[] = {
+	{ .type = "ipmi", .compatible = "ipmi-kcs",
+	  .data = (void *)(unsigned long) SI_KCS },
+	{ .type = "ipmi", .compatible = "ipmi-smic",
+	  .data = (void *)(unsigned long) SI_SMIC },
+	{ .type = "ipmi", .compatible = "ipmi-bt",
+	  .data = (void *)(unsigned long) SI_BT },
+	{},
+};
+
+static int of_ipmi_probe(struct platform_device *dev)
+{
 	const struct of_device_id *match;
 	struct smi_info *info;
 	struct resource resource;
@@ -2683,9 +2573,9 @@ static int ipmi_probe(struct platform_device *dev)
 
 	dev_info(&dev->dev, "probing via device tree\n");
 
-	match = of_match_device(ipmi_match, &dev->dev);
+	match = of_match_device(of_ipmi_match, &dev->dev);
 	if (!match)
-		return -EINVAL;
+		return -ENODEV;
 
 	if (!of_device_is_available(np))
 		return -EINVAL;
@@ -2754,33 +2644,160 @@ static int ipmi_probe(struct platform_device *dev)
 		kfree(info);
 		return ret;
 	}
-#endif
 	return 0;
 }
+MODULE_DEVICE_TABLE(of, of_ipmi_match);
+#else
+#define of_ipmi_match NULL
+static int of_ipmi_probe(struct platform_device *dev)
+{
+	return -ENODEV;
+}
+#endif
 
-static int ipmi_remove(struct platform_device *dev)
+#ifdef CONFIG_ACPI
+static int acpi_ipmi_probe(struct platform_device *dev)
 {
-#ifdef CONFIG_OF
-	cleanup_one_si(dev_get_drvdata(&dev->dev));
+	struct smi_info *info;
+	struct resource *res, *res_second;
+	acpi_handle handle;
+	acpi_status status;
+	unsigned long long tmp;
+	int rv = -EINVAL;
+
+	handle = ACPI_HANDLE(&dev->dev);
+	if (!handle)
+		return -ENODEV;
+
+	info = smi_info_alloc();
+	if (!info)
+		return -ENOMEM;
+
+	info->addr_source = SI_ACPI;
+	dev_info(&dev->dev, PFX "probing via ACPI\n");
+
+	info->addr_info.acpi_info.acpi_handle = handle;
+
+	/* _IFT tells us the interface type: KCS, BT, etc */
+	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
+		goto err_free;
+	}
+
+	switch (tmp) {
+	case 1:
+		info->si_type = SI_KCS;
+		break;
+	case 2:
+		info->si_type = SI_SMIC;
+		break;
+	case 3:
+		info->si_type = SI_BT;
+		break;
+	case 4: /* SSIF, just ignore */
+		rv = -ENODEV;
+		goto err_free;
+	default:
+		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
+		goto err_free;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_IO, 0);
+	if (res) {
+		info->io_setup = port_setup;
+		info->io.addr_type = IPMI_IO_ADDR_SPACE;
+	} else {
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		if (res) {
+			info->io_setup = mem_setup;
+			info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+		}
+	}
+	if (!res) {
+		dev_err(&dev->dev, "no I/O or memory address\n");
+		goto err_free;
+	}
+	info->io.addr_data = res->start;
+
+	info->io.regspacing = DEFAULT_REGSPACING;
+	res_second = platform_get_resource(dev,
+			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+					IORESOURCE_IO : IORESOURCE_MEM,
+			       1);
+	if (res_second) {
+		if (res_second->start > info->io.addr_data)
+			info->io.regspacing =
+				res_second->start - info->io.addr_data;
+	}
+	info->io.regsize = DEFAULT_REGSPACING;
+	info->io.regshift = 0;
+
+	/* If _GPE exists, use it; otherwise use standard interrupts */
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+	if (ACPI_SUCCESS(status)) {
+		info->irq = tmp;
+		info->irq_setup = acpi_gpe_irq_setup;
+	} else {
+		int irq = platform_get_irq(dev, 0);
+
+		if (irq > 0) {
+			info->irq = irq;
+			info->irq_setup = std_irq_setup;
+		}
+	}
+
+	info->dev = &dev->dev;
+	platform_set_drvdata(dev, info);
+
+	dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+		 res, info->io.regsize, info->io.regspacing,
+		 info->irq);
+
+	rv = add_smi(info);
+	if (rv)
+		kfree(info);
+
+	return rv;
+
+err_free:
+	kfree(info);
+	return rv;
+}
+
+static const struct acpi_device_id acpi_ipmi_match[] = {
+	{ "IPI0001", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, acpi_ipmi_match);
+#else
+static int acpi_ipmi_probe(struct platform_device *dev)
+{
+	return -ENODEV;
+}
 #endif
-	return 0;
+
+static int ipmi_probe(struct platform_device *dev)
+{
+	if (of_ipmi_probe(dev) == 0)
+		return 0;
+
+	return acpi_ipmi_probe(dev);
 }
 
-static const struct of_device_id ipmi_match[] =
+static int ipmi_remove(struct platform_device *dev)
 {
-	{ .type = "ipmi", .compatible = "ipmi-kcs",
-	  .data = (void *)(unsigned long) SI_KCS },
-	{ .type = "ipmi", .compatible = "ipmi-smic",
-	  .data = (void *)(unsigned long) SI_SMIC },
-	{ .type = "ipmi", .compatible = "ipmi-bt",
-	  .data = (void *)(unsigned long) SI_BT },
-	{},
-};
+	struct smi_info *info = dev_get_drvdata(&dev->dev);
+
+	cleanup_one_si(info);
+	return 0;
+}
 
 static struct platform_driver ipmi_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
-		.of_match_table = ipmi_match,
+		.of_match_table = of_ipmi_match,
+		.acpi_match_table = ACPI_PTR(acpi_ipmi_match),
 	},
 	.probe		= ipmi_probe,
 	.remove		= ipmi_remove,
@@ -2905,12 +2922,7 @@ static int try_get_dev_id(struct smi_info *smi_info)
 	return rv;
 }
 
-/*
- * Some BMCs do not support clearing the receive irq bit in the global
- * enables (even if they don't support interrupts on the BMC).  Check
- * for this and handle it properly.
- */
-static void check_clr_rcv_irq(struct smi_info *smi_info)
+static int get_global_enables(struct smi_info *smi_info, u8 *enables)
 {
 	unsigned char         msg[3];
 	unsigned char         *resp;
@@ -2918,12 +2930,8 @@ static void check_clr_rcv_irq(struct smi_info *smi_info)
 	int                   rv;
 
 	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
-	if (!resp) {
-		printk(KERN_WARNING PFX "Out of memory allocating response for"
-		       " global enables command, cannot check recv irq bit"
-		       " handling.\n");
-		return;
-	}
+	if (!resp)
+		return -ENOMEM;
 
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
@@ -2931,9 +2939,9 @@ static void check_clr_rcv_irq(struct smi_info *smi_info)
 
 	rv = wait_for_msg_done(smi_info);
 	if (rv) {
-		printk(KERN_WARNING PFX "Error getting response from get"
-		       " global enables command, cannot check recv irq bit"
-		       " handling.\n");
+		dev_warn(smi_info->dev,
+			 "Error getting response from get global enables command: %d\n",
+			 rv);
 		goto out;
 	}
 
@@ -2944,27 +2952,44 @@ static void check_clr_rcv_irq(struct smi_info *smi_info)
 			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
 			resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD   ||
 			resp[2] != 0) {
-		printk(KERN_WARNING PFX "Invalid return from get global"
-		       " enables command, cannot check recv irq bit"
-		       " handling.\n");
+		dev_warn(smi_info->dev,
+			 "Invalid return from get global enables command: %ld %x %x %x\n",
+			 resp_len, resp[0], resp[1], resp[2]);
 		rv = -EINVAL;
 		goto out;
+	} else {
+		*enables = resp[3];
 	}
 
-	if ((resp[3] & IPMI_BMC_RCV_MSG_INTR) == 0)
-		/* Already clear, should work ok. */
-		goto out;
+out:
+	kfree(resp);
+	return rv;
+}
+
+/*
+ * Returns 1 if it gets an error from the command.
+ */
+static int set_global_enables(struct smi_info *smi_info, u8 enables)
+{
+	unsigned char         msg[3];
+	unsigned char         *resp;
+	unsigned long         resp_len;
+	int                   rv;
+
+	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
 
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
-	msg[2] = resp[3] & ~IPMI_BMC_RCV_MSG_INTR;
+	msg[2] = enables;
 	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
 
 	rv = wait_for_msg_done(smi_info);
 	if (rv) {
-		printk(KERN_WARNING PFX "Error getting response from set"
-		       " global enables command, cannot check recv irq bit"
-		       " handling.\n");
+		dev_warn(smi_info->dev,
+			 "Error getting response from set global enables command: %d\n",
+			 rv);
 		goto out;
 	}
 
@@ -2974,25 +2999,93 @@ static void check_clr_rcv_irq(struct smi_info *smi_info)
 	if (resp_len < 3 ||
 			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
 			resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
-		printk(KERN_WARNING PFX "Invalid return from get global"
-		       " enables command, cannot check recv irq bit"
-		       " handling.\n");
+		dev_warn(smi_info->dev,
+			 "Invalid return from set global enables command: %ld %x %x\n",
+			 resp_len, resp[0], resp[1]);
 		rv = -EINVAL;
 		goto out;
 	}
 
-	if (resp[2] != 0) {
+	if (resp[2] != 0)
+		rv = 1;
+
+out:
+	kfree(resp);
+	return rv;
+}
+
+/*
+ * Some BMCs do not support clearing the receive irq bit in the global
+ * enables (even if they don't support interrupts on the BMC).  Check
+ * for this and handle it properly.
+ */
+static void check_clr_rcv_irq(struct smi_info *smi_info)
+{
+	u8 enables = 0;
+	int rv;
+
+	rv = get_global_enables(smi_info, &enables);
+	if (!rv) {
+		if ((enables & IPMI_BMC_RCV_MSG_INTR) == 0)
+			/* Already clear, should work ok. */
+			return;
+
+		enables &= ~IPMI_BMC_RCV_MSG_INTR;
+		rv = set_global_enables(smi_info, enables);
+	}
+
+	if (rv < 0) {
+		dev_err(smi_info->dev,
+			"Cannot check clearing the rcv irq: %d\n", rv);
+		return;
+	}
+
+	if (rv) {
 		/*
 		 * An error when setting the event buffer bit means
 		 * clearing the bit is not supported.
 		 */
-		printk(KERN_WARNING PFX "The BMC does not support clearing"
-		       " the recv irq bit, compensating, but the BMC needs to"
-		       " be fixed.\n");
-		smi_info->cannot_clear_recv_irq_bit = true;
+		dev_warn(smi_info->dev,
+			 "The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.\n");
+		smi_info->cannot_disable_irq = true;
+	}
+}
+
+/*
+ * Some BMCs do not support setting the interrupt bits in the global
+ * enables even if they support interrupts.  Clearly bad, but we can
+ * compensate.
+ */
+static void check_set_rcv_irq(struct smi_info *smi_info)
+{
+	u8 enables = 0;
+	int rv;
+
+	if (!smi_info->irq)
+		return;
+
+	rv = get_global_enables(smi_info, &enables);
+	if (!rv) {
+		enables |= IPMI_BMC_RCV_MSG_INTR;
+		rv = set_global_enables(smi_info, enables);
+	}
+
+	if (rv < 0) {
+		dev_err(smi_info->dev,
+			"Cannot check setting the rcv irq: %d\n", rv);
+		return;
+	}
+
+	if (rv) {
+		/*
+		 * An error when setting the event buffer bit means
+		 * setting the bit is not supported.
+		 */
+		dev_warn(smi_info->dev,
+			 "The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed.\n");
+		smi_info->cannot_disable_irq = true;
+		smi_info->irq_enable_broken = true;
 	}
- out:
-	kfree(resp);
 }
 
 static int try_enable_event_buffer(struct smi_info *smi_info)
@@ -3313,6 +3406,12 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
 	setup_dell_poweredge_bt_xaction_handler(smi_info);
 }
 
+static void check_for_broken_irqs(struct smi_info *smi_info)
+{
+	check_clr_rcv_irq(smi_info);
+	check_set_rcv_irq(smi_info);
+}
+
 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 {
 	if (smi_info->thread != NULL)
@@ -3321,7 +3420,7 @@ static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 		del_timer_sync(&smi_info->si_timer);
 }
 
-static struct ipmi_default_vals
+static const struct ipmi_default_vals
 {
 	int type;
 	int port;
@@ -3490,10 +3589,9 @@ static int try_smi_init(struct smi_info *new_smi)
 		goto out_err;
 	}
 
-	check_clr_rcv_irq(new_smi);
-
 	setup_oem_data_handler(new_smi);
 	setup_xaction_handlers(new_smi);
+	check_for_broken_irqs(new_smi);
 
 	new_smi->waiting_msg = NULL;
 	new_smi->curr_msg = NULL;
@@ -3692,13 +3790,6 @@ static int init_ipmi_si(void)
 	}
 #endif
 
-#ifdef CONFIG_ACPI
-	if (si_tryacpi) {
-		pnp_register_driver(&ipmi_pnp_driver);
-		pnp_registered = true;
-	}
-#endif
-
 #ifdef CONFIG_DMI
 	if (si_trydmi)
 		dmi_find_bmc();
@@ -3850,10 +3941,6 @@ static void cleanup_ipmi_si(void)
 	if (pci_registered)
 		pci_unregister_driver(&ipmi_pci_driver);
 #endif
-#ifdef CONFIG_ACPI
-	if (pnp_registered)
-		pnp_unregister_driver(&ipmi_pnp_driver);
-#endif
 #ifdef CONFIG_PARISC
 	if (parisc_registered)
 		unregister_parisc_driver(&ipmi_parisc_driver);

drivers/char/ipmi/ipmi_si_sm.h

@@ -46,8 +46,8 @@ struct si_sm_data;
  * this interface.
  */
 struct si_sm_io {
-	unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset);
-	void (*outputb)(struct si_sm_io *io,
+	unsigned char (*inputb)(const struct si_sm_io *io, unsigned int offset);
+	void (*outputb)(const struct si_sm_io *io,
 			unsigned int  offset,
 			unsigned char b);
 
@@ -135,7 +135,7 @@ struct si_sm_handlers {
 };
 
 /* Current state machines that we can use. */
-extern struct si_sm_handlers kcs_smi_handlers;
-extern struct si_sm_handlers smic_smi_handlers;
-extern struct si_sm_handlers bt_smi_handlers;
+extern const struct si_sm_handlers kcs_smi_handlers;
+extern const struct si_sm_handlers smic_smi_handlers;
+extern const struct si_sm_handlers bt_smi_handlers;
 

drivers/char/ipmi/ipmi_smic_sm.c

@@ -589,7 +589,7 @@ static int smic_size(void)
 	return sizeof(struct si_sm_data);
 }
 
-struct si_sm_handlers smic_smi_handlers = {
+const struct si_sm_handlers smic_smi_handlers = {
 	.init_data         = init_smic_data,
 	.start_transaction = start_smic_transaction,
 	.get_result        = smic_get_result,

drivers/char/ipmi/ipmi_ssif.c

@@ -1136,6 +1136,10 @@ module_param_array(slave_addrs, int, &num_slave_addrs, 0);
 MODULE_PARM_DESC(slave_addrs,
 		 "The default IPMB slave address for the controller.");
 
+static bool alerts_broken;
+module_param(alerts_broken, bool, 0);
+MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller.");
+
 /*
  * Bit 0 enables message debugging, bit 1 enables state debugging, and
  * bit 2 enables timing debugging.  This is an array indexed by
@@ -1154,11 +1158,11 @@ static int use_thread;
 module_param(use_thread, int, 0);
 MODULE_PARM_DESC(use_thread, "Use the thread interface.");
 
-static bool ssif_tryacpi = 1;
+static bool ssif_tryacpi = true;
 module_param_named(tryacpi, ssif_tryacpi, bool, 0);
 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI");
 
-static bool ssif_trydmi = 1;
+static bool ssif_trydmi = true;
 module_param_named(trydmi, ssif_trydmi, bool, 0);
 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)");
 
@@ -1582,6 +1586,10 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
 	}
 
+	/* Some systems don't behave well if you enable alerts. */
+	if (alerts_broken)
+		goto found;
+
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
@@ -1787,7 +1795,7 @@ static unsigned short *ssif_address_list(void)
 }
 
 #ifdef CONFIG_ACPI
-static struct acpi_device_id ssif_acpi_match[] = {
+static const struct acpi_device_id ssif_acpi_match[] = {
 	{ "IPI0001", 0 },
 	{ },
 };

include/linux/ipmi_smi.h

@@ -115,6 +115,11 @@ struct ipmi_smi_handlers {
 	   implement it. */
 	void (*set_need_watch)(void *send_info, bool enable);
 
+	/*
+	 * Called when flushing all pending messages.
+	 */
+	void (*flush_messages)(void *send_info);
+
 	/* Called when the interface should go into "run to
 	   completion" mode.  If this call sets the value to true, the
 	   interface should make sure that all messages are flushed
@@ -207,7 +212,7 @@ static inline int ipmi_demangle_device_id(const unsigned char *data,
    upper layer until the start_processing() function in the handlers
    is called, and the lower layer must get the interface from that
    call. */
-int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
+int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
 		      void                     *send_info,
 		      struct ipmi_device_id    *device_id,
 		      struct device            *dev,