Skip to content

L
linux
Commit a82fa3a4 authored by Scott Feldman's avatar Scott Feldman Committed by Jeff Garzik
Browse files
Options

e100 net driver update: 

* Added Documentation/networking/e100.txt.
* Added drivers/net/Config.help text for CONFIG_E100.
* Added ethtool ETHTOOL_PHYS_ID support
* Made ethtool WoL advertisement more selective on h/w controller
version.
parent 3e60a0a8
Hide whitespace changes
Inline Side-by-side
Showing with 460 additions and 17 deletions
Documentation/networking/e100.txt 0 → 100644
View file @ a82fa3a4
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
April 9, 2002
Contents
========
- In This Release
- Supported Adapters
- Command Line Parameters
- CPU Cycle Saver
- Additional Configurations
- Support
In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
Adapters, version 2.0.x. This driver includes support for Itanium(TM)-based
systems.
New for this release:
- Additional ethtool functionality, including link status test and EEPROM
read/write. A third-party application can use the ethtool interface to
get and set driver parameters.
- Support for Zero copy on 82550-based adapters. This feature provides
faster data throughput and significant CPU usage improvement in systems
that use the relevant system call (sendfile(2)).
- Support for large MTU-enabling interface (1504 bytes) with kernel's
VLAN module
- Support for polling on RX
- Support for Wake On LAN* on 82550 and 82559-based adapters
Supported Adapters
==================
The following Intel network adapters are compatible with the drivers
in this release:
Controller Adapter Name Board IDs
---------- ------------ ---------
82558 PRO/100+ PCI Adapter 668081-xxx, 689661-xxx
82558 PRO/100+ Management Adapter 691334-xxx, 701738-xxx,
721383-xxx
82558 PRO/100+ Dual Port Server Adapter 714303-xxx, 711269-xxx,
A28276-xxx
82558 PRO/100+ PCI Server Adapter 710550-xxx
82550 PRO/100 S Server Adapter 752438-xxx (82550)
82559 A56831-xxx, A10563-xxx,
A12171-xxx, A12321-xxx,
A12320-xxx, A12170-xxx
748568-xxx (82559)
748565-xxx (82559)
82550 PRO/100 S Desktop Adapter 751767-xxx (82550)
82559 748592-xxx, A12167-xxx,
A12318-xxx, A12317-xxx,
A12165-xxx
748569-xxx (82559)
82559 PRO/100+ Server Adapter 729757-xxx
82559 PRO/100 S Management Adapter 748566-xxx, 748564-xxx
82550 PRO/100 S Dual Port Server Adapter A56831-xxx
82551 PRO/100 M Desktop Adapter A80897-xxx
PRO/100 S Advanced Management Adapter 747842-xxx, 745171-xxx
CNR PRO/100 VE Desktop Adapter A10386-xxx, A10725-xxx,
A23801-xxx, A19716-xxx
PRO/100 VM Desktop Adapter A14323-xxx, A19725-xxx,
A23801-xxx, A22220-xxx,
A23796-xxx
To verify that your adapter is supported, find the board ID number on the
adapter. Look for a label that has a barcode and a number in the format
123456-001 (six digits hyphen three digits). Match this to the list of
numbers above.
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
For the latest Intel PRO/100 network driver for Linux, see:
http://appsr.intel.com/scripts-df/support_intel.asp
Command Line Parameters
=======================
The following parameters are used by entering them on the command line with
the modprobe or insmod command. For example, with two Intel PRO/100 PCI
adapters, entering:
modprobe e100 TxDescriptors=32,128
loads the e100 driver with 32 TX resources for the first adapter and 128 TX
resources for the second adapter. This configuration favors the second
adapter. The driver supports up to 16 network adapters concurrently.
NOTE: Giving any command line option the value "-1" causes the driver to use
the appropriate default value for that option, as if no value was
specified.
BundleMax
Valid Range: 0x1-0xFFFF
Default Value: 6
This parameter holds the maximum number of packets in a bundle. Suggested
values range from 2 to 10. See "CPU Cycle Saver."
BundleSmallFr
Valid Range: 0-1 (0=off, 1=on)
Default Value: 0
The value 1 (on) causes small packets (less than 128 bytes) to be bundled.
See "CPU Cycle Saver."
e100_speed_duplex
Valid Range: 0-4 (1=10half;2=10full;3=100half;4=100full)
Default Value: 0
The default value of 0 is set to auto-negotiate if the link partner is set
to auto-negotiate. If the link partner is forced, e100_speed_duplex
defaults to half-duplex.
Example usage: insmod e100.o e100_speed_duplex=4,4 (for two adapters)
flow_control
Valid Range: 0-1 (0=off, 1=on)
Default Value: 0
This parameter controls the automatic generation(Tx) and response(Rx) to
Ethernet PAUSE frames. flow_control should NOT be set to 1 when the e100
adapter is connected to an interface that does not support Ethernet PAUSE
frames and when the e100_speed_duplex parameter is NOT set to zero.
IntDelay
Valid Range: 0-0xFFFF (0=off)
Default Value: 1536
This parameter holds the number of time units (in adapter terminology)
until the adapter generates an interrupt. The recommended value for
IntDelay is 0x600 (upon initialization). Suggested values range from
0x200h to 0x800. See "CPU Cycle Saver."
IFS
Valid Range: 0-1 (0=off, 1=on)
Default Value: 1
Inter Frame Spacing (IFS) aims to reduce the number of Ethernet frame
collisions by altering the time between frame transmissions. When IFS is
enabled the driver tries to find an optimal IFS value. However, some
switches function better when IFS is disabled.
PollingMaxWork
Valid Range: 1-1024 (max number of RxDescriptors)
Default Value: Specified number of RxDescriptors
This value specifies the maximum number of receive packets that are
processed on a single polling call. This parameter is invalid if
RxCongestionControl is set to 0.
RxCongestionControl
Valid Range: 0-1 (0=off, 1=on)
Default Value: 1
1 enables polling mode. When the link is congested, the driver can decide
to handle received packets by polling them, instead of waiting until
interrupts occur.
RxDescriptors
Valid Range: 8-1024
Default Value: 64
This parameter defines the number of receive descriptors allocated by
the driver. Increasing this value allows the driver to buffer more
incoming packets before the driver is required to service an interrupt.
The maximum value for Itanium-based systems is 64.
TxDescriptors
Valid Range: 19-1024
Default Value: 64
This value is the number of transmit descriptors allocated by the driver.
Increasing this value allows the protocol stack to queue more transmits at
the driver level. The maximum value for Itanium-based systems is 64.
ucode (not available for 82557-based adapters)
Valid Range: 0-1 (0=off, 1=on)
Default Value: 0 for 82558-based adapters
1 for 82559(and higher)-based adapters
On uploads the micro code to the adapter, which enables CPU Cycle Saver.
See the section "CPU Cycle Saver" below.
Example usage: insmod e100.o ucode=0 (does not reduce CPU usage)
XsumRX
Valid Range: 0-1 (0=off, 1=on)
Default Value: 1
On allows Rx checksum offloading for TCP/UDP packets. Requires that the
hardware support this feature.
CPU Cycle Saver
================
CPU Cycle Saver reduces CPU utilization by reducing the number of interrupts
that the adapter generates.
When CPU Cycle Saver is turned off, the adapter generates one interrupt for
every frame that is received. This means that the operating system stops what
it is doing and switches to the network driver in order to process the
receive.
When CPU Cycle Saver is on, the adapter does not generate an interrupt for
every frame it receives. Instead, it waits until it receives several frames
before generating an interrupt. This reduces the amount of time spent
switching to and from the driver.
CPU Cycle Saver consists of these arguments: IntDelay, BundleMax and
BundleSmallFr. When IntDelay is increased, the adapter waits longer for
frames to arrive before generating the interrupt. By increasing BundleMax,
the network adapter waits for the number of frames specified to arrive before
generating the interrupt. When BundleSmallFr is disabled, the adapter does
not bundle packets that are smaller than 128 bytes. Such small packets are
often, but not always, control packets that are better served immediately.
For most users, it is recommended that CPU Cycle Saver be used with the
default values specified in the Command Line Parameters section. However, in
some cases, performance problems may occur with CPU Cycle Saver. If such
problems are observed, we recommend turning off this feature by setting
ucode=0.
Support
=======
For general information and support, go to the Intel support website at:
http://support.intel.com
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related to
the issue to linux.nics@intel.com.
License
=======
This software program is released under the terms of a license agreement
between you ('Licensee') and Intel. Do not use or load this software or any
associated materials (collectively, the 'Software') until you have carefully
read the full terms and conditions of the LICENSE located in this software
package. By loading or using the Software, you agree to the terms of this
Agreement. If you do not agree with the terms of this Agreement, do not
install or use the Software.
* Other names and brands may be claimed as the property of others.
MAINTAINERS
View file @ a82fa3a4
......@@ -795,6 +795,11 @@ P: Tigran Aivazian
M: tigran@veritas.com
S: Maintained
INTEL PRO/100 ETHERNET SUPPORT
P: Scott Feldman
M: scott.feldman@intel.com
S: Supported
INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
P: Chris Leech
M: christopher.leech@intel.com
......
drivers/net/Config.help
View file @ a82fa3a4
......@@ -1358,6 +1358,80 @@ CONFIG_EEPRO100
a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
CONFIG_E100
This driver supports Intel(R) PRO/100 family of adapters, which
includes:
Controller Adapter Name Board IDs
---------- ------------ ---------
82558 PRO/100+ PCI Adapter 668081-xxx,
689661-xxx
82558 PRO/100+ Management Adapter 691334-xxx,
701738-xxx,
721383-xxx
82558 PRO/100+ Dual Port Server Adapter 714303-xxx,
711269-xxx,
A28276-xxx
82558 PRO/100+ PCI Server Adapter 710550-xxx
82550 PRO/100 S Server Adapter 752438-xxx
82559 A56831-xxx,
A10563-xxx,
A12171-xxx,
A12321-xxx,
A12320-xxx,
A12170-xxx
748568-xxx
748565-xxx
82550 PRO/100 S Desktop Adapter 751767-xxx
82559 748592-xxx,
A12167-xxx,
A12318-xxx,
A12317-xxx,
A12165-xxx,
748569-xxx
82559 PRO/100+ Server Adapter 729757-xxx
82559 PRO/100 S Management Adapter 748566-xxx,
748564-xxx
82550 PRO/100 S Dual Port Server Adapter A56831-xxx
82551 PRO/100 M Desktop Adapter A80897-xxx
PRO/100 S Advanced Management Adapter
747842-xxx,
745171-xxx
CNR PRO/100 VE Desktop Adapter A10386-xxx,
A10725-xxx,
A23801-xxx,
A19716-xxx
PRO/100 VM Desktop Adapter A14323-xxx,
A19725-xxx,
A23801-xxx,
A22220-xxx,
A23796-xxx
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
in the format 123456-001 (six digits hyphen three digits). Match
this to the list of numbers above.
For more information on how to identify your adapter, go to the
Adapter & Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
For the latest Intel PRO/100 network driver for Linux, see:
http://appsr.intel.com/scripts-df/support_intel.asp
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called e100.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_FEALNX
Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
cards. Specifications and data at
......
drivers/net/e100/e100.h
View file @ a82fa3a4
......@@ -503,6 +503,7 @@ enum led_state_e {
#define IS_BACHELOR 0x00000010 /* set if 82558 or newer board */
#define IS_ICH 0x00000020
#define DF_SPEED_FORCED 0x00000040 /* set if speed is forced */
#define LED_IS_ON 0x00000080 /* LED is turned ON by the driver */
typedef struct net_device_stats net_dev_stats_t;
......@@ -909,7 +910,6 @@ struct ethtool_lpbk_data{
};
#endif
struct e100_private {
u32 flags; /* board management flags */
u32 tx_per_underrun; /* number of good tx frames per underrun */
......@@ -998,8 +998,11 @@ struct e100_private {
u32 wolopts;
u16 ip_lbytes;
#endif
#ifdef ETHTOOL_TEST
struct ethtool_lpbk_data loopback;
#ifdef ETHTOOL_TEST
struct ethtool_lpbk_data loopback;
#endif
#ifdef ETHTOOL_PHYS_ID
struct timer_list blink_timer; /* led blink timer id */
#endif
#ifdef CONFIG_PM
......
drivers/net/e100/e100_config.c
View file @ a82fa3a4
......@@ -593,7 +593,6 @@ e100_config_wol(struct e100_private *bdp)
}
#endif
#ifdef ETHTOOL_TEST
/**
* e100_config_loopback_mode
* @bdp: atapter's private data struct
......@@ -690,5 +689,4 @@ e100_config_dynamic_tbd(struct e100_private *bdp, unsigned char enable)
return bc_changed;
}
#endif
drivers/net/e100/e100_main.c
View file @ a82fa3a4
......@@ -163,6 +163,9 @@ static char *test_strings[] = {
"E100_LPBK_PHY_FAIL"
};
#endif
#ifdef ETHTOOL_PHYS_ID
static int e100_ethtool_led_blink(struct net_device *, struct ifreq *);
#endif
#endif /*E100_ETHTOOL_IOCTL */
......@@ -182,7 +185,7 @@ static void e100_non_tx_background(unsigned long);
/* Global Data structures and variables */
char e100_copyright[] __devinitdata = "Copyright (c) 2002 Intel Corporation";
#define E100_VERSION "2.0.27-pre3"
#define E100_VERSION "2.0.30-k1"
#define E100_FULL_DRIVER_NAME "Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver "
......@@ -691,9 +694,10 @@ e100_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
#ifdef ETHTOOL_GWOL
/* Disabling all WOLs as initialization */
bdp->wolsupported = bdp->wolopts = 0;
if (bdp->rev_id >= D101MA_REV_ID) {
bdp->wolsupported =
WAKE_PHY | WAKE_UCAST | WAKE_ARP | WAKE_MAGIC;
if (bdp->rev_id >= D101A4_REV_ID) {
bdp->wolsupported = WAKE_PHY | WAKE_MAGIC;
if (bdp->rev_id >= D101MA_REV_ID)
bdp->wolsupported |= WAKE_UCAST | WAKE_ARP;
bdp->wolopts = WAKE_MAGIC;
}
#endif
......@@ -3334,6 +3338,11 @@ e100_do_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
case ETHTOOL_GSTRINGS:
rc = e100_ethtool_gstrings(dev,ifr);
break;
#endif
#ifdef ETHTOOL_PHYS_ID
case ETHTOOL_PHYS_ID:
rc = e100_ethtool_led_blink(dev,ifr);
break;
#endif
default:
break;
......@@ -3641,6 +3650,94 @@ e100_ethtool_eeprom(struct net_device *dev, struct ifreq *ifr)
}
#endif
#ifdef ETHTOOL_PHYS_ID
#define E100_BLINK_INTERVAL (HZ/4)
/**
* e100_led_control
* @bdp: atapter's private data struct
* @led_mdi_op: led operation
*
* Software control over adapter's led. The possible operations are:
* TURN LED OFF, TURN LED ON and RETURN LED CONTROL TO HARDWARE.
*/
static void
e100_led_control(struct e100_private *bdp, u16 led_mdi_op)
{
spin_lock_bh(&bdp->mdi_access_lock);
e100_mdi_write(bdp, PHY_82555_LED_SWITCH_CONTROL,
bdp->phy_addr, led_mdi_op);
spin_unlock_bh(&bdp->mdi_access_lock);
}
/**
* e100_led_blink_callback
* @data: pointer to atapter's private data struct
*
* Blink timer callback function. Toggles ON/OFF led status bit and calls
* led hardware access function.
*/
static void
e100_led_blink_callback(unsigned long data)
{
struct e100_private *bdp = (struct e100_private *) data;
if(bdp->flags & LED_IS_ON) {
bdp->flags &= ~LED_IS_ON;
e100_led_control(bdp, PHY_82555_LED_OFF);
} else {
bdp->flags |= LED_IS_ON;
if (bdp->rev_id >= D101MA_REV_ID)
e100_led_control(bdp, PHY_82555_LED_ON_559);
else
e100_led_control(bdp, PHY_82555_LED_ON_PRE_559);
}
mod_timer(&bdp->blink_timer, jiffies + E100_BLINK_INTERVAL);
}
/**
* e100_ethtool_led_blink
* @dev: pointer to atapter's net_device struct
* @ifr: pointer to ioctl request structure
*
* Blink led ioctl handler. Initialtes blink timer and sleeps until
* blink period expires. Than it kills timer and returns. The led control
* is returned back to hardware when blink timer is killed.
*/
static int
e100_ethtool_led_blink(struct net_device *dev, struct ifreq *ifr)
{
struct e100_private *bdp;
struct ethtool_value ecmd;
bdp = dev->priv;
if (copy_from_user(&ecmd, ifr->ifr_data, sizeof (ecmd)))
return -EFAULT;
if(!bdp->blink_timer.function) {
init_timer(&bdp->blink_timer);
bdp->blink_timer.function = e100_led_blink_callback;
bdp->blink_timer.data = (unsigned long) bdp;
}
mod_timer(&bdp->blink_timer, jiffies);
set_current_state(TASK_INTERRUPTIBLE);
if ((!ecmd.data) || (ecmd.data > MAX_SCHEDULE_TIMEOUT / HZ))
ecmd.data = MAX_SCHEDULE_TIMEOUT / HZ;
schedule_timeout(ecmd.data * HZ);
del_timer_sync(&bdp->blink_timer);
e100_led_control(bdp, PHY_82555_LED_NORMAL_CONTROL);
return 0;
}
#endif
static inline int __devinit
e100_10BaseT_adapter(struct e100_private *bdp)
{
......
drivers/net/e100/e100_proc.c
View file @ a82fa3a4
......@@ -548,7 +548,7 @@ read_bundle_max_def(char *page, char **start, off_t off,
int len;
len = read_int_param(page, "CPU Saver Maximum Bundle",
"Sets the value for CPU saver's maximum value",
"Sets CPU saver's maximum value",
E100_DEFAULT_CPUSAVER_BUNDLE_MAX, 0x1, 0xFFFF);
return generic_read(page, start, off, count, eof, len);
......
drivers/net/e100/e100_test.c
View file @ a82fa3a4
......@@ -69,6 +69,7 @@ AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#include "e100.h"
#include "e100_config.h"
#ifdef ETHTOOL_TEST
......@@ -458,10 +459,3 @@ e100_diag_loopback_free (struct e100_private *bdp)
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7