Commit ab54ee80 authored by Heiko Carstens's avatar Heiko Carstens Committed by David S. Miller

atm/iphase: rename fregt_t -> ffreg_t

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: default avatarchas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9c79330d
...@@ -636,81 +636,81 @@ struct rx_buf_desc { ...@@ -636,81 +636,81 @@ struct rx_buf_desc {
#define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE #define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE
#define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE #define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE
typedef volatile u_int freg_t; typedef volatile u_int ffreg_t;
typedef u_int rreg_t; typedef u_int rreg_t;
typedef struct _ffredn_t { typedef struct _ffredn_t {
freg_t idlehead_high; /* Idle cell header (high) */ ffreg_t idlehead_high; /* Idle cell header (high) */
freg_t idlehead_low; /* Idle cell header (low) */ ffreg_t idlehead_low; /* Idle cell header (low) */
freg_t maxrate; /* Maximum rate */ ffreg_t maxrate; /* Maximum rate */
freg_t stparms; /* Traffic Management Parameters */ ffreg_t stparms; /* Traffic Management Parameters */
freg_t abrubr_abr; /* ABRUBR Priority Byte 1, TCR Byte 0 */ ffreg_t abrubr_abr; /* ABRUBR Priority Byte 1, TCR Byte 0 */
freg_t rm_type; /* */ ffreg_t rm_type; /* */
u_int filler5[0x17 - 0x06]; u_int filler5[0x17 - 0x06];
freg_t cmd_reg; /* Command register */ ffreg_t cmd_reg; /* Command register */
u_int filler18[0x20 - 0x18]; u_int filler18[0x20 - 0x18];
freg_t cbr_base; /* CBR Pointer Base */ ffreg_t cbr_base; /* CBR Pointer Base */
freg_t vbr_base; /* VBR Pointer Base */ ffreg_t vbr_base; /* VBR Pointer Base */
freg_t abr_base; /* ABR Pointer Base */ ffreg_t abr_base; /* ABR Pointer Base */
freg_t ubr_base; /* UBR Pointer Base */ ffreg_t ubr_base; /* UBR Pointer Base */
u_int filler24; u_int filler24;
freg_t vbrwq_base; /* VBR Wait Queue Base */ ffreg_t vbrwq_base; /* VBR Wait Queue Base */
freg_t abrwq_base; /* ABR Wait Queue Base */ ffreg_t abrwq_base; /* ABR Wait Queue Base */
freg_t ubrwq_base; /* UBR Wait Queue Base */ ffreg_t ubrwq_base; /* UBR Wait Queue Base */
freg_t vct_base; /* Main VC Table Base */ ffreg_t vct_base; /* Main VC Table Base */
freg_t vcte_base; /* Extended Main VC Table Base */ ffreg_t vcte_base; /* Extended Main VC Table Base */
u_int filler2a[0x2C - 0x2A]; u_int filler2a[0x2C - 0x2A];
freg_t cbr_tab_beg; /* CBR Table Begin */ ffreg_t cbr_tab_beg; /* CBR Table Begin */
freg_t cbr_tab_end; /* CBR Table End */ ffreg_t cbr_tab_end; /* CBR Table End */
freg_t cbr_pointer; /* CBR Pointer */ ffreg_t cbr_pointer; /* CBR Pointer */
u_int filler2f[0x30 - 0x2F]; u_int filler2f[0x30 - 0x2F];
freg_t prq_st_adr; /* Packet Ready Queue Start Address */ ffreg_t prq_st_adr; /* Packet Ready Queue Start Address */
freg_t prq_ed_adr; /* Packet Ready Queue End Address */ ffreg_t prq_ed_adr; /* Packet Ready Queue End Address */
freg_t prq_rd_ptr; /* Packet Ready Queue read pointer */ ffreg_t prq_rd_ptr; /* Packet Ready Queue read pointer */
freg_t prq_wr_ptr; /* Packet Ready Queue write pointer */ ffreg_t prq_wr_ptr; /* Packet Ready Queue write pointer */
freg_t tcq_st_adr; /* Transmit Complete Queue Start Address*/ ffreg_t tcq_st_adr; /* Transmit Complete Queue Start Address*/
freg_t tcq_ed_adr; /* Transmit Complete Queue End Address */ ffreg_t tcq_ed_adr; /* Transmit Complete Queue End Address */
freg_t tcq_rd_ptr; /* Transmit Complete Queue read pointer */ ffreg_t tcq_rd_ptr; /* Transmit Complete Queue read pointer */
freg_t tcq_wr_ptr; /* Transmit Complete Queue write pointer*/ ffreg_t tcq_wr_ptr; /* Transmit Complete Queue write pointer*/
u_int filler38[0x40 - 0x38]; u_int filler38[0x40 - 0x38];
freg_t queue_base; /* Base address for PRQ and TCQ */ ffreg_t queue_base; /* Base address for PRQ and TCQ */
freg_t desc_base; /* Base address of descriptor table */ ffreg_t desc_base; /* Base address of descriptor table */
u_int filler42[0x45 - 0x42]; u_int filler42[0x45 - 0x42];
freg_t mode_reg_0; /* Mode register 0 */ ffreg_t mode_reg_0; /* Mode register 0 */
freg_t mode_reg_1; /* Mode register 1 */ ffreg_t mode_reg_1; /* Mode register 1 */
freg_t intr_status_reg;/* Interrupt Status register */ ffreg_t intr_status_reg;/* Interrupt Status register */
freg_t mask_reg; /* Mask Register */ ffreg_t mask_reg; /* Mask Register */
freg_t cell_ctr_high1; /* Total cell transfer count (high) */ ffreg_t cell_ctr_high1; /* Total cell transfer count (high) */
freg_t cell_ctr_lo1; /* Total cell transfer count (low) */ ffreg_t cell_ctr_lo1; /* Total cell transfer count (low) */
freg_t state_reg; /* Status register */ ffreg_t state_reg; /* Status register */
u_int filler4c[0x58 - 0x4c]; u_int filler4c[0x58 - 0x4c];
freg_t curr_desc_num; /* Contains the current descriptor num */ ffreg_t curr_desc_num; /* Contains the current descriptor num */
freg_t next_desc; /* Next descriptor */ ffreg_t next_desc; /* Next descriptor */
freg_t next_vc; /* Next VC */ ffreg_t next_vc; /* Next VC */
u_int filler5b[0x5d - 0x5b]; u_int filler5b[0x5d - 0x5b];
freg_t present_slot_cnt;/* Present slot count */ ffreg_t present_slot_cnt;/* Present slot count */
u_int filler5e[0x6a - 0x5e]; u_int filler5e[0x6a - 0x5e];
freg_t new_desc_num; /* New descriptor number */ ffreg_t new_desc_num; /* New descriptor number */
freg_t new_vc; /* New VC */ ffreg_t new_vc; /* New VC */
freg_t sched_tbl_ptr; /* Schedule table pointer */ ffreg_t sched_tbl_ptr; /* Schedule table pointer */
freg_t vbrwq_wptr; /* VBR wait queue write pointer */ ffreg_t vbrwq_wptr; /* VBR wait queue write pointer */
freg_t vbrwq_rptr; /* VBR wait queue read pointer */ ffreg_t vbrwq_rptr; /* VBR wait queue read pointer */
freg_t abrwq_wptr; /* ABR wait queue write pointer */ ffreg_t abrwq_wptr; /* ABR wait queue write pointer */
freg_t abrwq_rptr; /* ABR wait queue read pointer */ ffreg_t abrwq_rptr; /* ABR wait queue read pointer */
freg_t ubrwq_wptr; /* UBR wait queue write pointer */ ffreg_t ubrwq_wptr; /* UBR wait queue write pointer */
freg_t ubrwq_rptr; /* UBR wait queue read pointer */ ffreg_t ubrwq_rptr; /* UBR wait queue read pointer */
freg_t cbr_vc; /* CBR VC */ ffreg_t cbr_vc; /* CBR VC */
freg_t vbr_sb_vc; /* VBR SB VC */ ffreg_t vbr_sb_vc; /* VBR SB VC */
freg_t abr_sb_vc; /* ABR SB VC */ ffreg_t abr_sb_vc; /* ABR SB VC */
freg_t ubr_sb_vc; /* UBR SB VC */ ffreg_t ubr_sb_vc; /* UBR SB VC */
freg_t vbr_next_link; /* VBR next link */ ffreg_t vbr_next_link; /* VBR next link */
freg_t abr_next_link; /* ABR next link */ ffreg_t abr_next_link; /* ABR next link */
freg_t ubr_next_link; /* UBR next link */ ffreg_t ubr_next_link; /* UBR next link */
u_int filler7a[0x7c-0x7a]; u_int filler7a[0x7c-0x7a];
freg_t out_rate_head; /* Out of rate head */ ffreg_t out_rate_head; /* Out of rate head */
u_int filler7d[0xca-0x7d]; /* pad out to full address space */ u_int filler7d[0xca-0x7d]; /* pad out to full address space */
freg_t cell_ctr_high1_nc;/* Total cell transfer count (high) */ ffreg_t cell_ctr_high1_nc;/* Total cell transfer count (high) */
freg_t cell_ctr_lo1_nc;/* Total cell transfer count (low) */ ffreg_t cell_ctr_lo1_nc;/* Total cell transfer count (low) */
u_int fillercc[0x100-0xcc]; /* pad out to full address space */ u_int fillercc[0x100-0xcc]; /* pad out to full address space */
} ffredn_t; } ffredn_t;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment