Commit a8d4e016 authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Greg Kroah-Hartman

tty/serial: at91: maxburst was missing for dma transfers

Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Cc: <stable@vger.kernel.org> # 3.12 and later
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6befa9d8
...@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) ...@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
config.direction = DMA_MEM_TO_DEV; config.direction = DMA_MEM_TO_DEV;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.dst_addr = port->mapbase + ATMEL_US_THR; config.dst_addr = port->mapbase + ATMEL_US_THR;
config.dst_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_tx, ret = dmaengine_slave_config(atmel_port->chan_tx,
&config); &config);
...@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) ...@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
config.direction = DMA_DEV_TO_MEM; config.direction = DMA_DEV_TO_MEM;
config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.src_addr = port->mapbase + ATMEL_US_RHR; config.src_addr = port->mapbase + ATMEL_US_RHR;
config.src_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_rx, ret = dmaengine_slave_config(atmel_port->chan_rx,
&config); &config);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment