ASoC: dt-bindings: Correct interrupt flags in examples

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted some
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200908145954.4629-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/max98090.txt

@@ -55,5 +55,5 @@ audio-codec@10 {
 	compatible = "maxim,max98090";
 	reg = <0x10>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
 };

Documentation/devicetree/bindings/sound/rt5640.txt

@@ -88,7 +88,7 @@ rt5640 {
 	compatible = "realtek,rt5640";
 	reg = <0x1c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };

Documentation/devicetree/bindings/sound/rt5659.txt

@@ -72,7 +72,7 @@ rt5659 {
 	compatible = "realtek,rt5659";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };

Documentation/devicetree/bindings/sound/rt5665.txt

@@ -62,7 +62,7 @@ rt5659 {
 	compatible = "realtek,rt5665";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };

Documentation/devicetree/bindings/sound/rt5668.txt

@@ -41,7 +41,7 @@ rt5668 {
 	compatible = "realtek,rt5668b";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;

Documentation/devicetree/bindings/sound/rt5677.txt

@@ -64,7 +64,7 @@ rt5677 {
 	compatible = "realtek,rt5677";
 	reg = <0x2c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 	gpio-controller;
 	#gpio-cells = <2>;

Documentation/devicetree/bindings/sound/rt5682.txt

@@ -58,7 +58,7 @@ rt5682 {
 	compatible = "realtek,rt5682i";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;