net: phy: dp83td510: add SQI support

Convert MSE (mean-square error) values to SNR and split it SQI (Signal Quality
Indicator) ranges. The used ranges are taken from "OPEN ALLIANCE - Advanced
diagnostic features for 100BASE-T1 automotive Ethernet PHYs"
specification.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220620115601.2035452-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/dp83td510.c

@@ -27,6 +27,27 @@
 #define DP83TD510E_AN_STAT_1			0x60c
 #define DP83TD510E_MASTER_SLAVE_RESOL_FAIL	BIT(15)
 
+#define DP83TD510E_MSE_DETECT			0xa85
+
+#define DP83TD510_SQI_MAX	7
+
+/* Register values are converted to SNR(dB) as suggested by
+ * "Application Report - DP83TD510E Cable Diagnostics Toolkit":
+ * SNR(dB) = -10 * log10 (VAL/2^17) - 1.76 dB.
+ * SQI ranges are implemented according to "OPEN ALLIANCE - Advanced diagnostic
+ * features for 100BASE-T1 automotive Ethernet PHYs"
+ */
+static const u16 dp83td510_mse_sqi_map[] = {
+	0x0569, /* < 18dB */
+	0x044c, /* 18dB =< SNR < 19dB */
+	0x0369, /* 19dB =< SNR < 20dB */
+	0x02b6, /* 20dB =< SNR < 21dB */
+	0x0227, /* 21dB =< SNR < 22dB */
+	0x01b6, /* 22dB =< SNR < 23dB */
+	0x015b, /* 23dB =< SNR < 24dB */
+	0x0000  /* 24dB =< SNR */
+};
+
 static int dp83td510_config_intr(struct phy_device *phydev)
 {
 	int ret;
@@ -164,6 +185,32 @@ static int dp83td510_config_aneg(struct phy_device *phydev)
 	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
+static int dp83td510_get_sqi(struct phy_device *phydev)
+{
+	int sqi, ret;
+	u16 mse_val;
+
+	if (!phydev->link)
+		return 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_MSE_DETECT);
+	if (ret < 0)
+		return ret;
+
+	mse_val = 0xFFFF & ret;
+	for (sqi = 0; sqi < ARRAY_SIZE(dp83td510_mse_sqi_map); sqi++) {
+		if (mse_val >= dp83td510_mse_sqi_map[sqi])
+			return sqi;
+	}
+
+	return -EINVAL;
+}
+
+static int dp83td510_get_sqi_max(struct phy_device *phydev)
+{
+	return DP83TD510_SQI_MAX;
+}
+
 static int dp83td510_get_features(struct phy_device *phydev)
 {
 	/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
@@ -192,6 +239,8 @@ static struct phy_driver dp83td510_driver[] = {
 	.get_features	= dp83td510_get_features,
 	.config_intr	= dp83td510_config_intr,
 	.handle_interrupt = dp83td510_handle_interrupt,
+	.get_sqi	= dp83td510_get_sqi,
+	.get_sqi_max	= dp83td510_get_sqi_max,
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,