[PATCH] Alchemy update

This is an update of the AMD Alchemy support for 2.5.

(This is way behind what we have for 2.4 but forward porting is non-trivial
and work in progress.)

arch/mips/au1000/common/Makefile

@@ -5,14 +5,14 @@
 #
 # Makefile for the Alchemy Au1000 CPU, generic files.
 #
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
 
-obj-y := prom.o dbg_io.o int-handler.o irq.o puts.o time.o reset.o
-
-obj-$(CONFIG_AU1000_UART) += serial.o             
-obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o             
-obj-$(CONFIG_BLK_DEV_INITRD) += ramdisk.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+obj-y				+= prom.o int-handler.o dma.o irq.o puts.o \
+				   time.o reset.o clocks.o power.o
 
-ramdisk.o: 
-	mkramobj ramdisk ramdisk.o
+obj-$(CONFIG_AU1X00_USB_DEVICE)	+= usbdev.o
+obj-$(CONFIG_KGDB)		+= dbg_io.o
+obj-$(CONFIG_RTC)		+= rtc.o

arch/mips/au1000/common/clocks.c

+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Simple Au1000 clocks routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *		ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <asm/au1000.h>
+
+static unsigned int au1x00_clock; // Hz
+static unsigned int lcd_clock;    // KHz
+static unsigned long uart_baud_base;
+
+/*
+ * Set the au1000_clock
+ */
+void set_au1x00_speed(unsigned int new_freq)
+{
+	au1x00_clock = new_freq;
+}
+
+unsigned int get_au1x00_speed(void)
+{
+	return au1x00_clock;
+}
+
+
+
+/*
+ * The UART baud base is not known at compile time ... if
+ * we want to be able to use the same code on different
+ * speed CPUs.
+ */
+unsigned long get_au1x00_uart_baud_base(void)
+{
+	return uart_baud_base;
+}
+
+void set_au1x00_uart_baud_base(unsigned long new_baud_base)
+{
+	uart_baud_base = new_baud_base;
+}
+
+/*
+ * Calculate the Au1x00's LCD clock based on the current
+ * cpu clock and the system bus clock, and try to keep it
+ * below 40 MHz (the Pb1000 board can lock-up if the LCD
+ * clock is over 40 MHz).
+ */
+void set_au1x00_lcd_clock(void)
+{
+	unsigned int static_cfg0;
+	unsigned int sys_busclk =
+		(get_au1x00_speed()/1000) /
+		((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+
+	static_cfg0 = au_readl(MEM_STCFG0);
+
+	if (static_cfg0 & (1<<11))
+		lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
+	else
+		lcd_clock = sys_busclk / 4;
+
+	if (lcd_clock > 50000) /* Epson MAX */
+			printk("%s: warning: LCD clock too high (%d KHz)\n", 
+					__FUNCTION__, lcd_clock);
+}
+
+unsigned int get_au1x00_lcd_clock(void)
+{
+	return lcd_clock;
+}
+
+EXPORT_SYMBOL(get_au1x00_lcd_clock);

arch/mips/au1000/common/dbg_io.c

@@ -3,13 +3,13 @@
 #include <asm/io.h>
 #include <asm/au1000.h>
 
-#ifdef CONFIG_REMOTE_DEBUG
+#ifdef CONFIG_KGDB
 
 /*
  * FIXME the user should be able to select the
  * uart to be used for debugging.
  */
-#define	DEBUG_BASE  UART2_ADDR
+#define DEBUG_BASE  UART_DEBUG_BASE
 /**/
 
 /* we need uint32 uint8 */
@@ -53,8 +53,11 @@ typedef         unsigned int  uint32;
 #define UART_MOD_CNTRL	0x100	/* Module Control */
 
 /* memory-mapped read/write of the port */
-#define UART16550_READ(y)    (inl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y,z) (outl(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y)    (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y,z) (au_writel(z&0xff, DEBUG_BASE + y))
+
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern unsigned long cal_r4koff(void);
 
 void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 {
@@ -72,12 +75,12 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 		uint32 divisor;
 
 		/* set divisor */
-		divisor = get_au1000_uart_baud() / baud;
+		divisor = get_au1x00_uart_baud_base() / baud;
 		UART16550_WRITE(UART_CLK, divisor & 0xffff);
 	}
 
 	/* set data format */
-	UART16550_WRITE(UART_LCR, data | parity | stop);
+	UART16550_WRITE(UART_LCR, (data | parity | stop));
 }
 
 static int remoteDebugInitialized = 0;
@@ -99,7 +102,8 @@ uint8 getDebugChar(void)
 
 int putDebugChar(uint8 byte)
 {
-	int i;
+//	int i;
+
 	if (!remoteDebugInitialized) {
 		remoteDebugInitialized = 1;
 		debugInit(UART16550_BAUD_115200,

arch/mips/au1000/common/dma.c

+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      A DMA channel allocator for Au1000. API is modeled loosely off of
+ *      linux/kernel/dma.c.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <asm/au1000.h>
+#include <asm/au1000_dma.h>
+#include <asm/system.h>
+
+
+
+/*
+ * A note on resource allocation:
+ *
+ * All drivers needing DMA channels, should allocate and release them
+ * through the public routines `request_dma()' and `free_dma()'.
+ *
+ * In order to avoid problems, all processes should allocate resources in
+ * the same sequence and release them in the reverse order.
+ *
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
+ * When releasing them, first release the IRQ, then release the DMA. The
+ * main reason for this order is that, if you are requesting the DMA buffer
+ * done interrupt, you won't know the irq number until the DMA channel is
+ * returned from request_dma.
+ */
+
+
+spinlock_t au1000_dma_spin_lock = SPIN_LOCK_UNLOCKED;
+
+struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,},
+      {dev_id:-1,}
+};
+
+// Device FIFO addresses and default DMA modes
+static const struct {
+	unsigned int fifo_addr;
+	unsigned int dma_mode;
+} dma_dev_table[DMA_NUM_DEV] = {
+	{UART0_ADDR + UART_TX, 0},
+	{UART0_ADDR + UART_RX, 0},
+	{0, 0},
+	{0, 0},
+	{AC97C_DATA, DMA_DW16 },          // coherent
+	{AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+	{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
+	{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
+	{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
+	{USBD_EP0WR, DMA_DW8 | DMA_NC},
+	{USBD_EP2WR, DMA_DW8 | DMA_NC},
+	{USBD_EP3WR, DMA_DW8 | DMA_NC},
+	{USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
+	{USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
+	{I2S_DATA, DMA_DW32 | DMA_NC},
+	{I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
+};
+
+
+int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+			 int length, int *eof, void *data)
+{
+	int i, len = 0;
+	struct dma_chan *chan;
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+		if ((chan = get_dma_chan(i)) != NULL) {
+			len += sprintf(buf + len, "%2d: %s\n",
+				       i, chan->dev_str);
+		}
+	}
+
+	if (fpos >= len) {
+		*start = buf;
+		*eof = 1;
+		return 0;
+	}
+	*start = buf + fpos;
+	if ((len -= fpos) > length)
+		return length;
+	*eof = 1;
+	return len;
+}
+
+
+void dump_au1000_dma_channel(unsigned int dmanr)
+{
+	struct dma_chan *chan;
+
+	if (dmanr > NUM_AU1000_DMA_CHANNELS)
+		return;
+	chan = &au1000_dma_table[dmanr];
+
+	printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr);
+	printk(KERN_INFO "  mode = 0x%08x\n",
+	       au_readl(chan->io + DMA_MODE_SET));
+	printk(KERN_INFO "  addr = 0x%08x\n",
+	       au_readl(chan->io + DMA_PERIPHERAL_ADDR));
+	printk(KERN_INFO "  start0 = 0x%08x\n",
+	       au_readl(chan->io + DMA_BUFFER0_START));
+	printk(KERN_INFO "  start1 = 0x%08x\n",
+	       au_readl(chan->io + DMA_BUFFER1_START));
+	printk(KERN_INFO "  count0 = 0x%08x\n",
+	       au_readl(chan->io + DMA_BUFFER0_COUNT));
+	printk(KERN_INFO "  count1 = 0x%08x\n",
+	       au_readl(chan->io + DMA_BUFFER1_COUNT));
+}
+
+
+/*
+ * Finds a free channel, and binds the requested device to it.
+ * Returns the allocated channel number, or negative on error.
+ * Requests the DMA done IRQ if irqhandler != NULL.
+ */
+int request_au1000_dma(int dev_id, const char *dev_str,
+		       void (*irqhandler)(int, void *, struct pt_regs *),
+		       unsigned long irqflags,
+		       void *irq_dev_id)
+{
+	struct dma_chan *chan;
+	int i, ret;
+
+	if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+		return -EINVAL;
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+		if (au1000_dma_table[i].dev_id < 0)
+			break;
+	}
+	if (i == NUM_AU1000_DMA_CHANNELS)
+		return -ENODEV;
+
+	chan = &au1000_dma_table[i];
+
+	if (irqhandler) {
+		chan->irq = AU1000_DMA_INT_BASE + i;
+		chan->irq_dev = irq_dev_id;
+		if ((ret = request_irq(chan->irq, irqhandler, irqflags,
+				       dev_str, chan->irq_dev))) {
+			chan->irq = 0;
+			chan->irq_dev = NULL;
+			return ret;
+		}
+	} else {
+		chan->irq = 0;
+		chan->irq_dev = NULL;
+	}
+
+	// fill it in
+	chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
+	chan->dev_id = dev_id;
+	chan->dev_str = dev_str;
+	chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
+	chan->mode = dma_dev_table[dev_id].dma_mode;
+
+	/* initialize the channel before returning */
+	init_dma(i);
+
+	return i;
+}
+
+
+void free_au1000_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan) {
+		printk("Trying to free DMA%d\n", dmanr);
+		return;
+	}
+
+	disable_dma(dmanr);
+	if (chan->irq)
+		free_irq(chan->irq, chan->irq_dev);
+
+	chan->irq = 0;
+	chan->irq_dev = NULL;
+	chan->dev_id = -1;
+}

arch/mips/au1000/common/int-handler.S

@@ -9,7 +9,6 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
-#include <linux/config.h>
 #include <asm/asm.h>
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
@@ -65,7 +64,5 @@ NESTED(au1000_IRQ, PT_SIZE, sp)
 
 5:
 	move	a0, sp
-	jal	mips_spurious_interrupt
-done:
-	j	ret_from_irq
+	j	spurious_interrupt
 END(au1000_IRQ)

arch/mips/au1000/common/power.c

+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1000 Power Management routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *		ppopov@mvista.com or source@mvista.com
+ *
+ *  Some of the routines are right out of init/main.c, whose
+ *  copyrights apply here.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+
+#include <asm/string.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/au1000.h>
+
+#define DEBUG 1
+#ifdef DEBUG
+#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __FUNCTION__ , ## args)
+#else
+#  define DPRINTK(fmt, args...)
+#endif
+
+extern void au1k_wait(void);
+static void calibrate_delay(void);
+
+extern void set_au1000_speed(unsigned int new_freq);
+extern unsigned int get_au1000_speed(void);
+extern unsigned long get_au1000_uart_baud_base(void);
+extern void set_au1000_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long save_local_and_disable(int controller);
+extern void restore_local_and_enable(int controller, unsigned long mask);
+extern void local_enable_irq(unsigned int irq_nr);
+
+/* Quick acpi hack. This will have to change! */
+#define	CTL_ACPI 9999
+#define	ACPI_S1_SLP_TYP 19
+#define	ACPI_SLEEP 21
+
+#ifdef CONFIG_PM
+
+static spinlock_t pm_lock = SPIN_LOCK_UNLOCKED;
+
+unsigned long suspend_mode;
+
+void wakeup_from_suspend(void)
+{
+	suspend_mode = 0;
+}
+
+int au_sleep(void)
+{
+	unsigned long wakeup, flags;
+	spin_lock_irqsave(&pm_lock,flags);
+
+	flush_cache_all();
+	/* pin 6 is gpio */
+	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
+
+	/* gpio 6 can cause a wake up event */
+	wakeup = au_readl(SYS_WAKEMSK);
+	wakeup &= ~(1 << 8);	/* turn off match20 wakeup */
+	wakeup |= 1 << 6;	/* turn on gpio 6 wakeup   */
+	au_writel(wakeup, SYS_WAKEMSK);
+
+	au_writel(1, SYS_WAKESRC);	/* clear cause */
+	au_writel(1, SYS_SLPPWR);	/* prepare to sleep */
+
+	__asm__("la $4, 1f\n\t"
+		"lui $5, 0xb190\n\t"
+		"ori $5, 0x18\n\t"
+		"sw $4, 0($5)\n\t"
+		"li $4, 1\n\t"
+		"lui $5, 0xb190\n\t"
+		"ori $5, 0x7c\n\t"
+		"sw $4, 0($5)\n\t" "sync\n\t" "1:\t\n\t" "nop\n\t");
+
+	/* after a wakeup, the cpu vectors back to 0x1fc00000 so
+	 * it's up to the boot code to get us back here.
+	 */
+	spin_unlock_irqrestore(&pm_lock, flags);
+	return 0;
+}
+
+static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
+		       void *buffer, size_t * len)
+{
+	int retval = 0;
+
+	if (!write) {
+		*len = 0;
+	} else {
+		retval = pm_send_all(PM_SUSPEND, (void *) 2);
+		if (retval)
+			return retval;
+
+		au_sleep();
+		retval = pm_send_all(PM_RESUME, (void *) 0);
+	}
+	return retval;
+}
+
+static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
+			 void *buffer, size_t * len)
+{
+	int retval = 0;
+
+	if (!write) {
+		*len = 0;
+	} else {
+		retval = pm_send_all(PM_SUSPEND, (void *) 2);
+		if (retval)
+			return retval;
+		suspend_mode = 1;
+		au1k_wait();
+		retval = pm_send_all(PM_RESUME, (void *) 0);
+	}
+	return retval;
+}
+
+
+static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
+		      void *buffer, size_t * len)
+{
+	int retval = 0, i;
+	unsigned long val, pll;
+#define TMPBUFLEN 64
+#define MAX_CPU_FREQ 396
+	char buf[8], *p;
+	unsigned long flags, intc0_mask, intc1_mask;
+	unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
+	    old_refresh;
+	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	if (!write) {
+		*len = 0;
+	} else {
+		/* Parse the new frequency */
+		if (*len > TMPBUFLEN - 1) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+		if (copy_from_user(buf, buffer, *len)) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+		buf[*len] = 0;
+		p = buf;
+		val = simple_strtoul(p, &p, 0);
+		if (val > MAX_CPU_FREQ) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+
+		pll = val / 12;
+		if ((pll > 33) || (pll < 7)) {	/* 396 MHz max, 84 MHz min */
+			/* revisit this for higher speed cpus */
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+
+		old_baud_base = get_au1000_uart_baud_base();
+		old_cpu_freq = get_au1000_speed();
+
+		new_cpu_freq = pll * 12 * 1000000;
+		new_baud_base = (new_cpu_freq / 4) / 16;
+		set_au1000_speed(new_cpu_freq);
+		set_au1000_uart_baud_base(new_baud_base);
+
+		old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
+		new_refresh =
+		    ((old_refresh * new_cpu_freq) /
+		     old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+
+		au_writel(pll, SYS_CPUPLL);
+		au_sync_delay(1);
+		au_writel(new_refresh, MEM_SDREFCFG);
+		au_sync_delay(1);
+
+		for (i = 0; i < 4; i++) {
+			if (au_readl
+			    (UART_BASE + UART_MOD_CNTRL +
+			     i * 0x00100000) == 3) {
+				old_clk =
+				    au_readl(UART_BASE + UART_CLK +
+					  i * 0x00100000);
+				// baud_rate = baud_base/clk
+				baud_rate = old_baud_base / old_clk;
+				/* we won't get an exact baud rate and the error
+				 * could be significant enough that our new
+				 * calculation will result in a clock that will
+				 * give us a baud rate that's too far off from
+				 * what we really want.
+				 */
+				if (baud_rate > 100000)
+					baud_rate = 115200;
+				else if (baud_rate > 50000)
+					baud_rate = 57600;
+				else if (baud_rate > 30000)
+					baud_rate = 38400;
+				else if (baud_rate > 17000)
+					baud_rate = 19200;
+				else
+					(baud_rate = 9600);
+				// new_clk = new_baud_base/baud_rate
+				new_clk = new_baud_base / baud_rate;
+				au_writel(new_clk,
+				       UART_BASE + UART_CLK +
+				       i * 0x00100000);
+				au_sync_delay(10);
+			}
+		}
+	}
+
+
+	/* We don't want _any_ interrupts other than
+	 * match20. Otherwise our calibrate_delay()
+	 * calculation will be off, potentially a lot.
+	 */
+	intc0_mask = save_local_and_disable(0);
+	intc1_mask = save_local_and_disable(1);
+	local_enable_irq(AU1000_TOY_MATCH2_INT);
+	spin_unlock_irqrestore(&pm_lock, flags);
+	calibrate_delay();
+	restore_local_and_enable(0, intc0_mask);
+	restore_local_and_enable(1, intc1_mask);
+	return retval;
+}
+
+
+static struct ctl_table pm_table[] = {
+	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
+	{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
+	{CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
+	{0}
+};
+
+static struct ctl_table pm_dir_table[] = {
+	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
+	{0}
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init pm_init(void)
+{
+	register_sysctl_table(pm_dir_table, 1);
+	return 0;
+}
+
+__initcall(pm_init);
+
+
+/*
+ * This is right out of init/main.c
+ */
+
+/* This is the number of bits of precision for the loops_per_jiffy.  Each
+   bit takes on average 1.5/HZ seconds.  This (like the original) is a little
+   better than 1% */
+#define LPS_PREC 8
+
+static void calibrate_delay(void)
+{
+	unsigned long ticks, loopbit;
+	int lps_precision = LPS_PREC;
+
+	loops_per_jiffy = (1 << 12);
+
+	while (loops_per_jiffy <<= 1) {
+		/* wait for "start of" clock tick */
+		ticks = jiffies;
+		while (ticks == jiffies)
+			/* nothing */ ;
+		/* Go .. */
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		ticks = jiffies - ticks;
+		if (ticks)
+			break;
+	}
+
+/* Do a binary approximation to get loops_per_jiffy set to equal one clock
+   (up to lps_precision bits) */
+	loops_per_jiffy >>= 1;
+	loopbit = loops_per_jiffy;
+	while (lps_precision-- && (loopbit >>= 1)) {
+		loops_per_jiffy |= loopbit;
+		ticks = jiffies;
+		while (ticks == jiffies);
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		if (jiffies != ticks)	/* longer than 1 tick */
+			loops_per_jiffy &= ~loopbit;
+	}
+}
+
+void au1k_wait(void)
+{
+	__asm__("nop\n\t" "nop\n\t");
+}
+
+#endif				/* CONFIG_PM */

arch/mips/au1000/common/prom.c

@@ -4,7 +4,7 @@
  *    PROM library initialisation code, assuming a version of
  *    pmon is the boot code.
  *
- * Copyright 2000 MontaVista Software Inc.
+ * Copyright 2000,2001 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *         	ppopov@mvista.com or source@mvista.com
  *
@@ -35,7 +35,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/config.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
@@ -44,22 +44,23 @@
 
 /* #define DEBUG_CMDLINE */
 
-char arcs_cmdline[COMMAND_LINE_SIZE];
-int prom_argc;
-char **prom_argv, **prom_envp;
+char arcs_cmdline[CL_SIZE];
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
 
-typedef struct {
+typedef struct
+{
     char *name;
 /*    char *val; */
-} t_env_var;
+}t_env_var;
 
 
-char * __init prom_getcmdline(void)
+char * prom_getcmdline(void)
 {
 	return &(arcs_cmdline[0]);
 }
 
-void  __init prom_init_cmdline(void)
+void  prom_init_cmdline(void)
 {
 	char *cp;
 	int actr;
@@ -101,20 +102,57 @@ char *prom_getenv(char *envname)
 	return(NULL);
 }
 
-static inline unsigned char str2hexnum(unsigned char c)
+inline unsigned char str2hexnum(unsigned char c)
 {
 	if(c >= '0' && c <= '9')
 		return c - '0';
 	if(c >= 'a' && c <= 'f')
 		return c - 'a' + 10;
+	if(c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
 	return 0; /* foo */
 }
 
-int __init page_is_ram(unsigned long pagenr)
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
 {
-	return 1;
+	int i;
+
+	for(i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if((*str == '.') || (*str == ':'))
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
 }
 
-void prom_free_prom_memory (void)
+int get_ethernet_addr(char *ethernet_addr)
 {
+        char *ethaddr_str;
+
+        ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+	        printk("ethaddr not set in boot prom\n");
+		return -1;
+	}
+	str2eaddr(ethernet_addr, ethaddr_str);
+
+#if 0
+	{
+		int i;
+
+	printk("get_ethernet_addr: ");
+	for (i=0; i<5; i++)
+		printk("%02x:", (unsigned char)*(ethernet_addr+i));
+	printk("%02x\n", *(ethernet_addr+i));
+	}
+#endif
+
+	return 0;
 }
+
+void prom_free_prom_memory (void) {}
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);

arch/mips/au1000/common/puts.c

@@ -29,8 +29,9 @@
  */
 
 #include <linux/types.h>
+#include <asm/au1000.h>
 
-#define SERIAL_BASE   0xB1100000 /* au1000, uart 0 */
+#define SERIAL_BASE   UART_BASE
 #define SER_CMD       0x7
 #define SER_DATA      0x1
 #define TX_BUSY       0x20

arch/mips/au1000/common/reset.c

@@ -27,7 +27,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
+#include <linux/config.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <asm/io.h>
@@ -35,23 +35,107 @@
 #include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/system.h>
+#include <asm/au1000.h>
+
+extern int au_sleep(void);
 
 void au1000_restart(char *command)
 {
-	set_cp0_status(ST0_BEV | ST0_ERL);
-	set_cp0_config(CONF_CM_UNCACHED);
+	/* Set all integrated peripherals to disabled states */
+	u32 prid = read_c0_prid();
+
+	printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
+	switch (prid & 0xFF000000)
+	{
+	case 0x00000000: /* Au1000 */
+		au_writel(0x02, 0xb0000010); /* ac97_enable */
+		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+		asm("sync");
+		au_writel(0x00, 0xb017fffc); /* usbh_enable */
+		au_writel(0x00, 0xb0200058); /* usbd_enable */
+		au_writel(0x00, 0xb0300040); /* ir_enable */
+		au_writel(0x00, 0xb0520000); /* macen0 */
+		au_writel(0x00, 0xb0520004); /* macen1 */
+		au_writel(0x00, 0xb1000008); /* i2s_enable  */
+		au_writel(0x00, 0xb1100100); /* uart0_enable */
+		au_writel(0x00, 0xb1200100); /* uart1_enable */
+		au_writel(0x00, 0xb1300100); /* uart2_enable */
+		au_writel(0x00, 0xb1400100); /* uart3_enable */
+		au_writel(0x02, 0xb1600100); /* ssi0_enable */
+		au_writel(0x02, 0xb1680100); /* ssi1_enable */
+		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+		au_writel(0x00, 0xb1900028); /* sys_clksrc */
+		au_writel(0x00, 0xb1900100); /* sys_pininputen */
+		break;
+	case 0x01000000: /* Au1500 */
+		au_writel(0x02, 0xb0000010); /* ac97_enable */
+		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+		asm("sync");
+		au_writel(0x00, 0xb017fffc); /* usbh_enable */
+		au_writel(0x00, 0xb0200058); /* usbd_enable */
+		au_writel(0x00, 0xb1520000); /* macen0 */
+		au_writel(0x00, 0xb1520004); /* macen1 */
+		au_writel(0x00, 0xb1100100); /* uart0_enable */
+		au_writel(0x00, 0xb1400100); /* uart3_enable */
+		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+		au_writel(0x00, 0xb1900028); /* sys_clksrc */
+		au_writel(0x00, 0xb1900100); /* sys_pininputen */
+		break;
+	case 0x02000000: /* Au1100 */
+		au_writel(0x02, 0xb0000010); /* ac97_enable */
+		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+		asm("sync");
+		au_writel(0x00, 0xb017fffc); /* usbh_enable */
+		au_writel(0x00, 0xb0200058); /* usbd_enable */
+		au_writel(0x00, 0xb0300040); /* ir_enable */
+		au_writel(0x00, 0xb0520000); /* macen0 */
+		au_writel(0x00, 0xb1000008); /* i2s_enable  */
+		au_writel(0x00, 0xb1100100); /* uart0_enable */
+		au_writel(0x00, 0xb1200100); /* uart1_enable */
+		au_writel(0x00, 0xb1400100); /* uart3_enable */
+		au_writel(0x02, 0xb1600100); /* ssi0_enable */
+		au_writel(0x02, 0xb1680100); /* ssi1_enable */
+		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+		au_writel(0x00, 0xb1900028); /* sys_clksrc */
+		au_writel(0x00, 0xb1900100); /* sys_pininputen */
+		break;
+
+	default:
+		break;
+	}
+
+	set_c0_status(ST0_BEV | ST0_ERL);
+	set_c0_config(CONF_CM_UNCACHED);
 	flush_cache_all();
-	write_32bit_cp0_register(CP0_WIRED, 0);
+	write_c0_wired(0);
+
+#if defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
+	/* Do a HW reset if the board can do it */
+
+	au_writel(0x00000000, 0xAE00001C);
+#endif
+
 	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
 }
 
 void au1000_halt(void)
 {
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+#ifdef CONFIG_PM
+	au_sleep();
+
+	/* should not get here */
+	printk(KERN_ERR "Unable to put cpu in sleep mode\n");
+	while(1);
+#else
 	while (1)
 		__asm__(".set\tmips3\n\t"
 	                "wait\n\t"
 			".set\tmips0");
+#endif
 }
 
 void au1000_power_off(void)

arch/mips/au1000/common/rtc.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * RTC routines for PC style attached Dallas chip.
+ *
+ * Copyright (C) 1998, 2001 by Ralf Baechle
+ */
+#include <linux/mc146818rtc.h>
+#include <asm/io.h>
+#include <asm/au1000.h>
+
+#define PB1500_RTC_ADDR 0xAC000000
+
+unsigned char std_rtc_read_data(unsigned long offset)
+{
+	offset <<= 2;
+	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static void std_rtc_write_data(unsigned char data, unsigned long offset)
+{
+	offset <<= 2;
+	au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+static int std_rtc_bcd_mode(void)
+{
+	return 1;
+}
+
+struct rtc_ops pb1500_rtc_ops = {
+	&std_rtc_read_data,
+	&std_rtc_write_data,
+	&std_rtc_bcd_mode
+};

arch/mips/au1000/db1x00/Makefile

+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor PB1000 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+.S.s:
+	$(CPP) $(CFLAGS) $< -o $*.s
+.S.o:
+	$(CC) $(CFLAGS) -c $< -o $*.o
+
+O_TARGET := db1x00.o
+
+obj-y := init.o setup.o

arch/mips/au1000/db1x00/init.c

+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	PB1000 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Db1000";
+}
+
+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = argc;
+	prom_argv = argv;
+	prom_envp = envp;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_DB1000;	/* set the platform # */   
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x04000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+	return 0;
+}

arch/mips/au1000/pb1000/Makefile

@@ -5,5 +5,13 @@
 #
 # Makefile for the Alchemy Semiconductor PB1000 board.
 #
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+USE_STANDARD_AS_RULE := true
+
+O_TARGET := pb1000.o
 
 obj-y := init.o setup.o

arch/mips/au1000/pb1000/init.c

@@ -33,17 +33,25 @@
 #include <linux/bootmem.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <linux/config.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 
-extern int prom_argc;
-extern char **prom_argv, **prom_envp;
+int prom_argc;
+char **prom_argv, **prom_envp;
 extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1000";
+}
 
 int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
 {
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
 	prom_argc = argc;
 	prom_argv = argv;
 	prom_envp = envp;
@@ -52,8 +60,12 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
 	mips_machtype = MACH_PB1000;
 
 	prom_init_cmdline();
-
-	add_memory_region(1, 64 << 20, BOOT_MEM_RAM);
-
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x04000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
 	return 0;
 }

arch/mips/au1000/pb1100/Makefile

+#
+#  Copyright 2000,2001 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor Pb1100 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+USE_STANDARD_AS_RULE := true
+
+O_TARGET := pb1100.o
+
+obj-y := init.o setup.o

arch/mips/au1000/pb1100/init.c

+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Pb1100 board setup
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1100";
+}
+
+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = argc;
+	prom_argv = argv;
+	prom_envp = envp;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_PB1100;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x04000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+	return 0;
+}

arch/mips/au1000/pb1500/Makefile

+#
+#  Copyright 2000,2001 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor Pb1500 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+lib-y := init.o setup.o

include/asm-mips/pb1500.h

+/*
+ * Alchemy Semi PB1500 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+
+#define IDENT_BOARD_REG           0xAE000000
+#define BOARD_STATUS_REG          0xAE000004
+#define PCI_BOARD_REG             0xAE000010
+#define PCMCIA_BOARD_REG          0xAE000010
+  #define PC_DEASSERT_RST               0x80
+  #define PC_DRV_EN                     0x10 
+#define PB1500_G_CONTROL          0xAE000014
+#define PB1500_RST_VDDI           0xAE00001C
+#define PB1500_LEDS               0xAE000018
+  
+#define PB1500_HEX_LED            0xAF000004
+#define PB1500_HEX_LED_BLANK      0xAF000008
+
+/* PCMCIA PB1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1500_H */