tty/serial/pmac_zilog: Fix suspend & resume

This patch reworks & simplifies pmac_zilog handling of suspend/resume,
essentially removing all the specific code in there and using the
generic uart helpers.

This required properly registering the tty as a child of the macio (or platform)
device, so I had to delay the registration a bit (we used to register the ports
very very early). We still register the kernel console early though.

I removed a couple of unused or useless flags as well, relying on the
core to not call us when asleep. I also removed the essentially useless
interrupt mutex, simplifying the locking a bit.

I removed some code for handling unexpected interrupt which should never
be hit and could potentially be harmful (causing us to access a register
on a powered off SCC). We diable port interrupts on close always so there
should be no need to drain data on a closed port.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

drivers/tty/serial/pmac_zilog.h

 #ifndef __PMAC_ZILOG_H__
 #define __PMAC_ZILOG_H__
 
-#ifdef CONFIG_PPC_PMAC
-#define pmz_debug(fmt, arg...)	dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_error(fmt, arg...)	dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_info(fmt, arg...)	dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
-#else
-#define pmz_debug(fmt, arg...)	dev_dbg(&uap->node->dev, fmt, ## arg)
-#define pmz_error(fmt, arg...)	dev_err(&uap->node->dev, fmt, ## arg)
-#define pmz_info(fmt, arg...)	dev_info(&uap->node->dev, fmt, ## arg)
-#endif
-
 /*
  * At most 2 ESCCs with 2 ports each
  */
@@ -35,7 +25,7 @@ struct uart_pmac_port {
 	 */
 	struct device_node		*node;
 #else
-	struct platform_device		*node;
+	struct platform_device		*pdev;
 #endif
 
 	/* Port type as obtained from device tree (IRDA, modem, ...) */
@@ -50,14 +40,11 @@ struct uart_pmac_port {
 #define PMACZILOG_FLAG_REGS_HELD	0x00000010
 #define PMACZILOG_FLAG_TX_STOPPED	0x00000020
 #define PMACZILOG_FLAG_TX_ACTIVE	0x00000040
-#define PMACZILOG_FLAG_ENABLED          0x00000080
 #define PMACZILOG_FLAG_IS_IRDA		0x00000100
 #define PMACZILOG_FLAG_IS_INTMODEM	0x00000200
 #define PMACZILOG_FLAG_HAS_DMA		0x00000400
 #define PMACZILOG_FLAG_RSRC_REQUESTED	0x00000800
-#define PMACZILOG_FLAG_IS_ASLEEP	0x00001000
 #define PMACZILOG_FLAG_IS_OPEN		0x00002000
-#define PMACZILOG_FLAG_IS_IRQ_ON	0x00004000
 #define PMACZILOG_FLAG_IS_EXTCLK	0x00008000
 #define PMACZILOG_FLAG_BREAK		0x00010000
 
@@ -74,6 +61,8 @@ struct uart_pmac_port {
 	volatile struct dbdma_regs	__iomem *rx_dma_regs;
 #endif
 
+	unsigned char			irq_name[8];
+
 	struct ktermios			termios_cache;
 };
 
@@ -388,9 +377,7 @@ static inline void zssync(struct uart_pmac_port *port)
 #define ZS_IS_IRDA(UP)			((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
 #define ZS_IS_INTMODEM(UP)		((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
 #define ZS_HAS_DMA(UP)			((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP)		((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
 #define ZS_IS_OPEN(UP)			((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP)		((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
 #define ZS_IS_EXTCLK(UP)		((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
 
 #endif /* __PMAC_ZILOG_H__ */