Commit a9633279 authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Ralf Baechle

[MIPS] Alchemy PCI code style cleanup

Fix 15 errors and 4 warnings given by checkpatch.pl:

- space between the asterisk and variable name;

- space after opening and before closing parentheses;

- leading spaces instead of tabs;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- line over 80 characters.

In addition to these changes, also do the following:

- combine the nested 'if' statements into one when possible;

- remove needless parentheses;

- add missing and remove excess spaces between operator and its operands;

- fix printk() format specifiers mismatching the argument types;

- put the function's result type and name/parameters on the same line;

- insert missing and remove excess new lines;

- properly indent multi-line expressions;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first line;

- fix typos, capitalize acronyms, etc. in the comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent c1dcb14e
/*
* BRIEF MODULE DESCRIPTION
* Board specific pci fixups.
* Board specific PCI fixups.
*
* Copyright 2001-2003 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001-2003, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
/*
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 PCI support.
* Alchemy/AMD Au1xx0 PCI support.
*
* Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* Support for all devices (greater than 16) added by David Gathright.
*
......@@ -28,6 +27,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
......@@ -38,7 +38,7 @@
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...)
#endif
......@@ -46,7 +46,6 @@
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
int (*board_pci_idsel)(unsigned int devsel, int assert);
void mod_wired_entry(int entry, unsigned long entrylo0,
......@@ -92,10 +91,9 @@ void __init au1x_pci_cfg_init(void)
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
unsigned int dev_fn, unsigned char where,
u32 * data)
unsigned int dev_fn, unsigned char where, u32 *data)
{
#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
unsigned int device = PCI_SLOT(dev_fn);
unsigned int function = PCI_FUNC(dev_fn);
unsigned long offset, status;
......@@ -114,30 +112,28 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
Au1500_PCI_STATCMD);
au_sync_udelay(1);
/* Allow board vendors to implement their own off-chip idsel.
/*
* Allow board vendors to implement their own off-chip IDSEL.
* If it doesn't succeed, may as well bail out at this point.
*/
if (board_pci_idsel) {
if (board_pci_idsel(device, 1) == 0) {
if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
*data = 0xffffffff;
local_irq_restore(flags);
return -1;
}
}
/* setup the config window */
if (bus->number == 0) {
cfg_base = ((1<<device)<<11);
} else {
cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
}
/* Setup the config window */
if (bus->number == 0)
cfg_base = (1 << device) << 11;
else
cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
/* setup the lower bits of the 36 bit address */
/* Setup the lower bits of the 36-bit address */
offset = (function << 8) | (where & ~0x3);
/* pick up any address that falls below the page mask */
/* Pick up any address that falls below the page mask */
offset |= cfg_base & ~PAGE_MASK;
/* page boundary */
/* Page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
......@@ -153,38 +149,37 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
last_entryLo1 = entryLo1;
}
if (access_type == PCI_ACCESS_WRITE) {
if (access_type == PCI_ACCESS_WRITE)
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
} else {
else
*data = au_readl((int)(pci_cfg_vm->addr + offset));
}
au_sync_udelay(2);
DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
access_type, bus->number, device, where, *data, offset);
/* check master abort */
/* Check master abort */
status = au_readl(Au1500_PCI_STATCMD);
if (status & (1<<29)) {
if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
DBG("Au1x Master Abort\n");
} else if ((status >> 28) & 0xf) {
DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
DBG("PCI ERR detected: device %u, status %lx\n",
device, (status >> 28) & 0xf);
/* clear errors */
/* Clear errors */
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
*data = 0xffffffff;
error = -1;
}
/* Take away the idsel.
*/
if (board_pci_idsel) {
/* Take away the IDSEL. */
if (board_pci_idsel)
(void)board_pci_idsel(device, 0);
}
local_irq_restore(flags);
return error;
......@@ -192,7 +187,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
}
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
int where, u8 * val)
int where, u8 *val)
{
u32 data;
int ret;
......@@ -206,9 +201,8 @@ static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
return ret;
}
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
int where, u16 * val)
int where, u16 *val)
{
u32 data;
int ret;
......@@ -221,7 +215,7 @@ static int read_config_word(struct pci_bus *bus, unsigned int devfn,
}
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
int where, u32 * val)
int where, u32 *val)
{
int ret;
......@@ -229,9 +223,8 @@ static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
return ret;
}
static int
write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
u8 val)
static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
int where, u8 val)
{
u32 data = 0;
......@@ -247,9 +240,8 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
return PCIBIOS_SUCCESSFUL;
}
static int
write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
u16 val)
static int write_config_word(struct pci_bus *bus, unsigned int devfn,
int where, u16 val)
{
u32 data = 0;
......@@ -262,13 +254,11 @@ write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
static int
write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
u32 val)
static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
int where, u32 val)
{
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
return -1;
......@@ -277,18 +267,20 @@ write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
}
static int config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
int where, int size, u32 *val)
{
switch (size) {
case 1: {
u8 _val;
int rc = read_config_byte(bus, devfn, where, &_val);
*val = _val;
return rc;
}
case 2: {
u16 _val;
int rc = read_config_word(bus, devfn, where, &_val);
*val = _val;
return rc;
}
......@@ -310,7 +302,6 @@ static int config_write(struct pci_bus *bus, unsigned int devfn,
}
}
struct pci_ops au1x_pci_ops = {
config_read,
config_write
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment