Merge bk://linux-scsi.bkbits.net/scsi-for-linus-2.6

into ppc970.osdl.org:/home/torvalds/v2.5/linux

Documentation/scsi/st.txt

@@ -2,7 +2,7 @@ This file contains brief information about the SCSI tape driver.
 The driver is currently maintained by Kai Mäkisara (email
 Kai.Makisara@kolumbus.fi)
 
-Last modified: Thu Feb 19 21:57:30 2004 by makisara
+Last modified: Wed Feb 25 14:09:08 2004 by makisara
 
 
 BASICS
@@ -36,8 +36,9 @@ The user can override the parameters defined by the system
 manager. The changes persist until the defaults again come into
 effect.
 
-3. Up to four modes can be defined and selected using the minor number
-(bits 5 and 6). Mode 0 corresponds to the defaults discussed
+3. By default, up to four modes can be defined and selected using the minor
+number (bits 5 and 6). The number of modes can be changed by changing
+ST_NBR_MODE_BITS in st.h. Mode 0 corresponds to the defaults discussed
 above. Additional modes are dormant until they are defined by the
 system manager (root). When specification of a new mode is started,
 the configuration of mode 0 is used to provide a starting point for
@@ -107,7 +108,7 @@ The minor numbers consist of the following bit fields:
 dev_upper non-rew mode dev-lower
   20 -  8     7    6 5  4      0
 The non-rewind bit is always bit 7 (the uppermost bit in the lowermost
-byte). The bits defining the mode are next to the non-rewind bits. The
+byte). The bits defining the mode are below the non-rewind bit. The
 remaining bits define the tape device number. This numbering is
 backward compatible with the numbering used when the minor number was
 only 8 bits wide.
@@ -117,10 +118,10 @@ SYSFS SUPPORT
 
 The driver creates the directory /sys/class/scsi_tape and populates it with
 directories corresponding to the existing tape devices. There are autorewind
-and non-rewind entries for each mode. The names are stxmy and stxmyn, where x
-is the tape number and y is the mode. For example, the directories for the
-first tape device are (assuming four modes): st0m0  st0m0n  st0m1  st0m1n
-st0m2  st0m2n  st0m3  st0m3n.
+and non-rewind entries for each mode. The names are stxy and nstxy, where x
+is the tape number and y a character corresponding to the mode (none, l, m,
+a). For example, the directories for the first tape device are (assuming four
+modes): st0  nst0  st0l  nst0l  st0m  nst0m  st0a  nst0a.
 
 Each directory contains the entries: default_blksize  default_compression
 default_density  defined  dev  device  driver. The file 'defined' contains 1
@@ -130,7 +131,7 @@ file 'dev' contains the device numbers corresponding to this device. The links
 'device' and 'driver' point to the SCSI device and driver entries.
 
 A link named 'tape' is made from the SCSI device directory to the class
-directory corresponding to the mode 0 auto-rewind device (e.g., st0m0). 
+directory corresponding to the mode 0 auto-rewind device (e.g., st0). 
 
 
 BSD AND SYS V SEMANTICS

drivers/message/fusion/Kconfig

@@ -3,7 +3,7 @@ menu "Fusion MPT device support"
 
 config FUSION
 	tristate "Fusion MPT (base + ScsiHost) drivers"
-	depends on BLK_DEV_SD && PCI
+	depends on PCI
 	---help---
 	  LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
 	  provides high performance SCSI host initiator, and LAN [1] interface
@@ -14,41 +14,6 @@ config FUSION
 
 	  [1] LAN is not supported on parallel SCSI medium.
 
-	  These drivers require a Fusion MPT compatible PCI adapter installed
-	  in the host system.  MPT adapters contain specialized I/O processors
-	  to handle I/O workload, and more importantly to offload this work
-	  from the host CPU(s).
-
-	  If you have Fusion MPT hardware and want to use it, you can say
-	  Y or M here to add MPT (base + ScsiHost) drivers.
-	  <Y> = build lib (fusion), and link [static] into the kernel [2]
-	  proper
-	  <M> = compiled as [dynamic] modules [3] named: (mptbase,
-	  mptscsih)
-
-	  [2] In order enable capability to boot the linux kernel
-	  natively from a Fusion MPT target device, you MUST
-	  answer Y here! (currently requires CONFIG_BLK_DEV_SD)
-	  [3] To compile this support as modules, choose M here.
-
-	  If unsure, say N.
-
-	  If you say Y or M here you will get a choice of these
-	  additional protocol and support module options:         Module Name:
-	  <M>   Enhanced SCSI error reporting                     (isense)
-	  <M>   Fusion MPT misc device (ioctl) driver             (mptctl)
-	  <M>   Fusion MPT LAN driver                             (mptlan)
-
-	  ---
-	  Fusion MPT is trademark of LSI Logic Corporation, and its
-	  architecture is based on LSI Logic's Message Passing Interface (MPI)
-	  specification.
-
-config FUSION_BOOT
-	bool
-	depends on FUSION=y
-	default y
-
 config FUSION_MAX_SGE
 	int "Maximum number of scatter gather entries"
 	depends on FUSION
@@ -62,7 +27,6 @@ config FUSION_MAX_SGE
 	  necessary (or recommended) unless the user will be running 
 	  large I/O's via the raw interface.
 
-#  How can we force these options to module or nothing?
 config FUSION_ISENSE
 	tristate "Enhanced SCSI error reporting"
 	depends on MODULES && FUSION && m
@@ -132,17 +96,4 @@ config FUSION_LAN
 
 	  If unsure whether you really want or need this, say N.
 
-	  NOTES: This feature is NOT available nor supported for linux-2.2.x
-	  kernels.  You must be building a linux-2.3.x or linux-2.4.x kernel
-	  in order to configure this option.
-	  Support for building this feature into the linux kernel is not
-	  yet available.
-
-#  if [ "$CONFIG_FUSION_LAN" != "n" ]; then
-#    define_bool CONFIG_NET_FC y
-#  fi
-# These <should> be define_tristate, but we leave them define_bool
-# for backward compatibility with pre-linux-2.2.15 kernels.
-# (Bugzilla:fibrebugs, #384)
 endmenu
-

drivers/message/fusion/Makefile

@@ -17,10 +17,16 @@ EXTRA_CFLAGS += ${MPT_CFLAGS}
 
 # Fusion MPT drivers; recognized debug defines...
 #  MPT general:
-#EXTRA_CFLAGS += -DDEBUG
+#EXTRA_CFLAGS += -DMPT_DEBUG_SCSI
 #EXTRA_CFLAGS += -DMPT_DEBUG
 #EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME
 #EXTRA_CFLAGS += -DMPT_DEBUG_SG
+
+# This is a temporary fix for the reply/request fifo
+# for some 64bit archs. Uncommenting this line
+# will place the fifo's in 32bit space
+#EXTRA_CFLAGS += -DMPTBASE_MEM_ALLOC_FIFO_FIX
+
 #
 # driver/module specifics...
 #

drivers/message/fusion/isense.c

@@ -5,7 +5,7 @@
  *      Error Report logging output.  This module implements SCSI-3
  *      Opcode lookup and a sorted table of SCSI-3 ASC/ASCQ strings.
  *
- *  Copyright (c) 1991-2003 Steven J. Ralston
+ *  Copyright (c) 1991-2004 Steven J. Ralston
  *  Written By: Steven J. Ralston
  *  (yes I wrote some of the orig. code back in 1991!)
  *  (mailto:sjralston1@netscape.net)
@@ -66,7 +66,7 @@
 #endif
 
 #define MODULEAUTHOR "Steven J. Ralston"
-#define COPYRIGHT "Copyright (c) 2001-2003 " MODULEAUTHOR
+#define COPYRIGHT "Copyright (c) 2001-2004 " MODULEAUTHOR
 #include "mptbase.h"
 
 #include "isense.h"

drivers/message/fusion/linux_compat.h

@@ -15,25 +15,7 @@
 #define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
 #endif
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
-#define SET_NICE(current,x)	do {(current)->nice = (x);} while (0)
-#else
-#define SET_NICE(current,x)
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
-#define pci_enable_device(pdev)	(0)
-#define SCSI_DATA_UNKNOWN	0
-#define SCSI_DATA_WRITE		1
-#define SCSI_DATA_READ		2
-#define SCSI_DATA_NONE		3
-#endif
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4)
-#define pci_set_dma_mask(pdev, mask)	(0)
-#define scsi_set_pci_device(sh, pdev)	(0)
-#endif
+#define SET_NICE(current,x) do {(current)->nice = (x);} while (0)
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
 #	if LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)
@@ -147,31 +129,9 @@ typedef void (*__cleanup_module_func_t)(void);
 
 
 /* PCI/driver subsystem { */
-#if 0	/* FIXME Don't know what to use to check for the proper kernel version */
-#define DEVICE_COUNT_RESOURCE           6
-#define PCI_BASEADDR_FLAGS(idx)         base_address[idx]
-#define PCI_BASEADDR_START(idx)         base_address[idx] & ~0xFUL
-/*
- * We have to keep track of the original value using
- * a temporary, and not by just sticking pdev->base_address[x]
- * back.  pdev->base_address[x] is an opaque cookie that can
- * be used by the PCI implementation on a given Linux port
- * for any purpose. -DaveM
- */
-#define PCI_BASEADDR_SIZE(__pdev, __idx) \
-({	unsigned int size, tmp; \
-	pci_read_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), &tmp); \
-	pci_write_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), 0xffffffff); \
-	pci_read_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), &size); \
-	pci_write_config_dword(__pdev, PCI_BASE_ADDRESS_0 + (4*(__idx)), tmp); \
-	(4 - size); \
-})
-#else
 #define PCI_BASEADDR_FLAGS(idx)         resource[idx].flags
 #define PCI_BASEADDR_START(idx)         resource[idx].start
 #define PCI_BASEADDR_SIZE(dev,idx)      (dev)->resource[idx].end - (dev)->resource[idx].start + 1
-#endif		/* } ifndef 0 */
-
 
 /* Compatability for the 2.3.x PCI DMA API. */
 #ifndef PCI_DMA_BIDIRECTIONAL
@@ -227,54 +187,10 @@ static __inline__ int __get_order(unsigned long size)
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif /* PCI_DMA_BIDIRECTIONAL */
 
-/*
- *  With the new command queuing code in the SCSI mid-layer we no longer have
- *  to hold the io_request_lock spin lock when calling the scsi_done routine.
- *  For now we only do this with the 2.5.1 kernel or newer.
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,1)
-        #define MPT_HOST_LOCK(flags)
-        #define MPT_HOST_UNLOCK(flags)
-#else
-        #define MPT_HOST_LOCK(flags) \
-                spin_lock_irqsave(&io_request_lock, flags)
-        #define MPT_HOST_UNLOCK(flags) \
-                spin_unlock_irqrestore(&io_request_lock, flags)
-#endif
-
-/*
- *  We use our new error handling code if the kernel version is 2.4.18 or newer.
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,18)
-        #define MPT_SCSI_USE_NEW_EH
-#endif
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
 #define mpt_work_struct work_struct
 #define MPT_INIT_WORK(_task, _func, _data) INIT_WORK(_task, _func, _data)
-#else
-#define mpt_work_struct tq_struct
-#define MPT_INIT_WORK(_task, _func, _data) \
-({	(_task)->sync = 0; \
-	(_task)->routine = (_func); \
-	(_task)->data = (void *) (_data); \
-})
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
-#define mptscsih_sync_irq(_irq) synchronize_irq(_irq)
-#else
-#define mptscsih_sync_irq(_irq) synchronize_irq()
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,58)
-#define mpt_inc_use_count()
-#define mpt_dec_use_count()
-#else
-#define mpt_inc_use_count() MOD_INC_USE_COUNT
-#define mpt_dec_use_count() MOD_DEC_USE_COUNT
-#endif
-
+#define mpt_sync_irq(_irq) synchronize_irq(_irq)
 
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif /* _LINUX_COMPAT_H */

drivers/message/fusion/lsi/mpi_fc.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_FC.H
+ *           Name:  mpi_fc.h
  *          Title:  MPI Fibre Channel messages and structures
  *  Creation Date:  June 12, 2000
  *
- *    MPI_FC.H Version:  01.02.03
+ *    mpi_fc.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------
@@ -45,7 +45,7 @@
 
 /*****************************************************************************
 *
-*        F C    T a r g e t    M o d e    M e s s a g e s
+*        F C    D i r e c t    A c c e s s     M e s s a g e s
 *
 *****************************************************************************/
 
@@ -334,6 +334,7 @@ typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST
   FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t;
 
 #define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK       (0x01)
+#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK   (0x02)
 #define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK      (0x04)
 #define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND       (0x08)
 #define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE       (0x10)

drivers/message/fusion/lsi/mpi_inb.h

+/*
+ *  Copyright (c) 2003 LSI Logic Corporation.
+ *
+ *
+ *           Name:  mpi_inb.h
+ *          Title:  MPI Inband structures and definitions
+ *  Creation Date:  September 30, 2003
+ *
+ *    mpi_inb.h Version:  01.03.xx
+ *
+ *  Version History
+ *  ---------------
+ *
+ *  Date      Version   Description
+ *  --------  --------  ------------------------------------------------------
+ *  ??-??-??  01.03.01  Original release.
+ *  --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_INB_H
+#define MPI_INB_H
+
+/******************************************************************************
+*
+*        I n b a n d    M e s s a g e s
+*
+*******************************************************************************/
+
+
+/****************************************************************************/
+/* Inband Buffer Post Request                                               */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_BUFFER_POST_REQUEST
+{
+    U8                      Reserved1;          /* 00h */
+    U8                      BufferCount;        /* 01h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U32                     Reserved4;          /* 0Ch */
+    SGE_TRANS_SIMPLE_UNION  SGL;                /* 10h */
+} MSG_INBAND_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REQUEST,
+  MpiInbandBufferPostRequest_t , MPI_POINTER pMpiInbandBufferPostRequest_t;
+
+
+typedef struct _WWN_FC_FORMAT
+{
+    U64                     NodeName;           /* 00h */
+    U64                     PortName;           /* 08h */
+} WWN_FC_FORMAT, MPI_POINTER PTR_WWN_FC_FORMAT,
+  WwnFcFormat_t, MPI_POINTER pWwnFcFormat_t;
+
+typedef struct _WWN_SAS_FORMAT
+{
+    U64                     WorldWideID;        /* 00h */
+    U32                     Reserved1;          /* 08h */
+    U32                     Reserved2;          /* 0Ch */
+} WWN_SAS_FORMAT, MPI_POINTER PTR_WWN_SAS_FORMAT,
+  WwnSasFormat_t, MPI_POINTER pWwnSasFormat_t;
+
+typedef union _WWN_INBAND_FORMAT
+{
+    WWN_FC_FORMAT           Fc;
+    WWN_SAS_FORMAT          Sas;
+} WWN_INBAND_FORMAT, MPI_POINTER PTR_WWN_INBAND_FORMAT,
+  WwnInbandFormat, MPI_POINTER pWwnInbandFormat;
+
+
+/* Inband Buffer Post reply message */
+
+typedef struct _MSG_INBAND_BUFFER_POST_REPLY
+{
+    U16                     Reserved1;          /* 00h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U16                     Reserved4;          /* 0Ch */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+    U32                     TransferLength;     /* 14h */
+    U32                     TransactionContext; /* 18h */
+    WWN_INBAND_FORMAT       Wwn;                /* 1Ch */
+    U32                     IOCIdentifier[4];   /* 2Ch */
+} MSG_INBAND_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REPLY,
+  MpiInbandBufferPostReply_t, MPI_POINTER pMpiInbandBufferPostReply_t;
+
+
+/****************************************************************************/
+/* Inband Send Request                                                      */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_SEND_REQUEST
+{
+    U16                     Reserved1;          /* 00h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U32                     Reserved4;          /* 0Ch */
+    WWN_INBAND_FORMAT       Wwn;                /* 10h */
+    U32                     Reserved5;          /* 20h */
+    SGE_IO_UNION            SGL;                /* 24h */
+} MSG_INBAND_SEND_REQUEST, MPI_POINTER PTR_MSG_INBAND_SEND_REQUEST,
+  MpiInbandSendRequest_t , MPI_POINTER pMpiInbandSendRequest_t;
+
+
+/* Inband Send reply message */
+
+typedef struct _MSG_INBAND_SEND_REPLY
+{
+    U16                     Reserved1;          /* 00h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U16                     Reserved4;          /* 0Ch */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+    U32                     ResponseLength;     /* 14h */
+} MSG_INBAND_SEND_REPLY, MPI_POINTER PTR_MSG_INBAND_SEND_REPLY,
+  MpiInbandSendReply_t, MPI_POINTER pMpiInbandSendReply_t;
+
+
+/****************************************************************************/
+/* Inband Response Request                                                  */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_RSP_REQUEST
+{
+    U16                     Reserved1;          /* 00h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U32                     Reserved4;          /* 0Ch */
+    WWN_INBAND_FORMAT       Wwn;                /* 10h */
+    U32                     IOCIdentifier[4];   /* 20h */
+    U32                     ResponseLength;     /* 30h */
+    SGE_IO_UNION            SGL;                /* 34h */
+} MSG_INBAND_RSP_REQUEST, MPI_POINTER PTR_MSG_INBAND_RSP_REQUEST,
+  MpiInbandRspRequest_t , MPI_POINTER pMpiInbandRspRequest_t;
+
+
+/* Inband Response reply message */
+
+typedef struct _MSG_INBAND_RSP_REPLY
+{
+    U16                     Reserved1;          /* 00h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U16                     Reserved4;          /* 0Ch */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+} MSG_INBAND_RSP_REPLY, MPI_POINTER PTR_MSG_INBAND_RSP_REPLY,
+  MpiInbandRspReply_t, MPI_POINTER pMpiInbandRspReply_t;
+
+
+/****************************************************************************/
+/* Inband Abort Request                                                     */
+/****************************************************************************/
+
+typedef struct _MSG_INBAND_ABORT_REQUEST
+{
+    U8                      Reserved1;          /* 00h */
+    U8                      AbortType;          /* 01h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U32                     Reserved4;          /* 0Ch */
+    U32                     ContextToAbort;     /* 10h */
+} MSG_INBAND_ABORT_REQUEST, MPI_POINTER PTR_MSG_INBAND_ABORT_REQUEST,
+  MpiInbandAbortRequest_t , MPI_POINTER pMpiInbandAbortRequest_t;
+
+#define MPI_INBAND_ABORT_TYPE_ALL_BUFFERS       (0x00)
+#define MPI_INBAND_ABORT_TYPE_EXACT_BUFFER      (0x01)
+#define MPI_INBAND_ABORT_TYPE_SEND_REQUEST      (0x02)
+#define MPI_INBAND_ABORT_TYPE_RESPONSE_REQUEST  (0x03)
+
+
+/* Inband Abort reply message */
+
+typedef struct _MSG_INBAND_ABORT_REPLY
+{
+    U8                      Reserved1;          /* 00h */
+    U8                      AbortType;          /* 01h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U16                     Reserved4;          /* 0Ch */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+} MSG_INBAND_ABORT_REPLY, MPI_POINTER PTR_MSG_INBAND_ABORT_REPLY,
+  MpiInbandAbortReply_t, MPI_POINTER pMpiInbandAbortReply_t;
+
+
+#endif
+

drivers/message/fusion/lsi/mpi_init.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_INIT.H
+ *           Name:  mpi_init.h
  *          Title:  MPI initiator mode messages and structures
  *  Creation Date:  June 8, 2000
  *
- *    MPI_INIT.H Version:  01.02.05
+ *    mpi_init.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------
@@ -31,6 +31,8 @@
  *  10-04-01  01.02.04  Added defines for SEP request Action field.
  *  05-31-02  01.02.05  Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
  *                      for SCSI IO requests.
+ *  11-15-02  01.02.06  Added special extended SCSI Status defines for FCP.
+ *  06-26-03  01.02.07  Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
  *  --------------------------------------------------------------------------
  */
 
@@ -45,7 +47,7 @@
 *****************************************************************************/
 
 /****************************************************************************/
-/*  SCSI IO messages and assocaited structures                              */
+/*  SCSI IO messages and associated structures                              */
 /****************************************************************************/
 
 typedef struct _MSG_SCSI_IO_REQUEST
@@ -78,6 +80,16 @@ typedef struct _MSG_SCSI_IO_REQUEST
 #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST           (0x00)
 #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC            (0x02)
 #define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR  (0x04)
+#define MPI_SCSIIO_MSGFLGS_EEDP_TYPE_MASK           (0xE0)
+#define MPI_SCSIIO_MSGFLGS_EEDP_NONE                (0x00)
+#define MPI_SCSIIO_MSGFLGS_EEDP_RDPROTECT_T10       (0x20)
+#define MPI_SCSIIO_MSGFLGS_EEDP_VRPROTECT_T10       (0x40)
+#define MPI_SCSIIO_MSGFLGS_EEDP_WRPROTECT_T10       (0x60)
+#define MPI_SCSIIO_MSGFLGS_EEDP_520_READ_MODE1      (0x20)
+#define MPI_SCSIIO_MSGFLGS_EEDP_520_WRITE_MODE1     (0x40)
+#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_READ_MODE1      (0x60)
+#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_WRITE_MODE1     (0x80)
+
 
 /* SCSI IO LUN fields */
 
@@ -153,6 +165,10 @@ typedef struct _MSG_SCSI_IO_REPLY
 #define MPI_SCSI_STATUS_TASK_SET_FULL           (0x28)
 #define MPI_SCSI_STATUS_ACA_ACTIVE              (0x30)
 
+#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT    (0x80)
+#define MPI_SCSI_STATUS_FCPEXT_NO_LINK              (0x81)
+#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED           (0x82)
+
 
 /* SCSI IO Reply SCSIState values */
 
@@ -175,6 +191,33 @@ typedef struct _MSG_SCSI_IO_REPLY
 #define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE   (0x06000000)
 
 
+/****************************************************************************/
+/*  SCSI IO 32 Request message structure                                    */
+/****************************************************************************/
+
+typedef struct _MSG_SCSI_IO32_REQUEST
+{
+    U8                      TargetID;           /* 00h */
+    U8                      Bus;                /* 01h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U8                      CDBLength;          /* 04h */
+    U8                      SenseBufferLength;  /* 05h */
+    U8                      Reserved;           /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U8                      LUN[8];             /* 0Ch */
+    U32                     Control;            /* 14h */
+    U8                      CDB[32];            /* 18h */
+    U32                     DataLength;         /* 38h */
+    U32                     SenseBufferLowAddr; /* 3Ch */
+    SGE_IO_UNION            SGL;                /* 40h */
+} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
+  SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
+
+/* SCSI IO 32 uses the same defines as above for SCSI IO */
+
+
 /****************************************************************************/
 /*  SCSI Task Management messages                                           */
 /****************************************************************************/
@@ -203,6 +246,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
 #define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET          (0x03)
 #define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS             (0x04)
 #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET    (0x05)
+#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET        (0x06)
 
 /* MsgFlags bits */
 #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION   (0x00)

drivers/message/fusion/lsi/mpi_ioc.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_IOC.H
+ *           Name:  mpi_ioc.h
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    MPI_IOC.H Version:  01.02.06
+ *    mpi_ioc.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------
@@ -55,6 +55,8 @@
  *  05-31-02  01.02.06  Added define for
  *                      MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID.
  *                      Added AliasIndex to EVENT_DATA_LOGOUT structure.
+ *  04-01-03  01.02.07  Added defines for MPI_FW_HEADER_SIGNATURE_.
+ *  06-26-03  01.02.08  Added new values to the product family defines.
  *  --------------------------------------------------------------------------
  */
 
@@ -87,19 +89,21 @@ typedef struct _MSG_IOC_INIT
     U8                      Reserved1[2];               /* 0Eh */
     U32                     HostMfaHighAddr;            /* 10h */
     U32                     SenseBufferHighAddr;        /* 14h */
+    U32                     ReplyFifoHostSignalingAddr; /* 18h */
 } MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT,
   IOCInit_t, MPI_POINTER pIOCInit_t;
 
 /* WhoInit values */
-#define MPI_WHOINIT_NO_ONE                      (0x00)
-#define MPI_WHOINIT_SYSTEM_BIOS                 (0x01)
-#define MPI_WHOINIT_ROM_BIOS                    (0x02)
-#define MPI_WHOINIT_PCI_PEER                    (0x03)
-#define MPI_WHOINIT_HOST_DRIVER                 (0x04)
-#define MPI_WHOINIT_MANUFACTURER                (0x05)
+#define MPI_WHOINIT_NO_ONE                          (0x00)
+#define MPI_WHOINIT_SYSTEM_BIOS                     (0x01)
+#define MPI_WHOINIT_ROM_BIOS                        (0x02)
+#define MPI_WHOINIT_PCI_PEER                        (0x03)
+#define MPI_WHOINIT_HOST_DRIVER                     (0x04)
+#define MPI_WHOINIT_MANUFACTURER                    (0x05)
 
 /* Flags values */
-#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE      (0x01)
+#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE          (0x01)
+#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL    (0x02)
 
 typedef struct _MSG_IOC_INIT_REPLY
 {
@@ -179,8 +183,10 @@ typedef struct _MSG_IOC_FACTS_REPLY
     U8                      MaxDevices;                 /* 2Eh */
     U8                      MaxBuses;                   /* 2Fh */
     U32                     FWImageSize;                /* 30h */
-    U32                     Reserved4;                  /* 34h */
+    U32                     IOCCapabilities;            /* 34h */
     MPI_FW_VERSION          FWVersion;                  /* 38h */
+    U16                     HighPriorityQueueDepth;     /* 3Ch */
+    U16                     Reserved2;                  /* 3Eh */
 } MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY,
   IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t;
 
@@ -192,12 +198,22 @@ typedef struct _MSG_IOC_FACTS_REPLY
 
 #define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL    (0x0001)
 #define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID     (0x0002)
+#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL        (0x0004)
+#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL   (0x0008)
 
 #define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT         (0x01)
 
 #define MPI_IOCFACTS_EVENTSTATE_DISABLED            (0x00)
 #define MPI_IOCFACTS_EVENTSTATE_ENABLED             (0x01)
 
+#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q          (0x00000001)
+#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL   (0x00000002)
+#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004)
+#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER   (0x00000008)
+#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER     (0x00000010)
+#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER     (0x00000020)
+#define MPI_IOCFACTS_CAPABILITY_EEDP                (0x00000040)
+
 
 
 /*****************************************************************************
@@ -253,6 +269,8 @@ typedef struct _MSG_PORT_FACTS_REPLY
 #define MPI_PORTFACTS_PORTTYPE_INACTIVE         (0x00)
 #define MPI_PORTFACTS_PORTTYPE_SCSI             (0x01)
 #define MPI_PORTFACTS_PORTTYPE_FC               (0x10)
+#define MPI_PORTFACTS_PORTTYPE_ISCSI            (0x20)
+#define MPI_PORTFACTS_PORTTYPE_SAS              (0x30)
 
 /* ProtocolFlags values */
 
@@ -386,6 +404,10 @@ typedef struct _MSG_EVENT_ACK_REPLY
 #define MPI_EVENT_INTEGRATED_RAID           (0x0000000B)
 #define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C)
 #define MPI_EVENT_ON_BUS_TIMER_EXPIRED      (0x0000000D)
+#define MPI_EVENT_QUEUE_FULL                (0x0000000E)
+#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE  (0x0000000F)
+#define MPI_EVENT_SAS_SES                   (0x00000010)
+#define MPI_EVENT_PERSISTENT_TABLE_FULL     (0x00000011)
 
 /* AckRequired field values */
 
@@ -433,6 +455,39 @@ typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE
 #define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING       (0x04)
 #define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA           (0x05)
 
+/* SAS Device Status Change Event data */
+
+typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
+{
+    U8                      TargetID;                   /* 00h */
+    U8                      Bus;                        /* 01h */
+    U8                      ReasonCode;                 /* 02h */
+    U8                      Reserved;                   /* 03h */
+    U8                      ASC;                        /* 04h */
+    U8                      ASCQ;                       /* 05h */
+    U16                     DevHandle;                  /* 06h */
+    U32                     DeviceInfo;                 /* 08h */
+} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+  MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+  MpiEventDataSasDeviceStatusChange_t,
+  MPI_POINTER pMpiEventDataSasDeviceStatusChange_t;
+
+/* MPI SAS Device Status Change Event data ReasonCode values */
+#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED                 (0x03)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING        (0x04)
+#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA            (0x05)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED      (0x06)
+
+/* SCSI Event data for Queue Full event */
+
+typedef struct _EVENT_DATA_QUEUE_FULL
+{
+    U8                      TargetID;                   /* 00h */
+    U8                      Bus;                        /* 01h */
+    U16                     CurrentDepth;               /* 02h */
+} EVENT_DATA_QUEUE_FULL, MPI_POINTER PTR_EVENT_DATA_QUEUE_FULL,
+  EventDataQueueFull_t, MPI_POINTER pEventDataQueueFull_t;
+
 /* MPI Link Status Change Event data */
 
 typedef struct _EVENT_DATA_LINK_STATUS
@@ -538,6 +593,7 @@ typedef struct _MSG_FW_DOWNLOAD
 #define MPI_FW_DOWNLOAD_ITYPE_FW            (0x01)
 #define MPI_FW_DOWNLOAD_ITYPE_BIOS          (0x02)
 #define MPI_FW_DOWNLOAD_ITYPE_NVDATA        (0x03)
+#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER    (0x04)
 
 
 typedef struct _FWDownloadTCSGE
@@ -590,6 +646,7 @@ typedef struct _MSG_FW_UPLOAD
 #define MPI_FW_UPLOAD_ITYPE_FW_FLASH        (0x01)
 #define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH      (0x02)
 #define MPI_FW_UPLOAD_ITYPE_NVDATA          (0x03)
+#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER      (0x04)
 
 typedef struct _FWUploadTCSGE
 {
@@ -653,6 +710,11 @@ typedef struct _MPI_FW_HEADER
 #define MPI_FW_HEADER_PID_TYPE_MASK             (0xF000)
 #define MPI_FW_HEADER_PID_TYPE_SCSI             (0x0000)
 #define MPI_FW_HEADER_PID_TYPE_FC               (0x1000)
+#define MPI_FW_HEADER_PID_TYPE_SAS              (0x2000)
+
+#define MPI_FW_HEADER_SIGNATURE_0               (0x5AEAA55A)
+#define MPI_FW_HEADER_SIGNATURE_1               (0xA55AEAA5)
+#define MPI_FW_HEADER_SIGNATURE_2               (0x5AA55AEA)
 
 #define MPI_FW_HEADER_PID_PROD_MASK                     (0x0F00)
 #define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI           (0x0100)
@@ -663,6 +725,7 @@ typedef struct _MPI_FW_HEADER
 #define MPI_FW_HEADER_PID_PROD_CTX_SCSI                 (0x0600)
 
 #define MPI_FW_HEADER_PID_FAMILY_MASK           (0x00FF)
+/* SCSI */
 #define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI    (0x0001)
 #define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI    (0x0002)
 #define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI    (0x0003)
@@ -673,9 +736,17 @@ typedef struct _MPI_FW_HEADER
 #define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI    (0x0008)
 #define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI    (0x0009)
 #define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI    (0x000A)
+#define MPI_FW_HEADER_PID_FAMILY_1030TA0_SCSI   (0x000B)
+#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI   (0x000C)
+/* Fibre Channel */
 #define MPI_FW_HEADER_PID_FAMILY_909_FC         (0x0000)
 #define MPI_FW_HEADER_PID_FAMILY_919_FC         (0x0001)
 #define MPI_FW_HEADER_PID_FAMILY_919X_FC        (0x0002)
+#define MPI_FW_HEADER_PID_FAMILY_919XL_FC       (0x0003)
+#define MPI_FW_HEADER_PID_FAMILY_949_FC         (0x0004)
+#define MPI_FW_HEADER_PID_FAMILY_959_FC         (0x0005)
+/* SAS */
+#define MPI_FW_HEADER_PID_FAMILY_1064_SAS       (0x0001)
 
 typedef struct _MPI_EXT_IMAGE_HEADER
 {
@@ -694,5 +765,6 @@ typedef struct _MPI_EXT_IMAGE_HEADER
 #define MPI_EXT_IMAGE_TYPE_UNSPECIFIED          (0x00)
 #define MPI_EXT_IMAGE_TYPE_FW                   (0x01)
 #define MPI_EXT_IMAGE_TYPE_NVDATA               (0x03)
+#define MPI_EXT_IMAGE_TYPE_BOOTLOADER           (0x04)
 
 #endif

drivers/message/fusion/lsi/mpi_lan.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_LAN.H
+ *           Name:  mpi_lan.h
  *          Title:  MPI LAN messages and structures
  *  Creation Date:  June 30, 2000
  *
- *    MPI_LAN.H Version:  01.02.01
+ *    mpi_lan.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------

drivers/message/fusion/lsi/mpi_raid.h

 /*
- *  Copyright (c) 2001-2002 LSI Logic Corporation.
+ *  Copyright (c) 2001-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_RAID.H
+ *           Name:  mpi_raid.h
  *          Title:  MPI RAID message and structures
  *  Creation Date:  February 27, 2001
  *
- *    MPI_RAID.H Version:  01.02.07
+ *    mpi_raid.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------
@@ -25,6 +25,9 @@
  *                      MPI_RAID_ACTION_INACTIVATE_VOLUME, and
  *                      MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
  *  07-12-02  01.02.07  Added structures for Mailbox request and reply.
+ *  11-15-02  01.02.08  Added missing MsgContext field to MSG_MAILBOX_REQUEST.
+ *  04-01-03  01.02.09  New action data option flag for
+ *                      MPI_RAID_ACTION_DELETE_VOLUME.
  *  --------------------------------------------------------------------------
  */
 
@@ -40,7 +43,7 @@
 
 
 /****************************************************************************/
-/* RAID Volume Request                                                      */
+/* RAID Action Request                                                      */
 /****************************************************************************/
 
 typedef struct _MSG_RAID_ACTION
@@ -90,6 +93,9 @@ typedef struct _MSG_RAID_ACTION
 #define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS       (0x00000000)
 #define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS        (0x00000001)
 
+#define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
+#define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
+
 /* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
 
@@ -184,7 +190,7 @@ typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
 
 
 /****************************************************************************/
-/* Mailbox request structure */
+/* Mailbox reqeust structure */
 /****************************************************************************/
 
 typedef struct _MSG_MAILBOX_REQUEST
@@ -195,6 +201,7 @@ typedef struct _MSG_MAILBOX_REQUEST
     U16                     Reserved2;
     U8                      Reserved3;
     U8                      MsgFlags;
+    U32                     MsgContext;
     U8                      Command[10];
     U16                     Reserved4;
     SGE_IO_UNION            SGL;

drivers/message/fusion/lsi/mpi_sas.h

+/*
+ *  Copyright (c) 2003 LSI Logic Corporation.
+ *
+ *
+ *           Name:  mpi_sas.h
+ *          Title:  MPI Serial Attached SCSI structures and definitions
+ *  Creation Date:  April 23, 2003
+ *
+ *    mpi_sas.h Version:  01.05.xx
+ *
+ *  Version History
+ *  ---------------
+ *
+ *  Date      Version   Description
+ *  --------  --------  ------------------------------------------------------
+ *  xx-yy-zz  01.05.01  Original release.
+ *  --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_SAS_H
+#define MPI_SAS_H
+
+/*****************************************************************************
+*
+*        S e r i a l    A t t a c h e d    S C S I     M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Serial Management Protocol Passthrough Request                           */
+/****************************************************************************/
+
+typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
+{
+    U8                      PassthroughFlags;   /* 00h */
+    U8                      PhysicalPort;       /* 01h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     RequestDataLength;  /* 04h */
+    U8                      ConnectionRate;     /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U32                     Reserved1;          /* 0Ch */
+    U64                     SASAddress;         /* 10h */
+    U32                     Reserved2;          /* 18h */
+    U32                     Reserved3;          /* 1Ch */
+    SGE_SIMPLE_UNION        SGL;                /* 20h */
+} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
+  SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
+
+#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE       (0x80)
+
+#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED  (0x00)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5         (0x08)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0         (0x09)
+
+
+/* Serial Management Protocol Passthrough Reply */
+typedef struct _MSG_SMP_PASSTHROUGH_REPLY
+{
+    U8                      PassthroughFlags;   /* 00h */
+    U8                      PhysicalPort;       /* 01h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     ResponseDataLength; /* 04h */
+    U8                      Reserved1;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U8                      Reserved2;          /* 0Ch */
+    U8                      SASStatus;          /* 0Dh */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+    U32                     Reserved3;          /* 14h */
+    U8                      ResponseData[4];    /* 18h */
+} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
+  SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
+
+#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE     (0x80)
+
+/* values for the SASStatus field */
+#define MPI_SASSTATUS_SUCCESS                           (0x00)
+#define MPI_SASSTATUS_UNKNOWN_ERROR                     (0x01)
+#define MPI_SASSTATUS_INVALID_FRAME                     (0x02)
+#define MPI_SASSTATUS_UTC_BAD_DEST                      (0x03)
+#define MPI_SASSTATUS_UTC_BREAK_RECEIVED                (0x04)
+#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED    (0x05)
+#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST            (0x06)
+#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED        (0x07)
+#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY            (0x08)
+#define MPI_SASSTATUS_UTC_WRONG_DESTINATION             (0x09)
+#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT            (0x0A)
+#define MPI_SASSTATUS_LONG_INFORMATION_UNIT             (0x0B)
+#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA     (0x0C)
+#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR     (0x0D)
+#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED             (0x0E)
+#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH        (0x0F)
+#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA           (0x10)
+#define MPI_SASSTATUS_DATA_OFFSET_ERROR                 (0x11)
+#define MPI_SASSTATUS_SDSF_NAK_RECEIVED                 (0x12)
+#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED            (0x13)
+#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT        (0x14)
+
+
+/*
+ * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ * data and SAS IO Unit Configuration pages.
+ */
+#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
+#define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
+#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
+#define MPI_SAS_DEVICE_INFO_SSP_TARGET          (0x00000400)
+#define MPI_SAS_DEVICE_INFO_STP_TARGET          (0x00000200)
+#define MPI_SAS_DEVICE_INFO_SMP_TARGET          (0x00000100)
+#define MPI_SAS_DEVICE_INFO_SATA_DEVICE         (0x00000080)
+#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR       (0x00000040)
+#define MPI_SAS_DEVICE_INFO_STP_INITIATOR       (0x00000020)
+#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR       (0x00000010)
+#define MPI_SAS_DEVICE_INFO_SATA_HOST           (0x00000008)
+
+#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE    (0x00000007)
+#define MPI_SAS_DEVICE_INFO_NO_DEVICE           (0x00000000)
+#define MPI_SAS_DEVICE_INFO_END_DEVICE          (0x00000001)
+#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER       (0x00000002)
+#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER     (0x00000003)
+
+
+/****************************************************************************/
+/* SAS IO Unit Control Request                                              */
+/****************************************************************************/
+
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
+{
+    U8                      Operation;          /* 00h */
+    U8                      Reserved1;          /* 01h */
+    U8                      ChainOffset;        /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U8                      TargetID;           /* 0Ch */
+    U8                      Bus;                /* 0Dh */
+    U8                      PhyNum;             /* 0Eh */
+    U8                      Reserved4;          /* 0Fh */
+    U32                     Reserved5;          /* 10h */
+    U64                     SASAddress;         /* 14h */
+    U32                     Reserved6;          /* 1Ch */
+} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
+  SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
+
+/* values for the ... field */
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT             (0x01)
+#define MPI_SAS_OP_CLEAR_ALL                     (0x02)
+#define MPI_SAS_OP_MAP                           (0x03)
+#define MPI_SAS_OP_MOVE                          (0x04)
+#define MPI_SAS_OP_CLEAR                         (0x05)
+#define MPI_SAS_OP_PHY_LINK_RESET                (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET                (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG           (0x08)
+
+
+/* SAS IO Unit Control Reply */
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
+{
+    U8                      Operation;          /* 00h */
+    U8                      Reserved1;          /* 01h */
+    U8                      MsgLength;          /* 02h */
+    U8                      Function;           /* 03h */
+    U16                     Reserved2;          /* 04h */
+    U8                      Reserved3;          /* 06h */
+    U8                      MsgFlags;           /* 07h */
+    U32                     MsgContext;         /* 08h */
+    U16                     Reserved4;          /* 0Ch */
+    U16                     IOCStatus;          /* 0Eh */
+    U32                     IOCLogInfo;         /* 10h */
+} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
+  SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
+
+#endif
+
+

drivers/message/fusion/lsi/mpi_targ.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_TARG.H
+ *           Name:  mpi_targ.h
  *          Title:  MPI Target mode messages and structures
  *  Creation Date:  June 22, 2000
  *
- *    MPI_TARG.H Version:  01.02.07
+ *    mpi_targ.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------
@@ -41,6 +41,8 @@
  *                      Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
  *  09-16-02  01.02.07  Added flags for confirmed completion.
  *                      Added PRIORITY_REASON_TARGET_BUSY.
+ *  11-15-02  01.02.08  Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
+ *  04-01-03  01.02.09  Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
  *  --------------------------------------------------------------------------
  */
 
@@ -171,7 +173,7 @@ typedef struct _MPI_TARGET_FCP_CMD_BUFFER
     U32     FcpDl;                                      /* 1Ch */
     U8      AliasIndex;                                 /* 20h */
     U8      Reserved1;                                  /* 21h */
-    U16     Reserved2;                                  /* 22h */
+    U16     OptionalOxid;                               /* 22h */
 } MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER,
   MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer;
 
@@ -190,6 +192,10 @@ typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER
     U8      TaskManagementFlags;                        /* 12h */
     U8      AdditionalCDBLength;                        /* 13h */
     U8      CDB[16];                                    /* 14h */
+    /* Alias ID */
+    U8      AliasID;                                    /* 24h */
+    U8      Reserved1;                                  /* 25h */
+    U16     Reserved2;                                  /* 26h */
 } MPI_TARGET_SCSI_SPI_CMD_BUFFER,
   MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER,
   MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer;

drivers/message/fusion/lsi/mpi_type.h

 /*
- *  Copyright (c) 2000-2002 LSI Logic Corporation.
+ *  Copyright (c) 2000-2003 LSI Logic Corporation.
  *
  *
- *           Name:  MPI_TYPE.H
+ *           Name:  mpi_type.h
  *          Title:  MPI Basic type definitions
  *  Creation Date:  June 6, 2000
  *
- *    MPI Version:  01.02.01
+ *    mpi_type.h Version:  01.05.xx
  *
  *  Version History
  *  ---------------

drivers/message/fusion/mptbase.h

@@ -8,7 +8,7 @@
  *  Credits:
  *     (see mptbase.c)
  *
- *  Copyright (c) 1999-2003 LSI Logic Corporation
+ *  Copyright (c) 1999-2004 LSI Logic Corporation
  *  Originally By: Steven J. Ralston
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:mpt_linux_developer@lsil.com)
@@ -68,6 +68,7 @@
 
 #include "lsi/mpi_fc.h"		/* Fibre Channel (lowlevel) support */
 #include "lsi/mpi_targ.h"	/* SCSI/FCP Target protcol support */
+#include "lsi/mpi_tool.h"	/* Tools support */
 #include "lsi/fc_log.h"
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -77,11 +78,11 @@
 #endif
 
 #ifndef COPYRIGHT
-#define COPYRIGHT	"Copyright (c) 1999-2003 " MODULEAUTHOR
+#define COPYRIGHT	"Copyright (c) 1999-2004 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.00.03"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.00.03"
+#define MPT_LINUX_VERSION_COMMON	"3.01.00"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.01.00"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -93,10 +94,10 @@
  */
 #define MPT_MAX_ADAPTERS		18
 #define MPT_MAX_PROTOCOL_DRIVERS	16
-#define MPT_MAX_BUS			1
+#define MPT_MAX_BUS			1	/* Do not change */
 #define MPT_MAX_FC_DEVICES		255
 #define MPT_MAX_SCSI_DEVICES		16
-#define MPT_LAST_LUN			31
+#define MPT_LAST_LUN			255
 #define MPT_SENSE_BUFFER_ALLOC		64
 	/* allow for 256 max sense alloc, but only 255 max request */
 #if MPT_SENSE_BUFFER_ALLOC >= 256
@@ -127,6 +128,8 @@
 #define  MPT_MAX_FRAME_SIZE		128
 #define  MPT_DEFAULT_FRAME_SIZE		128
 
+#define  MPT_REPLY_FRAME_SIZE		0x40  /* Must be a multiple of 8 */
+
 #define  MPT_SG_REQ_128_SCALE		1
 #define  MPT_SG_REQ_96_SCALE		2
 #define  MPT_SG_REQ_64_SCALE		4
@@ -150,6 +153,9 @@
 #define MPT_NARROW			0
 #define MPT_WIDE			1
 
+#define C0_1030				0x08
+#define XL_929				0x01
+
 #ifdef __KERNEL__	/* { */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
@@ -185,8 +191,8 @@ struct mpt_pci_driver{
 	void (*remove) (struct pci_dev *dev);
 	void (*shutdown) (struct device * dev);
 #ifdef CONFIG_PM
-	int  (*suspend) (struct pci_dev *dev, u32 state);
 	int  (*resume) (struct pci_dev *dev);
+	int  (*suspend) (struct pci_dev *dev, u32 state);
 #endif
 };
 
@@ -201,9 +207,6 @@ typedef union _MPT_FRAME_TRACKER {
 		u32			 arg1;
 		u32			 pad;
 		void			*argp1;
-#ifndef MPT_SCSI_USE_NEW_EH
-		void			*argp2;
-#endif
 	} linkage;
 	/*
 	 * NOTE: When request frames are free, on the linkage structure
@@ -255,6 +258,7 @@ typedef struct _MPT_FRAME_HDR {
 		MPIHeader_t		hdr;
 		SCSIIORequest_t		scsireq;
 		SCSIIOReply_t		sreply;
+		ConfigReply_t		configreply;
 		MPIDefaultReply_t	reply;
 		MPT_FRAME_TRACKER	frame;
 	} u;
@@ -408,12 +412,9 @@ typedef struct _VirtDevice {
 	ScsiCmndTracker		 SentQ;
 	ScsiCmndTracker		 DoneQ;
 	u32			 num_luns;
-//--- LUN split here?
-	u32			 luns;		/* Max LUNs is 32 */
-	u8			 inq_data[SCSI_STD_INQUIRY_BYTES];	/* 36 */
-	u8			 pad0[4];
-	u8			 inq00_data[20];
-	u8			 pad1[4];
+	u32			 luns[8];		/* Max LUNs is 256 */
+	u8			 pad[4];
+	u8			 inq_data[8];
 		/* IEEE Registered Extended Identifier
 		   obtained via INQUIRY VPD page 0x83 */
 		/* NOTE: Do not separate uniq_prepad and uniq_data
@@ -421,26 +422,17 @@ typedef struct _VirtDevice {
 	u8			 uniq_prepad[8];
 	u8			 uniq_data[20];
 	u8			 pad2[4];
-	u8			 inqC3_data[12];
-	u8			 pad3[4];
-	u8			 inqC9_data[12];
-	u8			 pad4[4];
-	u8			 dev_vol_name[64];
 } VirtDevice;
 
 /*
  *  Fibre Channel (SCSI) target device and associated defines...
  */
-#define MPT_TARGET_DEFAULT_DV_STATUS	0
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,55)
-#define MPT_TARGET_FLAGS_CONFIGURED	0x02
-#define MPT_TARGET_FLAGS_Q_YES		0x08
-#else
+#define MPT_TARGET_DEFAULT_DV_STATUS	0x00
 #define MPT_TARGET_FLAGS_VALID_NEGO	0x01
 #define MPT_TARGET_FLAGS_VALID_INQUIRY	0x02
 #define MPT_TARGET_FLAGS_Q_YES		0x08
 #define MPT_TARGET_FLAGS_VALID_56	0x10
-#endif
+#define MPT_TARGET_FLAGS_SAF_TE_ISSUED	0x20
 
 #define MPT_TARGET_NO_NEGO_WIDE		0x01
 #define MPT_TARGET_NO_NEGO_SYNC		0x02
@@ -539,8 +531,13 @@ typedef struct _mpt_ioctl_events {
 /* #define MPT_SCSICFG_BLK_NEGO		0x10	   WriteSDP1 with WDTR and SDTR disabled */
 
 typedef	struct _ScsiCfgData {
+	u32		 PortFlags;
 	int		*nvram;			/* table of device NVRAM values */
+	IOCPage2_t	*pIocPg2;		/* table of Raid Volumes */
 	IOCPage3_t	*pIocPg3;		/* table of physical disks */
+	IOCPage4_t	*pIocPg4;		/* SEP devices addressing */
+	dma_addr_t	 IocPg4_dma;		/* Phys Addr of IOCPage4 data */
+	int		 IocPg4Sz;		/* IOCPage4 size */
 	u8		 dvStatus[MPT_MAX_SCSI_DEVICES];
 	int		 isRaid;		/* bit field, 1 if RAID */
 	u8		 minSyncFactor;		/* 0xFF if async */
@@ -554,7 +551,8 @@ typedef	struct _ScsiCfgData {
 	u8		 dvScheduled;		/* 1 if scheduled */
 	u8		 forceDv;		/* 1 to force DV scheduling */
 	u8		 noQas;			/* Disable QAS for this adapter */
-	u8		 rsvd[2];
+	u8		 Saf_Te;		/* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */
+	u8		 rsvd[1];
 } ScsiCfgData;
 
 typedef struct _fw_image {
@@ -610,6 +608,9 @@ typedef struct _MPT_ADAPTER
 	u32			 sense_buf_low_dma;
 	int			 mtrr_reg;
 	struct pci_dev		*pcidev;	/* struct pci_dev pointer */
+#if defined(MPTBASE_MEM_ALLOC_FIFO_FIX)
+	struct pci_dev		pcidev32;	/* struct pci_dev pointer */
+#endif	
 	u8			*memmap;	/* mmap address */
 	struct Scsi_Host	*sh;		/* Scsi Host pointer */
 	ScsiCfgData		spi_data;	/* Scsi config. data */
@@ -622,6 +623,12 @@ typedef struct _MPT_ADAPTER
 	int			 eventTypes;	/* Event logging parameters */
 	int			 eventContext;	/* Next event context */
 	int			 eventLogSize;	/* Max number of cached events */
+#ifdef MPTSCSIH_DBG_TIMEOUT
+	int			timeout_hard;
+	int			timeout_delta;
+	int			timeout_cnt;
+	int			timeout_maxcnt;
+#endif
 	struct _mpt_ioctl_events *events;	/* pointer to event log */
 	fw_image_t		**cached_fw;	/* Pointer to FW SG List */
 	Q_TRACKER		 configQ;	/* linked list of config. requests */
@@ -665,6 +672,7 @@ typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase);
 /* reset_phase defs */
 #define MPT_IOC_PRE_RESET		0
 #define MPT_IOC_POST_RESET		1
+#define MPT_IOC_SETUP_RESET		2
 
 /*
  * Invent MPT host event (super-set of MPI Events)
@@ -880,14 +888,12 @@ typedef struct _MPT_LOCAL_REPLY {
 #define MPT_NVRAM_WIDE_DISABLE		(0x00100000)
 #define MPT_NVRAM_BOOT_CHOICE		(0x00200000)
 
-#ifdef MPT_SCSI_USE_NEW_EH
 /* The TM_STATE variable is used to provide strict single threading of TM
  * requests as well as communicate TM error conditions.
  */
 #define TM_STATE_NONE          (0)
 #define	TM_STATE_IN_PROGRESS   (1)
 #define	TM_STATE_ERROR	       (2)
-#endif
 
 typedef struct _MPT_SCSI_HOST {
 	MPT_ADAPTER		 *ioc;
@@ -928,12 +934,8 @@ typedef struct _MPT_SCSI_HOST {
 	u8			  is_spi;		/* Parallel SCSI i/f */
 	u8			  negoNvram;		/* DV disabled, nego NVRAM */
 	u8			  is_multipath;		/* Multi-path compatible */
-#ifdef MPT_SCSI_USE_NEW_EH
 	u8                        tmState;
 	u8			  rsvd[1];
-#else
-	u8			  rsvd[2];
-#endif
 	MPT_FRAME_HDR		 *tmPtr;		/* Ptr to TM request*/
 	MPT_FRAME_HDR		 *cmdPtr;		/* Ptr to nonOS request */
 	struct scsi_cmnd	 *abortSCpnt;
@@ -1033,8 +1035,10 @@ extern u32	 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
 extern void	 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
 extern int	 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
 extern int	 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
+extern int	 mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 extern void	*mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size, int *frags, int *alloc_sz);
 extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc, fw_image_t **alt_img);
+extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 
 /*

drivers/message/fusion/mptctl.h

@@ -15,7 +15,7 @@
  *
  *      (see also mptbase.c)
  *
- *  Copyright (c) 1999-2003 LSI Logic Corporation
+ *  Copyright (c) 1999-2004 LSI Logic Corporation
  *  Originally By: Steven J. Ralston
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:mpt_linux_developer@lsil.com)
@@ -342,6 +342,7 @@ struct mpt_ioctl_command32 {
 #define CPQFCTS_IOC_MAGIC 'Z'
 #define HP_IOC_MAGIC 'Z'
 #define HP_GETHOSTINFO		_IOR(HP_IOC_MAGIC, 20, hp_host_info_t)
+#define HP_GETHOSTINFO1		_IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t)
 #define HP_GETTARGETINFO	_IOR(HP_IOC_MAGIC, 21, hp_target_info_t)
 
 /* All HP IOCTLs must include this header
@@ -357,7 +358,7 @@ typedef struct _hp_header {
 /*
  *  Header:
  *  iocnum 	required (input)
- *  host 	ignored	
+ *  host 	ignored
  *  channe	ignored
  *  id		ignored
  *  lun		ignored
@@ -371,9 +372,9 @@ typedef struct _hp_host_info {
 	u8		 devfn;
 	u8		 bus;
 	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
-	u8		 fw_version[16];	/* string */	
+	u8		 fw_version[16];	/* string */
 	u8		 serial_number[24];	/* string */
-	u32		 ioc_status;	
+	u32		 ioc_status;
 	u32		 bus_phys_width;
 	u32		 base_io_addr;
 	u32		 rsvd;
@@ -382,10 +383,33 @@ typedef struct _hp_host_info {
 	unsigned int	 timeouts;		/* num timeouts */
 } hp_host_info_t;
 
+/* replace ulongs with uints, need to preserve backwards
+ * compatibility.
+ */
+typedef struct _hp_host_info_rev0 {
+	hp_header_t	 hdr;
+	u16		 vendor;
+	u16		 device;
+	u16		 subsystem_vendor;
+	u16		 subsystem_id;
+	u8		 devfn;
+	u8		 bus;
+	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
+	u8		 fw_version[16];	/* string */
+	u8		 serial_number[24];	/* string */
+	u32		 ioc_status;
+	u32		 bus_phys_width;
+	u32		 base_io_addr;
+	u32		 rsvd;
+	unsigned long	 hard_resets;		/* driver initiated resets */
+	unsigned long	 soft_resets;		/* ioc, external resets */
+	unsigned long	 timeouts;		/* num timeouts */
+} hp_host_info_rev0_t;
+
 /*
  *  Header:
  *  iocnum 	required (input)
- *  host 	required	
+ *  host 	required
  *  channel	required	(bus number)
  *  id		required
  *  lun		ignored

drivers/message/fusion/mptlan.c

@@ -23,7 +23,7 @@
  *
  *      (see also mptbase.c)
  *
- *  Copyright (c) 2000-2003 LSI Logic Corporation
+ *  Copyright (c) 2000-2004 LSI Logic Corporation
  *  Originally By: Noah Romer
  *  (mailto:mpt_linux_developer@lsil.com)
  *
@@ -340,12 +340,15 @@ mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 	struct mpt_lan_priv *priv = (struct mpt_lan_priv *) dev->priv;
 
 	dlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to LAN driver!\n",
-			reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"));
+			reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
+			reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
 
 	if (priv->mpt_rxfidx == NULL)
 		return (1);
 
-	if (reset_phase == MPT_IOC_PRE_RESET) {
+	if (reset_phase == MPT_IOC_SETUP_RESET) {
+		;
+	} else if (reset_phase == MPT_IOC_PRE_RESET) {
 		int i;
 		unsigned long flags;
 

drivers/message/fusion/mptscsih.h

@@ -15,7 +15,7 @@
  *
  *      (see also mptbase.c)
  *
- *  Copyright (c) 1999-2003 LSI Logic Corporation
+ *  Copyright (c) 1999-2004 LSI Logic Corporation
  *  Originally By: Steven J. Ralston
  *  (mailto:netscape.net)
  *  (mailto:mpt_linux_developer@lsil.com)
@@ -70,11 +70,7 @@
  *	Try to keep these at 2^N-1
  */
 #define MPT_FC_CAN_QUEUE	127
-#if defined MPT_SCSI_USE_NEW_EH
-	#define MPT_SCSI_CAN_QUEUE	127
-#else
-	#define MPT_SCSI_CAN_QUEUE	63
-#endif
+#define MPT_SCSI_CAN_QUEUE	127
 
 #define MPT_SCSI_CMD_PER_DEV_HIGH	31
 #define MPT_SCSI_CMD_PER_DEV_LOW	7
@@ -98,7 +94,7 @@
 #define MPT_SCSI_SG_DEPTH	40
 #endif
 
-/* To disable domain validation, comment the
+/* To disable domain validation, uncomment the
  * following line. No effect for FC devices.
  * For SCSI devices, driver will negotiate to
  * NVRAM settings (if available) or to maximum adapter
@@ -114,12 +110,14 @@
 #define MPTSCSIH_DOMAIN_VALIDATION      1
 #define MPTSCSIH_MAX_WIDTH              1
 #define MPTSCSIH_MIN_SYNC               0x08
+#define MPTSCSIH_SAF_TE                 0
 
 struct mptscsih_driver_setup
 {
         u8      dv;
         u8      max_width;
         u8      min_sync_fac;
+        u8      saf_te;
 };
 
 
@@ -128,6 +126,7 @@ struct mptscsih_driver_setup
         MPTSCSIH_DOMAIN_VALIDATION,             \
         MPTSCSIH_MAX_WIDTH,                     \
         MPTSCSIH_MIN_SYNC,                      \
+        MPTSCSIH_SAF_TE,                        \
 }
 
 

drivers/message/fusion/scsi3.h

@@ -4,7 +4,7 @@
  *      (Ultimately) SCSI-3 definitions; for now, inheriting
  *      SCSI-2 definitions.
  *
- *  Copyright (c) 1996-2003 Steven J. Ralston
+ *  Copyright (c) 1996-2004 Steven J. Ralston
  *  Written By: Steven J. Ralston (19960517)
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:mpt_linux_developer@lsil.com)

drivers/scsi/53c700.h

@@ -99,18 +99,8 @@ struct NCR_700_SG_List {
 #define NCR_700_DEV_NEGOTIATED_SYNC	(1<<16)
 #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION	(1<<17)
 #define NCR_700_DEV_BEGIN_TAG_QUEUEING	(1<<18)
-#define NCR_700_DEV_TAG_STARVATION_WARNED (1<<19)
+#define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
 
-static inline void
-NCR_700_set_SXFER(Scsi_Device *SDp, __u8 sxfer)
-{
-	SDp->hostdata = (void *)(((long)SDp->hostdata & 0xffffff00) |
-				(sxfer & 0xff));
-}
-static inline __u8 NCR_700_get_SXFER(Scsi_Device *SDp)
-{
-	return (((unsigned long)SDp->hostdata) & 0xff);
-}
 static inline void
 NCR_700_set_depth(Scsi_Device *SDp, __u8 depth)
 {
@@ -215,6 +205,7 @@ struct NCR_700_Host_Parameters {
 	__u8	tag_negotiated;
 	__u8	rev;
 	__u8	reselection_id;
+	__u8	min_period;
 
 	/* Free list, singly linked by ITL_forw elements */
 	struct NCR_700_command_slot *free_list;
@@ -439,6 +430,7 @@ struct NCR_700_Host_Parameters {
 	} \
 }
 
+
 static inline __u8
 NCR_700_mem_readb(struct Scsi_Host *host, __u32 reg)
 {

drivers/scsi/BusLogic.c

@@ -140,7 +140,7 @@ static char *BusLogic_CommandFailureReason;
   Name, Copyright Notice, and Electronic Mail Address.
 */
 
-static void __init BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter)
+static void BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter)
 {
   BusLogic_Announce("***** BusLogic SCSI Driver Version "
 		    BusLogic_DriverVersion " of "

drivers/scsi/Kconfig

@@ -196,6 +196,25 @@ config SCSI_LOGGING
 	  there should be no noticeable performance impact as long as you have
 	  logging turned off.
 
+menu "SCSI Transport Attributes"
+	depends on SCSI
+
+config SCSI_SPI_ATTRS
+	tristate "Parallel SCSI (SPI) Transport Attributes"
+	depends on SCSI
+	help
+	  If you wish to export transport-specific information about
+	  each attached SCSI device to sysfs, say Y.  Otherwise, say N.
+
+config SCSI_FC_ATTRS
+	tristate "FiberChannel Transport Attributes"
+	depends on SCSI
+	help
+	  If you wish to export transport-specific information about
+	  each attached FiberChannel device to sysfs, say Y.
+	  Otherwise, say N.
+
+endmenu
 
 menu "SCSI low-level drivers"
 	depends on SCSI!=n
@@ -845,6 +864,7 @@ config SCSI_NCR53C406A
 config SCSI_NCR_D700
 	tristate "NCR Dual 700 MCA SCSI support"
 	depends on MCA && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This is a driver for the MicroChannel Dual 700 card produced by
 	  NCR and commonly used in 345x/35xx/4100 class machines.  It always
@@ -861,6 +881,7 @@ config 53C700_IO_MAPPED
 config SCSI_LASI700
 	tristate "HP Lasi SCSI support for 53c700/710"
 	depends on GSC && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This is a driver for the SCSI controller in the Lasi chip found in
 	  many PA-RISC workstations & servers.  If you do not know whether you
@@ -1212,6 +1233,7 @@ config SCSI_SEAGATE
 config SCSI_SIM710
 	tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
 	depends on (EISA || MCA) && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This driver for NCR53c710 based SCSI host adapters.
 

drivers/scsi/Makefile

@@ -22,6 +22,14 @@ subdir-$(CONFIG_PCMCIA)		+= pcmcia
 
 obj-$(CONFIG_SCSI)		+= scsi_mod.o
 
+# --- NOTE ORDERING HERE ---
+# For kernel non-modular link, transport attributes need to
+# be initialised before drivers
+# --------------------------
+obj-$(CONFIG_SCSI_SPI_ATTRS)	+= scsi_transport_spi.o
+obj-$(CONFIG_SCSI_FC_ATTRS) 	+= scsi_transport_fc.o
+
+
 obj-$(CONFIG_SCSI_AMIGA7XX)	+= amiga7xx.o	53c7xx.o
 obj-$(CONFIG_A3000_SCSI)	+= a3000.o	wd33c93.o
 obj-$(CONFIG_A2091_SCSI)	+= a2091.o	wd33c93.o
@@ -41,7 +49,7 @@ obj-$(CONFIG_SCSI_MAC_ESP)	+= mac_esp.o	NCR53C9x.o
 obj-$(CONFIG_SUN3_SCSI)		+= sun3_scsi.o  sun3_scsi_vme.o
 obj-$(CONFIG_MVME16x_SCSI)	+= mvme16x.o	53c7xx.o
 obj-$(CONFIG_BVME6000_SCSI)	+= bvme6000.o	53c7xx.o
-obj-$(CONFIG_SCSI_SIM710)	+= sim710.o	53c700.o
+obj-$(CONFIG_SCSI_SIM710)	+= 53c700.o	sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
 obj-$(CONFIG_SCSI_PCI2000)	+= pci2000.o
 obj-$(CONFIG_SCSI_PCI2220I)	+= pci2220i.o
@@ -64,7 +72,7 @@ obj-$(CONFIG_SCSI_IN2000)	+= in2000.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
 obj-$(CONFIG_SCSI_NCR53C406A)	+= NCR53c406a.o
-obj-$(CONFIG_SCSI_NCR_D700)	+= NCR_D700.o 53c700.o
+obj-$(CONFIG_SCSI_NCR_D700)	+= 53c700.o NCR_D700.o
 obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas.o
@@ -107,7 +115,7 @@ obj-$(CONFIG_SUN3X_ESP)		+= NCR53C9x.o	sun3x_esp.o
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o
 obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_CPQFCTS)	+= cpqfc.o
-obj-$(CONFIG_SCSI_LASI700)	+= lasi700.o 53c700.o
+obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
 obj-$(CONFIG_SCSI_SATA_SVW)	+= libata.o sata_svw.o
 obj-$(CONFIG_SCSI_ATA_PIIX)	+= libata.o ata_piix.o
@@ -130,7 +138,7 @@ scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o constants.o \
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 scsi_mod-$(CONFIG_X86_PC9800)	+= scsi_pc98.o
-			
+
 sd_mod-objs	:= sd.o
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 initio-objs	:= ini9100u.o i91uscsi.o

drivers/scsi/aic7xxx/Kconfig.aic79xx

@@ -4,7 +4,7 @@
 #
 config SCSI_AIC79XX
 	tristate "Adaptec AIC79xx U320 support"
-	depends on PCI
+	depends on PCI && SCSI
 	help
 	This driver supports all of Adaptec's Ultra 320 PCI-X
 	based SCSI controllers.

drivers/scsi/aic7xxx/Kconfig.aic7xxx

@@ -4,7 +4,7 @@
 #
 config SCSI_AIC7XXX
 	tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)"
-	depends on PCI || EISA
+	depends on (PCI || EISA) && SCSI
 	---help---
 	This driver supports all of Adaptec's Fast through Ultra 160 PCI
 	based SCSI controllers as well as the aic7770 based EISA and VLB