Commit ab6f24b4 authored by Douglas Anderson's avatar Douglas Anderson

arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip

Putting the panel under the bridge chip (under the aux-bus node)
allows the panel driver to get access to the DP AUX bus, enabling all
sorts of fabulous new features.

While we're at this, get rid of a level of hierarchy for the panel
node. It doesn't need "ports / port" and can just have a "port" child.

For Linux, this patch has a hard requirement on the patches adding DP
AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid
parent 4c1b3d94
......@@ -260,21 +260,6 @@ max98357a: audio-codec-0 {
#sound-dai-cells = <0>;
};
panel: panel {
/* Compatible will be filled in per-board */
power-supply = <&pp3300_dx_edp>;
backlight = <&backlight>;
hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
ports {
port {
panel_in_edp: endpoint {
remote-endpoint = <&sn65dsi86_out>;
};
};
};
};
pwmleds {
compatible = "pwm-leds";
keyboard_backlight: keyboard-backlight {
......@@ -674,6 +659,21 @@ sn65dsi86_out: endpoint {
};
};
};
aux-bus {
panel: panel {
/* Compatible will be filled in per-board */
power-supply = <&pp3300_dx_edp>;
backlight = <&backlight>;
hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
port {
panel_in_edp: endpoint {
remote-endpoint = <&sn65dsi86_out>;
};
};
};
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment