Commit a99ab50d authored by Stefan Agner's avatar Stefan Agner Committed by Lee Jones

mfd: rn5t618: Add Ricoh RN5T567 PMIC support

The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
the differences are:

+ DCDC4
+ Slightly different output voltage/currents
+ 32kHz Output
- ADC/Charger capabilities
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Reviewed-by: default avatarMarcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 229d641d
* Ricoh RN5T618 PMIC * Ricoh RN5T567/RN5T618 PMIC
Ricoh RN5T618 is a power management IC which integrates 3 step-down Ricoh RN5T567/RN5T618 is a power management IC family which integrates
DCDC converters, 7 low-dropout regulators, a Li-ion battery charger, 3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled a watchdog timer. The RN5T618 provides additionally a Li-ion battery
through a I2C interface. charger, fuel gauge and an ADC. It can be controlled through an I2C
interface.
Required properties: Required properties:
- compatible: should be "ricoh,rn5t618" - compatible: must be one of
"ricoh,rn5t567"
"ricoh,rn5t618"
- reg: the I2C slave address of the device - reg: the I2C slave address of the device
Sub-nodes: Sub-nodes:
- regulators: the node is required if the regulator functionality is - regulators: the node is required if the regulator functionality is
needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1, needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2. (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
The common bindings for each individual regulator can be found in: The common bindings for each individual regulator can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt Documentation/devicetree/bindings/regulator/regulator.txt
......
...@@ -852,13 +852,14 @@ config MFD_RK808 ...@@ -852,13 +852,14 @@ config MFD_RK808
including interrupts, RTC, LDO & DCDC regulators, and onkey. including interrupts, RTC, LDO & DCDC regulators, and onkey.
config MFD_RN5T618 config MFD_RN5T618
tristate "Ricoh RN5T5618 PMIC" tristate "Ricoh RN5T567/618 PMIC"
depends on I2C depends on I2C
depends on OF
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
help help
Say yes here to add support for the Ricoh RN5T618 PMIC. This Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC.
driver provides common support for accessing the device, This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the additional drivers must be enabled in order to use the
functionality of the device. functionality of the device.
......
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
* MFD core driver for Ricoh RN5T618 PMIC * MFD core driver for Ricoh RN5T618 PMIC
* *
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
* Copyright (C) 2016 Toradex AG
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
...@@ -15,6 +16,7 @@ ...@@ -15,6 +16,7 @@
#include <linux/mfd/core.h> #include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h> #include <linux/mfd/rn5t618.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h> #include <linux/regmap.h>
static const struct mfd_cell rn5t618_cells[] = { static const struct mfd_cell rn5t618_cells[] = {
...@@ -59,17 +61,32 @@ static void rn5t618_power_off(void) ...@@ -59,17 +61,32 @@ static void rn5t618_power_off(void)
RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
} }
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
static int rn5t618_i2c_probe(struct i2c_client *i2c, static int rn5t618_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id) const struct i2c_device_id *id)
{ {
const struct of_device_id *of_id;
struct rn5t618 *priv; struct rn5t618 *priv;
int ret; int ret;
of_id = of_match_device(rn5t618_of_match, &i2c->dev);
if (!of_id) {
dev_err(&i2c->dev, "Failed to find matching DT ID\n");
return -EINVAL;
}
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) if (!priv)
return -ENOMEM; return -ENOMEM;
i2c_set_clientdata(i2c, priv); i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config); priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) { if (IS_ERR(priv->regmap)) {
...@@ -105,12 +122,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c) ...@@ -105,12 +122,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
return 0; return 0;
} }
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t618" },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
static const struct i2c_device_id rn5t618_i2c_id[] = { static const struct i2c_device_id rn5t618_i2c_id[] = {
{ } { }
}; };
...@@ -129,5 +140,5 @@ static struct i2c_driver rn5t618_i2c_driver = { ...@@ -129,5 +140,5 @@ static struct i2c_driver rn5t618_i2c_driver = {
module_i2c_driver(rn5t618_i2c_driver); module_i2c_driver(rn5t618_i2c_driver);
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver"); MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
MODULE_LICENSE("GPL v2"); MODULE_LICENSE("GPL v2");
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#define RN5T618_OTPVER 0x01 #define RN5T618_OTPVER 0x01
#define RN5T618_IODAC 0x02 #define RN5T618_IODAC 0x02
#define RN5T618_VINDAC 0x03 #define RN5T618_VINDAC 0x03
#define RN5T618_OUT32KEN 0x05
#define RN5T618_CPUCNT 0x06 #define RN5T618_CPUCNT 0x06
#define RN5T618_PSWR 0x07 #define RN5T618_PSWR 0x07
#define RN5T618_PONHIS 0x09 #define RN5T618_PONHIS 0x09
...@@ -38,6 +39,7 @@ ...@@ -38,6 +39,7 @@
#define RN5T618_DC1_SLOT 0x16 #define RN5T618_DC1_SLOT 0x16
#define RN5T618_DC2_SLOT 0x17 #define RN5T618_DC2_SLOT 0x17
#define RN5T618_DC3_SLOT 0x18 #define RN5T618_DC3_SLOT 0x18
#define RN5T618_DC4_SLOT 0x19
#define RN5T618_LDO1_SLOT 0x1b #define RN5T618_LDO1_SLOT 0x1b
#define RN5T618_LDO2_SLOT 0x1c #define RN5T618_LDO2_SLOT 0x1c
#define RN5T618_LDO3_SLOT 0x1d #define RN5T618_LDO3_SLOT 0x1d
...@@ -54,12 +56,16 @@ ...@@ -54,12 +56,16 @@
#define RN5T618_DC2CTL2 0x2f #define RN5T618_DC2CTL2 0x2f
#define RN5T618_DC3CTL 0x30 #define RN5T618_DC3CTL 0x30
#define RN5T618_DC3CTL2 0x31 #define RN5T618_DC3CTL2 0x31
#define RN5T618_DC4CTL 0x32
#define RN5T618_DC4CTL2 0x33
#define RN5T618_DC1DAC 0x36 #define RN5T618_DC1DAC 0x36
#define RN5T618_DC2DAC 0x37 #define RN5T618_DC2DAC 0x37
#define RN5T618_DC3DAC 0x38 #define RN5T618_DC3DAC 0x38
#define RN5T618_DC4DAC 0x39
#define RN5T618_DC1DAC_SLP 0x3b #define RN5T618_DC1DAC_SLP 0x3b
#define RN5T618_DC2DAC_SLP 0x3c #define RN5T618_DC2DAC_SLP 0x3c
#define RN5T618_DC3DAC_SLP 0x3d #define RN5T618_DC3DAC_SLP 0x3d
#define RN5T618_DC4DAC_SLP 0x3e
#define RN5T618_DCIREN 0x40 #define RN5T618_DCIREN 0x40
#define RN5T618_DCIRQ 0x41 #define RN5T618_DCIRQ 0x41
#define RN5T618_DCIRMON 0x42 #define RN5T618_DCIRMON 0x42
...@@ -221,8 +227,14 @@ enum { ...@@ -221,8 +227,14 @@ enum {
RN5T618_REG_NUM, RN5T618_REG_NUM,
}; };
enum {
RN5T567 = 0,
RN5T618,
};
struct rn5t618 { struct rn5t618 {
struct regmap *regmap; struct regmap *regmap;
long variant;
}; };
#endif /* __LINUX_MFD_RN5T618_H */ #endif /* __LINUX_MFD_RN5T618_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment