Commit ac03564f authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/44x: Add mtd ndfc to the ppx44x defconfig
  powerpc: Fix compiliation with hugetlbfs enabled
  arch/powerpc/sysdev/ehv_pic.c: add missing kfree
  powerpc/fsl-lbc: Fix for fsl_upm
  drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac
  powerpc/qe: Fixup QE_General4 errata
  powerpc/85xx: Fix compile error on p3060_qds.c
  powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO'
  powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe
parents dd38d298 49e44064
...@@ -449,6 +449,7 @@ pcie@0 { ...@@ -449,6 +449,7 @@ pcie@0 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <16 2>; interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>; interrupt-map-mask = <0xf800 0 0 7>;
/* IRQ[0:3] are pulled up on board, set to active-low */
interrupt-map = < interrupt-map = <
/* IDSEL 0x0 */ /* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1 0000 0 0 1 &mpic 0 1
...@@ -488,11 +489,15 @@ pcie@0 { ...@@ -488,11 +489,15 @@ pcie@0 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <16 2>; interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>; interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[4:6] only for PCIe, set to active-high,
* IRQ[7] is pulled up on board, set to active-low
*/
interrupt-map = < interrupt-map = <
/* IDSEL 0x0 */ /* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1 0000 0 0 1 &mpic 4 2
0000 0 0 2 &mpic 5 1 0000 0 0 2 &mpic 5 2
0000 0 0 3 &mpic 6 1 0000 0 0 3 &mpic 6 2
0000 0 0 4 &mpic 7 1 0000 0 0 4 &mpic 7 1
>; >;
ranges = <0x2000000 0x0 0xa0000000 ranges = <0x2000000 0x0 0xa0000000
...@@ -527,12 +532,16 @@ pcie@0 { ...@@ -527,12 +532,16 @@ pcie@0 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <16 2>; interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>; interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[8:10] are pulled up on board, set to active-low
* IRQ[11] only for PCIe, set to active-high,
*/
interrupt-map = < interrupt-map = <
/* IDSEL 0x0 */ /* IDSEL 0x0 */
0000 0 0 1 &mpic 8 1 0000 0 0 1 &mpic 8 1
0000 0 0 2 &mpic 9 1 0000 0 0 2 &mpic 9 1
0000 0 0 3 &mpic 10 1 0000 0 0 3 &mpic 10 1
0000 0 0 4 &mpic 11 1 0000 0 0 4 &mpic 11 2
>; >;
ranges = <0x2000000 0x0 0x80000000 ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000
......
...@@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y ...@@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_NDFC=m
CONFIG_MTD_UBI=m CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_GLUEBI=m
CONFIG_PROC_DEVICETREE=y CONFIG_PROC_DEVICETREE=y
......
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/of_fdt.h> #include <linux/of_fdt.h>
#include <linux/memblock.h> #include <linux/memblock.h>
#include <linux/bootmem.h> #include <linux/bootmem.h>
#include <linux/moduleparam.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
#include <asm/tlb.h> #include <asm/tlb.h>
......
...@@ -203,7 +203,7 @@ config P3060_QDS ...@@ -203,7 +203,7 @@ config P3060_QDS
select PPC_E500MC select PPC_E500MC
select PHYS_64BIT select PHYS_64BIT
select SWIOTLB select SWIOTLB
select MPC8xxx_GPIO select GPIO_MPC8XXX
select HAS_RAPIDIO select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC select PPC_EPAPR_HV_PIC
help help
......
...@@ -70,7 +70,7 @@ define_machine(p3060_qds) { ...@@ -70,7 +70,7 @@ define_machine(p3060_qds) {
.power_save = e500_idle, .power_save = e500_idle,
}; };
machine_device_initcall(p3060_qds, declare_of_platform_devices); machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
#ifdef CONFIG_SWIOTLB #ifdef CONFIG_SWIOTLB
machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
......
...@@ -280,6 +280,7 @@ void __init ehv_pic_init(void) ...@@ -280,6 +280,7 @@ void __init ehv_pic_init(void)
if (!ehv_pic->irqhost) { if (!ehv_pic->irqhost) {
of_node_put(np); of_node_put(np);
kfree(ehv_pic);
return; return;
} }
......
...@@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) ...@@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
err: err:
iounmap(fsl_lbc_ctrl_dev->regs); iounmap(fsl_lbc_ctrl_dev->regs);
kfree(fsl_lbc_ctrl_dev); kfree(fsl_lbc_ctrl_dev);
fsl_lbc_ctrl_dev = NULL;
return ret; return ret;
} }
......
...@@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) ...@@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
that the BRG divisor must be even if you're not using divide-by-16 that the BRG divisor must be even if you're not using divide-by-16
mode. */ mode. */
if (!div16 && (divisor & 1)) if (!div16 && (divisor & 1) && (divisor > 3))
divisor++; divisor++;
tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
......
...@@ -1128,7 +1128,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = { ...@@ -1128,7 +1128,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = {
{ .compatible = "fsl,p1020-memory-controller", }, { .compatible = "fsl,p1020-memory-controller", },
{ .compatible = "fsl,p1021-memory-controller", }, { .compatible = "fsl,p1021-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", }, { .compatible = "fsl,p2020-memory-controller", },
{ .compatible = "fsl,p4080-memory-controller", }, { .compatible = "fsl,qoriq-memory-controller", },
{}, {},
}; };
MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment