Skip to content

L
linux
Commit aa12693e authored by Tim Harvey's avatar Tim Harvey Committed by Shawn Guo
Browse files
Options

ARM: dts: imx: ventana: add ADV1780 analog video decoder 

Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
Signed-off-by: default avatarTim Harvey <tharvey@gateworks.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 84338d91
Hide whitespace changes
Inline Side-by-side
Showing with 456 additions and 0 deletions
arch/arm/boot/dts/imx6dl-gw52xx.dts
View file @ aa12693e
...@@ -17,3 +17,61 @@ / { ...@@ -17,3 +17,61 @@ / {
model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX"; model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu1_csi1_mux: endpoint {
remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu1_csi1_from_ipu1_csi1_mux {
bus-width = <8>;
};
&ipu1_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
bus-width = <8>;
};
&ipu1_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi1>;
};
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu1_csi1: ipu1_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6dl-gw53xx.dts
View file @ aa12693e
...@@ -17,3 +17,61 @@ / { ...@@ -17,3 +17,61 @@ / {
model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX"; model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu1_csi1_mux: endpoint {
remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu1_csi1_from_ipu1_csi1_mux {
bus-width = <8>;
};
&ipu1_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
bus-width = <8>;
};
&ipu1_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi1>;
};
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu1_csi1: ipu1_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6dl-gw54xx.dts
View file @ aa12693e
...@@ -17,3 +17,61 @@ / { ...@@ -17,3 +17,61 @@ / {
model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX"; model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu1_csi1_mux: endpoint {
remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu1_csi1_from_ipu1_csi1_mux {
bus-width = <8>;
};
&ipu1_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
bus-width = <8>;
};
&ipu1_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi1>;
};
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu1_csi1: ipu1_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6q-gw52xx.dts
View file @ aa12693e
...@@ -18,6 +18,64 @@ / { ...@@ -18,6 +18,64 @@ / {
compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu2_csi1_mux: endpoint {
remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu2_csi1_from_ipu2_csi1_mux {
bus-width = <8>;
};
&ipu2_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
bus-width = <8>;
};
&ipu2_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu2_csi1>;
};
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu2_csi1: ipu2_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
>;
};
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
arch/arm/boot/dts/imx6q-gw53xx.dts
View file @ aa12693e
...@@ -18,6 +18,64 @@ / { ...@@ -18,6 +18,64 @@ / {
compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu2_csi1_mux: endpoint {
remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu2_csi1_from_ipu2_csi1_mux {
bus-width = <8>;
};
&ipu2_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
bus-width = <8>;
};
&ipu2_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu2_csi1>;
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu2_csi1: ipu2_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6q-gw54xx.dts
View file @ aa12693e
...@@ -18,6 +18,64 @@ / { ...@@ -18,6 +18,64 @@ / {
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
}; };
&i2c3 {
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu2_csi1_mux: endpoint {
remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu2_csi1_from_ipu2_csi1_mux {
bus-width = <8>;
};
&ipu2_csi1_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
bus-width = <8>;
};
&ipu2_csi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu2_csi1>;
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
&iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
>;
};
pinctrl_ipu2_csi1: ipu2_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ aa12693e
...@@ -231,6 +231,37 @@ &i2c3 { ...@@ -231,6 +231,37 @@ &i2c3 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>; pinctrl-0 = <&pinctrl_i2c3>;
status = "okay"; status = "okay";
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio5>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu1_csi0_mux: endpoint {
remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu1_csi0_from_ipu1_csi0_mux {
bus-width = <8>;
};
&ipu1_csi0_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
bus-width = <8>;
};
&ipu1_csi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi0>;
}; };
&pcie { &pcie {
...@@ -302,6 +333,13 @@ &wdog1 { ...@@ -302,6 +333,13 @@ &wdog1 {
&iomuxc { &iomuxc {
imx6qdl-gw51xx { imx6qdl-gw51xx {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
>;
};
pinctrl_enet: enetgrp { pinctrl_enet: enetgrp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
...@@ -372,6 +410,22 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ...@@ -372,6 +410,22 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>; >;
}; };
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
>;
};
pinctrl_pcie: pciegrp { pinctrl_pcie: pciegrp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
......
arch/arm/boot/dts/imx6qdl-gw553x.dtsi
View file @ aa12693e
...@@ -261,6 +261,37 @@ &i2c3 { ...@@ -261,6 +261,37 @@ &i2c3 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>; pinctrl-0 = <&pinctrl_i2c3>;
status = "okay"; status = "okay";
adv7180: camera@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adv7180>;
reg = <0x20>;
powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio5>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
port {
adv7180_to_ipu1_csi0_mux: endpoint {
remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
bus-width = <8>;
};
};
};
};
&ipu1_csi0_from_ipu1_csi0_mux {
bus-width = <8>;
};
&ipu1_csi0_mux_from_parallel_sensor {
remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
bus-width = <8>;
};
&ipu1_csi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi0>;
}; };
&pcie { &pcie {
...@@ -340,6 +371,13 @@ &wdog1 { ...@@ -340,6 +371,13 @@ &wdog1 {
}; };
&iomuxc { &iomuxc {
pinctrl_adv7180: adv7180grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
>;
};
pinctrl_gpmi_nand: gpminandgrp { pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
...@@ -387,6 +425,22 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ...@@ -387,6 +425,22 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>; >;
}; };
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
>;
};
pinctrl_gpio_leds: gpioledsgrp { pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7