Documentation: kernel-parameters: sort all "no..." parameters

Sort all of the "no..." kernel parameters into the correct order
as specified in kernel-parameters.rst: "into English Dictionary order
(defined as ignoring all punctuation and sorting digits before letters
in a case insensitive manner)".

No other changes here, just movement of lines.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230317002635.16540-1-rdunlap@infradead.orgSigned-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/admin-guide/kernel-parameters.txt

@@ -929,9 +929,6 @@
 
 	debug_objects	[KNL] Enable object debugging
 
-	no_debug_objects
-			[KNL] Disable object debugging
-
 	debug_guardpage_minorder=
 			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
 			parameter allows control of the order of pages that will
@@ -3579,7 +3576,21 @@
 	no5lvl		[X86-64] Disable 5-level paging mode. Forces
 			kernel to use 4-level paging instead.
 
-	nofsgsbase	[X86] Disables FSGSBASE instructions.
+	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
+			caches in the slab allocator.  Saves per-node memory,
+			but will impact performance.
+
+	noalign		[KNL,ARM]
+
+	noaltinstr	[S390] Disables alternative instructions patching
+			(CPU alternatives feature).
+
+	noapic		[SMP,APIC] Tells the kernel to not make use of any
+			IOAPICs that may be present in the system.
+
+	noautogroup	Disable scheduler automatic task group creation.
+
+	nocache		[ARM]
 
 	no_console_suspend
 			[HW] Never suspend the console
@@ -3596,32 +3607,8 @@
 			/sys/module/printk/parameters/console_suspend) to
 			turn on/off it dynamically.
 
-	novmcoredd	[KNL,KDUMP]
-			Disable device dump. Device dump allows drivers to
-			append dump data to vmcore so you can collect driver
-			specified debug info.  Drivers can append the data
-			without any limit and this data is stored in memory,
-			so this may cause significant memory stress.  Disabling
-			device dump can help save memory but the driver debug
-			data will be no longer available.  This parameter
-			is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
-			is set.
-
-	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
-			caches in the slab allocator.  Saves per-node memory,
-			but will impact performance.
-
-	noalign		[KNL,ARM]
-
-	noaltinstr	[S390] Disables alternative instructions patching
-			(CPU alternatives feature).
-
-	noapic		[SMP,APIC] Tells the kernel to not make use of any
-			IOAPICs that may be present in the system.
-
-	noautogroup	Disable scheduler automatic task group creation.
-
-	nocache		[ARM]
+	no_debug_objects
+			[KNL] Disable object debugging
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
@@ -3631,14 +3618,6 @@
 
 	noexec		[IA-64]
 
-	nosmap		[PPC]
-			Disable SMAP (Supervisor Mode Access Prevention)
-			even if it is supported by processor.
-
-	nosmep		[PPC64s]
-			Disable SMEP (Supervisor Mode Execution Prevention)
-			even if it is supported by processor.
-
 	noexec32	[X86-64]
 			This affects only 32-bit executables.
 			noexec32=on: enable non-executable mappings (default)
@@ -3646,74 +3625,18 @@
 			noexec32=off: disable non-executable mappings
 				read implies executable mappings
 
+	no_file_caps	Tells the kernel not to honor file capabilities.  The
+			only way then for a file to be executed with privilege
+			is to be setuid root or executed by root.
+
 	nofpu		[MIPS,SH] Disable hardware FPU at boot time.
 
+	nofsgsbase	[X86] Disables FSGSBASE instructions.
+
 	nofxsr		[BUGS=X86-32] Disables x86 floating point extended
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
-	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
-
-	nohugevmalloc	[KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
-
-	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
-			Equivalent to smt=1.
-
-			[KNL,X86] Disable symmetric multithreading (SMT).
-			nosmt=force: Force disable SMT, cannot be undone
-				     via the sysfs control file.
-
-	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
-			(bounds check bypass). With this option data leaks are
-			possible in the system.
-
-	nospectre_v2	[X86,PPC_E500,ARM64] Disable all mitigations for
-			the Spectre variant 2 (indirect branch prediction)
-			vulnerability. System may allow data leaks with this
-			option.
-
-	nospectre_bhb	[ARM64] Disable all mitigations for Spectre-BHB (branch
-			history injection) vulnerability. System may allow data leaks
-			with this option.
-
-	nospec_store_bypass_disable
-			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
-
-	no_uaccess_flush
-	                [PPC] Don't flush the L1-D cache after accessing user data.
-
-	noxsave		[BUGS=X86] Disables x86 extended register state save
-			and restore using xsave. The kernel will fallback to
-			enabling legacy floating-point and sse state.
-
-	noxsaveopt	[X86] Disables xsaveopt used in saving x86 extended
-			register states. The kernel will fall back to use
-			xsave to save the states. By using this parameter,
-			performance of saving the states is degraded because
-			xsave doesn't support modified optimization while
-			xsaveopt supports it on xsaveopt enabled systems.
-
-	noxsaves	[X86] Disables xsaves and xrstors used in saving and
-			restoring x86 extended register state in compacted
-			form of xsave area. The kernel will fall back to use
-			xsaveopt and xrstor to save and restore the states
-			in standard form of xsave area. By using this
-			parameter, xsave area per process might occupy more
-			memory on xsaves enabled systems.
-
-	nohlt		[ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
-			in do_idle() and not use the arch_cpu_idle()
-			implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
-			to be effective. This is useful on platforms where the
-			sleep(SH) or wfi(ARM,ARM64) instructions do not work
-			correctly or when doing power measurements to evaluate
-			the impact of the sleep instructions. This is also
-			useful when using JTAG debugger.
-
-	no_file_caps	Tells the kernel not to honor file capabilities.  The
-			only way then for a file to be executed with privilege
-			is to be setuid root or executed by root.
-
 	nohalt		[IA-64] Tells the kernel not to use the power saving
 			function PAL_HALT_LIGHT when idle. This increases
 			power-consumption. On the positive side, it reduces
@@ -3737,6 +3660,19 @@
 
 	nohibernate	[HIBERNATION] Disable hibernation and resume.
 
+	nohlt		[ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
+			in do_idle() and not use the arch_cpu_idle()
+			implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
+			to be effective. This is useful on platforms where the
+			sleep(SH) or wfi(ARM,ARM64) instructions do not work
+			correctly or when doing power measurements to evaluate
+			the impact of the sleep instructions. This is also
+			useful when using JTAG debugger.
+
+	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
+
+	nohugevmalloc	[KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
+
 	nohz=		[KNL] Boottime enable/disable dynamic ticks
 			Valid arguments: on, off
 			Default: on
@@ -3754,16 +3690,6 @@
 			Note that this argument takes precedence over
 			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
 
-	noiotrap	[SH] Disables trapped I/O port accesses.
-
-	noirqdebug	[X86-32] Disables the code which attempts to detect and
-			disable unhandled interrupt sources.
-
-	no_timer_check	[X86,APIC] Disables the code which tests for
-			broken timer IRQ sources.
-
-	noisapnp	[ISAPNP] Disables ISA PnP code.
-
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
@@ -3775,6 +3701,13 @@
 
 	noinvpcid	[X86] Disable the INVPCID cpu feature.
 
+	noiotrap	[SH] Disables trapped I/O port accesses.
+
+	noirqdebug	[X86-32] Disables the code which attempts to detect and
+			disable unhandled interrupt sources.
+
+	noisapnp	[ISAPNP] Disables ISA PnP code.
+
 	nojitter	[IA-64] Disables jitter checking for ITC timers.
 
 	nokaslr		[KNL]
@@ -3782,18 +3715,10 @@
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
-	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
-
 	no-kvmapf	[X86,KVM] Disable paravirtualized asynchronous page
 			fault handling.
 
-	no-vmw-sched-clock
-			[X86,PV_OPS] Disable paravirtualized VMware scheduler
-			clock and use the default one.
-
-	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
-			steal time accounting. steal time is computed, but
-			won't influence scheduler behaviour
+	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
 
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
@@ -3806,10 +3731,6 @@
 	nomfgpt		[X86-32] Disable Multi-Function General Purpose
 			Timer usage (for AMD Geode machines).
 
-	nonmi_ipi	[X86] Disable using NMI IPIs during panic/reboot to
-			shutdown the other cpus.  Instead use the REBOOT_VECTOR
-			irq.
-
 	nomodeset	Disable kernel modesetting. Most systems' firmware
 			sets up a display mode and provides framebuffer memory
 			for output. With nomodeset, DRM and fbdev drivers will
@@ -3822,6 +3743,10 @@
 
 	nomodule	Disable module load
 
+	nonmi_ipi	[X86] Disable using NMI IPIs during panic/reboot to
+			shutdown the other cpus.  Instead use the REBOOT_VECTOR
+			irq.
+
 	nopat		[X86] Disable PAT (page attribute table extension of
 			pagetables) support.
 
@@ -3830,6 +3755,9 @@
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
+	nopti		[X86-64]
+			Equivalent to pti=off
+
 	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
 			Disables the PV optimizations forcing the guest to run
 			as generic guest with no PV drivers. Currently support
@@ -3849,21 +3777,77 @@
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.
 
+	nosbagart	[IA-64]
+
 	no-scroll	[VGA] Disables scrollback.
 			This is required for the Braillex ib80-piezo Braille
 			reader made by F.H. Papenmeier (Germany).
 
-	nosbagart	[IA-64]
-
 	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
 
+	nosmap		[PPC]
+			Disable SMAP (Supervisor Mode Access Prevention)
+			even if it is supported by processor.
+
+	nosmep		[PPC64s]
+			Disable SMEP (Supervisor Mode Execution Prevention)
+			even if it is supported by processor.
+
 	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
 			and disable the IO APIC.  legacy for "maxcpus=0".
 
+	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
+			Equivalent to smt=1.
+
+			[KNL,X86] Disable symmetric multithreading (SMT).
+			nosmt=force: Force disable SMT, cannot be undone
+				     via the sysfs control file.
+
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
+	nospec_store_bypass_disable
+			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
+	nospectre_bhb	[ARM64] Disable all mitigations for Spectre-BHB (branch
+			history injection) vulnerability. System may allow data leaks
+			with this option.
+
+	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
+			(bounds check bypass). With this option data leaks are
+			possible in the system.
+
+	nospectre_v2	[X86,PPC_E500,ARM64] Disable all mitigations for
+			the Spectre variant 2 (indirect branch prediction)
+			vulnerability. System may allow data leaks with this
+			option.
+
+	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
+			steal time accounting. steal time is computed, but
+			won't influence scheduler behaviour
+
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
+	no_timer_check	[X86,APIC] Disables the code which tests for
+			broken timer IRQ sources.
+
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
+	novmcoredd	[KNL,KDUMP]
+			Disable device dump. Device dump allows drivers to
+			append dump data to vmcore so you can collect driver
+			specified debug info.  Drivers can append the data
+			without any limit and this data is stored in memory,
+			so this may cause significant memory stress.  Disabling
+			device dump can help save memory but the driver debug
+			data will be no longer available.  This parameter
+			is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
+			is set.
+
+	no-vmw-sched-clock
+			[X86,PV_OPS] Disable paravirtualized VMware scheduler
+			clock and use the default one.
+
 	nowatchdog	[KNL] Disable both lockup detectors, i.e.
 			soft-lockup and NMI watchdog (hard-lockup).
 
@@ -3875,6 +3859,25 @@
 			LEGACY_XAPIC_DISABLED bit set in the
 			IA32_XAPIC_DISABLE_STATUS MSR.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
+	noxsaveopt	[X86] Disables xsaveopt used in saving x86 extended
+			register states. The kernel will fall back to use
+			xsave to save the states. By using this parameter,
+			performance of saving the states is degraded because
+			xsave doesn't support modified optimization while
+			xsaveopt supports it on xsaveopt enabled systems.
+
+	noxsaves	[X86] Disables xsaves and xrstors used in saving and
+			restoring x86 extended register state in compacted
+			form of xsave area. The kernel will fall back to use
+			xsaveopt and xrstor to save and restore the states
+			in standard form of xsave area. By using this
+			parameter, xsave area per process might occupy more
+			memory on xsaves enabled systems.
+
 	nps_mtm_hs_ctr=	[KNL,ARC]
 			This parameter sets the maximum duration, in
 			cycles, each HW thread of the CTOP can run
@@ -4582,9 +4585,6 @@
 
 			Not specifying this option is equivalent to pti=auto.
 
-	nopti		[X86-64]
-			Equivalent to pti=off
-
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.