Merge branch 's390-qeth-updates-2020-11-17'

Julian Wiedmann says:

====================
s390/qeth: updates 2020-11-17

This brings some cleanups, and a bunch of improvements for our
.get_link_ksettings() code.
====================

Link: https://lore.kernel.org/r/20201117161520.1089-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/s390/net/qeth_core.h

@@ -701,6 +701,19 @@ enum qeth_pnso_mode {
 	QETH_PNSO_ADDR_INFO,
 };
 
+enum qeth_link_mode {
+	QETH_LINK_MODE_UNKNOWN,
+	QETH_LINK_MODE_FIBRE_SHORT,
+	QETH_LINK_MODE_FIBRE_LONG,
+};
+
+struct qeth_link_info {
+	u32 speed;
+	u8 duplex;
+	u8 port;
+	enum qeth_link_mode link_mode;
+};
+
 #define QETH_BROADCAST_WITH_ECHO    0x01
 #define QETH_BROADCAST_WITHOUT_ECHO 0x02
 struct qeth_card_info {
@@ -732,6 +745,7 @@ struct qeth_card_info {
 	struct qeth_card_blkt blkt;
 	__u32 diagass_support;
 	__u32 hwtrap;
+	struct qeth_link_info link_info;
 };
 
 enum qeth_discipline_id {
@@ -796,12 +810,6 @@ struct qeth_rx {
 	u8 bufs_refill;
 };
 
-struct carrier_info {
-	__u8  card_type;
-	__u16 port_mode;
-	__u32 port_speed;
-};
-
 struct qeth_switch_info {
 	__u32 capabilities;
 	__u32 settings;
@@ -1108,7 +1116,7 @@ void qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
 int qeth_query_switch_attributes(struct qeth_card *card,
 				  struct qeth_switch_info *sw_info);
 int qeth_query_card_info(struct qeth_card *card,
-			 struct carrier_info *carrier_info);
+			 struct qeth_link_info *link_info);
 int qeth_setadpparms_set_access_ctrl(struct qeth_card *card,
 				     enum qeth_ipa_isolation_modes mode);
 

drivers/s390/net/qeth_core_main.c

@@ -4868,8 +4868,8 @@ static int qeth_query_oat_command(struct qeth_card *card, char __user *udata)
 static int qeth_query_card_info_cb(struct qeth_card *card,
 				   struct qeth_reply *reply, unsigned long data)
 {
-	struct carrier_info *carrier_info = (struct carrier_info *)reply->param;
 	struct qeth_ipa_cmd *cmd = (struct qeth_ipa_cmd *)data;
+	struct qeth_link_info *link_info = reply->param;
 	struct qeth_query_card_info *card_info;
 
 	QETH_CARD_TEXT(card, 2, "qcrdincb");
@@ -4877,14 +4877,67 @@ static int qeth_query_card_info_cb(struct qeth_card *card,
 		return -EIO;
 
 	card_info = &cmd->data.setadapterparms.data.card_info;
-	carrier_info->card_type = card_info->card_type;
-	carrier_info->port_mode = card_info->port_mode;
-	carrier_info->port_speed = card_info->port_speed;
+	netdev_dbg(card->dev,
+		   "card info: card_type=0x%02x, port_mode=0x%04x, port_speed=0x%08x\n",
+		   card_info->card_type, card_info->port_mode,
+		   card_info->port_speed);
+
+	switch (card_info->port_mode) {
+	case CARD_INFO_PORTM_FULLDUPLEX:
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case CARD_INFO_PORTM_HALFDUPLEX:
+		link_info->duplex = DUPLEX_HALF;
+		break;
+	default:
+		link_info->duplex = DUPLEX_UNKNOWN;
+	}
+
+	switch (card_info->card_type) {
+	case CARD_INFO_TYPE_1G_COPPER_A:
+	case CARD_INFO_TYPE_1G_COPPER_B:
+		link_info->speed = SPEED_1000;
+		link_info->port = PORT_TP;
+		break;
+	case CARD_INFO_TYPE_1G_FIBRE_A:
+	case CARD_INFO_TYPE_1G_FIBRE_B:
+		link_info->speed = SPEED_1000;
+		link_info->port = PORT_FIBRE;
+		break;
+	case CARD_INFO_TYPE_10G_FIBRE_A:
+	case CARD_INFO_TYPE_10G_FIBRE_B:
+		link_info->speed = SPEED_10000;
+		link_info->port = PORT_FIBRE;
+		break;
+	default:
+		switch (card_info->port_speed) {
+		case CARD_INFO_PORTS_10M:
+			link_info->speed = SPEED_10;
+			break;
+		case CARD_INFO_PORTS_100M:
+			link_info->speed = SPEED_100;
+			break;
+		case CARD_INFO_PORTS_1G:
+			link_info->speed = SPEED_1000;
+			break;
+		case CARD_INFO_PORTS_10G:
+			link_info->speed = SPEED_10000;
+			break;
+		case CARD_INFO_PORTS_25G:
+			link_info->speed = SPEED_25000;
+			break;
+		default:
+			link_info->speed = SPEED_UNKNOWN;
+		}
+
+		link_info->port = PORT_OTHER;
+	}
+
 	return 0;
 }
 
 int qeth_query_card_info(struct qeth_card *card,
-			 struct carrier_info *carrier_info)
+			 struct qeth_link_info *link_info)
 {
 	struct qeth_cmd_buffer *iob;
 
@@ -4894,8 +4947,162 @@ int qeth_query_card_info(struct qeth_card *card,
 	iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_CARD_INFO, 0);
 	if (!iob)
 		return -ENOMEM;
-	return qeth_send_ipa_cmd(card, iob, qeth_query_card_info_cb,
-					(void *)carrier_info);
+
+	return qeth_send_ipa_cmd(card, iob, qeth_query_card_info_cb, link_info);
+}
+
+static int qeth_init_link_info_oat_cb(struct qeth_card *card,
+				      struct qeth_reply *reply_priv,
+				      unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd = (struct qeth_ipa_cmd *)data;
+	struct qeth_link_info *link_info = reply_priv->param;
+	struct qeth_query_oat_physical_if *phys_if;
+	struct qeth_query_oat_reply *reply;
+
+	if (qeth_setadpparms_inspect_rc(cmd))
+		return -EIO;
+
+	/* Multi-part reply is unexpected, don't bother: */
+	if (cmd->data.setadapterparms.hdr.used_total > 1)
+		return -EINVAL;
+
+	/* Expect the reply to start with phys_if data: */
+	reply = &cmd->data.setadapterparms.data.query_oat.reply[0];
+	if (reply->type != QETH_QOAT_REPLY_TYPE_PHYS_IF ||
+	    reply->length < sizeof(*reply))
+		return -EINVAL;
+
+	phys_if = &reply->phys_if;
+
+	switch (phys_if->speed_duplex) {
+	case QETH_QOAT_PHYS_SPEED_10M_HALF:
+		link_info->speed = SPEED_10;
+		link_info->duplex = DUPLEX_HALF;
+		break;
+	case QETH_QOAT_PHYS_SPEED_10M_FULL:
+		link_info->speed = SPEED_10;
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case QETH_QOAT_PHYS_SPEED_100M_HALF:
+		link_info->speed = SPEED_100;
+		link_info->duplex = DUPLEX_HALF;
+		break;
+	case QETH_QOAT_PHYS_SPEED_100M_FULL:
+		link_info->speed = SPEED_100;
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case QETH_QOAT_PHYS_SPEED_1000M_HALF:
+		link_info->speed = SPEED_1000;
+		link_info->duplex = DUPLEX_HALF;
+		break;
+	case QETH_QOAT_PHYS_SPEED_1000M_FULL:
+		link_info->speed = SPEED_1000;
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case QETH_QOAT_PHYS_SPEED_10G_FULL:
+		link_info->speed = SPEED_10000;
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case QETH_QOAT_PHYS_SPEED_25G_FULL:
+		link_info->speed = SPEED_25000;
+		link_info->duplex = DUPLEX_FULL;
+		break;
+	case QETH_QOAT_PHYS_SPEED_UNKNOWN:
+	default:
+		link_info->speed = SPEED_UNKNOWN;
+		link_info->duplex = DUPLEX_UNKNOWN;
+		break;
+	}
+
+	switch (phys_if->media_type) {
+	case QETH_QOAT_PHYS_MEDIA_COPPER:
+		link_info->port = PORT_TP;
+		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
+		break;
+	case QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT:
+		link_info->port = PORT_FIBRE;
+		link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;
+		break;
+	case QETH_QOAT_PHYS_MEDIA_FIBRE_LONG:
+		link_info->port = PORT_FIBRE;
+		link_info->link_mode = QETH_LINK_MODE_FIBRE_LONG;
+		break;
+	default:
+		link_info->port = PORT_OTHER;
+		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static void qeth_init_link_info(struct qeth_card *card)
+{
+	card->info.link_info.duplex = DUPLEX_FULL;
+
+	if (IS_IQD(card) || IS_VM_NIC(card)) {
+		card->info.link_info.speed = SPEED_10000;
+		card->info.link_info.port = PORT_FIBRE;
+		card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;
+	} else {
+		switch (card->info.link_type) {
+		case QETH_LINK_TYPE_FAST_ETH:
+		case QETH_LINK_TYPE_LANE_ETH100:
+			card->info.link_info.speed = SPEED_100;
+			card->info.link_info.port = PORT_TP;
+			break;
+		case QETH_LINK_TYPE_GBIT_ETH:
+		case QETH_LINK_TYPE_LANE_ETH1000:
+			card->info.link_info.speed = SPEED_1000;
+			card->info.link_info.port = PORT_FIBRE;
+			break;
+		case QETH_LINK_TYPE_10GBIT_ETH:
+			card->info.link_info.speed = SPEED_10000;
+			card->info.link_info.port = PORT_FIBRE;
+			break;
+		case QETH_LINK_TYPE_25GBIT_ETH:
+			card->info.link_info.speed = SPEED_25000;
+			card->info.link_info.port = PORT_FIBRE;
+			break;
+		default:
+			dev_info(&card->gdev->dev, "Unknown link type %x\n",
+				 card->info.link_type);
+			card->info.link_info.speed = SPEED_UNKNOWN;
+			card->info.link_info.port = PORT_OTHER;
+		}
+
+		card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;
+	}
+
+	/* Get more accurate data via QUERY OAT: */
+	if (qeth_adp_supported(card, IPA_SETADP_QUERY_OAT)) {
+		struct qeth_link_info link_info;
+		struct qeth_cmd_buffer *iob;
+
+		iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_OAT,
+					   SETADP_DATA_SIZEOF(query_oat));
+		if (iob) {
+			struct qeth_ipa_cmd *cmd = __ipa_cmd(iob);
+			struct qeth_query_oat *oat_req;
+
+			oat_req = &cmd->data.setadapterparms.data.query_oat;
+			oat_req->subcmd_code = QETH_QOAT_SCOPE_INTERFACE;
+
+			if (!qeth_send_ipa_cmd(card, iob,
+					       qeth_init_link_info_oat_cb,
+					       &link_info)) {
+				if (link_info.speed != SPEED_UNKNOWN)
+					card->info.link_info.speed = link_info.speed;
+				if (link_info.duplex != DUPLEX_UNKNOWN)
+					card->info.link_info.duplex = link_info.duplex;
+				if (link_info.port != PORT_OTHER)
+					card->info.link_info.port = link_info.port;
+				if (link_info.link_mode != QETH_LINK_MODE_UNKNOWN)
+					card->info.link_info.link_mode = link_info.link_mode;
+			}
+		}
+	}
 }
 
 /**
@@ -5282,6 +5489,8 @@ static int qeth_hardsetup_card(struct qeth_card *card, bool *carrier_ok)
 			goto out;
 	}
 
+	qeth_init_link_info(card);
+
 	rc = qeth_init_qdio_queues(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "9err%d", rc);

drivers/s390/net/qeth_core_mpc.h

@@ -489,9 +489,45 @@ struct qeth_set_access_ctrl {
 	__u8 reserved[8];
 } __attribute__((packed));
 
+#define QETH_QOAT_PHYS_SPEED_UNKNOWN		0x00
+#define QETH_QOAT_PHYS_SPEED_10M_HALF		0x01
+#define QETH_QOAT_PHYS_SPEED_10M_FULL		0x02
+#define QETH_QOAT_PHYS_SPEED_100M_HALF		0x03
+#define QETH_QOAT_PHYS_SPEED_100M_FULL		0x04
+#define QETH_QOAT_PHYS_SPEED_1000M_HALF		0x05
+#define QETH_QOAT_PHYS_SPEED_1000M_FULL		0x06
+// n/a						0x07
+#define QETH_QOAT_PHYS_SPEED_10G_FULL		0x08
+// n/a						0x09
+#define QETH_QOAT_PHYS_SPEED_25G_FULL		0x0A
+
+#define QETH_QOAT_PHYS_MEDIA_COPPER		0x01
+#define QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT	0x02
+#define QETH_QOAT_PHYS_MEDIA_FIBRE_LONG		0x04
+
+struct qeth_query_oat_physical_if {
+	u8 res_head[33];
+	u8 speed_duplex;
+	u8 media_type;
+	u8 res_tail[29];
+};
+
+#define QETH_QOAT_REPLY_TYPE_PHYS_IF		0x0004
+
+struct qeth_query_oat_reply {
+	u16 type;
+	u16 length;
+	u16 version;
+	u8 res[10];
+	struct qeth_query_oat_physical_if phys_if;
+};
+
+#define QETH_QOAT_SCOPE_INTERFACE		0x00000001
+
 struct qeth_query_oat {
-	__u32 subcmd_code;
-	__u8 reserved[12];
+	u32 subcmd_code;
+	u8 reserved[12];
+	struct qeth_query_oat_reply reply[];
 } __packed;
 
 struct qeth_qoat_priv {

drivers/s390/net/qeth_ethtool.c

@@ -324,8 +324,8 @@ static int qeth_set_per_queue_coalesce(struct net_device *dev, u32 queue,
 /* Autoneg and full-duplex are supported and advertised unconditionally.     */
 /* Always advertise and support all speeds up to specified, and only one     */
 /* specified port type.							     */
-static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd,
-				int maxspeed, int porttype)
+static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd,
+					enum qeth_link_mode link_mode)
 {
 	ethtool_link_ksettings_zero_link_mode(cmd, supported);
 	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
@@ -334,29 +334,12 @@ static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd,
 	ethtool_link_ksettings_add_link_mode(cmd, supported, Autoneg);
 	ethtool_link_ksettings_add_link_mode(cmd, advertising, Autoneg);
 
-	switch (porttype) {
+	switch (cmd->base.port) {
 	case PORT_TP:
 		ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
 		ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
-		break;
-	case PORT_FIBRE:
-		ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
-		break;
-	default:
-		ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
-		WARN_ON_ONCE(1);
-	}
 
-	/* partially does fall through, to also select lower speeds */
-	switch (maxspeed) {
-	case SPEED_25000:
-		ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     25000baseSR_Full);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     25000baseSR_Full);
-		break;
+		switch (cmd->base.speed) {
 		case SPEED_10000:
 			ethtool_link_ksettings_add_link_mode(cmd, supported,
 							     10000baseT_Full);
@@ -394,126 +377,76 @@ static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd,
 							     10baseT_Half);
 			break;
 		default:
+			break;
+		}
+
+		break;
+	case PORT_FIBRE:
+		ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+		ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
+
+		switch (cmd->base.speed) {
+		case SPEED_25000:
 			ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     10baseT_Full);
+							     25000baseSR_Full);
 			ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     10baseT_Full);
+							     25000baseSR_Full);
+			break;
+		case SPEED_10000:
+			if (link_mode == QETH_LINK_MODE_FIBRE_LONG) {
 				ethtool_link_ksettings_add_link_mode(cmd, supported,
-						     10baseT_Half);
+								     10000baseLR_Full);
 				ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     10baseT_Half);
-		WARN_ON_ONCE(1);
+								     10000baseLR_Full);
+			} else if (link_mode == QETH_LINK_MODE_FIBRE_SHORT) {
+				ethtool_link_ksettings_add_link_mode(cmd, supported,
+								     10000baseSR_Full);
+				ethtool_link_ksettings_add_link_mode(cmd, advertising,
+								     10000baseSR_Full);
+			}
+			break;
+		case SPEED_1000:
+			ethtool_link_ksettings_add_link_mode(cmd, supported,
+							     1000baseX_Full);
+			ethtool_link_ksettings_add_link_mode(cmd, advertising,
+							     1000baseX_Full);
+			break;
+		default:
+			break;
 		}
-}
 
+		break;
+	default:
+		break;
+	}
+}
 
 static int qeth_get_link_ksettings(struct net_device *netdev,
 				   struct ethtool_link_ksettings *cmd)
 {
 	struct qeth_card *card = netdev->ml_priv;
-	enum qeth_link_types link_type;
-	struct carrier_info carrier_info;
-	int rc;
-
-	if (IS_IQD(card) || IS_VM_NIC(card))
-		link_type = QETH_LINK_TYPE_10GBIT_ETH;
-	else
-		link_type = card->info.link_type;
+	struct qeth_link_info link_info;
 
-	cmd->base.duplex = DUPLEX_FULL;
+	cmd->base.speed = card->info.link_info.speed;
+	cmd->base.duplex = card->info.link_info.duplex;
+	cmd->base.port = card->info.link_info.port;
 	cmd->base.autoneg = AUTONEG_ENABLE;
 	cmd->base.phy_address = 0;
 	cmd->base.mdio_support = 0;
 	cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
 	cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
 
-	switch (link_type) {
-	case QETH_LINK_TYPE_FAST_ETH:
-	case QETH_LINK_TYPE_LANE_ETH100:
-		cmd->base.speed = SPEED_100;
-		cmd->base.port = PORT_TP;
-		break;
-	case QETH_LINK_TYPE_GBIT_ETH:
-	case QETH_LINK_TYPE_LANE_ETH1000:
-		cmd->base.speed = SPEED_1000;
-		cmd->base.port = PORT_FIBRE;
-		break;
-	case QETH_LINK_TYPE_10GBIT_ETH:
-		cmd->base.speed = SPEED_10000;
-		cmd->base.port = PORT_FIBRE;
-		break;
-	case QETH_LINK_TYPE_25GBIT_ETH:
-		cmd->base.speed = SPEED_25000;
-		cmd->base.port = PORT_FIBRE;
-		break;
-	default:
-		cmd->base.speed = SPEED_10;
-		cmd->base.port = PORT_TP;
-	}
-	qeth_set_cmd_adv_sup(cmd, cmd->base.speed, cmd->base.port);
-
 	/* Check if we can obtain more accurate information.	 */
-	/* If QUERY_CARD_INFO command is not supported or fails, */
-	/* just return the heuristics that was filled above.	 */
-	rc = qeth_query_card_info(card, &carrier_info);
-	if (rc == -EOPNOTSUPP) /* for old hardware, return heuristic */
-		return 0;
-	if (rc) /* report error from the hardware operation */
-		return rc;
-	/* on success, fill in the information got from the hardware */
-
-	netdev_dbg(netdev,
-	"card info: card_type=0x%02x, port_mode=0x%04x, port_speed=0x%08x\n",
-			carrier_info.card_type,
-			carrier_info.port_mode,
-			carrier_info.port_speed);
-
-	/* Update attributes for which we've obtained more authoritative */
-	/* information, leave the rest the way they where filled above.  */
-	switch (carrier_info.card_type) {
-	case CARD_INFO_TYPE_1G_COPPER_A:
-	case CARD_INFO_TYPE_1G_COPPER_B:
-		cmd->base.port = PORT_TP;
-		qeth_set_cmd_adv_sup(cmd, SPEED_1000, cmd->base.port);
-		break;
-	case CARD_INFO_TYPE_1G_FIBRE_A:
-	case CARD_INFO_TYPE_1G_FIBRE_B:
-		cmd->base.port = PORT_FIBRE;
-		qeth_set_cmd_adv_sup(cmd, SPEED_1000, cmd->base.port);
-		break;
-	case CARD_INFO_TYPE_10G_FIBRE_A:
-	case CARD_INFO_TYPE_10G_FIBRE_B:
-		cmd->base.port = PORT_FIBRE;
-		qeth_set_cmd_adv_sup(cmd, SPEED_10000, cmd->base.port);
-		break;
-	}
-
-	switch (carrier_info.port_mode) {
-	case CARD_INFO_PORTM_FULLDUPLEX:
-		cmd->base.duplex = DUPLEX_FULL;
-		break;
-	case CARD_INFO_PORTM_HALFDUPLEX:
-		cmd->base.duplex = DUPLEX_HALF;
-		break;
+	if (!qeth_query_card_info(card, &link_info)) {
+		if (link_info.speed != SPEED_UNKNOWN)
+			cmd->base.speed = link_info.speed;
+		if (link_info.duplex != DUPLEX_UNKNOWN)
+			cmd->base.duplex = link_info.duplex;
+		if (link_info.port != PORT_OTHER)
+			cmd->base.port = link_info.port;
 	}
 
-	switch (carrier_info.port_speed) {
-	case CARD_INFO_PORTS_10M:
-		cmd->base.speed = SPEED_10;
-		break;
-	case CARD_INFO_PORTS_100M:
-		cmd->base.speed = SPEED_100;
-		break;
-	case CARD_INFO_PORTS_1G:
-		cmd->base.speed = SPEED_1000;
-		break;
-	case CARD_INFO_PORTS_10G:
-		cmd->base.speed = SPEED_10000;
-		break;
-	case CARD_INFO_PORTS_25G:
-		cmd->base.speed = SPEED_25000;
-		break;
-	}
+	qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);
 
 	return 0;
 }

drivers/s390/net/qeth_l2_main.c

@@ -737,8 +737,6 @@ static void qeth_l2_dev2br_an_set_cb(void *priv,
  *
  *	On enable, emits a series of address notifications for all
  *	currently registered hosts.
- *
- *	Must be called under rtnl_lock
  */
 static int qeth_l2_dev2br_an_set(struct qeth_card *card, bool enable)
 {
@@ -1289,16 +1287,19 @@ static void qeth_l2_dev2br_worker(struct work_struct *work)
 	if (READ_ONCE(card->info.pnso_mode) == QETH_PNSO_NONE)
 		goto free;
 
+	if (data->ac_event.lost_event_mask) {
 		/* Potential re-config in progress, try again later: */
 		if (!rtnl_trylock()) {
 			queue_delayed_work(card->event_wq, dwork,
 					   msecs_to_jiffies(100));
 			return;
 		}
-	if (!netif_device_present(card->dev))
-		goto out_unlock;
 
-	if (data->ac_event.lost_event_mask) {
+		if (!netif_device_present(card->dev)) {
+			rtnl_unlock();
+			goto free;
+		}
+
 		QETH_DBF_MESSAGE(3,
 				 "Address change notification overflow on device %x\n",
 				 CARD_DEVID(card));
@@ -1328,6 +1329,8 @@ static void qeth_l2_dev2br_worker(struct work_struct *work)
 					 "Address Notification resynced on device %x\n",
 					 CARD_DEVID(card));
 		}
+
+		rtnl_unlock();
 	} else {
 		for (i = 0; i < data->ac_event.num_entries; i++) {
 			struct qeth_ipacmd_addr_change_entry *entry =
@@ -1339,9 +1342,6 @@ static void qeth_l2_dev2br_worker(struct work_struct *work)
 		}
 	}
 
-out_unlock:
-	rtnl_unlock();
-
 free:
 	kfree(data);
 }
@@ -2310,11 +2310,8 @@ static void qeth_l2_set_offline(struct qeth_card *card)
 		card->state = CARD_STATE_DOWN;
 
 	qeth_l2_set_pnso_mode(card, QETH_PNSO_NONE);
-	if (priv->brport_features & BR_LEARNING_SYNC) {
-		rtnl_lock();
+	if (priv->brport_features & BR_LEARNING_SYNC)
 		qeth_l2_dev2br_fdb_flush(card);
-		rtnl_unlock();
-	}
 }
 
 /* Returns zero if the command is successfully "consumed" */

drivers/s390/net/qeth_l3_main.c

@@ -104,9 +104,6 @@ static bool qeth_l3_is_addr_covered_by_ipato(struct qeth_card *card,
 		qeth_l3_convert_addr_to_bits(ipatoe->addr, ipatoe_bits,
 					  (ipatoe->proto == QETH_PROT_IPV4) ?
 					  4 : 16);
-		if (addr->proto == QETH_PROT_IPV4)
-			rc = !memcmp(addr_bits, ipatoe_bits, ipatoe->mask_bits);
-		else
 		rc = !memcmp(addr_bits, ipatoe_bits, ipatoe->mask_bits);
 		if (rc)
 			break;