Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and...

Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and 'clk-marvell' into clk-next

 - Bindings for Canaan K210 SoC clks

* clk-ingenic:
  clk: ingenic: Fix divider calculation with div tables

* clk-vc5:
  clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"

* clk-cleanup:
  clk: sunxi-ng: Make sure divider tables have sentinel
  clk: s2mps11: Fix a resource leak in error handling paths in the probe function
  clk: bcm: dvp: Add MODULE_DEVICE_TABLE()
  clk: bcm: dvp: drop a variable that is assigned to only

* clk-canaan:
  dt-binding: clock: Document canaan,k210-clk bindings
  dt-bindings: Add Canaan vendor prefix

* clk-marvell:
  clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9

Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Clock Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 SoC clocks driver bindings. The clock
+  controller node must be defined as a child node of the K210
+  system controller node.
+
+  See also:
+  - dt-bindings/clock/k210-clk.h
+
+properties:
+  compatible:
+    const: canaan,k210-clk
+
+  clocks:
+    description:
+      Phandle of the SoC 26MHz fixed-rate oscillator clock.
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    clocks {
+      in0: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    /* ... */
+    sysclk: clock-controller {
+      #clock-cells = <1>;
+      compatible = "canaan,k210-clk";
+      clocks = <&in0>;
+    };

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -179,6 +179,8 @@ patternProperties:
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^canaan,.*":
+    description: Canaan, Inc.
   "^caninos,.*":
     description: Caninos Loucos Program
   "^capella,.*":

drivers/clk/bcm/clk-bcm2711-dvp.c

@@ -25,7 +25,6 @@ static const struct clk_parent_data clk_dvp_parent = {
 static int clk_dvp_probe(struct platform_device *pdev)
 {
 	struct clk_hw_onecell_data *data;
-	struct resource *res;
 	struct clk_dvp *dvp;
 	void __iomem *base;
 	int ret;
@@ -42,7 +41,7 @@ static int clk_dvp_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	data = dvp->data;
 
-	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
@@ -108,6 +107,7 @@ static const struct of_device_id clk_dvp_dt_ids[] = {
 	{ .compatible = "brcm,brcm2711-dvp", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, clk_dvp_dt_ids);
 
 static struct platform_driver clk_dvp_driver = {
 	.probe	= clk_dvp_probe,

drivers/clk/clk-s2mps11.c

@@ -195,6 +195,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	return ret;
 
 err_reg:
+	of_node_put(s2mps11_clks[0].clk_np);
 	while (--i >= 0)
 		clkdev_drop(s2mps11_clks[i].lookup);
 

drivers/clk/clk-versaclock5.c

@@ -739,8 +739,8 @@ static int vc5_update_power(struct device_node *np_output,
 {
 	u32 value;
 
-	if (!of_property_read_u32(np_output,
-				  "idt,voltage-microvolts", &value)) {
+	if (!of_property_read_u32(np_output, "idt,voltage-microvolt",
+				  &value)) {
 		clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
 		switch (value) {
 		case 1800000:

drivers/clk/ingenic/cgu.c

@@ -392,15 +392,21 @@ static unsigned int
 ingenic_clk_calc_hw_div(const struct ingenic_cgu_clk_info *clk_info,
 			unsigned int div)
 {
-	unsigned int i;
+	unsigned int i, best_i = 0, best = (unsigned int)-1;
 
 	for (i = 0; i < (1 << clk_info->div.bits)
 				&& clk_info->div.div_table[i]; i++) {
-		if (clk_info->div.div_table[i] >= div)
-			return i;
+		if (clk_info->div.div_table[i] >= div &&
+		    clk_info->div.div_table[i] < best) {
+			best = clk_info->div.div_table[i];
+			best_i = i;
+
+			if (div == best)
+				break;
+		}
 	}
 
-	return i - 1;
+	return best_i;
 }
 
 static unsigned

drivers/clk/mvebu/armada-37xx-xtal.c

@@ -13,8 +13,8 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#define NB_GPIO1_LATCH	0xC
-#define XTAL_MODE	    BIT(31)
+#define NB_GPIO1_LATCH	0x8
+#define XTAL_MODE	    BIT(9)
 
 static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
 {

drivers/clk/sunxi-ng/ccu-sun50i-a64.c

@@ -389,6 +389,7 @@ static struct clk_div_table ths_div_table[] = {
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 4 },
 	{ .val = 3, .div = 6 },
+	{ /* Sentinel */ },
 };
 static const char * const ths_parents[] = { "osc24M" };
 static struct ccu_div ths_clk = {

drivers/clk/sunxi-ng/ccu-sun8i-h3.c

@@ -322,6 +322,7 @@ static struct clk_div_table ths_div_table[] = {
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 4 },
 	{ .val = 3, .div = 6 },
+	{ /* Sentinel */ },
 };
 static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
 				     0x074, 0, 2, ths_div_table, BIT(31), 0);

include/dt-bindings/clock/k210-clk.h

@@ -3,18 +3,52 @@
  * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
-#ifndef K210_CLK_H
-#define K210_CLK_H
+#ifndef CLOCK_K210_CLK_H
+#define CLOCK_K210_CLK_H
 
 /*
- * Arbitrary identifiers for clocks.
- * The structure is: in0 -> pll0 -> aclk -> cpu
- *
- * Since we use the hardware defaults for now, set all these to the same clock.
+ * Kendryte K210 SoC clock identifiers (arbitrary values).
  */
-#define K210_CLK_PLL0   0
-#define K210_CLK_PLL1   0
 #define K210_CLK_ACLK	0
 #define K210_CLK_CPU	0
+#define K210_CLK_SRAM0	1
+#define K210_CLK_SRAM1	2
+#define K210_CLK_AI	3
+#define K210_CLK_DMA	4
+#define K210_CLK_FFT	5
+#define K210_CLK_ROM	6
+#define K210_CLK_DVP	7
+#define K210_CLK_APB0	8
+#define K210_CLK_APB1	9
+#define K210_CLK_APB2	10
+#define K210_CLK_I2S0	11
+#define K210_CLK_I2S1	12
+#define K210_CLK_I2S2	13
+#define K210_CLK_I2S0_M	14
+#define K210_CLK_I2S1_M	15
+#define K210_CLK_I2S2_M	16
+#define K210_CLK_WDT0	17
+#define K210_CLK_WDT1	18
+#define K210_CLK_SPI0	19
+#define K210_CLK_SPI1	20
+#define K210_CLK_SPI2	21
+#define K210_CLK_I2C0	22
+#define K210_CLK_I2C1	23
+#define K210_CLK_I2C2	24
+#define K210_CLK_SPI3	25
+#define K210_CLK_TIMER0	26
+#define K210_CLK_TIMER1	27
+#define K210_CLK_TIMER2	28
+#define K210_CLK_GPIO	29
+#define K210_CLK_UART1	30
+#define K210_CLK_UART2	31
+#define K210_CLK_UART3	32
+#define K210_CLK_FPIOA	33
+#define K210_CLK_SHA	34
+#define K210_CLK_AES	35
+#define K210_CLK_OTP	36
+#define K210_CLK_RTC	37
 
-#endif /* K210_CLK_H */
+#define K210_NUM_CLKS	38
+
+#endif /* CLOCK_K210_CLK_H */