fix "seperate" typos in comments

s/seperate/separate
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/filesystems/logfs.txt

@@ -59,7 +59,7 @@ Levels
 ------
 
 Garbage collection (GC) may fail if all data is written
-indiscriminately.  One requirement of GC is that data is seperated
+indiscriminately.  One requirement of GC is that data is separated
 roughly according to the distance between the tree root and the data.
 Effectively that means all file data is on level 0, indirect blocks
 are on levels 1, 2, 3 4 or 5 for 1x, 2x, 3x, 4x or 5x indirect blocks,
@@ -67,7 +67,7 @@ respectively.  Inode file data is on level 6 for the inodes and 7-11
 for indirect blocks.
 
 Each segment contains objects of a single level only.  As a result,
-each level requires its own seperate segment to be open for writing.
+each level requires its own separate segment to be open for writing.
 
 Inode File
 ----------
@@ -106,9 +106,9 @@ Vim
 ---
 
 By cleverly predicting the life time of data, it is possible to
-seperate long-living data from short-living data and thereby reduce
+separate long-living data from short-living data and thereby reduce
 the GC overhead later.  Each type of distinc life expectency (vim) can
-have a seperate segment open for writing.  Each (level, vim) tupel can
+have a separate segment open for writing.  Each (level, vim) tupel can
 be open just once.  If an open segment with unknown vim is encountered
 at mount time, it is closed and ignored henceforth.
 

arch/arm/mach-s3c2443/clock.c

@@ -391,7 +391,7 @@ static struct clk clk_hsmmc = {
 
 /* i2s_eplldiv
  *
- * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
  * from the mux that comes after it (cannot merge into one single clock)
 */
 

arch/arm/plat-samsung/include/plat/gpio-core.h

@@ -97,7 +97,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
  * others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of function
+ * registers instead of one, we do not have a separate set of function
  * (samsung_gpiolib_add_4bit2_chips)for each case.
  */
 extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,

drivers/usb/host/ehci-omap.c

@@ -181,7 +181,7 @@ struct ehci_hcd_omap {
 	void __iomem		*ehci_base;
 
 	/* Regulators for USB PHYs.
-	 * Each PHY can have a seperate regulator.
+	 * Each PHY can have a separate regulator.
 	 */
 	struct regulator        *regulator[OMAP3_HS_USB_PORTS];
 };

fs/logfs/dir.c

@@ -12,7 +12,7 @@
  * Atomic dir operations
  *
  * Directory operations are by default not atomic.  Dentries and Inodes are
- * created/removed/altered in seperate operations.  Therefore we need to do
+ * created/removed/altered in separate operations.  Therefore we need to do
  * a small amount of journaling.
  *
  * Create, link, mkdir, mknod and symlink all share the same function to do

fs/logfs/logfs.h

@@ -704,7 +704,7 @@ static inline gc_level_t expand_level(u64 ino, level_t __level)
 	u8 level = (__force u8)__level;
 
 	if (ino == LOGFS_INO_MASTER) {
-		/* ifile has seperate areas */
+		/* ifile has separate areas */
 		level += LOGFS_MAX_LEVELS;
 	}
 	return (__force gc_level_t)level;

fs/logfs/logfs_abi.h

@@ -50,9 +50,9 @@ static inline void check_##type(void)				\
  * 12	- gc recycled blocks, long-lived data
  * 13	- replacement blocks, short-lived data
  *
- * Levels 1-11 are necessary for robust gc operations and help seperate
+ * Levels 1-11 are necessary for robust gc operations and help separate
  * short-lived metadata from longer-lived file data.  In the future,
- * file data should get seperated into several segments based on simple
+ * file data should get separated into several segments based on simple
  * heuristics.  Old data recycled during gc operation is expected to be
  * long-lived.  New data is of uncertain life expectancy.  New data
  * used to replace older blocks in existing files is expected to be
@@ -117,7 +117,7 @@ static inline void check_##type(void)				\
 #define pure_ofs(ofs) (ofs & ~LOGFS_FULLY_POPULATED)
 
 /*
- * LogFS needs to seperate data into levels.  Each level is defined as the
+ * LogFS needs to separate data into levels.  Each level is defined as the
  * maximal possible distance from the master inode (inode of the inode file).
  * Data blocks reside on level 0, 1x indirect block on level 1, etc.
  * Inodes reside on level 6, indirect blocks for the inode file on levels 7-11.
@@ -204,7 +204,7 @@ SIZE_CHECK(logfs_segment_header, LOGFS_SEGMENT_HEADERSIZE);
  * @ds_crc:			crc32 of structure starting with the next field
  * @ds_ifile_levels:		maximum number of levels for ifile
  * @ds_iblock_levels:		maximum number of levels for regular files
- * @ds_data_levels:		number of seperate levels for data
+ * @ds_data_levels:		number of separate levels for data
  * @pad0:			reserved, must be 0
  * @ds_feature_incompat:	incompatible filesystem features
  * @ds_feature_ro_compat:	read-only compatible filesystem features
@@ -456,7 +456,7 @@ enum logfs_vim {
  * @vim:			life expectancy of data
  *
  * "Areas" are segments currently being used for writing.  There is at least
- * one area per GC level.  Several may be used to seperate long-living from
+ * one area per GC level.  Several may be used to separate long-living from
  * short-living data.  If an area with unknown vim is encountered, it can
  * simply be closed.
  * The write buffer immediately follow this header.