Commit a7c602bf authored by Stephen Boyd's avatar Stephen Boyd

Merge tag 'tegra-for-4.3-clk' of...

Merge tag 'tegra-for-4.3-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

clk: tegra: Changes for v4.3-rc1

This contains the DFLL driver needed to implement CPU frequency scaling
on Tegra.
parents 1c4b4b0e 79cf95c7
NVIDIA Tegra124 DFLL FCPU clocksource
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The DFLL IP block on Tegra is a root clocksource designed for clocking
the fast CPU cluster. It consists of a free-running voltage controlled
oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
control module that will automatically adjust the VDD_CPU voltage by
communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
Currently only the I2C mode is supported by these bindings.
Required properties:
- compatible : should be "nvidia,tegra124-dfll"
- reg : Defines the following set of registers, in the order listed:
- registers for the DFLL control logic.
- registers for the I2C output logic.
- registers for the integrated I2C master controller.
- look-up table RAM for voltage register values.
- interrupts: Should contain the DFLL block interrupt.
- clocks: Must contain an entry for each entry in clock-names.
See clock-bindings.txt for details.
- clock-names: Must include the following entries:
- soc: Clock source for the DFLL control logic.
- ref: The closed loop reference clock
- i2c: Clock source for the integrated I2C master.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dvco: Reset control for the DFLL DVCO.
- #clock-cells: Must be 0.
- clock-output-names: Name of the clock output.
- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
hardware will start controlling. The regulator will be queried for
the I2C register, control values and supported voltages.
Required properties for the control loop parameters:
- nvidia,sample-rate: Sample rate of the DFLL control loop.
- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
Optional properties for the control loop parameters:
- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
Required properties for I2C mode:
- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
Example:
clock@0,70110000 {
compatible = "nvidia,tegra124-dfll";
reg = <0 0x70110000 0 0x100>, /* DFLL control */
<0 0x70110000 0 0x100>, /* I2C output control */
<0 0x70110100 0 0x100>, /* Integrated I2C controller */
<0 0x70110200 0 0x100>; /* Look-up table RAM */
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
<&tegra_car TEGRA124_CLK_DFLL_REF>,
<&tegra_car TEGRA124_CLK_I2C5>;
clock-names = "soc", "ref", "i2c";
resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
reset-names = "dvco";
#clock-cells = <0>;
clock-output-names = "dfllCPU_out";
vdd-cpu-supply = <&vdd_cpu>;
status = "okay";
nvidia,sample-rate = <12500>;
nvidia,droop-ctrl = <0x00000f00>;
nvidia,force-mode = <1>;
nvidia,cf = <10>;
nvidia,ci = <0>;
nvidia,cg = <2>;
nvidia,i2c-fs-rate = <400000>;
};
...@@ -8,6 +8,7 @@ menuconfig ARCH_TEGRA ...@@ -8,6 +8,7 @@ menuconfig ARCH_TEGRA
select HAVE_ARM_SCU if SMP select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP select HAVE_ARM_TWD if SMP
select PINCTRL select PINCTRL
select PM_OPP
select ARCH_HAS_RESET_CONTROLLER select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER select RESET_CONTROLLER
select SOC_BUS select SOC_BUS
......
obj-y += clk.o obj-y += clk.o
obj-y += clk-audio-sync.o obj-y += clk-audio-sync.o
obj-y += clk-dfll.o
obj-y += clk-divider.o obj-y += clk-divider.o
obj-y += clk-periph.o obj-y += clk-periph.o
obj-y += clk-periph-gate.o obj-y += clk-periph-gate.o
...@@ -16,4 +17,6 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o ...@@ -16,4 +17,6 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124-dfll-fcpu.o
obj-$(CONFIG_ARCH_TEGRA_132_SOC) += clk-tegra124.o obj-$(CONFIG_ARCH_TEGRA_132_SOC) += clk-tegra124.o
obj-y += cvb.o
This diff is collapsed.
/*
* clk-dfll.h - prototypes and macros for the Tegra DFLL clocksource driver
* Copyright (C) 2013 NVIDIA Corporation. All rights reserved.
*
* Aleksandr Frid <afrid@nvidia.com>
* Paul Walmsley <pwalmsley@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef __DRIVERS_CLK_TEGRA_CLK_DFLL_H
#define __DRIVERS_CLK_TEGRA_CLK_DFLL_H
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/types.h>
/**
* struct tegra_dfll_soc_data - SoC-specific hooks/integration for the DFLL driver
* @opp_dev: struct device * that holds the OPP table for the DFLL
* @min_millivolts: minimum voltage (in mV) that the DFLL can operate
* @tune0_low: DFLL tuning register 0 (low voltage range)
* @tune0_high: DFLL tuning register 0 (high voltage range)
* @tune1: DFLL tuning register 1
* @assert_dvco_reset: fn ptr to place the DVCO in reset
* @deassert_dvco_reset: fn ptr to release the DVCO reset
* @set_clock_trimmers_high: fn ptr to tune clock trimmers for high voltage
* @set_clock_trimmers_low: fn ptr to tune clock trimmers for low voltage
*/
struct tegra_dfll_soc_data {
struct device *dev;
unsigned int min_millivolts;
u32 tune0_low;
u32 tune0_high;
u32 tune1;
void (*init_clock_trimmers)(void);
void (*set_clock_trimmers_high)(void);
void (*set_clock_trimmers_low)(void);
};
int tegra_dfll_register(struct platform_device *pdev,
struct tegra_dfll_soc_data *soc);
int tegra_dfll_unregister(struct platform_device *pdev);
int tegra_dfll_runtime_suspend(struct device *dev);
int tegra_dfll_runtime_resume(struct device *dev);
#endif /* __DRIVERS_CLK_TEGRA_CLK_DFLL_H */
...@@ -43,7 +43,9 @@ static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", ...@@ -43,7 +43,9 @@ static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
"pll_p", "pll_p_out4", "unused", "pll_p", "pll_p_out4", "unused",
"unused", "pll_x" }; "unused", "pll_x", "unused", "unused",
"unused", "unused", "unused", "unused",
"dfllCPU_out" };
static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
"pll_p", "pll_p_out4", "unused", "pll_p", "pll_p_out4", "unused",
......
/*
* Tegra124 DFLL FCPU clock source driver
*
* Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved.
*
* Aleksandr Frid <afrid@nvidia.com>
* Paul Walmsley <pwalmsley@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <soc/tegra/fuse.h>
#include "clk.h"
#include "clk-dfll.h"
#include "cvb.h"
/* Maximum CPU frequency, indexed by CPU speedo id */
static const unsigned long cpu_max_freq_table[] = {
[0] = 2014500000UL,
[1] = 2320500000UL,
[2] = 2116500000UL,
[3] = 2524500000UL,
};
static const struct cvb_table tegra124_cpu_cvb_tables[] = {
{
.speedo_id = -1,
.process_id = -1,
.min_millivolts = 900,
.max_millivolts = 1260,
.alignment = {
.step_uv = 10000, /* 10mV */
},
.speedo_scale = 100,
.voltage_scale = 1000,
.cvb_table = {
{204000000UL, {1112619, -29295, 402} },
{306000000UL, {1150460, -30585, 402} },
{408000000UL, {1190122, -31865, 402} },
{510000000UL, {1231606, -33155, 402} },
{612000000UL, {1274912, -34435, 402} },
{714000000UL, {1320040, -35725, 402} },
{816000000UL, {1366990, -37005, 402} },
{918000000UL, {1415762, -38295, 402} },
{1020000000UL, {1466355, -39575, 402} },
{1122000000UL, {1518771, -40865, 402} },
{1224000000UL, {1573009, -42145, 402} },
{1326000000UL, {1629068, -43435, 402} },
{1428000000UL, {1686950, -44715, 402} },
{1530000000UL, {1746653, -46005, 402} },
{1632000000UL, {1808179, -47285, 402} },
{1734000000UL, {1871526, -48575, 402} },
{1836000000UL, {1936696, -49855, 402} },
{1938000000UL, {2003687, -51145, 402} },
{2014500000UL, {2054787, -52095, 402} },
{2116500000UL, {2124957, -53385, 402} },
{2218500000UL, {2196950, -54665, 402} },
{2320500000UL, {2270765, -55955, 402} },
{2422500000UL, {2346401, -57235, 402} },
{2524500000UL, {2437299, -58535, 402} },
{0, { 0, 0, 0} },
},
.cpu_dfll_data = {
.tune0_low = 0x005020ff,
.tune0_high = 0x005040ff,
.tune1 = 0x00000060,
}
},
};
static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
{
int process_id, speedo_id, speedo_value;
struct tegra_dfll_soc_data *soc;
const struct cvb_table *cvb;
process_id = tegra_sku_info.cpu_process_id;
speedo_id = tegra_sku_info.cpu_speedo_id;
speedo_value = tegra_sku_info.cpu_speedo_value;
if (speedo_id >= ARRAY_SIZE(cpu_max_freq_table)) {
dev_err(&pdev->dev, "unknown max CPU freq for speedo_id=%d\n",
speedo_id);
return -ENODEV;
}
soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
if (!soc)
return -ENOMEM;
soc->dev = get_cpu_device(0);
if (!soc->dev) {
dev_err(&pdev->dev, "no CPU0 device\n");
return -ENODEV;
}
cvb = tegra_cvb_build_opp_table(tegra124_cpu_cvb_tables,
ARRAY_SIZE(tegra124_cpu_cvb_tables),
process_id, speedo_id, speedo_value,
cpu_max_freq_table[speedo_id],
soc->dev);
if (IS_ERR(cvb)) {
dev_err(&pdev->dev, "couldn't build OPP table: %ld\n",
PTR_ERR(cvb));
return PTR_ERR(cvb);
}
soc->min_millivolts = cvb->min_millivolts;
soc->tune0_low = cvb->cpu_dfll_data.tune0_low;
soc->tune0_high = cvb->cpu_dfll_data.tune0_high;
soc->tune1 = cvb->cpu_dfll_data.tune1;
return tegra_dfll_register(pdev, soc);
}
static const struct of_device_id tegra124_dfll_fcpu_of_match[] = {
{ .compatible = "nvidia,tegra124-dfll", },
{ },
};
MODULE_DEVICE_TABLE(of, tegra124_dfll_fcpu_of_match);
static const struct dev_pm_ops tegra124_dfll_pm_ops = {
SET_RUNTIME_PM_OPS(tegra_dfll_runtime_suspend,
tegra_dfll_runtime_resume, NULL)
};
static struct platform_driver tegra124_dfll_fcpu_driver = {
.probe = tegra124_dfll_fcpu_probe,
.remove = tegra_dfll_unregister,
.driver = {
.name = "tegra124-dfll",
.of_match_table = tegra124_dfll_fcpu_of_match,
.pm = &tegra124_dfll_pm_ops,
},
};
static int __init tegra124_dfll_fcpu_init(void)
{
return platform_driver_register(&tegra124_dfll_fcpu_driver);
}
module_init(tegra124_dfll_fcpu_init);
static void __exit tegra124_dfll_fcpu_exit(void)
{
platform_driver_unregister(&tegra124_dfll_fcpu_driver);
}
module_exit(tegra124_dfll_fcpu_exit);
MODULE_DESCRIPTION("Tegra124 DFLL clock source driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Aleksandr Frid <afrid@nvidia.com>");
MODULE_AUTHOR("Paul Walmsley <pwalmsley@nvidia.com>");
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/export.h> #include <linux/export.h>
#include <linux/clk/tegra.h> #include <linux/clk/tegra.h>
#include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/reset/tegra124-car.h>
#include "clk.h" #include "clk.h"
#include "clk-id.h" #include "clk-id.h"
...@@ -38,6 +39,9 @@ ...@@ -38,6 +39,9 @@
#define CLK_SOURCE_CSITE 0x1d4 #define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c #define CLK_SOURCE_EMC 0x19c
#define RST_DFLL_DVCO 0x2f4
#define DVFS_DFLL_RESET_SHIFT 0
#define PLLC_BASE 0x80 #define PLLC_BASE 0x80
#define PLLC_OUT 0x84 #define PLLC_OUT 0x84
#define PLLC_MISC2 0x88 #define PLLC_MISC2 0x88
...@@ -93,6 +97,8 @@ ...@@ -93,6 +97,8 @@
#define PMC_PLLM_WB0_OVERRIDE 0x1dc #define PMC_PLLM_WB0_OVERRIDE 0x1dc
#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 #define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
#define CCLKG_BURST_POLICY 0x368
#define UTMIP_PLL_CFG2 0x488 #define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) #define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) #define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
...@@ -125,6 +131,8 @@ ...@@ -125,6 +131,8 @@
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM_SLEEP
static struct cpu_clk_suspend_context { static struct cpu_clk_suspend_context {
u32 clk_csite_src; u32 clk_csite_src;
u32 cclkg_burst;
u32 cclkg_divider;
} tegra124_cpu_clk_sctx; } tegra124_cpu_clk_sctx;
#endif #endif
...@@ -1318,12 +1326,22 @@ static void tegra124_cpu_clock_suspend(void) ...@@ -1318,12 +1326,22 @@ static void tegra124_cpu_clock_suspend(void)
tegra124_cpu_clk_sctx.clk_csite_src = tegra124_cpu_clk_sctx.clk_csite_src =
readl(clk_base + CLK_SOURCE_CSITE); readl(clk_base + CLK_SOURCE_CSITE);
writel(3 << 30, clk_base + CLK_SOURCE_CSITE); writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
tegra124_cpu_clk_sctx.cclkg_burst =
readl(clk_base + CCLKG_BURST_POLICY);
tegra124_cpu_clk_sctx.cclkg_divider =
readl(clk_base + CCLKG_BURST_POLICY + 4);
} }
static void tegra124_cpu_clock_resume(void) static void tegra124_cpu_clock_resume(void)
{ {
writel(tegra124_cpu_clk_sctx.clk_csite_src, writel(tegra124_cpu_clk_sctx.clk_csite_src,
clk_base + CLK_SOURCE_CSITE); clk_base + CLK_SOURCE_CSITE);
writel(tegra124_cpu_clk_sctx.cclkg_burst,
clk_base + CCLKG_BURST_POLICY);
writel(tegra124_cpu_clk_sctx.cclkg_divider,
clk_base + CCLKG_BURST_POLICY + 4);
} }
#endif #endif
...@@ -1413,6 +1431,68 @@ static void __init tegra124_clock_apply_init_table(void) ...@@ -1413,6 +1431,68 @@ static void __init tegra124_clock_apply_init_table(void)
tegra_init_from_table(tegra124_init_table, clks, TEGRA124_CLK_CLK_MAX); tegra_init_from_table(tegra124_init_table, clks, TEGRA124_CLK_CLK_MAX);
} }
/**
* tegra124_car_barrier - wait for pending writes to the CAR to complete
*
* Wait for any outstanding writes to the CAR MMIO space from this CPU
* to complete before continuing execution. No return value.
*/
static void tegra124_car_barrier(void)
{
readl_relaxed(clk_base + RST_DFLL_DVCO);
}
/**
* tegra124_clock_assert_dfll_dvco_reset - assert the DFLL's DVCO reset
*
* Assert the reset line of the DFLL's DVCO. No return value.
*/
void tegra124_clock_assert_dfll_dvco_reset(void)
{
u32 v;
v = readl_relaxed(clk_base + RST_DFLL_DVCO);
v |= (1 << DVFS_DFLL_RESET_SHIFT);
writel_relaxed(v, clk_base + RST_DFLL_DVCO);
tegra124_car_barrier();
}
/**
* tegra124_clock_deassert_dfll_dvco_reset - deassert the DFLL's DVCO reset
*
* Deassert the reset line of the DFLL's DVCO, allowing the DVCO to
* operate. No return value.
*/
void tegra124_clock_deassert_dfll_dvco_reset(void)
{
u32 v;
v = readl_relaxed(clk_base + RST_DFLL_DVCO);
v &= ~(1 << DVFS_DFLL_RESET_SHIFT);
writel_relaxed(v, clk_base + RST_DFLL_DVCO);
tegra124_car_barrier();
}
int tegra124_reset_assert(unsigned long id)
{
if (id == TEGRA124_RST_DFLL_DVCO)
tegra124_clock_assert_dfll_dvco_reset();
else
return -EINVAL;
return 0;
}
int tegra124_reset_deassert(unsigned long id)
{
if (id == TEGRA124_RST_DFLL_DVCO)
tegra124_clock_deassert_dfll_dvco_reset();
else
return -EINVAL;
return 0;
}
/** /**
* tegra132_clock_apply_init_table - initialize clocks on Tegra132 SoCs * tegra132_clock_apply_init_table - initialize clocks on Tegra132 SoCs
* *
...@@ -1498,6 +1578,8 @@ static void __init tegra124_132_clock_init_post(struct device_node *np) ...@@ -1498,6 +1578,8 @@ static void __init tegra124_132_clock_init_post(struct device_node *np)
{ {
tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks, tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks,
&pll_x_params); &pll_x_params);
tegra_init_special_resets(1, tegra124_reset_assert,
tegra124_reset_deassert);
tegra_add_of_provider(np); tegra_add_of_provider(np);
clks[TEGRA124_CLK_EMC] = tegra_clk_register_emc(clk_base, np, clks[TEGRA124_CLK_EMC] = tegra_clk_register_emc(clk_base, np,
......
...@@ -50,7 +50,6 @@ ...@@ -50,7 +50,6 @@
#define RST_DEVICES_L 0x004 #define RST_DEVICES_L 0x004
#define RST_DEVICES_H 0x008 #define RST_DEVICES_H 0x008
#define RST_DEVICES_U 0x00C #define RST_DEVICES_U 0x00C
#define RST_DFLL_DVCO 0x2F4
#define RST_DEVICES_V 0x358 #define RST_DEVICES_V 0x358
#define RST_DEVICES_W 0x35C #define RST_DEVICES_W 0x35C
#define RST_DEVICES_X 0x28C #define RST_DEVICES_X 0x28C
...@@ -80,6 +79,11 @@ static struct clk **clks; ...@@ -80,6 +79,11 @@ static struct clk **clks;
static int clk_num; static int clk_num;
static struct clk_onecell_data clk_data; static struct clk_onecell_data clk_data;
/* Handlers for SoC-specific reset lines */
static int (*special_reset_assert)(unsigned long);
static int (*special_reset_deassert)(unsigned long);
static unsigned int num_special_reset;
static struct tegra_clk_periph_regs periph_regs[] = { static struct tegra_clk_periph_regs periph_regs[] = {
[0] = { [0] = {
.enb_reg = CLK_OUT_ENB_L, .enb_reg = CLK_OUT_ENB_L,
...@@ -153,19 +157,29 @@ static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev, ...@@ -153,19 +157,29 @@ static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev,
*/ */
tegra_read_chipid(); tegra_read_chipid();
if (id < periph_banks * 32) {
writel_relaxed(BIT(id % 32), writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_set_reg); clk_base + periph_regs[id / 32].rst_set_reg);
return 0; return 0;
} else if (id < periph_banks * 32 + num_special_reset) {
return special_reset_assert(id);
}
return -EINVAL;
} }
static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev, static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev,
unsigned long id) unsigned long id)
{ {
if (id < periph_banks * 32) {
writel_relaxed(BIT(id % 32), writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_clr_reg); clk_base + periph_regs[id / 32].rst_clr_reg);
return 0; return 0;
} else if (id < periph_banks * 32 + num_special_reset) {
return special_reset_deassert(id);
}
return -EINVAL;
} }
struct tegra_clk_periph_regs *get_reg_bank(int clkid) struct tegra_clk_periph_regs *get_reg_bank(int clkid)
...@@ -287,10 +301,19 @@ void __init tegra_add_of_provider(struct device_node *np) ...@@ -287,10 +301,19 @@ void __init tegra_add_of_provider(struct device_node *np)
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
rst_ctlr.of_node = np; rst_ctlr.of_node = np;
rst_ctlr.nr_resets = periph_banks * 32; rst_ctlr.nr_resets = periph_banks * 32 + num_special_reset;
reset_controller_register(&rst_ctlr); reset_controller_register(&rst_ctlr);
} }
void __init tegra_init_special_resets(unsigned int num,
int (*assert)(unsigned long),
int (*deassert)(unsigned long))
{
num_special_reset = num;
special_reset_assert = assert;
special_reset_deassert = deassert;
}
void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num) void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
{ {
int i; int i;
......
...@@ -591,6 +591,9 @@ struct tegra_devclk { ...@@ -591,6 +591,9 @@ struct tegra_devclk {
char *con_id; char *con_id;
}; };
void tegra_init_special_resets(unsigned int num, int (*assert)(unsigned long),
int (*deassert)(unsigned long));
void tegra_init_from_table(struct tegra_clk_init_table *tbl, void tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max); struct clk *clks[], int clk_max);
......
/*
* Utility functions for parsing Tegra CVB voltage tables
*
* Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/pm_opp.h>
#include "cvb.h"
/* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) */
static inline int get_cvb_voltage(int speedo, int s_scale,
const struct cvb_coefficients *cvb)
{
int mv;
/* apply only speedo scale: output mv = cvb_mv * v_scale */
mv = DIV_ROUND_CLOSEST(cvb->c2 * speedo, s_scale);
mv = DIV_ROUND_CLOSEST((mv + cvb->c1) * speedo, s_scale) + cvb->c0;
return mv;
}
static int round_cvb_voltage(int mv, int v_scale,
const struct rail_alignment *align)
{
/* combined: apply voltage scale and round to cvb alignment step */
int uv;
int step = (align->step_uv ? : 1000) * v_scale;
int offset = align->offset_uv * v_scale;
uv = max(mv * 1000, offset) - offset;
uv = DIV_ROUND_UP(uv, step) * align->step_uv + align->offset_uv;
return uv / 1000;
}
enum {
DOWN,
UP
};
static int round_voltage(int mv, const struct rail_alignment *align, int up)
{
if (align->step_uv) {
int uv;
uv = max(mv * 1000, align->offset_uv) - align->offset_uv;
uv = (uv + (up ? align->step_uv - 1 : 0)) / align->step_uv;
return (uv * align->step_uv + align->offset_uv) / 1000;
}
return mv;
}
static int build_opp_table(const struct cvb_table *d,
int speedo_value,
unsigned long max_freq,
struct device *opp_dev)
{
int i, ret, dfll_mv, min_mv, max_mv;
const struct cvb_table_freq_entry *table = NULL;
const struct rail_alignment *align = &d->alignment;
min_mv = round_voltage(d->min_millivolts, align, UP);
max_mv = round_voltage(d->max_millivolts, align, DOWN);
for (i = 0; i < MAX_DVFS_FREQS; i++) {
table = &d->cvb_table[i];
if (!table->freq || (table->freq > max_freq))
break;
/*
* FIXME after clk_round_rate/clk_determine_rate prototypes
* have been updated
*/
if (table->freq & (1<<31))
continue;
dfll_mv = get_cvb_voltage(
speedo_value, d->speedo_scale, &table->coefficients);
dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align);
dfll_mv = clamp(dfll_mv, min_mv, max_mv);
ret = dev_pm_opp_add(opp_dev, table->freq, dfll_mv * 1000);
if (ret)
return ret;
}
return 0;
}
/**
* tegra_cvb_build_opp_table - build OPP table from Tegra CVB tables
* @cvb_tables: array of CVB tables
* @sz: size of the previously mentioned array
* @process_id: process id of the HW module
* @speedo_id: speedo id of the HW module
* @speedo_value: speedo value of the HW module
* @max_rate: highest safe clock rate
* @opp_dev: the struct device * for which the OPP table is built
*
* On Tegra, a CVB table encodes the relationship between operating voltage
* and safe maximal frequency for a given module (e.g. GPU or CPU). This
* function calculates the optimal voltage-frequency operating points
* for the given arguments and exports them via the OPP library for the
* given @opp_dev. Returns a pointer to the struct cvb_table that matched
* or an ERR_PTR on failure.
*/
const struct cvb_table *tegra_cvb_build_opp_table(
const struct cvb_table *cvb_tables,
size_t sz, int process_id,
int speedo_id, int speedo_value,
unsigned long max_rate,
struct device *opp_dev)
{
int i, ret;
for (i = 0; i < sz; i++) {
const struct cvb_table *d = &cvb_tables[i];
if (d->speedo_id != -1 && d->speedo_id != speedo_id)
continue;
if (d->process_id != -1 && d->process_id != process_id)
continue;
ret = build_opp_table(d, speedo_value, max_rate, opp_dev);
return ret ? ERR_PTR(ret) : d;
}
return ERR_PTR(-EINVAL);
}
/*
* Utility functions for parsing Tegra CVB voltage tables
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#ifndef __DRIVERS_CLK_TEGRA_CVB_H
#define __DRIVERS_CLK_TEGRA_CVB_H
#include <linux/types.h>
struct device;
#define MAX_DVFS_FREQS 40
struct rail_alignment {
int offset_uv;
int step_uv;
};
struct cvb_coefficients {
int c0;
int c1;
int c2;
};
struct cvb_table_freq_entry {
unsigned long freq;
struct cvb_coefficients coefficients;
};
struct cvb_cpu_dfll_data {
u32 tune0_low;
u32 tune0_high;
u32 tune1;
};
struct cvb_table {
int speedo_id;
int process_id;
int min_millivolts;
int max_millivolts;
struct rail_alignment alignment;
int speedo_scale;
int voltage_scale;
struct cvb_table_freq_entry cvb_table[MAX_DVFS_FREQS];
struct cvb_cpu_dfll_data cpu_dfll_data;
};
const struct cvb_table *tegra_cvb_build_opp_table(
const struct cvb_table *cvb_tables,
size_t sz, int process_id,
int speedo_id, int speedo_value,
unsigned long max_rate,
struct device *opp_dev);
#endif
/*
* This header provides Tegra124-specific constants for binding
* nvidia,tegra124-car.
*/
#ifndef _DT_BINDINGS_RESET_TEGRA124_CAR_H
#define _DT_BINDINGS_RESET_TEGRA124_CAR_H
#define TEGRA124_RESET(x) (6 * 32 + (x))
#define TEGRA124_RST_DFLL_DVCO TEGRA124_RESET(0)
#endif /* _DT_BINDINGS_RESET_TEGRA124_CAR_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment