Commit a979a0ab authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: sja1105: Don't check state->link in phylink_mac_config

It has been pointed out that PHYLINK can call mac_config only to update
the phy_interface_type and without knowing what the AN results are.

Experimentally, when this was observed to happen, state->link was also
unset, and therefore was used as a proxy to ignore this call. However it
is also suggested that state->link is undefined for this callback and
should not be relied upon.

So let the previously-dead codepath for SPEED_UNKNOWN be called, and
update the comment to make sure the MAC's behavior is sane.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f7110b75
...@@ -715,7 +715,13 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, ...@@ -715,7 +715,13 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
switch (speed_mbps) { switch (speed_mbps) {
case SPEED_UNKNOWN: case SPEED_UNKNOWN:
/* No speed update requested */ /* PHYLINK called sja1105_mac_config() to inform us about
* the state->interface, but AN has not completed and the
* speed is not yet valid. UM10944.pdf says that setting
* SJA1105_SPEED_AUTO at runtime disables the port, so that is
* ok for power consumption in case AN will never complete -
* otherwise PHYLINK should come back with a new update.
*/
speed = SJA1105_SPEED_AUTO; speed = SJA1105_SPEED_AUTO;
break; break;
case SPEED_10: case SPEED_10:
...@@ -766,9 +772,6 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port, ...@@ -766,9 +772,6 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port,
{ {
struct sja1105_private *priv = ds->priv; struct sja1105_private *priv = ds->priv;
if (!state->link)
return;
sja1105_adjust_port_config(priv, port, state->speed); sja1105_adjust_port_config(priv, port, state->speed);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment