fix comnment/printk typos concerning "empty"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/scsi/ChangeLog.lpfc

@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
 	  lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
 	  void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
 	  remove checking of list emptiness before calling lpfc_disc_done,
-	  it handles the emtpy list case just fine and the additional
+	  it handles the empty list case just fine and the additional
 	  instructions cost less then the bustlocked spinlock operations.
 	* Integrated patch from Christoph Hellwig: This adds a new 64bit
 	  counter instead, brd_no isn't reused anymore.  Also some tiny

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel,
 	imxdma->resbytes = dma_length;
 
 	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
 		       channel);
 		return -EINVAL;
 	}

drivers/scsi/aic7xxx_old/aic7xxx.seq

@@ -615,7 +615,7 @@ ultra2_dmafifoflush:
 			 * went empty and the next bit of data is copied from
 			 * the SCSI fifo into the PCI fifo.  It should only
 			 * come on when both FIFOs (meaning the entire FIFO
-			 * chain) are emtpy.  Since it can take up to 4 cycles
+			 * chain) are empty.  Since it can take up to 4 cycles
 			 * for new data to be copied from the SCSI fifo into
 			 * the PCI fifo, testing for FIFOEMP status for 4
 			 * extra times gives the needed time for any

drivers/serial/nwpserial.c

@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
 
 	uart_console_write(&up->port, s, count, nwpserial_console_putchar);
 
-	/* wait for transmitter to become emtpy */
+	/* wait for transmitter to become empty */
 	while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
 		cpu_relax();
 

sound/usb/pcm.c

@@ -636,7 +636,7 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params,
 		min_datainterval = min(min_datainterval, fp->datainterval);
 	}
 	if (min_datainterval == 0xff) {
-		hwc_debug("  --> get emtpy\n");
+		hwc_debug("  --> get empty\n");
 		it->empty = 1;
 		return -EINVAL;
 	}