Commit a8a47540 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

regulator: qcom_smd: add list_voltage callback

This patch adds support to list_voltage callback, so that consumers
like mmc core, can get information of supported voltage range.

Without this patch there is no way for mmc core to know this voltage range.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org # v4.6
parent 1a695a90
...@@ -140,6 +140,7 @@ static const struct regulator_ops rpm_smps_ldo_ops = { ...@@ -140,6 +140,7 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
.enable = rpm_reg_enable, .enable = rpm_reg_enable,
.disable = rpm_reg_disable, .disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled, .is_enabled = rpm_reg_is_enabled,
.list_voltage = regulator_list_voltage_linear_range,
.get_voltage = rpm_reg_get_voltage, .get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage, .set_voltage = rpm_reg_set_voltage,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment