Commit a8404ce5 authored by David S. Miller's avatar David S. Miller

Merge branch 'r8152'

Hayes Wang says:

====================
r8152: support setting eee by ethtool

Modify some definitions about EEE, and add the support of setting
the EEE through ethtool.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 18c565eb df35d283
......@@ -22,6 +22,8 @@
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <net/ip6_checksum.h>
#include <uapi/linux/mdio.h>
#include <linux/mdio.h>
/* Version Information */
#define DRIVER_VERSION "v1.06.0 (2014/03/03)"
......@@ -129,7 +131,9 @@
#define OCP_SRAM_ADDR 0xa436
#define OCP_SRAM_DATA 0xa438
#define OCP_DOWN_SPEED 0xa442
#define OCP_EEE_CFG2 0xa5d0
#define OCP_EEE_ABLE 0xa5c4
#define OCP_EEE_ADV 0xa5d0
#define OCP_EEE_LPABLE 0xa5d2
#define OCP_ADC_CFG 0xbc06
/* SRAM Register */
......@@ -361,7 +365,8 @@
#define EEE_NWAY_EN 0x1000
#define TX_QUIET_EN 0x0200
#define RX_QUIET_EN 0x0100
#define SDRISETIME 0x0010 /* bit 4 ~ 6 */
#define sd_rise_time_mask 0x0070
#define sd_rise_time(x) (min(x, 7) << 4) /* bit 4 ~ 6 */
#define RG_RXLPI_MSK_HFDUP 0x0008
#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */
......@@ -373,7 +378,8 @@
#define RG_EEEPRG_EN 0x0010
/* OCP_EEE_CONFIG3 */
#define FST_SNR_EYE_R 0x1500 /* bit 7 ~ 15 */
#define fast_snr_mask 0xff80
#define fast_snr(x) (min(x, 0x1ff) << 7) /* bit 7 ~ 15 */
#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */
#define MSK_PH 0x0006 /* bit 0 ~ 3 */
......@@ -382,11 +388,6 @@
#define FUN_ADDR 0x0000
#define FUN_DATA 0x4000
/* bit[4:0] device addr */
#define DEVICE_ADDR 0x0007
/* OCP_EEE_DATA */
#define EEE_ADDR 0x003C
#define EEE_DATA 0x0002
/* OCP_EEE_CFG */
#define CTAP_SHORT_EN 0x0040
......@@ -395,10 +396,6 @@
/* OCP_DOWN_SPEED */
#define EN_10M_BGOFF 0x0080
/* OCP_EEE_CFG2 */
#define MY1000_EEE 0x0004
#define MY100_EEE 0x0002
/* OCP_ADC_CFG */
#define CKADSEL_L 0x0100
#define ADC_EN 0x0080
......@@ -577,6 +574,8 @@ struct r8152 {
void (*up)(struct r8152 *);
void (*down)(struct r8152 *);
void (*unload)(struct r8152 *);
int (*eee_get)(struct r8152 *, struct ethtool_eee *);
int (*eee_set)(struct r8152 *, struct ethtool_eee *);
} rtl_ops;
int intr_interval;
......@@ -2957,43 +2956,92 @@ static int rtl8152_close(struct net_device *netdev)
return res;
}
static void r8152b_enable_eee(struct r8152 *tp)
static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg)
{
ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev);
ocp_reg_write(tp, OCP_EEE_DATA, reg);
ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev);
}
static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg)
{
u16 data;
r8152_mmd_indirect(tp, dev, reg);
data = ocp_reg_read(tp, OCP_EEE_DATA);
ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
return data;
}
static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
{
r8152_mmd_indirect(tp, dev, reg);
ocp_reg_write(tp, OCP_EEE_DATA, data);
ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
}
static void r8152_eee_en(struct r8152 *tp, bool enable)
{
u16 config1, config2, config3;
u32 ocp_data;
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
if (enable) {
ocp_data |= EEE_RX_EN | EEE_TX_EN;
config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
config1 |= sd_rise_time(1);
config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
config3 |= fast_snr(42);
} else {
ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
RX_QUIET_EN);
config1 |= sd_rise_time(7);
config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN);
config3 |= fast_snr(511);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN |
EEE_10_CAP | EEE_NWAY_EN |
TX_QUIET_EN | RX_QUIET_EN |
SDRISETIME | RG_RXLPI_MSK_HFDUP |
SDFALLTIME);
ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN |
RG_LDVQUIET_EN | RG_CKRSEL |
RG_EEEPRG_EN);
ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH);
ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR);
ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR);
ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR);
ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA);
ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
}
static void r8153_enable_eee(struct r8152 *tp)
static void r8152b_enable_eee(struct r8152 *tp)
{
r8152_eee_en(tp, true);
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX);
}
static void r8153_eee_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
u16 data;
u16 config;
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config = ocp_reg_read(tp, OCP_EEE_CFG);
if (enable) {
ocp_data |= EEE_RX_EN | EEE_TX_EN;
config |= EEE10_EN;
} else {
ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
config &= ~EEE10_EN;
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
data = ocp_reg_read(tp, OCP_EEE_CFG);
data |= EEE10_EN;
ocp_reg_write(tp, OCP_EEE_CFG, data);
data = ocp_reg_read(tp, OCP_EEE_CFG2);
data |= MY1000_EEE | MY100_EEE;
ocp_reg_write(tp, OCP_EEE_CFG2, data);
ocp_reg_write(tp, OCP_EEE_CFG, config);
}
static void r8153_enable_eee(struct r8152 *tp)
{
r8153_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
}
static void r8152b_enable_fc(struct r8152 *tp)
......@@ -3322,6 +3370,122 @@ static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
}
}
static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u32 ocp_data, lp, adv, supported = 0;
u16 val;
val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
supported = mmd_eee_cap_to_ethtool_sup_t(val);
val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
adv = mmd_eee_adv_to_ethtool_adv_t(val);
val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
lp = mmd_eee_adv_to_ethtool_adv_t(val);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
ocp_data &= EEE_RX_EN | EEE_TX_EN;
eee->eee_enabled = !!ocp_data;
eee->eee_active = !!(supported & adv & lp);
eee->supported = supported;
eee->advertised = adv;
eee->lp_advertised = lp;
return 0;
}
static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
r8152_eee_en(tp, eee->eee_enabled);
if (!eee->eee_enabled)
val = 0;
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
return 0;
}
static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u32 ocp_data, lp, adv, supported = 0;
u16 val;
val = ocp_reg_read(tp, OCP_EEE_ABLE);
supported = mmd_eee_cap_to_ethtool_sup_t(val);
val = ocp_reg_read(tp, OCP_EEE_ADV);
adv = mmd_eee_adv_to_ethtool_adv_t(val);
val = ocp_reg_read(tp, OCP_EEE_LPABLE);
lp = mmd_eee_adv_to_ethtool_adv_t(val);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
ocp_data &= EEE_RX_EN | EEE_TX_EN;
eee->eee_enabled = !!ocp_data;
eee->eee_active = !!(supported & adv & lp);
eee->supported = supported;
eee->advertised = adv;
eee->lp_advertised = lp;
return 0;
}
static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
r8153_eee_en(tp, eee->eee_enabled);
if (!eee->eee_enabled)
val = 0;
ocp_reg_write(tp, OCP_EEE_ADV, val);
return 0;
}
static int
rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
{
struct r8152 *tp = netdev_priv(net);
int ret;
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
ret = tp->rtl_ops.eee_get(tp, edata);
usb_autopm_put_interface(tp->intf);
out:
return ret;
}
static int
rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
{
struct r8152 *tp = netdev_priv(net);
int ret;
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
ret = tp->rtl_ops.eee_set(tp, edata);
usb_autopm_put_interface(tp->intf);
out:
return ret;
}
static struct ethtool_ops ops = {
.get_drvinfo = rtl8152_get_drvinfo,
.get_settings = rtl8152_get_settings,
......@@ -3334,6 +3498,8 @@ static struct ethtool_ops ops = {
.get_strings = rtl8152_get_strings,
.get_sset_count = rtl8152_get_sset_count,
.get_ethtool_stats = rtl8152_get_ethtool_stats,
.get_eee = rtl_ethtool_get_eee,
.set_eee = rtl_ethtool_set_eee,
};
static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
......@@ -3475,6 +3641,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->up = rtl8152_up;
ops->down = rtl8152_down;
ops->unload = rtl8152_unload;
ops->eee_get = r8152_get_eee;
ops->eee_set = r8152_set_eee;
ret = 0;
break;
case PRODUCT_ID_RTL8153:
......@@ -3484,6 +3652,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153_set_eee;
ret = 0;
break;
default:
......@@ -3500,6 +3670,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153_set_eee;
ret = 0;
break;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment