Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Series of fixes for 3.10.  There are some usual driver fixes (mostly
  on s5p/exynos playform drivers), plus some fixes at V4L2 core"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits)
  [media] soc_camera: error dev remove and v4l2 call
  [media] sh_veu: fix the buffer size calculation
  [media] sh_veu: keep power supply until the m2m context is released
  [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted
  [media] v4l2-ioctl: don't print the clips list
  [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls
  [media] cx88: fix NULL pointer dereference
  [media] DocBook/media/v4l: update version number
  [media] exynos4-is: Remove "sysreg" clock handling
  [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev
  [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured
  [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded
  [media] s5p-mfc: Add NULL check for allocated buffer
  [media] s5p-mfc: added missing end-of-lines in debug messages
  [media] s5p-mfc: v4l2 controls setup routine moved to initialization code
  [media] s5p-mfc: separate encoder parameters for h264 and mpeg4
  [media] s5p-mfc: Remove special clock usage in driver
  [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function
  [media] v4l2: mem2mem: save irq flags correctly
  [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support
  ...

Documentation/DocBook/media/v4l/dev-codec.xml

   <title>Codec Interface</title>
 
-  <note>
-    <title>Suspended</title>
+  <para>A V4L2 codec can compress, decompress, transform, or otherwise
+convert video data from one format into another format, in memory. Typically
+such devices are memory-to-memory devices (i.e. devices with the
+<constant>V4L2_CAP_VIDEO_M2M</constant> or <constant>V4L2_CAP_VIDEO_M2M_MPLANE</constant>
+capability set).
+</para>
 
-    <para>This interface has been be suspended from the V4L2 API
-implemented in Linux 2.6 until we have more experience with codec
-device interfaces.</para>
-  </note>
+  <para>A memory-to-memory video node acts just like a normal video node, but it
+supports both output (sending frames from memory to the codec hardware) and
+capture (receiving the processed frames from the codec hardware into memory)
+stream I/O. An application will have to setup the stream
+I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output
+to start the codec.</para>
 
-  <para>A V4L2 codec can compress, decompress, transform, or otherwise
-convert video data from one format into another format, in memory.
-Applications send data to be converted to the driver through a
-&func-write; call, and receive the converted data through a
-&func-read; call. For efficiency a driver may also support streaming
-I/O.</para>
+  <para>Video compression codecs use the MPEG controls to setup their codec parameters
+(note that the MPEG controls actually support many more codecs than just MPEG).
+See <xref linkend="mpeg-controls"></xref>.</para>
 
-  <para>[to do]</para>
+  <para>Memory-to-memory devices can often be used as a shared resource: you can
+open the video node multiple times, each application setting up their own codec properties
+that are local to the file handle, and each can use it independently from the others.
+The driver will arbitrate access to the codec and reprogram it whenever another file
+handler gets access. This is different from the usual video node behavior where the video properties
+are global to the device (i.e. changing something through one file handle is visible
+through another file handle).</para>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -493,7 +493,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.9</subtitle>
+ <subtitle>Revision 3.10</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/devicetree/bindings/media/exynos-fimc-lite.txt

@@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
 
 Required properties:
 
-- compatible	: should be "samsung,exynos4212-fimc" for Exynos4212 and
+- compatible	: should be "samsung,exynos4212-fimc-lite" for Exynos4212 and
 		  Exynos4412 SoCs;
 - reg		: physical base address and size of the device memory mapped
 		  registers;

drivers/media/i2c/s5c73m3/s5c73m3-core.c

@@ -956,7 +956,7 @@ static int s5c73m3_oif_enum_frame_interval(struct v4l2_subdev *sd,
 
 	if (fie->pad != OIF_SOURCE_PAD)
 		return -EINVAL;
-	if (fie->index > ARRAY_SIZE(s5c73m3_intervals))
+	if (fie->index >= ARRAY_SIZE(s5c73m3_intervals))
 		return -EINVAL;
 
 	mutex_lock(&state->lock);

drivers/media/pci/cx88/cx88-alsa.c

@@ -615,7 +615,7 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol,
 	int changed = 0;
 	u32 old;
 
-	if (core->board.audio_chip == V4L2_IDENT_WM8775)
+	if (core->sd_wm8775)
 		snd_cx88_wm8775_volume_put(kcontrol, value);
 
 	left = value->value.integer.value[0] & 0x3f;
@@ -682,8 +682,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
 		vol ^= bit;
 		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
 		/* Pass mute onto any WM8775 */
-		if ((core->board.audio_chip == V4L2_IDENT_WM8775) &&
-		    ((1<<6) == bit))
+		if (core->sd_wm8775 && ((1<<6) == bit))
 			wm8775_s_ctrl(core, V4L2_CID_AUDIO_MUTE, 0 != (vol & bit));
 		ret = 1;
 	}
@@ -903,7 +902,7 @@ static int cx88_audio_initdev(struct pci_dev *pci,
 		goto error;
 
 	/* If there's a wm8775 then add a Line-In ALC switch */
-	if (core->board.audio_chip == V4L2_IDENT_WM8775)
+	if (core->sd_wm8775)
 		snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip));
 
 	strcpy (card->driver, "CX88x");

drivers/media/pci/cx88/cx88-video.c

@@ -385,8 +385,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
 		/* The wm8775 module has the "2" route hardwired into
 		   the initialization. Some boards may use different
 		   routes for different inputs. HVR-1300 surely does */
-		if (core->board.audio_chip &&
-		    core->board.audio_chip == V4L2_IDENT_WM8775) {
+		if (core->sd_wm8775) {
 			call_all(core, audio, s_routing,
 				 INPUT(input).audioroute, 0, 0);
 		}
@@ -771,8 +770,7 @@ static int video_open(struct file *file)
 		cx_write(MO_GP1_IO, core->board.radio.gpio1);
 		cx_write(MO_GP2_IO, core->board.radio.gpio2);
 		if (core->board.radio.audioroute) {
-			if(core->board.audio_chip &&
-				core->board.audio_chip == V4L2_IDENT_WM8775) {
+			if (core->sd_wm8775) {
 				call_all(core, audio, s_routing,
 					core->board.radio.audioroute, 0, 0);
 			}
@@ -959,7 +957,7 @@ static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl)
 	u32 value,mask;
 
 	/* Pass changes onto any WM8775 */
-	if (core->board.audio_chip == V4L2_IDENT_WM8775) {
+	if (core->sd_wm8775) {
 		switch (ctrl->id) {
 		case V4L2_CID_AUDIO_MUTE:
 			wm8775_s_ctrl(core, ctrl->id, ctrl->val);

drivers/media/platform/coda.c

@@ -576,6 +576,14 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
 	return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
 }
 
+static int vidioc_create_bufs(struct file *file, void *priv,
+			      struct v4l2_create_buffers *create)
+{
+	struct coda_ctx *ctx = fh_to_ctx(priv);
+
+	return v4l2_m2m_create_bufs(file, ctx->m2m_ctx, create);
+}
+
 static int vidioc_streamon(struct file *file, void *priv,
 			   enum v4l2_buf_type type)
 {
@@ -610,6 +618,7 @@ static const struct v4l2_ioctl_ops coda_ioctl_ops = {
 
 	.vidioc_qbuf		= vidioc_qbuf,
 	.vidioc_dqbuf		= vidioc_dqbuf,
+	.vidioc_create_bufs	= vidioc_create_bufs,
 
 	.vidioc_streamon	= vidioc_streamon,
 	.vidioc_streamoff	= vidioc_streamoff,

drivers/media/platform/davinci/vpbe_display.c

@@ -916,6 +916,21 @@ static int vpbe_display_s_fmt(struct file *file, void *priv,
 	other video window */
 
 	layer->pix_fmt = *pixfmt;
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) {
+		struct vpbe_layer *otherlayer;
+
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
+		/* if other layer is available, only
+		 * claim it, do not configure it
+		 */
+		ret = osd_device->ops.request_layer(osd_device,
+						    otherlayer->layer_info.id);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "Display Manager failed to allocate layer\n");
+			return -EBUSY;
+		}
+	}
 
 	/* Get osd layer config */
 	osd_device->ops.get_layer_config(osd_device,

drivers/media/platform/davinci/vpfe_capture.c

@@ -1837,7 +1837,7 @@ static int vpfe_probe(struct platform_device *pdev)
 	if (NULL == ccdc_cfg) {
 		v4l2_err(pdev->dev.driver,
 			 "Memory allocation failed for ccdc_cfg\n");
-		goto probe_free_lock;
+		goto probe_free_dev_mem;
 	}
 
 	mutex_lock(&ccdc_lock);
@@ -1991,7 +1991,6 @@ static int vpfe_probe(struct platform_device *pdev)
 	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
 probe_free_ccdc_cfg_mem:
 	kfree(ccdc_cfg);
-probe_free_lock:
 	mutex_unlock(&ccdc_lock);
 probe_free_dev_mem:
 	kfree(vpfe_dev);

drivers/media/platform/exynos4-is/fimc-is-regs.c

@@ -174,7 +174,7 @@ int fimc_is_hw_change_mode(struct fimc_is *is)
 		HIC_CAPTURE_STILL, HIC_CAPTURE_VIDEO,
 	};
 
-	if (WARN_ON(is->config_index > ARRAY_SIZE(cmd)))
+	if (WARN_ON(is->config_index >= ARRAY_SIZE(cmd)))
 		return -EINVAL;
 
 	mcuctl_write(cmd[is->config_index], is, MCUCTL_REG_ISSR(0));

drivers/media/platform/exynos4-is/fimc-is.c

@@ -48,7 +48,6 @@ static char *fimc_is_clocks[ISS_CLKS_MAX] = {
 	[ISS_CLK_LITE0]			= "lite0",
 	[ISS_CLK_LITE1]			= "lite1",
 	[ISS_CLK_MPLL]			= "mpll",
-	[ISS_CLK_SYSREG]		= "sysreg",
 	[ISS_CLK_ISP]			= "isp",
 	[ISS_CLK_DRC]			= "drc",
 	[ISS_CLK_FD]			= "fd",
@@ -71,7 +70,6 @@ static void fimc_is_put_clocks(struct fimc_is *is)
 	for (i = 0; i < ISS_CLKS_MAX; i++) {
 		if (IS_ERR(is->clocks[i]))
 			continue;
-		clk_unprepare(is->clocks[i]);
 		clk_put(is->clocks[i]);
 		is->clocks[i] = ERR_PTR(-EINVAL);
 	}
@@ -90,12 +88,6 @@ static int fimc_is_get_clocks(struct fimc_is *is)
 			ret = PTR_ERR(is->clocks[i]);
 			goto err;
 		}
-		ret = clk_prepare(is->clocks[i]);
-		if (ret < 0) {
-			clk_put(is->clocks[i]);
-			is->clocks[i] = ERR_PTR(-EINVAL);
-			goto err;
-		}
 	}
 
 	return 0;
@@ -103,7 +95,7 @@ static int fimc_is_get_clocks(struct fimc_is *is)
 	fimc_is_put_clocks(is);
 	dev_err(&is->pdev->dev, "failed to get clock: %s\n",
 		fimc_is_clocks[i]);
-	return -ENXIO;
+	return ret;
 }
 
 static int fimc_is_setup_clocks(struct fimc_is *is)
@@ -144,7 +136,7 @@ int fimc_is_enable_clocks(struct fimc_is *is)
 	for (i = 0; i < ISS_GATE_CLKS_MAX; i++) {
 		if (IS_ERR(is->clocks[i]))
 			continue;
-		ret = clk_enable(is->clocks[i]);
+		ret = clk_prepare_enable(is->clocks[i]);
 		if (ret < 0) {
 			dev_err(&is->pdev->dev, "clock %s enable failed\n",
 				fimc_is_clocks[i]);
@@ -163,7 +155,7 @@ void fimc_is_disable_clocks(struct fimc_is *is)
 
 	for (i = 0; i < ISS_GATE_CLKS_MAX; i++) {
 		if (!IS_ERR(is->clocks[i])) {
-			clk_disable(is->clocks[i]);
+			clk_disable_unprepare(is->clocks[i]);
 			pr_debug("disabled clock: %s\n", fimc_is_clocks[i]);
 		}
 	}
@@ -326,6 +318,11 @@ int fimc_is_start_firmware(struct fimc_is *is)
 	struct device *dev = &is->pdev->dev;
 	int ret;
 
+	if (is->fw.f_w == NULL) {
+		dev_err(dev, "firmware is not loaded\n");
+		return -EINVAL;
+	}
+
 	memcpy(is->memory.vaddr, is->fw.f_w->data, is->fw.f_w->size);
 	wmb();
 
@@ -941,7 +938,8 @@ static int fimc_is_remove(struct platform_device *pdev)
 	vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
 	fimc_is_put_clocks(is);
 	fimc_is_debugfs_remove(is);
-	release_firmware(is->fw.f_w);
+	if (is->fw.f_w)
+		release_firmware(is->fw.f_w);
 	fimc_is_free_cpu_memory(is);
 
 	return 0;

drivers/media/platform/exynos4-is/fimc-is.h

@@ -73,7 +73,6 @@ enum {
 	ISS_CLK_LITE0,
 	ISS_CLK_LITE1,
 	ISS_CLK_MPLL,
-	ISS_CLK_SYSREG,
 	ISS_CLK_ISP,
 	ISS_CLK_DRC,
 	ISS_CLK_FD,

drivers/media/platform/exynos4-is/fimc-isp.c

@@ -138,7 +138,7 @@ static int fimc_isp_subdev_get_fmt(struct v4l2_subdev *sd,
 		return 0;
 	}
 
-	mf->colorspace = V4L2_COLORSPACE_JPEG;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	mutex_lock(&isp->subdev_lock);
 	__is_get_frame_size(is, &cur_fmt);
@@ -194,7 +194,7 @@ static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd,
 	v4l2_dbg(1, debug, sd, "%s: pad%d: code: 0x%x, %dx%d\n",
 		 __func__, fmt->pad, mf->code, mf->width, mf->height);
 
-	mf->colorspace = V4L2_COLORSPACE_JPEG;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	mutex_lock(&isp->subdev_lock);
 	__isp_subdev_try_format(isp, fmt);

drivers/media/platform/exynos4-is/mipi-csis.c

@@ -746,7 +746,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 	node = v4l2_of_get_next_endpoint(node, NULL);
 	if (!node) {
 		dev_err(&pdev->dev, "No port node at %s\n",
-					node->full_name);
+				pdev->dev.of_node->full_name);
 		return -EINVAL;
 	}
 	/* Get port node and validate MIPI-CSI channel id. */

drivers/media/platform/s3c-camif/camif-core.h

@@ -229,7 +229,7 @@ struct camif_vp {
 	unsigned int		state;
 	u16			fmt_flags;
 	u8			id;
-	u8			rotation;
+	u16			rotation;
 	u8			hflip;
 	u8			vflip;
 	unsigned int		offset;

drivers/media/platform/s5p-mfc/s5p_mfc.c

@@ -397,7 +397,7 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
 leave_handle_frame:
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING)
-				    || ctx->dst_queue_cnt < ctx->dpb_count)
+				    || ctx->dst_queue_cnt < ctx->pb_count)
 		clear_work_bit(ctx);
 	s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
 	wake_up_ctx(ctx, reason, err);
@@ -473,7 +473,7 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
 
 		s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx);
 
-		ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count,
+		ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count,
 				dev);
 		ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
 				dev);
@@ -562,7 +562,7 @@ static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx,
 	struct s5p_mfc_dev *dev = ctx->dev;
 	struct s5p_mfc_buf *mb_entry;
 
-	mfc_debug(2, "Stream completed");
+	mfc_debug(2, "Stream completed\n");
 
 	s5p_mfc_clear_int_flags(dev);
 	ctx->int_type = reason;
@@ -1362,7 +1362,6 @@ static struct s5p_mfc_variant mfc_drvdata_v5 = {
 	.port_num	= MFC_NUM_PORTS,
 	.buf_size	= &buf_size_v5,
 	.buf_align	= &mfc_buf_align_v5,
-	.mclk_name	= "sclk_mfc",
 	.fw_name	= "s5p-mfc.fw",
 };
 
@@ -1389,7 +1388,6 @@ static struct s5p_mfc_variant mfc_drvdata_v6 = {
 	.port_num	= MFC_NUM_PORTS_V6,
 	.buf_size	= &buf_size_v6,
 	.buf_align	= &mfc_buf_align_v6,
-	.mclk_name      = "aclk_333",
 	.fw_name        = "s5p-mfc-v6.fw",
 };
 

drivers/media/platform/s5p-mfc/s5p_mfc_common.h

@@ -138,6 +138,7 @@ enum s5p_mfc_inst_state {
 	MFCINST_INIT = 100,
 	MFCINST_GOT_INST,
 	MFCINST_HEAD_PARSED,
+	MFCINST_HEAD_PRODUCED,
 	MFCINST_BUFS_SET,
 	MFCINST_RUNNING,
 	MFCINST_FINISHING,
@@ -231,7 +232,6 @@ struct s5p_mfc_variant {
 	unsigned int port_num;
 	struct s5p_mfc_buf_size *buf_size;
 	struct s5p_mfc_buf_align *buf_align;
-	char	*mclk_name;
 	char	*fw_name;
 };
 
@@ -438,7 +438,7 @@ struct s5p_mfc_enc_params {
 	u32 rc_framerate_num;
 	u32 rc_framerate_denom;
 
-	union {
+	struct {
 		struct s5p_mfc_h264_enc_params h264;
 		struct s5p_mfc_mpeg4_enc_params mpeg4;
 	} codec;
@@ -602,7 +602,7 @@ struct s5p_mfc_ctx {
 	int after_packed_pb;
 	int sei_fp_parse;
 
-	int dpb_count;
+	int pb_count;
 	int total_dpb_count;
 	int mv_count;
 	/* Buffers */

drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c

@@ -38,7 +38,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
 	dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size,
 					&dev->bank1, GFP_KERNEL);
 
-	if (IS_ERR(dev->fw_virt_addr)) {
+	if (IS_ERR_OR_NULL(dev->fw_virt_addr)) {
 		dev->fw_virt_addr = NULL;
 		mfc_err("Allocating bitprocessor buffer failed\n");
 		return -ENOMEM;

drivers/media/platform/s5p-mfc/s5p_mfc_debug.h

@@ -30,8 +30,8 @@ extern int debug;
 #define mfc_debug(level, fmt, args...)
 #endif
 
-#define mfc_debug_enter() mfc_debug(5, "enter")
-#define mfc_debug_leave() mfc_debug(5, "leave")
+#define mfc_debug_enter() mfc_debug(5, "enter\n")
+#define mfc_debug_leave() mfc_debug(5, "leave\n")
 
 #define mfc_err(fmt, args...)				\
 	do {						\

drivers/media/platform/s5p-mfc/s5p_mfc_dec.c

@@ -210,11 +210,11 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
 	/* Context is to decode a frame */
 	if (ctx->src_queue_cnt >= 1 &&
 	    ctx->state == MFCINST_RUNNING &&
-	    ctx->dst_queue_cnt >= ctx->dpb_count)
+	    ctx->dst_queue_cnt >= ctx->pb_count)
 		return 1;
 	/* Context is to return last frame */
 	if (ctx->state == MFCINST_FINISHING &&
-	    ctx->dst_queue_cnt >= ctx->dpb_count)
+	    ctx->dst_queue_cnt >= ctx->pb_count)
 		return 1;
 	/* Context is to set buffers */
 	if (ctx->src_queue_cnt >= 1 &&
@@ -224,7 +224,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
 	/* Resolution change */
 	if ((ctx->state == MFCINST_RES_CHANGE_INIT ||
 		ctx->state == MFCINST_RES_CHANGE_FLUSH) &&
-		ctx->dst_queue_cnt >= ctx->dpb_count)
+		ctx->dst_queue_cnt >= ctx->pb_count)
 		return 1;
 	if (ctx->state == MFCINST_RES_CHANGE_END &&
 		ctx->src_queue_cnt >= 1)
@@ -537,7 +537,7 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 			mfc_err("vb2_reqbufs on capture failed\n");
 			return ret;
 		}
-		if (reqbufs->count < ctx->dpb_count) {
+		if (reqbufs->count < ctx->pb_count) {
 			mfc_err("Not enough buffers allocated\n");
 			reqbufs->count = 0;
 			s5p_mfc_clock_on();
@@ -751,7 +751,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
 		if (ctx->state >= MFCINST_HEAD_PARSED &&
 		    ctx->state < MFCINST_ABORT) {
-			ctrl->val = ctx->dpb_count;
+			ctrl->val = ctx->pb_count;
 			break;
 		} else if (ctx->state != MFCINST_INIT) {
 			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
@@ -763,7 +763,7 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
 				S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0);
 		if (ctx->state >= MFCINST_HEAD_PARSED &&
 		    ctx->state < MFCINST_ABORT) {
-			ctrl->val = ctx->dpb_count;
+			ctrl->val = ctx->pb_count;
 		} else {
 			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
 			return -EINVAL;
@@ -924,10 +924,10 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq,
 		/* Output plane count is 2 - one for Y and one for CbCr */
 		*plane_count = 2;
 		/* Setup buffer count */
-		if (*buf_count < ctx->dpb_count)
-			*buf_count = ctx->dpb_count;
-		if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB)
-			*buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB;
+		if (*buf_count < ctx->pb_count)
+			*buf_count = ctx->pb_count;
+		if (*buf_count > ctx->pb_count + MFC_MAX_EXTRA_DPB)
+			*buf_count = ctx->pb_count + MFC_MAX_EXTRA_DPB;
 		if (*buf_count > MFC_MAX_BUFFERS)
 			*buf_count = MFC_MAX_BUFFERS;
 	} else {

drivers/media/platform/s5p-mfc/s5p_mfc_enc.c

@@ -592,7 +592,7 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
 		return 1;
 	/* context is ready to encode a frame */
 	if ((ctx->state == MFCINST_RUNNING ||
-		ctx->state == MFCINST_HEAD_PARSED) &&
+		ctx->state == MFCINST_HEAD_PRODUCED) &&
 		ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1)
 		return 1;
 	/* context is ready to encode remaining frames */
@@ -649,6 +649,7 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx)
 	struct s5p_mfc_enc_params *p = &ctx->enc_params;
 	struct s5p_mfc_buf *dst_mb;
 	unsigned long flags;
+	unsigned int enc_pb_count;
 
 	if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) {
 		spin_lock_irqsave(&dev->irqlock, flags);
@@ -661,18 +662,19 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx)
 		vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE);
 		spin_unlock_irqrestore(&dev->irqlock, flags);
 	}
-	if (IS_MFCV6(dev)) {
-		ctx->state = MFCINST_HEAD_PARSED; /* for INIT_BUFFER cmd */
-	} else {
+
+	if (!IS_MFCV6(dev)) {
 		ctx->state = MFCINST_RUNNING;
 		if (s5p_mfc_ctx_ready(ctx))
 			set_work_bit_irqsave(ctx);
 		s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
-	}
-
-	if (IS_MFCV6(dev))
-		ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops,
+	} else {
+		enc_pb_count = s5p_mfc_hw_call(dev->mfc_ops,
 				get_enc_dpb_count, dev);
+		if (ctx->pb_count < enc_pb_count)
+			ctx->pb_count = enc_pb_count;
+		ctx->state = MFCINST_HEAD_PRODUCED;
+	}
 
 	return 0;
 }
@@ -717,9 +719,9 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
 
 	slice_type = s5p_mfc_hw_call(dev->mfc_ops, get_enc_slice_type, dev);
 	strm_size = s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev);
-	mfc_debug(2, "Encoded slice type: %d", slice_type);
-	mfc_debug(2, "Encoded stream size: %d", strm_size);
-	mfc_debug(2, "Display order: %d",
+	mfc_debug(2, "Encoded slice type: %d\n", slice_type);
+	mfc_debug(2, "Encoded stream size: %d\n", strm_size);
+	mfc_debug(2, "Display order: %d\n",
 		  mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT));
 	spin_lock_irqsave(&dev->irqlock, flags);
 	if (slice_type >= 0) {
@@ -1055,15 +1057,13 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 		}
 		ctx->capture_state = QUEUE_BUFS_REQUESTED;
 
-		if (!IS_MFCV6(dev)) {
-			ret = s5p_mfc_hw_call(ctx->dev->mfc_ops,
-					alloc_codec_buffers, ctx);
-			if (ret) {
-				mfc_err("Failed to allocate encoding buffers\n");
-				reqbufs->count = 0;
-				ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
-				return -ENOMEM;
-			}
+		ret = s5p_mfc_hw_call(ctx->dev->mfc_ops,
+				alloc_codec_buffers, ctx);
+		if (ret) {
+			mfc_err("Failed to allocate encoding buffers\n");
+			reqbufs->count = 0;
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			return -ENOMEM;
 		}
 	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 		if (ctx->output_state != QUEUE_FREE) {
@@ -1071,6 +1071,19 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 							ctx->output_state);
 			return -EINVAL;
 		}
+
+		if (IS_MFCV6(dev)) {
+			/* Check for min encoder buffers */
+			if (ctx->pb_count &&
+				(reqbufs->count < ctx->pb_count)) {
+				reqbufs->count = ctx->pb_count;
+				mfc_debug(2, "Minimum %d output buffers needed\n",
+						ctx->pb_count);
+			} else {
+				ctx->pb_count = reqbufs->count;
+			}
+		}
+
 		ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
 		if (ret != 0) {
 			mfc_err("error in vb2_reqbufs() for E(S)\n");
@@ -1533,14 +1546,14 @@ int vidioc_encoder_cmd(struct file *file, void *priv,
 
 		spin_lock_irqsave(&dev->irqlock, flags);
 		if (list_empty(&ctx->src_queue)) {
-			mfc_debug(2, "EOS: empty src queue, entering finishing state");
+			mfc_debug(2, "EOS: empty src queue, entering finishing state\n");
 			ctx->state = MFCINST_FINISHING;
 			if (s5p_mfc_ctx_ready(ctx))
 				set_work_bit_irqsave(ctx);
 			spin_unlock_irqrestore(&dev->irqlock, flags);
 			s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
 		} else {
-			mfc_debug(2, "EOS: marking last buffer of stream");
+			mfc_debug(2, "EOS: marking last buffer of stream\n");
 			buf = list_entry(ctx->src_queue.prev,
 						struct s5p_mfc_buf, list);
 			if (buf->flags & MFC_BUF_FLAG_USED)
@@ -1609,9 +1622,9 @@ static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb)
 			mfc_err("failed to get plane cookie\n");
 			return -EINVAL;
 		}
-		mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx",
-				vb->v4l2_buf.index, i,
-				vb2_dma_contig_plane_dma_addr(vb, i));
+		mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx\n",
+			  vb->v4l2_buf.index, i,
+			  vb2_dma_contig_plane_dma_addr(vb, i));
 	}
 	return 0;
 }
@@ -1760,11 +1773,27 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
 	struct s5p_mfc_dev *dev = ctx->dev;
 
-	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+	if (IS_MFCV6(dev) && (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)) {
+
+		if ((ctx->state == MFCINST_GOT_INST) &&
+			(dev->curr_ctx == ctx->num) && dev->hw_lock) {
+			s5p_mfc_wait_for_done_ctx(ctx,
+						S5P_MFC_R2H_CMD_SEQ_DONE_RET,
+						0);
+		}
+
+		if (ctx->src_bufs_cnt < ctx->pb_count) {
+			mfc_err("Need minimum %d OUTPUT buffers\n",
+					ctx->pb_count);
+			return -EINVAL;
+		}
+	}
+
 	/* If context is ready then dev = work->data;schedule it to run */
 	if (s5p_mfc_ctx_ready(ctx))
 		set_work_bit_irqsave(ctx);
 	s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
+
 	return 0;
 }
 
@@ -1920,6 +1949,7 @@ int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx)
 		if (controls[i].is_volatile && ctx->ctrls[i])
 			ctx->ctrls[i]->flags |= V4L2_CTRL_FLAG_VOLATILE;
 	}
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
 	return 0;
 }
 

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c

@@ -1275,8 +1275,8 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
 	s5p_mfc_clean_ctx_int_flags(ctx);
-	mfc_debug(2, "encoding buffer with index=%d state=%d",
-			src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state);
+	mfc_debug(2, "encoding buffer with index=%d state=%d\n",
+		  src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state);
 	s5p_mfc_encode_one_frame_v5(ctx);
 	return 0;
 }

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c

@@ -62,12 +62,6 @@ static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx)
 	/* NOP */
 }
 
-static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev)
-{
-	/* NOP */
-	return -1;
-}
-
 /* Allocate codec buffers */
 static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
 {
@@ -167,7 +161,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
 				S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
 		ctx->bank1.size =
 			ctx->scratch_buf_size + ctx->tmv_buffer_size +
-			(ctx->dpb_count * (ctx->luma_dpb_size +
+			(ctx->pb_count * (ctx->luma_dpb_size +
 			ctx->chroma_dpb_size + ctx->me_buffer_size));
 		ctx->bank2.size = 0;
 		break;
@@ -181,7 +175,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
 				S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
 		ctx->bank1.size =
 			ctx->scratch_buf_size + ctx->tmv_buffer_size +
-			(ctx->dpb_count * (ctx->luma_dpb_size +
+			(ctx->pb_count * (ctx->luma_dpb_size +
 			ctx->chroma_dpb_size + ctx->me_buffer_size));
 		ctx->bank2.size = 0;
 		break;
@@ -198,7 +192,6 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
 		}
 		BUG_ON(ctx->bank1.dma & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
 	}
-
 	return 0;
 }
 
@@ -449,8 +442,8 @@ static int s5p_mfc_set_enc_stream_buffer_v6(struct s5p_mfc_ctx *ctx,
 	WRITEL(addr, S5P_FIMV_E_STREAM_BUFFER_ADDR_V6); /* 16B align */
 	WRITEL(size, S5P_FIMV_E_STREAM_BUFFER_SIZE_V6);
 
-	mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d",
-		addr, size);
+	mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d\n",
+		  addr, size);
 
 	return 0;
 }
@@ -463,8 +456,8 @@ static void s5p_mfc_set_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx,
 	WRITEL(y_addr, S5P_FIMV_E_SOURCE_LUMA_ADDR_V6); /* 256B align */
 	WRITEL(c_addr, S5P_FIMV_E_SOURCE_CHROMA_ADDR_V6);
 
-	mfc_debug(2, "enc src y buf addr: 0x%08lx", y_addr);
-	mfc_debug(2, "enc src c buf addr: 0x%08lx", c_addr);
+	mfc_debug(2, "enc src y buf addr: 0x%08lx\n", y_addr);
+	mfc_debug(2, "enc src c buf addr: 0x%08lx\n", c_addr);
 }
 
 static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx,
@@ -479,8 +472,8 @@ static void s5p_mfc_get_enc_frame_buffer_v6(struct s5p_mfc_ctx *ctx,
 	enc_recon_y_addr = READL(S5P_FIMV_E_RECON_LUMA_DPB_ADDR_V6);
 	enc_recon_c_addr = READL(S5P_FIMV_E_RECON_CHROMA_DPB_ADDR_V6);
 
-	mfc_debug(2, "recon y addr: 0x%08lx", enc_recon_y_addr);
-	mfc_debug(2, "recon c addr: 0x%08lx", enc_recon_c_addr);
+	mfc_debug(2, "recon y addr: 0x%08lx\n", enc_recon_y_addr);
+	mfc_debug(2, "recon c addr: 0x%08lx\n", enc_recon_c_addr);
 }
 
 /* Set encoding ref & codec buffer */
@@ -497,7 +490,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx)
 
 	mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1);
 
-	for (i = 0; i < ctx->dpb_count; i++) {
+	for (i = 0; i < ctx->pb_count; i++) {
 		WRITEL(buf_addr1, S5P_FIMV_E_LUMA_DPB_V6 + (4 * i));
 		buf_addr1 += ctx->luma_dpb_size;
 		WRITEL(buf_addr1, S5P_FIMV_E_CHROMA_DPB_V6 + (4 * i));
@@ -520,7 +513,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx)
 	buf_size1 -= ctx->tmv_buffer_size;
 
 	mfc_debug(2, "Buf1: %u, buf_size1: %d (ref frames %d)\n",
-			buf_addr1, buf_size1, ctx->dpb_count);
+			buf_addr1, buf_size1, ctx->pb_count);
 	if (buf_size1 < 0) {
 		mfc_debug(2, "Not enough memory has been allocated.\n");
 		return -ENOMEM;
@@ -1431,8 +1424,8 @@ static inline int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
 	src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0);
 	src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1);
 
-	mfc_debug(2, "enc src y addr: 0x%08lx", src_y_addr);
-	mfc_debug(2, "enc src c addr: 0x%08lx", src_c_addr);
+	mfc_debug(2, "enc src y addr: 0x%08lx\n", src_y_addr);
+	mfc_debug(2, "enc src c addr: 0x%08lx\n", src_c_addr);
 
 	s5p_mfc_set_enc_frame_buffer_v6(ctx, src_y_addr, src_c_addr);
 
@@ -1522,22 +1515,6 @@ static inline int s5p_mfc_run_init_enc_buffers(struct s5p_mfc_ctx *ctx)
 	struct s5p_mfc_dev *dev = ctx->dev;
 	int ret;
 
-	ret = s5p_mfc_alloc_codec_buffers_v6(ctx);
-	if (ret) {
-		mfc_err("Failed to allocate encoding buffers.\n");
-		return -ENOMEM;
-	}
-
-	/* Header was generated now starting processing
-	 * First set the reference frame buffers
-	 */
-	if (ctx->capture_state != QUEUE_BUFS_REQUESTED) {
-		mfc_err("It seems that destionation buffers were not\n"
-			"requested.MFC requires that header should be generated\n"
-			"before allocating codec buffer.\n");
-		return -EAGAIN;
-	}
-
 	dev->curr_ctx = ctx->num;
 	s5p_mfc_clean_ctx_int_flags(ctx);
 	ret = s5p_mfc_set_enc_ref_buffer_v6(ctx);
@@ -1582,7 +1559,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
 	mfc_debug(1, "Seting new context to %p\n", ctx);
 	/* Got context to run in ctx */
 	mfc_debug(1, "ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n",
-		ctx->dst_queue_cnt, ctx->dpb_count, ctx->src_queue_cnt);
+		ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt);
 	mfc_debug(1, "ctx->state=%d\n", ctx->state);
 	/* Last frame has already been sent to MFC
 	 * Now obtaining frames from MFC buffer */
@@ -1647,7 +1624,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
 		case MFCINST_GOT_INST:
 			s5p_mfc_run_init_enc(ctx);
 			break;
-		case MFCINST_HEAD_PARSED: /* Only for MFC6.x */
+		case MFCINST_HEAD_PRODUCED:
 			ret = s5p_mfc_run_init_enc_buffers(ctx);
 			break;
 		default:
@@ -1730,7 +1707,7 @@ static int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev)
 	return mfc_read(dev, S5P_FIMV_D_DISPLAY_STATUS_V6);
 }
 
-static int s5p_mfc_get_decoded_status_v6(struct s5p_mfc_dev *dev)
+static int s5p_mfc_get_dec_status_v6(struct s5p_mfc_dev *dev)
 {
 	return mfc_read(dev, S5P_FIMV_D_DECODED_STATUS_V6);
 }

drivers/media/platform/s5p-mfc/s5p_mfc_pm.c

@@ -50,19 +50,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
 		goto err_p_ip_clk;
 	}
 
-	pm->clock = clk_get(&dev->plat_dev->dev, dev->variant->mclk_name);
-	if (IS_ERR(pm->clock)) {
-		mfc_err("Failed to get MFC clock\n");
-		ret = PTR_ERR(pm->clock);
-		goto err_g_ip_clk_2;
-	}
-
-	ret = clk_prepare(pm->clock);
-	if (ret) {
-		mfc_err("Failed to prepare MFC clock\n");
-		goto err_p_ip_clk_2;
-	}
-
 	atomic_set(&pm->power, 0);
 #ifdef CONFIG_PM_RUNTIME
 	pm->device = &dev->plat_dev->dev;
@@ -72,10 +59,6 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
 	atomic_set(&clk_ref, 0);
 #endif
 	return 0;
-err_p_ip_clk_2:
-	clk_put(pm->clock);
-err_g_ip_clk_2:
-	clk_unprepare(pm->clock_gate);
 err_p_ip_clk:
 	clk_put(pm->clock_gate);
 err_g_ip_clk:
@@ -86,8 +69,6 @@ void s5p_mfc_final_pm(struct s5p_mfc_dev *dev)
 {
 	clk_unprepare(pm->clock_gate);
 	clk_put(pm->clock_gate);
-	clk_unprepare(pm->clock);
-	clk_put(pm->clock);
 #ifdef CONFIG_PM_RUNTIME
 	pm_runtime_disable(pm->device);
 #endif
@@ -98,7 +79,7 @@ int s5p_mfc_clock_on(void)
 	int ret;
 #ifdef CLK_DEBUG
 	atomic_inc(&clk_ref);
-	mfc_debug(3, "+ %d", atomic_read(&clk_ref));
+	mfc_debug(3, "+ %d\n", atomic_read(&clk_ref));
 #endif
 	ret = clk_enable(pm->clock_gate);
 	return ret;
@@ -108,7 +89,7 @@ void s5p_mfc_clock_off(void)
 {
 #ifdef CLK_DEBUG
 	atomic_dec(&clk_ref);
-	mfc_debug(3, "- %d", atomic_read(&clk_ref));
+	mfc_debug(3, "- %d\n", atomic_read(&clk_ref));
 #endif
 	clk_disable(pm->clock_gate);
 }

drivers/media/platform/sh_veu.c

@@ -905,11 +905,11 @@ static int sh_veu_queue_setup(struct vb2_queue *vq,
 		if (ftmp.fmt.pix.width != pix->width ||
 		    ftmp.fmt.pix.height != pix->height)
 			return -EINVAL;
-		size = pix->bytesperline ? pix->bytesperline * pix->height :
-			pix->width * pix->height * fmt->depth >> 3;
+		size = pix->bytesperline ? pix->bytesperline * pix->height * fmt->depth / fmt->ydepth :
+			pix->width * pix->height * fmt->depth / fmt->ydepth;
 	} else {
 		vfmt = sh_veu_get_vfmt(veu, vq->type);
-		size = vfmt->bytesperline * vfmt->frame.height;
+		size = vfmt->bytesperline * vfmt->frame.height * vfmt->fmt->depth / vfmt->fmt->ydepth;
 	}
 
 	if (count < 2)
@@ -1033,8 +1033,6 @@ static int sh_veu_release(struct file *file)
 
 	dev_dbg(veu->dev, "Releasing instance %p\n", veu_file);
 
-	pm_runtime_put(veu->dev);
-
 	if (veu_file == veu->capture) {
 		veu->capture = NULL;
 		vb2_queue_release(v4l2_m2m_get_vq(veu->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE));
@@ -1050,6 +1048,8 @@ static int sh_veu_release(struct file *file)
 		veu->m2m_ctx = NULL;
 	}
 
+	pm_runtime_put(veu->dev);
+
 	kfree(veu_file);
 
 	return 0;
@@ -1138,10 +1138,7 @@ static irqreturn_t sh_veu_isr(int irq, void *dev_id)
 
 	veu->xaction++;
 
-	if (!veu->aborting)
-		return IRQ_WAKE_THREAD;
-
-	return IRQ_HANDLED;
+	return IRQ_WAKE_THREAD;
 }
 
 static int sh_veu_probe(struct platform_device *pdev)

drivers/media/platform/soc_camera/soc_camera.c

@@ -643,9 +643,9 @@ static int soc_camera_close(struct file *file)
 
 		if (ici->ops->init_videobuf2)
 			vb2_queue_release(&icd->vb2_vidq);
-		ici->ops->remove(icd);
-
 		__soc_camera_power_off(icd);
+
+		ici->ops->remove(icd);
 	}
 
 	if (icd->streamer == file)

drivers/media/radio/Kconfig

@@ -22,6 +22,7 @@ config RADIO_SI476X
 	tristate "Silicon Laboratories Si476x I2C FM Radio"
 	depends on I2C && VIDEO_V4L2
 	depends on MFD_SI476X_CORE
+	depends on SND_SOC
 	select SND_SOC_SI476X
 	---help---
 	  Choose Y here if you have this FM radio chip.

drivers/media/radio/radio-si476x.c

@@ -44,7 +44,7 @@
 
 #define FREQ_MUL (10000000 / 625)
 
-#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0b10000000 & (status))
+#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0x80 & (status))
 
 #define DRIVER_NAME "si476x-radio"
 #define DRIVER_CARD "SI476x AM/FM Receiver"

drivers/media/usb/gspca/sonixb.c

@@ -1159,6 +1159,13 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			regs[0x01] = 0x44; /* Select 24 Mhz clock */
 			regs[0x12] = 0x02; /* Set hstart to 2 */
 		}
+		break;
+	case SENSOR_PAS202:
+		/* For some unknown reason we need to increase hstart by 1 on
+		   the sn9c103, otherwise we get wrong colors (bayer shift). */
+		if (sd->bridge == BRIDGE_103)
+			regs[0x12] += 1;
+		break;
 	}
 	/* Disable compression when the raw bayer format has been selected */
 	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)

drivers/media/usb/pwc/pwc.h

@@ -226,7 +226,7 @@ struct pwc_device
 	struct list_head queued_bufs;
 	spinlock_t queued_bufs_lock; /* Protects queued_bufs */
 
-	/* Note if taking both locks v4l2_lock must always be locked first! */
+	/* If taking both locks vb_queue_lock must always be locked first! */
 	struct mutex v4l2_lock;      /* Protects everything else */
 	struct mutex vb_queue_lock;  /* Protects vb_queue and capt_file */
 

drivers/media/v4l2-core/v4l2-ctrls.c

@@ -1835,6 +1835,8 @@ bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl)
 {
 	if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_TX)
 		return true;
+	if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_RX)
+		return true;
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
 	case V4L2_CID_AUDIO_VOLUME:

drivers/media/v4l2-core/v4l2-ioctl.c

@@ -243,7 +243,6 @@ static void v4l_print_format(const void *arg, bool write_only)
 	const struct v4l2_vbi_format *vbi;
 	const struct v4l2_sliced_vbi_format *sliced;
 	const struct v4l2_window *win;
-	const struct v4l2_clip *clip;
 	unsigned i;
 
 	pr_cont("type=%s", prt_names(p->type, v4l2_type_names));
@@ -253,7 +252,7 @@ static void v4l_print_format(const void *arg, bool write_only)
 		pix = &p->fmt.pix;
 		pr_cont(", width=%u, height=%u, "
 			"pixelformat=%c%c%c%c, field=%s, "
-			"bytesperline=%u sizeimage=%u, colorspace=%d\n",
+			"bytesperline=%u, sizeimage=%u, colorspace=%d\n",
 			pix->width, pix->height,
 			(pix->pixelformat & 0xff),
 			(pix->pixelformat >>  8) & 0xff,
@@ -284,20 +283,14 @@ static void v4l_print_format(const void *arg, bool write_only)
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		win = &p->fmt.win;
-		pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, "
-			"chromakey=0x%08x, bitmap=%p, "
-			"global_alpha=0x%02x\n",
-			win->w.width, win->w.height,
-			win->w.left, win->w.top,
+		/* Note: we can't print the clip list here since the clips
+		 * pointer is a userspace pointer, not a kernelspace
+		 * pointer. */
+		pr_cont(", wxh=%dx%d, x,y=%d,%d, field=%s, chromakey=0x%08x, clipcount=%u, clips=%p, bitmap=%p, global_alpha=0x%02x\n",
+			win->w.width, win->w.height, win->w.left, win->w.top,
 			prt_names(win->field, v4l2_field_names),
-			win->chromakey, win->bitmap, win->global_alpha);
-		clip = win->clips;
-		for (i = 0; i < win->clipcount; i++) {
-			printk(KERN_DEBUG "clip %u: wxh=%dx%d, x,y=%d,%d\n",
-					i, clip->c.width, clip->c.height,
-					clip->c.left, clip->c.top);
-			clip = clip->next;
-		}
+			win->chromakey, win->clipcount, win->clips,
+			win->bitmap, win->global_alpha);
 		break;
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
@@ -332,7 +325,7 @@ static void v4l_print_framebuffer(const void *arg, bool write_only)
 
 	pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, "
 		"height=%u, pixelformat=%c%c%c%c, "
-		"bytesperline=%u sizeimage=%u, colorspace=%d\n",
+		"bytesperline=%u, sizeimage=%u, colorspace=%d\n",
 			p->capability, p->flags, p->base,
 			p->fmt.width, p->fmt.height,
 			(p->fmt.pixelformat & 0xff),
@@ -353,7 +346,7 @@ static void v4l_print_modulator(const void *arg, bool write_only)
 	const struct v4l2_modulator *p = arg;
 
 	if (write_only)
-		pr_cont("index=%u, txsubchans=0x%x", p->index, p->txsubchans);
+		pr_cont("index=%u, txsubchans=0x%x\n", p->index, p->txsubchans);
 	else
 		pr_cont("index=%u, name=%.*s, capability=0x%x, "
 			"rangelow=%u, rangehigh=%u, txsubchans=0x%x\n",
@@ -445,13 +438,13 @@ static void v4l_print_buffer(const void *arg, bool write_only)
 		for (i = 0; i < p->length; ++i) {
 			plane = &p->m.planes[i];
 			printk(KERN_DEBUG
-				"plane %d: bytesused=%d, data_offset=0x%08x "
+				"plane %d: bytesused=%d, data_offset=0x%08x, "
 				"offset/userptr=0x%lx, length=%d\n",
 				i, plane->bytesused, plane->data_offset,
 				plane->m.userptr, plane->length);
 		}
 	} else {
-		pr_cont("bytesused=%d, offset/userptr=0x%lx, length=%d\n",
+		pr_cont(", bytesused=%d, offset/userptr=0x%lx, length=%d\n",
 			p->bytesused, p->m.userptr, p->length);
 	}
 
@@ -504,6 +497,8 @@ static void v4l_print_streamparm(const void *arg, bool write_only)
 			c->capability, c->outputmode,
 			c->timeperframe.numerator, c->timeperframe.denominator,
 			c->extendedmode, c->writebuffers);
+	} else {
+		pr_cont("\n");
 	}
 }
 
@@ -734,11 +729,11 @@ static void v4l_print_frmsizeenum(const void *arg, bool write_only)
 			p->type);
 	switch (p->type) {
 	case V4L2_FRMSIZE_TYPE_DISCRETE:
-		pr_cont(" wxh=%ux%u\n",
+		pr_cont(", wxh=%ux%u\n",
 			p->discrete.width, p->discrete.height);
 		break;
 	case V4L2_FRMSIZE_TYPE_STEPWISE:
-		pr_cont(" min=%ux%u, max=%ux%u, step=%ux%u\n",
+		pr_cont(", min=%ux%u, max=%ux%u, step=%ux%u\n",
 				p->stepwise.min_width,  p->stepwise.min_height,
 				p->stepwise.step_width, p->stepwise.step_height,
 				p->stepwise.max_width,  p->stepwise.max_height);
@@ -764,12 +759,12 @@ static void v4l_print_frmivalenum(const void *arg, bool write_only)
 			p->width, p->height, p->type);
 	switch (p->type) {
 	case V4L2_FRMIVAL_TYPE_DISCRETE:
-		pr_cont(" fps=%d/%d\n",
+		pr_cont(", fps=%d/%d\n",
 				p->discrete.numerator,
 				p->discrete.denominator);
 		break;
 	case V4L2_FRMIVAL_TYPE_STEPWISE:
-		pr_cont(" min=%d/%d, max=%d/%d, step=%d/%d\n",
+		pr_cont(", min=%d/%d, max=%d/%d, step=%d/%d\n",
 				p->stepwise.min.numerator,
 				p->stepwise.min.denominator,
 				p->stepwise.max.numerator,
@@ -807,8 +802,8 @@ static void v4l_print_event(const void *arg, bool write_only)
 			pr_cont("value64=%lld, ", c->value64);
 		else
 			pr_cont("value=%d, ", c->value);
-		pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d,"
-				" default_value=%d\n",
+		pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, "
+			"default_value=%d\n",
 			c->flags, c->minimum, c->maximum,
 			c->step, c->default_value);
 		break;
@@ -845,7 +840,7 @@ static void v4l_print_freq_band(const void *arg, bool write_only)
 	const struct v4l2_frequency_band *p = arg;
 
 	pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, "
-			"rangelow=%u, rangehigh=%u, modulation=0x%x\n",
+		"rangelow=%u, rangehigh=%u, modulation=0x%x\n",
 			p->tuner, p->type, p->index,
 			p->capability, p->rangelow,
 			p->rangehigh, p->modulation);

drivers/media/v4l2-core/v4l2-mem2mem.c

@@ -205,7 +205,7 @@ static void v4l2_m2m_try_run(struct v4l2_m2m_dev *m2m_dev)
 static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx)
 {
 	struct v4l2_m2m_dev *m2m_dev;
-	unsigned long flags_job, flags;
+	unsigned long flags_job, flags_out, flags_cap;
 
 	m2m_dev = m2m_ctx->m2m_dev;
 	dprintk("Trying to schedule a job for m2m_ctx: %p\n", m2m_ctx);
@@ -223,23 +223,26 @@ static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx)
 		return;
 	}
 
-	spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+	spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out);
 	if (list_empty(&m2m_ctx->out_q_ctx.rdy_queue)) {
-		spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+		spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock,
+					flags_out);
 		spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job);
 		dprintk("No input buffers available\n");
 		return;
 	}
-	spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags);
+	spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap);
 	if (list_empty(&m2m_ctx->cap_q_ctx.rdy_queue)) {
-		spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags);
-		spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+		spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock,
+					flags_cap);
+		spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock,
+					flags_out);
 		spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job);
 		dprintk("No output buffers available\n");
 		return;
 	}
-	spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags);
-	spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+	spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap);
+	spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out);
 
 	if (m2m_dev->m2m_ops->job_ready
 		&& (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) {
@@ -371,6 +374,20 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
 }
 EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf);
 
+/**
+ * v4l2_m2m_create_bufs() - create a source or destination buffer, depending
+ * on the type
+ */
+int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+			 struct v4l2_create_buffers *create)
+{
+	struct vb2_queue *vq;
+
+	vq = v4l2_m2m_get_vq(m2m_ctx, create->format.type);
+	return vb2_create_bufs(vq, create);
+}
+EXPORT_SYMBOL_GPL(v4l2_m2m_create_bufs);
+
 /**
  * v4l2_m2m_expbuf() - export a source or destination buffer, depending on
  * the type
@@ -486,8 +503,10 @@ unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
 	if (m2m_ctx->m2m_dev->m2m_ops->unlock)
 		m2m_ctx->m2m_dev->m2m_ops->unlock(m2m_ctx->priv);
 
-	poll_wait(file, &src_q->done_wq, wait);
-	poll_wait(file, &dst_q->done_wq, wait);
+	if (list_empty(&src_q->done_list))
+		poll_wait(file, &src_q->done_wq, wait);
+	if (list_empty(&dst_q->done_list))
+		poll_wait(file, &dst_q->done_wq, wait);
 
 	if (m2m_ctx->m2m_dev->m2m_ops->lock)
 		m2m_ctx->m2m_dev->m2m_ops->lock(m2m_ctx->priv);

drivers/media/v4l2-core/videobuf2-core.c

@@ -2014,7 +2014,8 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 	if (list_empty(&q->queued_list))
 		return res | POLLERR;
 
-	poll_wait(file, &q->done_wq, wait);
+	if (list_empty(&q->done_list))
+		poll_wait(file, &q->done_wq, wait);
 
 	/*
 	 * Take first buffer available for dequeuing.

drivers/staging/media/davinci_vpfe/Kconfig

 config VIDEO_DM365_VPFE
 	tristate "DM365 VPFE Media Controller Capture Driver"
-	depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_VPFE_CAPTURE
+	depends on VIDEO_V4L2 && ARCH_DAVINCI_DM365 && !VIDEO_DM365_ISIF
 	select VIDEOBUF2_DMA_CONTIG
 	help
 	  Support for DM365 VPFE based Media Controller Capture driver.

drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c

@@ -639,7 +639,8 @@ static int vpfe_probe(struct platform_device *pdev)
 	if (ret)
 		goto probe_free_dev_mem;
 
-	if (vpfe_initialize_modules(vpfe_dev, pdev))
+	ret = vpfe_initialize_modules(vpfe_dev, pdev);
+	if (ret)
 		goto probe_disable_clock;
 
 	vpfe_dev->media_dev.dev = vpfe_dev->pdev;
@@ -663,7 +664,8 @@ static int vpfe_probe(struct platform_device *pdev)
 	/* set the driver data in platform device */
 	platform_set_drvdata(pdev, vpfe_dev);
 	/* register subdevs/entities */
-	if (vpfe_register_entities(vpfe_dev))
+	ret = vpfe_register_entities(vpfe_dev);
+	if (ret)
 		goto probe_out_v4l2_unregister;
 
 	ret = vpfe_attach_irq(vpfe_dev);

drivers/staging/media/solo6x10/Kconfig

@@ -5,6 +5,7 @@ config SOLO6X10
 	select VIDEOBUF2_DMA_SG
 	select VIDEOBUF2_DMA_CONTIG
 	select SND_PCM
+	select FONT_8x16
 	---help---
 	  This driver supports the Softlogic based MPEG-4 and h.264 codec
 	  cards.

include/media/v4l2-mem2mem.h

@@ -110,6 +110,8 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
 		  struct v4l2_buffer *buf);
 int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
 		   struct v4l2_buffer *buf);
+int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+			 struct v4l2_create_buffers *create);
 
 int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
 		   struct v4l2_exportbuffer *eb);