Skip to content

L
linux
Commit ac86c82c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://ppc.bkbits.net/for-linus-ppc 

into home.osdl.org:/home/torvalds/v2.5/linux
parents 06cdb4a9 125a6aad
Hide whitespace changes
Inline Side-by-side
Showing with 4955 additions and 68 deletions
arch/ppc/Kconfig
View file @ ac86c82c
...@@ -66,6 +66,9 @@ config 6xx ...@@ -66,6 +66,9 @@ config 6xx
config 40x config 40x
bool "40x" bool "40x"
config 44x
bool "44x"
config POWER3 config POWER3
bool "POWER3" bool "POWER3"
...@@ -74,6 +77,11 @@ config 8xx ...@@ -74,6 +77,11 @@ config 8xx
endchoice endchoice
config PTE_64BIT
bool
depends on 44x
default y
source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/4xx/Kconfig
config 8260 config 8260
...@@ -766,8 +774,8 @@ config MCA ...@@ -766,8 +774,8 @@ config MCA
RS/6000 machines are currently not supported by Linux. RS/6000 machines are currently not supported by Linux.
config PCI config PCI
bool "PCI support" if 4xx || 8260 bool "PCI support" if 40x || 8260
default y if !4xx && !8260 && !8xx && !APUS default y if !40x && !8260 && !8xx && !APUS
default PCI_PERMEDIA if !4xx && !8260 && !8xx && APUS default PCI_PERMEDIA if !4xx && !8260 && !8xx && APUS
default PCI_QSPAN if !4xx && !8260 && 8xx default PCI_QSPAN if !4xx && !8260 && 8xx
help help
...@@ -1143,6 +1151,7 @@ config BOOT_LOAD_BOOL ...@@ -1143,6 +1151,7 @@ config BOOT_LOAD_BOOL
config BOOT_LOAD config BOOT_LOAD
hex "Link/load address for booting" if BOOT_LOAD_BOOL hex "Link/load address for booting" if BOOT_LOAD_BOOL
default "0x00400000" if 40x || 8xx || 8260 default "0x00400000" if 40x || 8xx || 8260
default "0x01000000" if 44x
default "0x00800000" default "0x00800000"
config PIN_TLB config PIN_TLB
......
arch/ppc/Makefile
View file @ ac86c82c
...@@ -29,7 +29,7 @@ CFLAGS += $(cflags-y) ...@@ -29,7 +29,7 @@ CFLAGS += $(cflags-y)
head-y := arch/ppc/kernel/head.o head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o
head-$(CONFIG_440) := arch/ppc/kernel/head_44x.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o
head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o
......
arch/ppc/boot/simple/Makefile
View file @ ac86c82c
...@@ -48,11 +48,16 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE ...@@ -48,11 +48,16 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
zimage-$(CONFIG_EBONY) := zImage-TREE zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
extra.o-$(CONFIG_EBONY) := direct.o
end-$(CONFIG_EBONY) := ebony end-$(CONFIG_EBONY) := ebony
entrypoint-$(CONFIG_EBONY) := 0x01000000 entrypoint-$(CONFIG_EBONY) := 0x01000000
tftpimage-$(CONFIG_EBONY) := /tftpboot/zImage.$(end-y) tftpimage-$(CONFIG_EBONY) := /tftpboot/zImage.$(end-y)
zimage-$(CONFIG_OCOTEA) := zImage-TREE
zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
end-$(CONFIG_OCOTEA) := ocotea
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
tftpimage-$(CONFIG_OCOTEA) := /tftpboot/zImage.$(end-y)
extra.o-$(CONFIG_EV64260) := direct.o misc-ev64260.o extra.o-$(CONFIG_EV64260) := direct.o misc-ev64260.o
tftpimage-$(CONFIG_EV64260) := /tftpboot/zImage.ev64260 tftpimage-$(CONFIG_EV64260) := /tftpboot/zImage.ev64260
......
arch/ppc/boot/simple/misc.c
View file @ ac86c82c
...@@ -25,6 +25,9 @@ ...@@ -25,6 +25,9 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/mmu.h> #include <asm/mmu.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#ifdef CONFIG_44x
#include <asm/ibm4xx.h>
#endif
#include "nonstdio.h" #include "nonstdio.h"
#include "zlib.h" #include "zlib.h"
...@@ -80,6 +83,16 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) ...@@ -80,6 +83,16 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
serial_fixups(); serial_fixups();
com_port = serial_init(0, NULL); com_port = serial_init(0, NULL);
#ifdef CONFIG_44x
/* Reset MAL */
mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
/* Wait for reset */
while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
/* Reset EMAC */
*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
__asm__ __volatile__("eieio");
#endif
#if defined(CONFIG_LOPEC) || defined(CONFIG_PAL4) #if defined(CONFIG_LOPEC) || defined(CONFIG_PAL4)
/* /*
* Call get_mem_size(), which is memory controller dependent, * Call get_mem_size(), which is memory controller dependent,
......
arch/ppc/configs/ebony_defconfig 0 → 100644
View file @ ac86c82c
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
# CONFIG_6xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_8xx is not set
CONFIG_PTE_64BIT=y
CONFIG_4xx=y
#
# IBM 4xx options
#
CONFIG_EBONY=y
# CONFIG_OCOTEA is not set
CONFIG_440GP=y
CONFIG_440=y
CONFIG_PIN_TLB=y
CONFIG_BOOKE=y
CONFIG_IBM_OCP=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PC_KEYBOARD is not set
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x01000000
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Macintosh device drivers
#
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Library routines
#
CONFIG_CRC32=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
CONFIG_BDI_SWITCH=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_OCP=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
arch/ppc/configs/ocotea_defconfig 0 → 100644
View file @ ac86c82c
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
# CONFIG_6xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_8xx is not set
CONFIG_PTE_64BIT=y
CONFIG_4xx=y
#
# IBM 4xx options
#
# CONFIG_EBONY is not set
CONFIG_OCOTEA=y
CONFIG_440GX=y
CONFIG_440A=y
CONFIG_PIN_TLB=y
CONFIG_BOOKE=y
CONFIG_IBM_OCP=y
CONFIG_IBM_EMAC4=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PC_KEYBOARD is not set
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on console=ttyS0,115200"
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x01000000
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_OAKNET is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Macintosh device drivers
#
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Library routines
#
CONFIG_CRC32=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
CONFIG_BDI_SWITCH=y
CONFIG_DEBUG_INFO=y
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_OCP=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
arch/ppc/kernel/Makefile
View file @ ac86c82c
...@@ -12,6 +12,7 @@ endif ...@@ -12,6 +12,7 @@ endif
# Start off with 'head.o', change as needed. # Start off with 'head.o', change as needed.
extra-y := head.o extra-y := head.o
extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_40x) := head_4xx.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_8xx) := head_8xx.o extra-$(CONFIG_8xx) := head_8xx.o
extra-$(CONFIG_6xx) += idle_6xx.o extra-$(CONFIG_6xx) += idle_6xx.o
extra-y += vmlinux.lds.s extra-y += vmlinux.lds.s
......
arch/ppc/kernel/cputable.c
View file @ ac86c82c
...@@ -433,7 +433,7 @@ struct cpu_spec cpu_specs[] = { ...@@ -433,7 +433,7 @@ struct cpu_spec cpu_specs[] = {
}, },
#endif /* CONFIG_40x */ #endif /* CONFIG_40x */
#ifdef CONFIG_440 #ifdef CONFIG_44x
{ /* 440GP Rev. B */ { /* 440GP Rev. B */
0xf0000fff, 0x40000440, "440GP Rev. B", 0xf0000fff, 0x40000440, "440GP Rev. B",
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
...@@ -448,7 +448,14 @@ struct cpu_spec cpu_specs[] = { ...@@ -448,7 +448,14 @@ struct cpu_spec cpu_specs[] = {
32, 32, 32, 32,
0, /*__setup_cpu_440 */ 0, /*__setup_cpu_440 */
}, },
#endif /* CONFIG_440 */ { /* 440GX Rev. A */
0xf0000fff, 0x50000850, "440GX Rev. A",
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
32, 32,
0, /*__setup_cpu_440 */
},
#endif /* CONFIG_44x */
#if !CLASSIC_PPC #if !CLASSIC_PPC
{ /* default match */ { /* default match */
0x00000000, 0x00000000, "(generic PPC)", 0x00000000, 0x00000000, "(generic PPC)",
......
arch/ppc/kernel/head_44x.S 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/kernel/head_44x.S
*
* Kernel execution entry point code.
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002-2003 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/ibm4xx.h>
#include <asm/ibm44x.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/offsets.h>
/*
* Macros
*/
#define SET_IVOR(vector_number, vector_label) \
li r26,vector_label@l; \
mtspr SPRN_IVOR##vector_number,r26; \
sync
/* As with the other PowerPC ports, it is expected that when code
* execution begins here, the following registers contain valid, yet
* optional, information:
*
* r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
* r4 - Starting address of the init RAM disk
* r5 - Ending address of the init RAM disk
* r6 - Start of kernel command line string (e.g. "mem=128")
* r7 - End of kernel command line string
*
*/
.text
_GLOBAL(_stext)
_GLOBAL(_start)
/*
* Reserve a word at a fixed location to store the address
* of abatron_pteptrs
*/
nop
/*
* Save parameters we are passed
*/
mr r31,r3
mr r30,r4
mr r29,r5
mr r28,r6
mr r27,r7
li r24,0 /* CPU number */
/*
* Set up the initial MMU state
*
* We are still executing code at the virtual address
* mappings set by the firmware for the base of RAM.
*
* We first invalidate all TLB entries but the one
* we are running from. We then load the KERNELBASE
* mappings so we can begin to use kernel addresses
* natively and so the interrupt vector locations are
* permanently pinned (necessary since Book E
* implementations always have translation enabled).
*
* TODO: Use the known TLB entry we are running from to
* determine which physical region we are located
* in. This can be used to determine where in RAM
* (on a shared CPU system) or PCI memory space
* (on a DRAMless system) we are located.
* For now, we assume a perfect world which means
* we are located at the base of DRAM (physical 0).
*/
/*
* Search TLB for entry that we are currently using.
* Invalidate all entries but the one we are using.
*/
/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
mfspr r3,SPRN_MMUCR /* Get MMUCR */
lis r4,PPC44x_MMUCR_STS@h
ori r4,r4,PPC44x_MMUCR_TID@l /* Create mask */
andc r3,r3,r4 /* Clear out TID/STS bits */
mfspr r4,SPRN_PID /* Get PID */
or r3,r3,r4 /* Set TID bits */
mfmsr r5 /* Get MSR */
andi. r5,r5,MSR_IS@l /* TS=1? */
beq wmmucr /* If not, leave STS=0 */
oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
sync
bl invstr /* Find our address */
invstr: mflr r5 /* Make it accessible */
tlbsx r23,0,r5 /* Find entry we are in */
li r4,0 /* Start at TLB entry 0 */
li r3,0 /* Set PAGEID inval value */
1: cmpw r23,r4 /* Is this our entry? */
beq skpinv /* If so, skip the inval */
tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
skpinv: addi r4,r4,1 /* Increment */
cmpwi r4,64 /* Are we done? */
bne 1b /* If not, repeat */
isync /* If so, context change */
/*
* Configure and load pinned entries into TLB slots 62 and 63.
*/
lis r3,KERNELBASE@h /* Load the kernel virtual address */
ori r3,r3,KERNELBASE@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
/* Load the kernel PID = 0 */
li r0,0
mtspr SPRN_PID,r0
sync
/* Load the kernel TID = 0 */
mfspr r5,SPRN_MMUCR
lis r6, PPC44x_MMUCR_TID@h
ori r6,r6,PPC44x_MMUCR_TID@l
andc r5,r5,r6
mtspr SPRN_MMUCR,r5
sync
/* pageid fields */
clrrwi r3,r3,10 /* Mask off the effective page number */
ori r3,r3,(PPC44x_TLB_VALID | PPC44x_TLB_PAGESZ(PPC44x_PAGESZ_256M))
/* xlat fields */
clrrwi r4,r4,10 /* Mask off the real page number */
/* ERPN is 0 for first 4GB page */
/* attrib fields */
/* Added guarded bit to protect against speculative loads/stores */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
li r0,62 /* TLB slot 62 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
/* Force context change */
mfmsr r0
mtspr SRR1, r0
lis r0,3f@h
ori r0,r0,3f@l
mtspr SRR0,r0
sync
rfi
/* If necessary, invalidate original entry we used */
3: cmpwi r23,62
beq 4f
li r6,0
tlbwe r6,r23,PPC44x_TLB_PAGEID
sync
4: ori r3,r3,PPC44x_TLB_TS /* TS = 1 */
li r0,63 /* TLB slot 63 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/*
* Add temporary UART mapping for early debug. This
* mapping must be identical to that used by the early
* bootloader code since the same asm/serial.h parameters
* are used for polled operation.
*/
/* pageid fields */
lis r3,0xe000
ori r3,r3,(PPC44x_TLB_VALID | PPC44x_TLB_PAGESZ(PPC44x_PAGESZ_256M))
/* xlat fields */
lis r4,0x4000 /* RPN is 0x40000000 */
ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
/* attrib fields */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
li r0,60 /* TLB slot 60 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
ori r3,r3,PPC44x_TLB_TS /* Translation state 1 */
li r0,61 /* TLB slot 61 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
/* Force context change */
isync
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
SET_IVOR(2, DataStorage);
SET_IVOR(3, InstructionStorage);
SET_IVOR(4, ExternalInput);
SET_IVOR(5, Alignment);
SET_IVOR(6, Program);
SET_IVOR(7, FloatingPointUnavailable);
SET_IVOR(8, SystemCall);
SET_IVOR(9, AuxillaryProcessorUnavailable);
SET_IVOR(10, Decrementer);
SET_IVOR(11, FixedIntervalTimer);
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
SET_IVOR(15, Debug);
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
/*
* This is where the main kernel code starts.
*/
/* ptr to current */
lis r2,init_task@h
ori r2,r2,init_task@l
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
mtspr SPRG3,r4
/* stack */
lis r1,init_thread_union@h
ori r1,r1,init_thread_union@l
li r0,0
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
bl early_init
/*
* Decide what sort of machine this is and initialize the MMU.
*/
mr r3,r31
mr r4,r30
mr r5,r29
mr r6,r28
mr r7,r27
bl machine_init
bl MMU_init
/* Setup PTE pointers for the Abatron bdiGDB */
lis r6, swapper_pg_dir@h
ori r6, r6, swapper_pg_dir@l
lis r5, abatron_pteptrs@h
ori r5, r5, abatron_pteptrs@l
lis r4, KERNELBASE@h
ori r4, r4, KERNELBASE@l
stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
stw r6, 0(r5)
/* Let's move on */
lis r4,start_kernel@h
ori r4,r4,start_kernel@l
lis r3,MSR_KERNEL@h
ori r3,r3,MSR_KERNEL@l
mtspr SRR0,r4
mtspr SRR1,r3
rfi /* change context and jump to start_kernel */
/*
* Interrupt vector entry code
*
* The Book E MMUs are always on so we don't need to handle
* interrupts in real mode as with previous PPC processors. In
* this case we handle interrupts in the kernel virtual address
* space.
*
* Interrupt vectors are dynamically placed relative to the
* interrupt prefix as determined by the address of interrupt_base.
* The interrupt vectors offsets are programmed using the labels
* for each interrupt vector entry.
*
* Interrupt vectors must be aligned on a 16 byte boundary.
* We align on a 32 byte cache line boundary for good measure.
*/
#define NORMAL_EXCEPTION_PROLOG \
mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
mtspr SPRN_SPRG1,r11; \
mtspr SPRN_SPRG2,r1; \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
beq 1f; \
mfspr r1,SPRG3; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
addi r1,r1,THREAD_SIZE; \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
tophys(r11,r1); \
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
mfspr r10,SPRG0; \
stw r10,GPR10(r11); \
mfspr r12,SPRG1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
mfspr r10,SPRG2; \
mfspr r12,SRR0; \
stw r10,GPR1(r11); \
mfspr r9,SRR1; \
stw r10,0(r11); \
rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
stw r0,GPR0(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
/*
* Exception prolog for critical exceptions. This is a little different
* from the normal exception prolog above since a critical exception
* can potentially occur at any point during normal exception processing.
* Thus we cannot use the same SPRG registers as the normal prolog above.
* Instead we use a couple of words of memory at low physical addresses.
* This is OK since we don't support SMP on these processors.
*/
/* XXX but we don't have RAM mapped at 0 in space 0 -- paulus. */
#define CRITICAL_EXCEPTION_PROLOG \
stw r10,crit_r10@l(0); /* save two registers to work with */\
stw r11,crit_r11@l(0); \
mfspr r10,SPRG0; \
stw r10,crit_sprg0@l(0); \
mfspr r10,SPRG1; \
stw r10,crit_sprg1@l(0); \
mfspr r10,SPRG4R; \
stw r10,crit_sprg4@l(0); \
mfspr r10,SPRG5R; \
stw r10,crit_sprg5@l(0); \
mfspr r10,SPRG6R; \
stw r10,crit_sprg6@l(0); \
mfspr r10,SPRG7R; \
stw r10,crit_sprg7@l(0); \
mfspr r10,SPRN_PID; \
stw r10,crit_pid@l(0); \
mfspr r10,SRR0; \
stw r10,crit_srr0@l(0); \
mfspr r10,SRR1; \
stw r10,crit_srr1@l(0); \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
lis r11,critical_stack_top@h; \
ori r11,r11,critical_stack_top@l; \
beq 1f; \
/* COMING FROM USER MODE */ \
mfspr r11,SPRG3; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
addi r11,r11,THREAD_SIZE; \
1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
tophys(r11,r11); \
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
mflr r10; \
stw r10,_LINK(r11); \
mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
stw r12,_DEAR(r11); /* since they may have had stuff */\
mfspr r9,SPRN_ESR; /* in them at the point where the */\
stw r9,_ESR(r11); /* exception was taken */\
mfspr r12,CSRR0; \
stw r1,GPR1(r11); \
mfspr r9,CSRR1; \
stw r1,0(r11); \
tovirt(r1,r11); \
rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
stw r0,GPR0(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
/*
* Exception vectors.
*/
#define START_EXCEPTION(label) \
.align 5; \
label:
#define FINISH_EXCEPTION(func) \
bl transfer_to_handler_full; \
.long func; \
.long ret_from_except_full
#define EXCEPTION(n, label, hdlr, xfer) \
START_EXCEPTION(label); \
NORMAL_EXCEPTION_PROLOG; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
xfer(n, hdlr)
#define CRITICAL_EXCEPTION(n, label, hdlr) \
START_EXCEPTION(label); \
CRITICAL_EXCEPTION_PROLOG; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
NOCOPY, transfer_to_handler_full, \
ret_from_except_full)
#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
li r10,trap; \
stw r10,TRAP(r11); \
lis r10,msr@h; \
ori r10,r10,msr@l; \
copyee(r10, r9); \
bl tfer; \
.long hdlr; \
.long ret
#define COPY_EE(d, s) rlwimi d,s,0,16,16
#define NOCOPY(d, s)
#define EXC_XFER_STD(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
ret_from_except_full)
#define EXC_XFER_LITE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
ret_from_except)
#define EXC_XFER_EE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
ret_from_except_full)
#define EXC_XFER_EE_LITE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
ret_from_except)
interrupt_base:
/* Critical Input Interrupt */
CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
/* Machine Check Interrupt */
CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
/* Data Storage Interrupt */
START_EXCEPTION(DataStorage)
mtspr SPRG0, r10 /* Save some working registers */
mtspr SPRG1, r11
mtspr SPRG4W, r12
mtspr SPRG5W, r13
mtspr SPRG6W, r14
mfcr r11
mtspr SPRG7W, r11
/*
* Check if it was a store fault, if not then bail
* because a user tried to access a kernel or
* read-protected page. Otherwise, get the
* offending address and handle it.
*/
mfspr r10, SPRN_ESR
andis. r10, r10, ESR_ST@h
beq 2f
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
andis. r11, r10, 0x8000
beq 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
mfspr r12,SPRN_MMUCR /* Set TID to 0 */
li r13,PPC44x_MMUCR_TID@l
andc r12,r12,r13
mtspr SPRN_MMUCR,r12
b 4f
/* Get the PGD for the current thread */
3:
mfspr r11,SPRG3
lwz r11,PGDIR(r11)
/* Load MMUCR with our PID and STS=<current TS> */
mfspr r12,SPRN_MMUCR /* Get MMUCR */
lis r13,PPC44x_MMUCR_STS@h
ori r13,r13,PPC44x_MMUCR_TID@l /* Create mask */
andc r12,r12,r13 /* Clear out TID/STS bits */
mfspr r13,SPRN_PID /* Get PID */
or r12,r12,r13 /* Set TID bits */
mfspr r14,SPRN_SRR1 /* Get SRR1 */
andi. r14,r14,MSR_IS@l /* TS=1? */
beq 4f /* If not, leave STS=0 */
oris r12,r12,PPC44x_MMUCR_STS@h /* Set STS=1 */
mtspr SPRN_MMUCR,r12
4:
rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
lwzx r11, r12, r11 /* Get pgd/pmd entry */
rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
beq 2f /* Bail if no table */
rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
lwz r11, 4(r12) /* Get pte entry */
andi. r13, r11, _PAGE_RW /* Is it writeable? */
beq 2f /* Bail if not */
/* Update 'changed'.
*/
ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
stw r11, 4(r12) /* Update Linux page table */
/* FIXME: Staticly setting some permissions */
li r13, 0x003f /* Set UX,UW,UR,SX,SW,SR */
andi. r11,r11,0xffff /* Clear MS 16 bits */
/* FIXME: Force attributes */
ori r11,r11, 0x0100 /* Set G */
/* FIXME: Already set in PTE */
rlwimi r11,r13,0,26,31 /* Insert static perms */
lis r13,0xffff
ori r13,r13,0x0fff /* Set U0-U3 mask */
and r11,r11,r13 /* Clear U0-U3 */
/* find the TLB index that caused the fault. It has to be here. */
tlbsx r14, 0, r10
tlbwe r11, r14, PPC44x_TLB_ATTRIB /* Write ATTRIB */
/* Done...restore registers and get out of here.
*/
mfspr r11, SPRG7R
mtcr r11
mfspr r14, SPRG6R
mfspr r13, SPRG5R
mfspr r12, SPRG4R
mfspr r11, SPRG1
mfspr r10, SPRG0
rfi /* Force context change */
2:
/*
* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
mfspr r11, SPRG7R
mtcr r11
mfspr r14, SPRG6R
mfspr r13, SPRG5R
mfspr r12, SPRG4R
mfspr r11, SPRG1
mfspr r10, SPRG0
b data_access
/* Instruction Storage Interrupt */
START_EXCEPTION(InstructionStorage)
NORMAL_EXCEPTION_PROLOG
mr r4,r12 /* Pass SRR0 as arg2 */
li r5,0 /* Pass zero as arg3 */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0x0400, do_page_fault)
/* External Input Interrupt */
EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
/* Alignment Interrupt */
START_EXCEPTION(Alignment)
NORMAL_EXCEPTION_PROLOG
mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
stw r4,_DEAR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE(0x0600, AlignmentException)
/* Program Interrupt */
START_EXCEPTION(Program)
NORMAL_EXCEPTION_PROLOG
mfspr r4,SPRN_ESR /* Grab the ESR and save it */
stw r4,_ESR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE(0x700, ProgramCheckException)
/* Floating Point Unavailable Interrupt */
EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
/* System Call Interrupt */
START_EXCEPTION(SystemCall)
NORMAL_EXCEPTION_PROLOG
EXC_XFER_EE_LITE(0x0c00, DoSyscall)
/* Auxillary Processor Unavailable Interrupt */
EXCEPTION(0x2020, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
/* Decrementer Interrupt */
START_EXCEPTION(Decrementer)
NORMAL_EXCEPTION_PROLOG
lis r0,TSR_DIS@h /* Setup the DEC interrupt mask */
mtspr SPRN_TSR,r0 /* Clear the DEC interrupt */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_LITE(0x1000, timer_interrupt)
/* Fixed Internal Timer Interrupt */
/* TODO: Add FIT support */
EXCEPTION(0x1010, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
/* Watchdog Timer Interrupt */
/* TODO: Add watchdog support */
CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
mtspr SPRG0, r10 /* Save some working registers */
mtspr SPRG1, r11
mtspr SPRG4W, r12
mtspr SPRG5W, r13
mtspr SPRG6W, r14
mfcr r11
mtspr SPRG7W, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
andis. r11, r10, 0x8000
beq 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
mfspr r12,SPRN_MMUCR /* Set TID to 0 */
li r13,PPC44x_MMUCR_TID@l
andc r12,r12,r13
mtspr SPRN_MMUCR,r12
b 4f
/* Get the PGD for the current thread */
3:
mfspr r11,SPRG3
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
li r13,PPC44x_MMUCR_TID@l /* Create mask */
andc r12,r12,r13 /* Clear out TID/STS bits */
mfspr r13,SPRN_PID /* Get PID */
or r12,r12,r13
mtspr SPRN_MMUCR,r12
4:
rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
lwzx r11, r12, r11 /* Get pgd/pmd entry */
rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
beq 2f /* Bail if no table */
rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
lwz r11, 4(r12) /* Get pte entry */
andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
beq 2f /* Bail if not present */
ori r11, r11, _PAGE_ACCESSED
stw r11, 4(r12)
/* Jump to common tlb load */
b finish_tlb_load
2:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
mfspr r11, SPRG7R
mtcr r11
mfspr r14, SPRG6R
mfspr r13, SPRG5R
mfspr r12, SPRG4R
mfspr r11, SPRG1
mfspr r10, SPRG0
b data_access
/* Instruction TLB Error Interrupt */
/*
* Nearly the same as above, except we get our
* information from different registers and bailout
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
mtspr SPRG0, r10 /* Save some working registers */
mtspr SPRG1, r11
mtspr SPRG4W, r12
mtspr SPRG5W, r13
mtspr SPRG6W, r14
mfcr r11
mtspr SPRG7W, r11
mfspr r10, SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
andis. r11, r10, 0x8000
beq 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
mfspr r12,SPRN_MMUCR /* Set TID to 0 */
li r13,PPC44x_MMUCR_TID@l
andc r12,r12,r13
mtspr SPRN_MMUCR,r12
b 4f
/* Get the PGD for the current thread */
3:
mfspr r11,SPRG3
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
li r13,PPC44x_MMUCR_TID@l /* Create mask */
andc r12,r13,r13 /* Clear out TID/STS bits */
mfspr r13,SPRN_PID /* Get PID */
or r12,r12,r13
mtspr SPRN_MMUCR,r12
4:
rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
lwzx r11, r12, r11 /* Get pgd/pmd entry */
rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
beq 2f /* Bail if no table */
rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
lwz r11, 4(r12) /* Get pte entry */
andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
beq 2f /* Bail if not present */
ori r11, r11, _PAGE_ACCESSED
stw r11, 4(r12)
/* Jump to common TLB load point */
b finish_tlb_load
2:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
mfspr r11, SPRG7R
mtcr r11
mfspr r14, SPRG6R
mfspr r13, SPRG5R
mfspr r12, SPRG4R
mfspr r11, SPRG1
mfspr r10, SPRG0
b InstructionStorage
/* Check for a single step debug exception while in an exception
* handler before state has been saved. This is to catch the case
* where an instruction that we are trying to single step causes
* an exception (eg ITLB/DTLB miss) and thus the first instruction of
* the exception handler generates a single step debug exception.
*
* If we get a debug trap on the first instruction of an exception handler,
* we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
* a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
* The exception handler was handling a non-critical interrupt, so it will
* save (and later restore) the MSR via SPRN_SRR1, which will still have
* the MSR_DE bit set.
*/
/* Debug Interrupt */
CRITICAL_EXCEPTION(0x2000, Debug, DebugException)
#if 0
START_EXCEPTION(Debug)
/* This first instruction was already executed by the exception
* handler and must be the first instruction of every exception
* handler.
*/
mtspr SPRN_SPRG0,r10 /* Save some working registers... */
mtspr SPRN_SPRG1,r11
mtspr SPRN_SPRG4W,r12
mfcr r10 /* ..and the cr because we change it */
mfspr r11,SPRN_CSRR1 /* MSR at the time of fault */
andi. r11,r11,MSR_PR
bne+ 2f /* trapped from problem state */
mfspr r11,SPRN_CSRR0 /* Faulting instruction address */
lis r12, KERNELBASE@h
ori r12, r12, KERNELBASE@l
cmplw r11,r12
blt+ 2f /* addr below exception vectors */
lis r12, Debug@h
ori r12, r12, Debug@l
cmplw r11,r12
bgt+ 2f /* addr above TLB exception vectors */
lis r11,DBSR_IC@h /* Remove the trap status */
mtspr SPRN_DBSR,r11
mfspr r11,SPRN_CSRR1
rlwinm r11,r11,0,23,21 /* clear MSR_DE */
mtspr SPRN_CSRR1, r11 /* restore MSR at rcfi without DE */
mtcrf 0xff,r10 /* restore registers */
mfspr r12,SPRN_SPRG4R
mfspr r11,SPRN_SPRG1
mfspr r10,SPRN_SPRG0
sync
rfci /* return to the exception handler */
b . /* prevent prefetch past rfci */
2:
mtcrf 0xff,r10 /* restore registers */
mfspr r12,SPRN_SPRG4R
mfspr r11,SPRN_SPRG1
mfspr r10,SPRN_SPRG0
CRIT_EXCEPTION_PROLOG
addi r3,r1,STACK_FRAME_OVERHEAD
li r7,CRIT_EXC;
li r9,MSR_KERNEL
FINISH_EXCEPTION(DebugException)
#endif
/*
* Local functions
*/
/*
* Data TLB exceptions will bail out to this point
* if they can't resolve the lightweight TLB fault.
*/
data_access:
NORMAL_EXCEPTION_PROLOG
mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
stw r5,_ESR(r11)
mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
stw r4,_DEAR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0x0300, do_page_fault)
/*
* Both the instruction and data TLB miss get to this
* point to load the TLB.
* r10 - EA of fault
* r11 - available to use
* r12 - Pointer to the 64-bit PTE
* r13 - available to use
* r14 - available to use
* MMUCR - loaded with proper value when we get here
* Upon exit, we reload everything and RFI.
*/
finish_tlb_load:
/*
* We set execute, because we don't have the granularity to
* properly set this at the page level (Linux problem).
* If shared is set, we cause a zero PID->TID load.
* Many of these bits are software only. Bits we don't set
* here we (properly should) assume have the appropriate value.
*/
/* Load the next available TLB index */
lis r13, tlb_44x_index@h
ori r13, r13, tlb_44x_index@l
lwz r14, 0(r13)
/* Load the TLB high watermark */
lis r13, tlb_44x_hwater@h
ori r13, r13, tlb_44x_hwater@l
lwz r11, 0(r13)
/* Increment, rollover, and store TLB index */
addi r14, r14, 1
cmpw 0, r14, r11 /* reserve entries 62-63 for kernel */
ble 7f
li r14, 0
7:
/* Load the next available TLB index */
lis r13, tlb_44x_index@h
ori r13, r13, tlb_44x_index@l
stw r14, 0(r13)
6:
lwz r13, 0(r12) /* Get MS word of PTE */
lwz r11, 4(r12) /* Get LS word of PTE */
rlwimi r13, r11, 0, 0 , 19 /* Insert RPN */
tlbwe r13, r14, PPC44x_TLB_XLAT /* Write XLAT */
/*
* Create PAGEID. This is the faulting address plus
* a set of static bits. The static bits are page
* size and valid. Bits 20 and 21 should be zero
* for a page size of 4KB.
*/
li r12, 0x0210 /* Set size and valid */
mfspr r13, SPRN_SRR1 /* Get SRR1 */
andi. r13, r13, MSR_IS@l
beq 7f
ori r12, r12, PPC44x_TLB_TS@l /* Set TS=1 */
7: rlwimi r10, r12, 0, 20, 31 /* Insert statics */
tlbwe r10, r14, PPC44x_TLB_PAGEID /* Write PAGEID */
/* FIXME: Staticly setting some permissions */
li r13, 0x002d /* Set UX,UR,SX,SR */
andi. r11, r11, 0xffff /* Clear MS 16 bits */
andi. r12, r11, 0x0002 /* _PAGE_HWWRITE? */
beq 8f
ori r13, r13, 0x0002 /* Set SW */
/* FIXME: Force attributes */
8: ori r11, r11, 0x0100 /* Set G */
/* FIXME: Already set in PTE */
rlwimi r11, r13, 0, 26, 31 /* Insert static perms */
lis r13,0xffff
ori r13,r13,0x0fff /* Set U0-U3 mask */
and r11,r11,r13 /* Clear U0-U3 */
tlbwe r11, r14, PPC44x_TLB_ATTRIB /* Write ATTRIB */
/* Done...restore registers and get out of here.
*/
mfspr r11, SPRG7R
mtcr r11
mfspr r14, SPRG6R
mfspr r13, SPRG5R
mfspr r12, SPRG4R
mfspr r11, SPRG1
mfspr r10, SPRG0
rfi /* Force context change */
/*
* Global functions
*/
/*
* extern void giveup_altivec(struct task_struct *prev)
*
* The 44x core does not have an AltiVec unit.
*/
_GLOBAL(giveup_altivec)
blr
/*
* extern void giveup_fpu(struct task_struct *prev)
*
* The 44x core does not have an FPU.
*/
_GLOBAL(giveup_fpu)
blr
/*
* extern void abort(void)
*
* At present, this routine just applies a system reset.
*/
_GLOBAL(abort)
mfspr r13,SPRN_DBCR0
oris r13,r13,DBCR_RST(DBCR_RST_SYSTEM)@h
mtspr SPRN_DBCR0,r13
_GLOBAL(set_context)
#ifdef CONFIG_BDI_SWITCH
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is the second parameter.
*/
lis r5, abatron_pteptrs@h
ori r5, r5, abatron_pteptrs@l
stw r4, 0x4(r5)
#endif
mtspr SPRN_PID,r3
isync /* Force context change */
blr
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
*/
.data
_GLOBAL(sdata)
_GLOBAL(empty_zero_page)
.space 4096
/*
* To support >32-bit physical addresses, we use an 8KB pgdir.
*/
_GLOBAL(swapper_pg_dir)
.space 8192
/* Stack for handling critical exceptions from kernel mode */
.section .bss
critical_stack_bottom:
.space 4096
critical_stack_top:
.previous
/*
* This space gets a copy of optional info passed to us by the bootstrap
* which is used to pass parameters into the kernel like root=/dev/sda1, etc.
*/
_GLOBAL(cmd_line)
.space 512
/*
* Room for two PTE pointers, usually the kernel and current user pointers
* to their respective root page table.
*/
abatron_pteptrs:
.space 8
/*
* This area is used for temporarily saving registers during the
* critical exception prolog.
*/
crit_save:
_GLOBAL(crit_r10)
.space 4
_GLOBAL(crit_r11)
.space 4
_GLOBAL(crit_sprg0)
.space 4
_GLOBAL(crit_sprg1)
.space 4
_GLOBAL(crit_sprg4)
.space 4
_GLOBAL(crit_sprg5)
.space 4
_GLOBAL(crit_sprg6)
.space 4
_GLOBAL(crit_sprg7)
.space 4
_GLOBAL(crit_pid)
.space 4
_GLOBAL(crit_srr0)
.space 4
_GLOBAL(crit_srr1)
.space 4
arch/ppc/kernel/misc.S
View file @ ac86c82c
...@@ -405,16 +405,20 @@ _GLOBAL(_tlbia) ...@@ -405,16 +405,20 @@ _GLOBAL(_tlbia)
sync /* Flush to memory before changing mapping */ sync /* Flush to memory before changing mapping */
tlbia tlbia
isync /* Flush shadow TLB */ isync /* Flush shadow TLB */
#elif defined(CONFIG_440) #elif defined(CONFIG_44x)
lis r3,0 lis r3,0
sync sync
1: 1:
tlbwe r3,r3,PPC440_TLB_PAGEID tlbwe r3,r3,PPC44x_TLB_PAGEID
addi r3,r3,1 addi r3,r3,1
cmpwi 0,r3,61 /* Load high watermark */
lis r4,tlb_44x_hwater@h
ori r4,r4,tlb_44x_hwater@l
lwz r5,0(r4)
cmpw 0,r3,r5
ble 1b ble 1b
isync isync
#else /* !(CONFIG_40x || CONFIG_440) */ #else /* !(CONFIG_40x || CONFIG_44x) */
#if defined(CONFIG_SMP) #if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18 rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8) lwz r8,TI_CPU(r8)
...@@ -465,17 +469,17 @@ _GLOBAL(_tlbie) ...@@ -465,17 +469,17 @@ _GLOBAL(_tlbie)
tlbwe r3, r3, TLB_TAG tlbwe r3, r3, TLB_TAG
isync isync
10: 10:
#elif defined(CONFIG_440) #elif defined(CONFIG_44x)
mfspr r4,SPRN_MMUCR /* Get MMUCR */ mfspr r4,SPRN_MMUCR /* Get MMUCR */
lis r5,PPC440_MMUCR_STS@h lis r5,PPC44x_MMUCR_STS@h
ori r5,r5,PPC440_MMUCR_TID@l /* Create mask */ ori r5,r5,PPC44x_MMUCR_TID@l /* Create mask */
andc r4,r4,r5 /* Clear out TID/STS bits */ andc r4,r4,r5 /* Clear out TID/STS bits */
mfspr r5,SPRN_PID /* Get PID */ mfspr r5,SPRN_PID /* Get PID */
or r4,r4,r5 /* Set TID bits */ or r4,r4,r5 /* Set TID bits */
mfmsr r6 /* Get MSR */ mfmsr r6 /* Get MSR */
andi. r6,r6,MSR_IS@l /* TS=1? */ andi. r6,r6,MSR_IS@l /* TS=1? */
beq 11f /* If not, leave STS=0 */ beq 11f /* If not, leave STS=0 */
oris r4,r4,PPC440_MMUCR_STS@h /* Set STS=1 */ oris r4,r4,PPC44x_MMUCR_STS@h /* Set STS=1 */
11: mtspr SPRN_MMUCR, r4 /* Put MMUCR */ 11: mtspr SPRN_MMUCR, r4 /* Put MMUCR */
tlbsx. r3, 0, r3 tlbsx. r3, 0, r3
...@@ -486,10 +490,10 @@ _GLOBAL(_tlbie) ...@@ -486,10 +490,10 @@ _GLOBAL(_tlbie)
* the V bit in the TLB_PAGEID, loading this * the V bit in the TLB_PAGEID, loading this
* value will invalidate the TLB entry. * value will invalidate the TLB entry.
*/ */
tlbwe r3, r3, PPC440_TLB_PAGEID tlbwe r3, r3, PPC44x_TLB_PAGEID
isync isync
10: 10:
#else /* !(CONFIG_40x || CONFIG_440) */ #else /* !(CONFIG_40x || CONFIG_44x) */
#if defined(CONFIG_SMP) #if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18 rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8) lwz r8,TI_CPU(r8)
...@@ -658,9 +662,9 @@ _GLOBAL(invalidate_dcache_range) ...@@ -658,9 +662,9 @@ _GLOBAL(invalidate_dcache_range)
#ifdef CONFIG_NOT_COHERENT_CACHE #ifdef CONFIG_NOT_COHERENT_CACHE
/* /*
* 40x cores have 8K or 16K dcache and 32 byte line size. * 40x cores have 8K or 16K dcache and 32 byte line size.
* 440 has a 32K dcache and 32 byte line size. * 44x has a 32K dcache and 32 byte line size.
* 8xx has 1, 2, 4, 8K variants. * 8xx has 1, 2, 4, 8K variants.
* For now, cover the worst case of the 440. * For now, cover the worst case of the 44x.
* Must be called with external interrupts disabled. * Must be called with external interrupts disabled.
*/ */
#define CACHE_NWAYS 64 #define CACHE_NWAYS 64
......
arch/ppc/kernel/ppc_ksyms.c
View file @ ac86c82c
...@@ -155,6 +155,9 @@ EXPORT_SYMBOL(_outsl_ns); ...@@ -155,6 +155,9 @@ EXPORT_SYMBOL(_outsl_ns);
EXPORT_SYMBOL(iopa); EXPORT_SYMBOL(iopa);
EXPORT_SYMBOL(mm_ptov); EXPORT_SYMBOL(mm_ptov);
EXPORT_SYMBOL(ioremap); EXPORT_SYMBOL(ioremap);
#ifdef CONFIG_44x
EXPORT_SYMBOL(ioremap64);
#endif
EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
...@@ -353,7 +356,7 @@ EXPORT_SYMBOL(debugger_fault_handler); ...@@ -353,7 +356,7 @@ EXPORT_SYMBOL(debugger_fault_handler);
EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_install_handler);
EXPORT_SYMBOL(cpm_free_handler); EXPORT_SYMBOL(cpm_free_handler);
#endif /* CONFIG_8xx */ #endif /* CONFIG_8xx */
#if defined(CONFIG_8xx) || defined(CONFIG_40x) #if defined(CONFIG_8xx) || defined(CONFIG_4xx)
EXPORT_SYMBOL(__res); EXPORT_SYMBOL(__res);
#endif #endif
#if defined(CONFIG_8xx) #if defined(CONFIG_8xx)
......
arch/ppc/mm/44x_mmu.c 0 → 100644
View file @ ac86c82c
/*
* Modifications by Matt Porter (mporter@mvista.com) to support
* PPC44x Book E processors.
*
* This file contains the routines for initializing the MMU
* on the 4xx series of chips.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/config.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include "mmu_decl.h"
#include "mem_pieces.h"
extern char etext[], _stext[];
extern struct mem_pieces phys_avail;
/* Used by the 44x TLB replacement exception handler.
* Just needed it declared someplace.
*/
unsigned int tlb_44x_index = 0;
unsigned int tlb_44x_hwater = 61;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
*/
static void __init
ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
{
unsigned long attrib;
__asm__ __volatile__("\
clrrwi %2,%2,10\n\
ori %2,%2,%4\n\
clrrwi %1,%1,10\n\
li %0,0\n\
ori %0,%0,%5\n\
tlbwe %2,%3,%6\n\
tlbwe %1,%3,%7\n\
tlbwe %0,%3,%8"
:
: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
"i" (PPC44x_TLB_VALID | PPC44x_TLB_PAGESZ(PPC44x_PAGESZ_256M)),
"i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
"i" (PPC44x_TLB_PAGEID),
"i" (PPC44x_TLB_XLAT),
"i" (PPC44x_TLB_ATTRIB));
}
/*
* Configure PPC44x TLB for AS0 exception processing.
*/
static void __init
ppc44x_tlb_config(void)
{
unsigned int pinned_tlbs = 1;
int i;
/*
* If lowmem is not on a pin tlb entry size boundary,
* then reserve the last page of system memory. This
* eliminates the possibility of a speculative dcache
* fetch past the end of system memory that would
* result in a machine check exception.
*/
if (total_lowmem | (PPC44x_PIN_SIZE - 1))
mem_pieces_remove(&phys_avail, total_lowmem - PAGE_SIZE, PAGE_SIZE, 1);
/* Determine number of entries necessary to cover lowmem */
pinned_tlbs = (unsigned int)
(_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT);
/* Write upper watermark to save location */
tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
/* If necessary, set additional pinned TLBs */
if (pinned_tlbs > 1)
for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE;
ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
}
}
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
flush_instruction_cache();
ppc44x_tlb_config();
}
/* TODO: Add large page lowmem mapping support */
unsigned long __init mmu_mapin_ram(void)
{
unsigned long v, s, f = _PAGE_GUARDED;
phys_addr_t p;
v = KERNELBASE;
p = PPC_MEMSTART;
for (s = 0; s < total_lowmem; s += PAGE_SIZE) {
if ((char *) v >= _stext && (char *) v < etext)
f |= _PAGE_RAM_TEXT;
else
f |= _PAGE_RAM;
map_page(v, p, f);
v += PAGE_SIZE;
p += PAGE_SIZE;
}
if (ppc_md.progress)
ppc_md.progress("MMU:mmu_mapin_ram done", 0x401);
return s;
}
arch/ppc/mm/Makefile
View file @ ac86c82c
...@@ -11,4 +11,5 @@ obj-y := fault.o init.o mem_pieces.o extable.o \ ...@@ -11,4 +11,5 @@ obj-y := fault.o init.o mem_pieces.o extable.o \
obj-$(CONFIG_PPC_STD_MMU) += hashtable.o ppc_mmu.o tlb.o obj-$(CONFIG_PPC_STD_MMU) += hashtable.o ppc_mmu.o tlb.o
obj-$(CONFIG_40x) += 4xx_mmu.o obj-$(CONFIG_40x) += 4xx_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += cachemap.o obj-$(CONFIG_NOT_COHERENT_CACHE) += cachemap.o
arch/ppc/mm/cachemap.c
View file @ ac86c82c
...@@ -48,7 +48,7 @@ ...@@ -48,7 +48,7 @@
#include <asm/smp.h> #include <asm/smp.h>
#include <asm/machdep.h> #include <asm/machdep.h>
int map_page(unsigned long va, unsigned long pa, int flags); int map_page(unsigned long va, phys_addr_t pa, int flags);
/* This function will allocate the requested contiguous pages and /* This function will allocate the requested contiguous pages and
* map them into the kernel's vmalloc() space. This is done so we * map them into the kernel's vmalloc() space. This is done so we
...@@ -61,7 +61,8 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) ...@@ -61,7 +61,8 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
{ {
int order, err; int order, err;
struct page *page, *free, *end; struct page *page, *free, *end;
unsigned long pa, flags, offset; phys_addr_t pa;
unsigned long flags, offset;
struct vm_struct *area = NULL; struct vm_struct *area = NULL;
unsigned long va = 0; unsigned long va = 0;
......
arch/ppc/mm/init.c
View file @ ac86c82c
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
* and Cort Dougan (PReP) (cort@cs.nmt.edu) * and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras * Copyright (C) 1996 Paul Mackerras
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
* PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
* *
* Derived from "arch/i386/mm/init.c" * Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
......
arch/ppc/mm/mmu_decl.h
View file @ ac86c82c
...@@ -20,9 +20,10 @@ ...@@ -20,9 +20,10 @@
* *
*/ */
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
#include <asm/mmu.h>
extern void mapin_ram(void); extern void mapin_ram(void);
extern int map_page(unsigned long va, unsigned long pa, int flags); extern int map_page(unsigned long va, phys_addr_t pa, int flags);
extern void setbat(int index, unsigned long virt, unsigned long phys, extern void setbat(int index, unsigned long virt, unsigned long phys,
unsigned int size, int flags); unsigned int size, int flags);
extern void reserve_phys_mem(unsigned long start, unsigned long size); extern void reserve_phys_mem(unsigned long start, unsigned long size);
......
arch/ppc/mm/pgtable.c
View file @ ac86c82c
...@@ -55,11 +55,18 @@ void setbat(int index, unsigned long virt, unsigned long phys, ...@@ -55,11 +55,18 @@ void setbat(int index, unsigned long virt, unsigned long phys,
#define p_mapped_by_bats(x) (0UL) #define p_mapped_by_bats(x) (0UL)
#endif /* HAVE_BATS */ #endif /* HAVE_BATS */
#ifdef CONFIG_44x
/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
#define PGDIR_ORDER 1
#else
#define PGDIR_ORDER 0
#endif
pgd_t *pgd_alloc(struct mm_struct *mm) pgd_t *pgd_alloc(struct mm_struct *mm)
{ {
pgd_t *ret; pgd_t *ret;
if ((ret = (pgd_t *)__get_free_page(GFP_KERNEL)) != NULL) if ((ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER)) != NULL)
clear_page(ret); clear_page(ret);
return ret; return ret;
} }
...@@ -110,16 +117,33 @@ void pte_free(struct page *pte) ...@@ -110,16 +117,33 @@ void pte_free(struct page *pte)
__free_page(pte); __free_page(pte);
} }
#ifndef CONFIG_44x
void *
ioremap(phys_addr_t addr, unsigned long size)
{
return __ioremap(addr, size, _PAGE_NO_CACHE);
}
#else /* CONFIG_44x */
void * void *
ioremap(unsigned long addr, unsigned long size) ioremap64(unsigned long long addr, unsigned long size)
{ {
return __ioremap(addr, size, _PAGE_NO_CACHE); return __ioremap(addr, size, _PAGE_NO_CACHE);
} }
void * void *
__ioremap(unsigned long addr, unsigned long size, unsigned long flags) ioremap(phys_addr_t addr, unsigned long size)
{
phys_addr_t addr64 = fixup_bigphys_addr(addr, size);;
return ioremap64(addr64, size);
}
#endif /* CONFIG_44x */
void *
__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
{ {
unsigned long p, v, i; unsigned long v, i;
phys_addr_t p;
int err; int err;
/* /*
...@@ -144,7 +168,7 @@ __ioremap(unsigned long addr, unsigned long size, unsigned long flags) ...@@ -144,7 +168,7 @@ __ioremap(unsigned long addr, unsigned long size, unsigned long flags)
*/ */
if ( mem_init_done && (p < virt_to_phys(high_memory)) ) if ( mem_init_done && (p < virt_to_phys(high_memory)) )
{ {
printk("__ioremap(): phys addr %0lx is RAM lr %p\n", p, printk("__ioremap(): phys addr "PTE_FMT" is RAM lr %p\n", p,
__builtin_return_address(0)); __builtin_return_address(0));
return NULL; return NULL;
} }
...@@ -195,7 +219,7 @@ __ioremap(unsigned long addr, unsigned long size, unsigned long flags) ...@@ -195,7 +219,7 @@ __ioremap(unsigned long addr, unsigned long size, unsigned long flags)
} }
out: out:
return (void *) (v + (addr & ~PAGE_MASK)); return (void *) (v + ((unsigned long)addr & ~PAGE_MASK));
} }
void iounmap(void *addr) void iounmap(void *addr)
...@@ -211,7 +235,7 @@ void iounmap(void *addr) ...@@ -211,7 +235,7 @@ void iounmap(void *addr)
} }
int int
map_page(unsigned long va, unsigned long pa, int flags) map_page(unsigned long va, phys_addr_t pa, int flags)
{ {
pmd_t *pd; pmd_t *pd;
pte_t *pg; pte_t *pg;
...@@ -261,7 +285,7 @@ void __init mapin_ram(void) ...@@ -261,7 +285,7 @@ void __init mapin_ram(void)
* virt, phys, size must all be page-aligned. * virt, phys, size must all be page-aligned.
* This should only be called before ioremap is called. * This should only be called before ioremap is called.
*/ */
void __init io_block_mapping(unsigned long virt, unsigned long phys, void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
unsigned int size, int flags) unsigned int size, int flags)
{ {
int i; int i;
......
arch/ppc/ocp/ocp-probe.c
View file @ ac86c82c
...@@ -62,7 +62,6 @@ ocp_setup_dev(struct ocp_def *odef, unsigned int index) ...@@ -62,7 +62,6 @@ ocp_setup_dev(struct ocp_def *odef, unsigned int index)
(unsigned long) dev->paddr, dev->irq, dev->pm); (unsigned long) dev->paddr, dev->irq, dev->pm);
/* now put in global tree */ /* now put in global tree */
strcpy(dev->dev.name, dev->name);
sprintf(dev->dev.bus_id, "%d", index); sprintf(dev->dev.bus_id, "%d", index);
dev->dev.parent = ocp_bus; dev->dev.parent = ocp_bus;
dev->dev.bus = &ocp_bus_type; dev->dev.bus = &ocp_bus_type;
...@@ -80,7 +79,7 @@ static struct device * __devinit ocp_alloc_primary_bus(void) ...@@ -80,7 +79,7 @@ static struct device * __devinit ocp_alloc_primary_bus(void)
return NULL; return NULL;
memset(b, 0, sizeof(struct device)); memset(b, 0, sizeof(struct device));
strcpy(b->bus_id, "ocp"); strcpy(b->bus_id, "ocp");
strcpy(b->name, "Host/OCP Bridge");
device_register(b); device_register(b);
return b; return b;
......
arch/ppc/platforms/4xx/Kconfig
View file @ ac86c82c
config 4xx config 4xx
bool bool
depends on 40x depends on 40x || 44x
default y default y
menu "IBM 4xx options" menu "IBM 4xx options"
...@@ -57,6 +57,23 @@ config WALNUT ...@@ -57,6 +57,23 @@ config WALNUT
endchoice endchoice
choice
prompt "Machine Type"
depends on 44x
default EBONY
config EBONY
bool "Ebony"
help
This option enables support for the IBM PPC440GP evaluation board.
config OCOTEA
bool "Ocotea"
help
This option enables support for the IBM PPC440GX evaluation board.
endchoice
config EP405PC config EP405PC
bool "EP405PC Support" bool "EP405PC Support"
depends on EP405 depends on EP405
...@@ -70,6 +87,26 @@ config NP405H ...@@ -70,6 +87,26 @@ config NP405H
depends on ASH depends on ASH
default y default y
config 440GP
bool
depends on EBONY
default y
config 440GX
bool
depends on OCOTEA
default y
config 440
bool
depends on 440GP
default y
config 440A
bool
depends on 440GX
default y
# All 405-based cores up until the 405GPR and 405EP have this errata. # All 405-based cores up until the 405GPR and 405EP have this errata.
config IBM405_ERR77 config IBM405_ERR77
bool bool
...@@ -82,9 +119,25 @@ config IBM405_ERR51 ...@@ -82,9 +119,25 @@ config IBM405_ERR51
depends on 40x && !405GPR depends on 40x && !405GPR
default y default y
config PIN_TLB
bool
depends on 44x
default y
config BOOKE
bool
depends on 44x
default y
config IBM_OCP config IBM_OCP
bool bool
depends on ASH || BEECH || CEDAR || CPCI405 || EP405 || REDWOOD_4 || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT depends on ASH || BEECH || CEDAR || CPCI405 || EBONY || EP405 || OCOTEA || REDWOOD_4 || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
default y
config IBM_EMAC4
bool
depends on 440GX
default y default y
config NP405L config NP405L
......
arch/ppc/platforms/4xx/Makefile
View file @ ac86c82c
...@@ -5,8 +5,10 @@ obj-$(CONFIG_ASH) += ash.o ...@@ -5,8 +5,10 @@ obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BEECH) += beech.o obj-$(CONFIG_BEECH) += beech.o
obj-$(CONFIG_CEDAR) += cedar.o obj-$(CONFIG_CEDAR) += cedar.o
obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_EP405) += ep405.o
obj-$(CONFIG_OAK) += oak.o obj-$(CONFIG_OAK) += oak.o
obj-$(CONFIG_OCOTEA) += ocotea.o
obj-$(CONFIG_REDWOOD_4) += redwood.o obj-$(CONFIG_REDWOOD_4) += redwood.o
obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_5) += redwood5.o
obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_REDWOOD_6) += redwood6.o
...@@ -21,4 +23,6 @@ obj-$(CONFIG_NP405H) += ibmnp405h.o ...@@ -21,4 +23,6 @@ obj-$(CONFIG_NP405H) += ibmnp405h.o
obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o
obj-$(CONFIG_NP4GS3) += ibmnp4gs.o obj-$(CONFIG_NP4GS3) += ibmnp4gs.o
obj-$(CONFIG_405LP) += ibm405lp.o obj-$(CONFIG_405LP) += ibm405lp.o
obj-$(CONFIG_EBONY) += ibm440gp.o
obj-$(CONFIG_OCOTEA) += ibm440gx.o
obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_405GPR) += ibm405gpr.o
arch/ppc/platforms/4xx/ebony.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/ebony.c
*
* Ebony board specific routines
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h>
/*
* Ebony IRQ triggering/polarity settings
*/
static u_char ebony_IRQ_initsenses[] __initdata = {
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 0: UART 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 1: UART 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 2: IIC 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 3: IIC 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 4: PCI Inb Mess */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 5: PCI Cmd Wrt */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 6: PCI PM */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 7: PCI MSI 0 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 8: PCI MSI 1 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 9: PCI MSI 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 10: MAL TX EOB */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 11: MAL RX EOB */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 12: DMA Chan 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 13: DMA Chan 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 14: DMA Chan 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 15: DMA Chan 3 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 16: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 17: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 18: GPT Timer 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 19: GPT Timer 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 20: GPT Timer 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 21: GPT Timer 3 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 22: GPT Timer 4 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 23: Ext Int 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 24: Ext Int 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 25: Ext Int 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 26: Ext Int 3 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 27: Ext Int 4 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* 28: Ext Int 5 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 29: Ext Int 6 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 30: UIC1 NC Int */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 31: UIC1 Crit Int */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 32: MAL SERR */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 33: MAL TXDE */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 34: MAL RXDE */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 35: ECC Unc Err */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 36: ECC Corr Err */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 37: Ext Bus Ctrl */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 38: Ext Bus Mstr */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 39: OPB->PLB */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 40: PCI MSI 3 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 41: PCI MSI 4 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 42: PCI MSI 5 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 43: PCI MSI 6 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 44: PCI MSI 7 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 45: PCI MSI 8 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 46: PCI MSI 9 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 47: PCI MSI 10 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* 48: PCI MSI 11 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 49: PLB Perf Mon */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 50: Ext Int 7 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 51: Ext Int 8 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 52: Ext Int 9 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 53: Ext Int 10 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 54: Ext Int 11 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 55: Ext Int 12 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 56: Ser ROM Err */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 57: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 58: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 59: PCI Async Err */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 60: EMAC 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 61: EMAC 0 WOL */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 62: EMAC 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* 63: EMAC 1 WOL */
};
extern void abort(void);
/* Global Variables */
bd_t __res;
static void __init
ebony_calibrate_decr(void)
{
unsigned int freq;
/*
* Determine system clock speed
*
* If we are on Rev. B silicon, then use
* default external system clock. If we are
* on Rev. C silicon then errata forces us to
* use the internal clock.
*/
switch (PVR_REV(mfspr(PVR))) {
case PVR_REV(PVR_440GP_RB):
freq = EBONY_440GP_RB_SYSCLK;
break;
case PVR_REV(PVR_440GP_RC1):
default:
freq = EBONY_440GP_RC_SYSCLK;
break;
}
tb_ticks_per_jiffy = freq / HZ;
tb_to_us = mulhwu_scale_factor(freq, 1000000);
/* Set the time base to zero */
mtspr(SPRN_TBWL, 0);
mtspr(SPRN_TBWU, 0);
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
/* Enable decrementer interrupt */
mtspr(SPRN_TCR, TCR_DIE);
}
static int
ebony_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: Ebony\n");
return 0;
}
static inline int
ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 23, 23, 23, 23 }, /* IDSEL 1 - PCI Slot 0 */
{ 24, 24, 24, 24 }, /* IDSEL 2 - PCI Slot 1 */
{ 25, 25, 25, 25 }, /* IDSEL 3 - PCI Slot 2 */
{ 26, 26, 26, 26 }, /* IDSEL 4 - PCI Slot 3 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
#define PCIX_WRITEL(value, offset) \
(writel(value, (u32)pcix_reg_base+offset))
/*
* FIXME: This is only here to "make it work". This will move
* to a ibm_pcix.c which will contain a generic IBM PCIX bridge
* configuration library. -Matt
*/
static void __init
ebony_setup_pcix(void)
{
void *pcix_reg_base;
pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX0_REG_SIZE);
/* Disable all windows */
PCIX_WRITEL(0, PCIX0_POM0SA);
PCIX_WRITEL(0, PCIX0_POM1SA);
PCIX_WRITEL(0, PCIX0_POM2SA);
PCIX_WRITEL(0, PCIX0_PIM0SA);
PCIX_WRITEL(0, PCIX0_PIM1SA);
PCIX_WRITEL(0, PCIX0_PIM2SA);
/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
eieio();
}
static void __init
ebony_setup_hose(void)
{
struct pci_controller *hose;
/* Configure windows on the PCI-X host bridge */
ebony_setup_pcix();
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
EBONY_PCI_LOWER_IO,
EBONY_PCI_UPPER_IO,
IORESOURCE_IO,
"PCI host bridge");
pci_init_resource(&hose->mem_resources[0],
EBONY_PCI_LOWER_MEM,
EBONY_PCI_UPPER_MEM,
IORESOURCE_MEM,
"PCI host bridge");
hose->io_space.start = EBONY_PCI_LOWER_IO;
hose->io_space.end = EBONY_PCI_UPPER_IO;
hose->mem_space.start = EBONY_PCI_LOWER_MEM;
hose->mem_space.end = EBONY_PCI_UPPER_MEM;
isa_io_base =
(unsigned long)ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
hose->io_base_virt = (void *)isa_io_base;
setup_indirect_pci(hose,
EBONY_PCI_CFGA_PLB32,
EBONY_PCI_CFGD_PLB32);
hose->set_cfg_type = 1;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = ebony_map_irq;
}
TODC_ALLOC();
static void __init
ebony_early_serial_map(void)
{
struct uart_port port;
/* Setup ioremapped serial port access */
memset(&port, 0, sizeof(port));
port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
port.irq = 0;
port.uartclk = BASE_BAUD * 16;
port.regshift = 0;
port.iotype = SERIAL_IO_MEM;
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
port.irq = 1;
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
}
static void __init
ebony_setup_arch(void)
{
unsigned char * vpd_base;
struct ibm440gp_clocks clocks;
#if !defined(CONFIG_BDI_SWITCH)
/*
* The Abatron BDI JTAG debugger does not tolerate others
* mucking with the debug registers.
*/
mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
#endif
/* Retrieve MAC addresses */
vpd_base = ioremap64(EBONY_VPD_BASE, EBONY_VPD_SIZE);
memcpy(__res.bi_enetaddr[0],EBONY_NA0_ADDR(vpd_base),6);
memcpy(__res.bi_enetaddr[1],EBONY_NA1_ADDR(vpd_base),6);
/*
* Determine various clocks.
* To be completely correct we should get SysClk
* from FPGA, because it can be changed by on-board switches
* --ebs
*/
ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
__res.bi_opb_busfreq = clocks.opb;
/* Use IIC in standard (100 kHz) mode */
__res.bi_iic_fast[0] = __res.bi_iic_fast[1] = 0;
/* Setup TODC access */
TODC_INIT(TODC_TYPE_DS1743,
0,
0,
ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
8);
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
/* Setup PCI host bridge */
ebony_setup_hose();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
#ifdef CONFIG_VT
conswitchp = &dummy_con;
#endif
ebony_early_serial_map();
ibm4xxPIC_InitSenses = ebony_IRQ_initsenses;
ibm4xxPIC_NumInitSenses = sizeof(ebony_IRQ_initsenses);
/* Identify the system */
printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
}
static void
ebony_restart(char *cmd)
{
local_irq_disable();
abort();
}
static void
ebony_power_off(void)
{
local_irq_disable();
for(;;);
}
static void
ebony_halt(void)
{
local_irq_disable();
for(;;);
}
/*
* Read the 440GP memory controller to get size of system memory.
*/
static unsigned long __init
ebony_find_end_of_memory(void)
{
u32 i, bank_config;
u32 mem_size = 0;
for (i=0; i<4; i++)
{
switch (i)
{
case 0:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
break;
case 1:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
break;
case 2:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
break;
case 3:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
break;
}
bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
continue;
switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
{
case SDRAM_CONFIG_SIZE_8M:
mem_size += PPC44x_MEM_SIZE_8M;
break;
case SDRAM_CONFIG_SIZE_16M:
mem_size += PPC44x_MEM_SIZE_16M;
break;
case SDRAM_CONFIG_SIZE_32M:
mem_size += PPC44x_MEM_SIZE_32M;
break;
case SDRAM_CONFIG_SIZE_64M:
mem_size += PPC44x_MEM_SIZE_64M;
break;
case SDRAM_CONFIG_SIZE_128M:
mem_size += PPC44x_MEM_SIZE_128M;
break;
case SDRAM_CONFIG_SIZE_256M:
mem_size += PPC44x_MEM_SIZE_256M;
break;
case SDRAM_CONFIG_SIZE_512M:
mem_size += PPC44x_MEM_SIZE_512M;
break;
}
}
return mem_size;
}
static void __init
ebony_init_irq(void)
{
int i;
ppc4xx_pic_init();
for (i = 0; i < NR_IRQS; i++)
irq_desc[i].handler = ppc4xx_pic;
}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
static struct serial_state rs_table[RS_TABLE_SIZE] = {
SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */
};
static void
ebony_progress(char *s, unsigned short hex)
{
volatile char c;
volatile unsigned long com_port;
u16 shift;
com_port = (unsigned long)rs_table[0].iomem_base;
shift = rs_table[0].iomem_reg_shift;
while ((c = *s++) != 0) {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = c;
}
/* Send LF/CR to pretty up output */
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\r';
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\n';
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
parse_bootinfo((struct bi_record *) (r3 + KERNELBASE));
ppc_md.setup_arch = ebony_setup_arch;
ppc_md.show_cpuinfo = ebony_show_cpuinfo;
ppc_md.init_IRQ = ebony_init_irq;
ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
ppc_md.find_end_of_memory = ebony_find_end_of_memory;
ppc_md.restart = ebony_restart;
ppc_md.power_off = ebony_power_off;
ppc_md.halt = ebony_halt;
ppc_md.calibrate_decr = ebony_calibrate_decr;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = ebony_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = ebony_early_serial_map;
#endif
}
arch/ppc/platforms/4xx/ebony.h 0 → 100755
View file @ ac86c82c
/*
* arch/ppc/platforms/ebony.h
*
* Ebony board definitions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_EBONY_H__
#define __ASM_EBONY_H__
#include <linux/config.h>
#include <platforms/4xx/ibm440gp.h>
/* F/W TLB mapping used in bootloader glue to reset EMAC */
#define PPC44x_EMAC0_MR0 0xE0000800
/* Macros to get at Ebony VPD info */
#define EBONY_VPD_BASE 0x00000001fffffe00ULL
#define EBONY_VPD_SIZE 0x24
#define EBONY_NA0_OFFSET 0x0c
#define EBONY_NA1_OFFSET 0x18
#define EBONY_NA0_ADDR(base) (base + EBONY_NA0_OFFSET)
#define EBONY_NA1_ADDR(base) (base + EBONY_NA1_OFFSET)
/* Default clock rates for Rev. B and Rev. C silicon */
#define EBONY_440GP_RB_SYSCLK 33000000
#define EBONY_440GP_RC_SYSCLK 400000000
/* RTC/NVRAM location */
#define EBONY_RTC_ADDR 0x0000000148000000ULL
#define EBONY_RTC_SIZE 0x2000
/* Flash */
#define EBONY_FPGA_ADDR 0x0000000148300000
#define EBONY_BOOT_SMALL_FLASH(x) (x & 0x20)
#define EBONY_ONBRD_FLASH_EN(x) (x & 0x02)
#define EBONY_FLASH_SEL(x) (x & 0x01)
#define EBONY_SMALL_FLASH_LOW1 0x00000001ff800000
#define EBONY_SMALL_FLASH_LOW2 0x00000001ff880000
#define EBONY_SMALL_FLASH_HIGH1 0x00000001fff00000
#define EBONY_SMALL_FLASH_HIGH2 0x00000001fff80000
#define EBONY_SMALL_FLASH_SIZE 0x80000
#define EBONY_LARGE_FLASH_LOW 0x00000001ff800000
#define EBONY_LARGE_FLASH_HIGH 0x00000001ffc00000
#define EBONY_LARGE_FLASH_SIZE 0x400000
#define EBONY_SMALL_FLASH_BASE 0x00000001fff80000
#define EBONY_LARGE_FLASH_BASE 0x00000001ff800000
/*
* Serial port defines
*/
/* OpenBIOS defined UART mappings, used before early_serial_setup */
#define UART0_IO_BASE (u8 *) 0xE0000200
#define UART1_IO_BASE (u8 *) 0xE0000300
#define BASE_BAUD 33000000/3/16
#define UART0_INT 0
#define UART1_INT 1
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
/* PCI support */
#define EBONY_PCI_LOWER_IO 0x00000000
#define EBONY_PCI_UPPER_IO 0x0000ffff
#define EBONY_PCI_LOWER_MEM 0x80002000
#define EBONY_PCI_UPPER_MEM 0xffffefff
#define EBONY_PCI_CFGREGS_BASE 0x000000020ec00000
#define EBONY_PCI_CFGA_PLB32 0x0ec00000
#define EBONY_PCI_CFGD_PLB32 0x0ec00004
#define EBONY_PCI_IO_BASE 0x0000000208000000ULL
#define EBONY_PCI_IO_SIZE 0x00010000
#define EBONY_PCI_MEM_OFFSET 0x00000000
#endif /* __ASM_EBONY_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibm440gp.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/4xx/ibm440gp.c
*
* PPC440GP I/O descriptions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <platforms/4xx/ibm440gp.h>
#include <asm/ocp.h>
#include <linux/init.h>
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_OPB, PPC440GP_OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, PPC440GP_UART0_ADDR, UART0_INT, IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, PPC440GP_UART1_ADDR, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, PPC440GP_IIC0_ADDR, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, PPC440GP_IIC1_ADDR, IIC1_IRQ, IBM_CPM_IIC1},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, PPC440GP_GPIO0_ADDR, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, PPC440GP_EMAC0_ADDR, BL_MAC_ETH0, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, PPC440GP_EMAC1_ADDR, BL_MAC_ETH1, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_ZMII, PPC440GP_ZMII_ADDR, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibm440gp.h 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/4xx/ibm440gp.h
*
* PPC440GP definitions
*
* Roland Dreier <roland@digitalvampire.org>
*
* Copyright 2002 Roland Dreier
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This file contains code that was originally in the files ibm44x.h
* and ebony.h, which were written by Matt Porter of MontaVista Software Inc.
*/
#ifdef __KERNEL__
#ifndef __PPC_PLATFORMS_IBM440GP_H
#define __PPC_PLATFORMS_IBM440GP_H
#include <linux/config.h>
#define EMAC_NUMS 2
#define UART_NUMS 2
#define ZMII_NUMS 1
#define IIC_NUMS 2
#define IIC0_IRQ 2
#define IIC1_IRQ 3
#define GPIO_NUMS 1
/* UART location */
#define PPC440GP_UART0_ADDR 0x0000000140000200ULL
#define PPC440GP_UART1_ADDR 0x0000000140000300ULL
/* EMAC location */
#define PPC440GP_EMAC0_ADDR 0x0000000140000800ULL
#define PPC440GP_EMAC1_ADDR 0x0000000140000900ULL
#define PPC440GP_EMAC_SIZE 0x70
/* EMAC IRQ's */
#define BL_MAC_WOL 61 /* WOL */
#define BL_MAC_WOL1 63 /* WOL */
#define BL_MAL_SERR 32 /* MAL SERR */
#define BL_MAL_TXDE 33 /* MAL TXDE */
#define BL_MAL_RXDE 34 /* MAL RXDE */
#define BL_MAL_TXEOB 10 /* MAL TX EOB */
#define BL_MAL_RXEOB 11 /* MAL RX EOB */
#define BL_MAC_ETH0 60 /* MAC */
#define BL_MAC_ETH1 62 /* MAC */
/* ZMII location */
#define PPC440GP_ZMII_ADDR 0x0000000140000780ULL
#define PPC440GP_ZMII_SIZE 0x0c
/* I2C location */
#define PPC440GP_IIC0_ADDR 0x40000400
#define PPC440GP_IIC1_ADDR 0x40000500
/* GPIO location */
#define PPC440GP_GPIO0_ADDR 0x0000000140000700ULL
/* Clock and Power Management */
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
#define IBM_CPM_CPU 0x02000000 /* processor core */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI)
#define PPC440GP_OPB_BASE_START 0x0000000140000000ULL
/*
* Serial port defines
*/
#define RS_TABLE_SIZE 2
#include <asm/ibm44x.h>
#include <syslib/ibm440gp_common.h>
#endif /* __PPC_PLATFORMS_IBM440GP_H */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibm440gx.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/ibm440gx.c
*
* PPC440GX I/O descriptions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002-2003 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/param.h>
#include <linux/string.h>
#include <asm/ocp.h>
#include <platforms/4xx/ibm440gx.h>
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_OPB, PPC440GX_OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, PPC440GX_UART0_ADDR, UART0_IRQ, IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, PPC440GX_UART1_ADDR, UART1_IRQ, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, PPC440GX_IIC0_ADDR, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, PPC440GX_IIC1_ADDR, IIC1_IRQ, IBM_CPM_IIC1},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, PPC440GX_GPIO0_ADDR, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, PPC440GX_EMAC0_ADDR, BL_MAC_ETH0, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, PPC440GX_EMAC1_ADDR, BL_MAC_ETH1, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_ZMII, PPC440GX_ZMII_ADDR, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibm440gx.h 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/ibm440gx.h
*
* PPC440GX definitions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002 Roland Dreier
* Copyright 2003 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifdef __KERNEL__
#ifndef __PPC_PLATFORMS_IBM440GX_H
#define __PPC_PLATFORMS_IBM440GX_H
#include <linux/config.h>
#include <asm/ibm44x.h>
/* UART */
#define PPC440GX_UART0_ADDR 0x0000000140000200ULL
#define PPC440GX_UART1_ADDR 0x0000000140000300ULL
#define UART0_IRQ 0
#define UART1_IRQ 1
/* EMAC */
#define PPC440GX_EMAC0_ADDR 0x0000000140000800ULL
#define PPC440GX_EMAC1_ADDR 0x0000000140000900ULL
#define PPC440GX_EMAC2_ADDR 0x0000000140000C00ULL
#define PPC440GX_EMAC3_ADDR 0x0000000140000E00ULL
#define PPC440GX_EMAC_SIZE 0xFC
#define EMAC_NUMS 2
#define BL_MAC_WOL 61 /* WOL */
#define BL_MAC_WOL1 63 /* WOL */
#define BL_MAC_WOL2 65 /* WOL */
#define BL_MAC_WOL3 67 /* WOL */
#define BL_MAL_SERR 32 /* MAL SERR */
#define BL_MAL_TXDE 33 /* MAL TXDE */
#define BL_MAL_RXDE 34 /* MAL RXDE */
#define BL_MAL_TXEOB 10 /* MAL TX EOB */
#define BL_MAL_RXEOB 11 /* MAL RX EOB */
#define BL_MAC_ETH0 60 /* MAC */
#define BL_MAC_ETH1 62 /* MAC */
#define BL_MAC_ETH2 64 /* MAC */
#define BL_MAC_ETH3 66 /* MAC */
#define BL_TAH0 68 /* TAH 0 */
#define BL_TAH1 69 /* TAH 1 */
/* TAH */
#define PPC440GX_TAH0_ADDR 0x0000000140000B00ULL
#define PPC440GX_TAH1_ADDR 0x0000000140000D00ULL
#define PPC440GX_TAH_SIZE 0xFC
/* ZMII */
#define PPC440GX_ZMII_ADDR 0x0000000140000780ULL
#define PPC440GX_ZMII_SIZE 0x0c
/* RGMII */
#define PPC440GX_RGMII_ADDR 0x0000000140000790ULL
#define PPC440GX_RGMII_SIZE 0x0c
/* IIC */
#define PPC440GX_IIC0_ADDR 0x40000400
#define PPC440GX_IIC1_ADDR 0x40000500
#define IIC0_IRQ 2
#define IIC1_IRQ 3
/* GPIO */
#define PPC440GX_GPIO0_ADDR 0x0000000140000700ULL
/* Clock and Power Management */
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
#define IBM_CPM_RGMII 0x10000000 /* RGMII */
#define IBM_CPM_TAHOE0 0x08000000 /* TAHOE 0 */
#define IBM_CPM_TAHOE1 0x04000000 /* TAHOE 1 */
#define IBM_CPM_CPU 0x02000000 /* processor core */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */
#define IBM_CPM_EMAC1 0x00000010 /* EMAC 1 */
#define IBM_CPM_EMAC2 0x00000008 /* EMAC 2 */
#define IBM_CPM_EMAC3 0x00000004 /* EMAC 3 */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
/* OPB */
#define PPC440GX_OPB_BASE_START 0x0000000140000000ULL
/*
* Serial port defines
*/
#define RS_TABLE_SIZE 2
#endif /* __PPC_PLATFORMS_IBM440GX_H */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ocotea.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/ocotea.c
*
* Ocotea board specific routines
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2003 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h>
extern void abort(void);
/* Global Variables */
bd_t __res;
static void __init
ocotea_calibrate_decr(void)
{
unsigned int freq;
freq = OCOTEA_SYSCLK;
tb_ticks_per_jiffy = freq / HZ;
tb_to_us = mulhwu_scale_factor(freq, 1000000);
/* Set the time base to zero */
mtspr(SPRN_TBWL, 0);
mtspr(SPRN_TBWU, 0);
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
/* Enable decrementer interrupt */
mtspr(SPRN_TCR, TCR_DIE);
}
static int
ocotea_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
return 0;
}
static inline int
ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 23, 23, 23, 23 }, /* IDSEL 1 - PCI Slot 0 */
{ 24, 24, 24, 24 }, /* IDSEL 2 - PCI Slot 1 */
{ 25, 25, 25, 25 }, /* IDSEL 3 - PCI Slot 2 */
{ 26, 26, 26, 26 }, /* IDSEL 4 - PCI Slot 3 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
#define PCIX_READW(offset) \
(readw((u32)pcix_reg_base+offset))
#define PCIX_WRITEW(value, offset) \
(writew(value, (u32)pcix_reg_base+offset))
#define PCIX_WRITEL(value, offset) \
(writel(value, (u32)pcix_reg_base+offset))
/*
* FIXME: This is only here to "make it work". This will move
* to a ibm_pcix.c which will contain a generic IBM PCIX bridge
* configuration library. -Matt
*/
static void __init
ocotea_setup_pcix(void)
{
void *pcix_reg_base;
pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX0_REG_SIZE);
/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
/* Disable all windows */
PCIX_WRITEL(0, PCIX0_POM0SA);
PCIX_WRITEL(0, PCIX0_POM1SA);
PCIX_WRITEL(0, PCIX0_POM2SA);
PCIX_WRITEL(0, PCIX0_PIM0SA);
PCIX_WRITEL(0, PCIX0_PIM0SAH);
PCIX_WRITEL(0, PCIX0_PIM1SA);
PCIX_WRITEL(0, PCIX0_PIM2SA);
PCIX_WRITEL(0, PCIX0_PIM2SAH);
/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
eieio();
}
static void __init
ocotea_setup_hose(void)
{
struct pci_controller *hose;
/* Configure windows on the PCI-X host bridge */
ocotea_setup_pcix();
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
OCOTEA_PCI_LOWER_IO,
OCOTEA_PCI_UPPER_IO,
IORESOURCE_IO,
"PCI host bridge");
pci_init_resource(&hose->mem_resources[0],
OCOTEA_PCI_LOWER_MEM,
OCOTEA_PCI_UPPER_MEM,
IORESOURCE_MEM,
"PCI host bridge");
hose->io_space.start = OCOTEA_PCI_LOWER_IO;
hose->io_space.end = OCOTEA_PCI_UPPER_IO;
hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
isa_io_base =
(unsigned long)ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
hose->io_base_virt = (void *)isa_io_base;
setup_indirect_pci(hose,
OCOTEA_PCI_CFGA_PLB32,
OCOTEA_PCI_CFGD_PLB32);
hose->set_cfg_type = 1;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = ocotea_map_irq;
}
TODC_ALLOC();
static void __init
ocotea_early_serial_map(void)
{
struct uart_port port;
/* Setup ioremapped serial port access */
memset(&port, 0, sizeof(port));
port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
port.irq = 0;
port.uartclk = BASE_BAUD * 16;
port.regshift = 0;
port.iotype = SERIAL_IO_MEM;
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
port.irq = 1;
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
}
static void __init
ocotea_setup_arch(void)
{
unsigned char *addr;
unsigned long long mac64;
/* Retrieve MAC addresses from flash */
addr = ioremap64(OCOTEA_MAC_BASE, OCOTEA_MAC_SIZE);
mac64 = simple_strtoull(addr, 0, 16);
memcpy(__res.bi_enetaddr[0], (char *)&mac64+2, 6);
mac64 = simple_strtoull(addr+OCOTEA_MAC1_OFFSET, 0, 16);
memcpy(__res.bi_enetaddr[1], (char *)&mac64+2, 6);
iounmap(addr);
#if !defined(CONFIG_BDI_SWITCH)
/*
* The Abatron BDI JTAG debugger does not tolerate others
* mucking with the debug registers.
*/
mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
#endif
/* Setup TODC access */
TODC_INIT(TODC_TYPE_DS1743,
0,
0,
ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
8);
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
/* Setup PCI host bridge */
ocotea_setup_hose();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
ocotea_early_serial_map();
/* Identify the system */
printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
}
static void
ocotea_restart(char *cmd)
{
local_irq_disable();
abort();
}
static void
ocotea_power_off(void)
{
local_irq_disable();
for(;;);
}
static void
ocotea_halt(void)
{
local_irq_disable();
for(;;);
}
/*
* Read the 440GX memory controller to get size of system memory.
*/
static unsigned long __init
ocotea_find_end_of_memory(void)
{
u32 i, bank_config;
u32 mem_size = 0;
for (i=0; i<4; i++)
{
switch (i)
{
case 0:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
break;
case 1:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
break;
case 2:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
break;
case 3:
mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
break;
}
bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
continue;
switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
{
case SDRAM_CONFIG_SIZE_8M:
mem_size += PPC44x_MEM_SIZE_8M;
break;
case SDRAM_CONFIG_SIZE_16M:
mem_size += PPC44x_MEM_SIZE_16M;
break;
case SDRAM_CONFIG_SIZE_32M:
mem_size += PPC44x_MEM_SIZE_32M;
break;
case SDRAM_CONFIG_SIZE_64M:
mem_size += PPC44x_MEM_SIZE_64M;
break;
case SDRAM_CONFIG_SIZE_128M:
mem_size += PPC44x_MEM_SIZE_128M;
break;
case SDRAM_CONFIG_SIZE_256M:
mem_size += PPC44x_MEM_SIZE_256M;
break;
case SDRAM_CONFIG_SIZE_512M:
mem_size += PPC44x_MEM_SIZE_512M;
break;
}
}
return mem_size;
}
static void __init
ocotea_init_irq(void)
{
int i;
/* Enable PPC440GP interrupt compatibility mode */
SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) | DCRN_SDR_MFR_PCM);
ppc4xx_pic_init();
for (i = 0; i < NR_IRQS; i++)
irq_desc[i].handler = ppc4xx_pic;
}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
struct serial_state rs_table[RS_TABLE_SIZE] = {
SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */
};
static void
ocotea_progress(char *s, unsigned short hex)
{
volatile char c;
volatile unsigned long com_port;
u16 shift;
com_port = (unsigned long)rs_table[0].iomem_base;
shift = rs_table[0].iomem_reg_shift;
while ((c = *s++) != 0) {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = c;
}
/* Send LF/CR to pretty up output */
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\r';
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\n';
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#if 0
static void __init
ocotea_map_io(void)
{
io_block_mapping(0xe0000000, 0x0000000140000000,
0x00001000, _PAGE_IO);
}
#endif
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
parse_bootinfo((struct bi_record *) (r3 + KERNELBASE));
ppc_md.setup_arch = ocotea_setup_arch;
ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
ppc_md.init_IRQ = ocotea_init_irq;
ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
ppc_md.find_end_of_memory = ocotea_find_end_of_memory;
ppc_md.restart = ocotea_restart;
ppc_md.power_off = ocotea_power_off;
ppc_md.halt = ocotea_halt;
ppc_md.calibrate_decr = ocotea_calibrate_decr;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = ocotea_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = ocotea_early_serial_map;
#endif
}
arch/ppc/platforms/4xx/ocotea.h 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/platforms/ocotea.h
*
* Ocotea board definitions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2003 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifdef __KERNEL__
#ifndef __ASM_OCOTEA_H__
#define __ASM_OCOTEA_H__
#include <linux/config.h>
#include <platforms/4xx/ibm440gx.h>
/* F/W TLB mapping used in bootloader glue to reset EMAC */
#define PPC44x_EMAC0_MR0 0xE0000800
/* Location of MAC addresses in firmware */
#define OCOTEA_MAC_BASE (OCOTEA_SMALL_FLASH_HIGH+0xc0500)
#define OCOTEA_MAC_SIZE 0x200
#define OCOTEA_MAC1_OFFSET 0x100
/* Default clock rate */
#define OCOTEA_SYSCLK 25000000
/* RTC/NVRAM location */
#define OCOTEA_RTC_ADDR 0x0000000148000000ULL
#define OCOTEA_RTC_SIZE 0x2000
/* Flash */
#define OCOTEA_FPGA_ADDR 0x0000000148300000ULL
#define OCOTEA_BOOT_LARGE_FLASH(x) (x & 0x40)
#define OCOTEA_SMALL_FLASH_LOW 0x00000001ff900000ULL
#define OCOTEA_SMALL_FLASH_HIGH 0x00000001fff00000ULL
#define OCOTEA_SMALL_FLASH_SIZE 0x100000
#define OCOTEA_LARGE_FLASH_LOW 0x00000001ff800000ULL
#define OCOTEA_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
#define OCOTEA_LARGE_FLASH_SIZE 0x400000
/*
* Serial port defines
*/
#define RS_TABLE_SIZE 2
/* OpenBIOS defined UART mappings, used before early_serial_setup */
#define UART0_IO_BASE (u8 *) 0xE0000200
#define UART1_IO_BASE (u8 *) 0xE0000300
#define BASE_BAUD 11059200/16
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_IRQ, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
/* PCI support */
#define OCOTEA_PCI_LOWER_IO 0x00000000
#define OCOTEA_PCI_UPPER_IO 0x0000ffff
#define OCOTEA_PCI_LOWER_MEM 0x80000000
#define OCOTEA_PCI_UPPER_MEM 0xffffefff
#define OCOTEA_PCI_CFGREGS_BASE 0x000000020ec00000ULL
#define OCOTEA_PCI_CFGA_PLB32 0x0ec00000
#define OCOTEA_PCI_CFGD_PLB32 0x0ec00004
#define OCOTEA_PCI_IO_BASE 0x0000000208000000ULL
#define OCOTEA_PCI_IO_SIZE 0x00010000
#define OCOTEA_PCI_MEM_OFFSET 0x00000000
#endif /* __ASM_OCOTEA_H__ */
#endif /* __KERNEL__ */
arch/ppc/syslib/Makefile
View file @ ac86c82c
...@@ -13,6 +13,8 @@ CFLAGS_prom_init.o += -mrelocatable-lib ...@@ -13,6 +13,8 @@ CFLAGS_prom_init.o += -mrelocatable-lib
CFLAGS_btext.o += -mrelocatable-lib CFLAGS_btext.o += -mrelocatable-lib
obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
obj-$(CONFIG_44x) += ibm44x_common.o
obj-$(CONFIG_440GP) += ibm440gp_common.o
ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_4xx),y)
obj-$(CONFIG_4xx) += ppc4xx_pic.o obj-$(CONFIG_4xx) += ppc4xx_pic.o
obj-$(CONFIG_40x) += ppc4xx_setup.o obj-$(CONFIG_40x) += ppc4xx_setup.o
...@@ -33,6 +35,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o ...@@ -33,6 +35,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o
obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
todc_time.o todc_time.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_EV64260) += gt64260_common.o gt64260_pic.o \ obj-$(CONFIG_EV64260) += gt64260_common.o gt64260_pic.o \
indirect_pci.o todc_time.o pci_auto.o indirect_pci.o todc_time.o pci_auto.o
obj-$(CONFIG_GEMINI) += open_pic.o i8259.o indirect_pci.o obj-$(CONFIG_GEMINI) += open_pic.o i8259.o indirect_pci.o
...@@ -46,6 +49,7 @@ obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \ ...@@ -46,6 +49,7 @@ obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \
pci_auto.o indirect_pci.o pci_auto.o indirect_pci.o
obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \ obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \
i8259.o pci_auto.o pplus_common.o i8259.o pci_auto.o pplus_common.o
obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_PAL4) += cpc700_pic.o obj-$(CONFIG_PAL4) += cpc700_pic.o
obj-$(CONFIG_PCORE) += mpc10x_common.o todc_time.o i8259.o \ obj-$(CONFIG_PCORE) += mpc10x_common.o todc_time.o i8259.o \
indirect_pci.o pci_auto.o indirect_pci.o pci_auto.o
......
arch/ppc/syslib/ibm440gp_common.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/syslib/ibm440gp_common.c
*
* PPC440GP system library
*
* Matt Porter <mporter@mvista.com>
* Copyright 2002-2003 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003 Zultys Technologies
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <asm/ibm44x.h>
#include <asm/mmu.h>
/*
* Calculate 440GP clocks
*/
void __init ibm440gp_get_clocks(struct ibm440gp_clocks* p,
unsigned int sys_clk,
unsigned int ser_clk)
{
u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
u32 opdv, epdv;
if (cpc0_sys0 & 0x2){
/* Bypass system PLL */
p->cpu = p->plb = sys_clk;
}
else {
u32 fbdv, fwdva, fwdvb, m, vco;
fbdv = (cpc0_sys0 >> 18) & 0x0f;
if (!fbdv)
fbdv = 16;
fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
/* Feedback path */
if (cpc0_sys0 & 0x00000080){
/* PerClk */
m = fwdvb * opdv * epdv;
}
else {
/* CPU clock */
m = fbdv * fwdva;
}
vco = sys_clk * m;
p->cpu = vco / fwdva;
p->plb = vco / fwdvb;
}
opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
p->opb = p->plb / opdv;
p->ebc = p->opb / epdv;
if (cpc0_cr0 & 0x00400000){
/* External UART clock */
p->uart = ser_clk;
}
else {
/* Internal UART clock */
u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
p->uart = p->plb / uart_div;
}
}
arch/ppc/syslib/ibm440gp_common.h 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/syslib/ibm440gp_common.h
*
* PPC440GP system library
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003 Zultys Technologies
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifdef __KERNEL__
#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
#define __PPC_SYSLIB_IBM440GP_COMMON_H
#ifndef __ASSEMBLY__
#include <linux/config.h>
#include <linux/init.h>
/*
* All clocks are in Hz
*/
struct ibm440gp_clocks {
unsigned int cpu; /* CPUCoreClk */
unsigned int plb; /* PLBClk */
unsigned int opb; /* OPBClk */
unsigned int ebc; /* PerClk */
unsigned int uart;
};
/*
* Please, refer to the Figure 13.1 in 440GP user manual
*
* if internal UART clock is used, ser_clk is ignored
*/
void ibm440gp_get_clocks(struct ibm440gp_clocks*, unsigned int sys_clk,
unsigned int ser_clk) __init;
#endif /* __ASSEMBLY__ */
#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
#endif /* __KERNEL__ */
arch/ppc/syslib/ibm44x_common.c 0 → 100644
View file @ ac86c82c
/*
* arch/ppc/syslib/ibm44x_common.c
*
* PPC44x system library
*
* Matt Porter <mporter@mvista.com>
* Copyright 2002-2003 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <asm/ibm44x.h>
#include <asm/mmu.h>
phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
{
phys_addr_t page_4gb = 0;
/*
* Trap the least significant 32-bit portions of an
* address in the 440's 36-bit address space. Fix
* them up with the appropriate ERPN
*/
if ((addr >= PPC44x_IO_LO) && (addr < PPC44x_IO_HI))
page_4gb = PPC44x_IO_PAGE;
else if ((addr >= PPC44x_PCICFG_LO) && (addr < PPC44x_PCICFG_HI))
page_4gb = PPC44x_PCICFG_PAGE;
else if ((addr >= PPC44x_PCIMEM_LO) && (addr < PPC44x_PCIMEM_HI))
page_4gb = PPC44x_PCIMEM_PAGE;
return (page_4gb | addr);
};
include/asm-ppc/ibm44x.h 0 → 100644
View file @ ac86c82c
/*
* include/asm-ppc/ibm44x.h
*
* PPC44x definitions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002-2003 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_IBM44x_H__
#define __ASM_IBM44x_H__
#include <linux/config.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's "Ebony" evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*
* Ebony firmware stores MAC addresses in the F/W VPD area. The
* firmware must store the other dynamic values in NVRAM like on
* the previous 40x systems so they should be accessible if we
* really want them.
*/
typedef struct board_info {
unsigned char bi_enetaddr[2][6]; /* EMAC addresses */
unsigned int bi_opb_busfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
} bd_t;
#endif /* __ASSEMBLY__ */
#ifndef NR_BOARD_IRQS
#define NR_BOARD_IRQS 0
#endif
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#define PCI_DRAM_OFFSET pci_dram_offset
/* TLB entry offset/size used for pinning kernel lowmem */
#define PPC44x_PIN_SHIFT 28
#define PPC44x_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
/* Lowest TLB slot consumed by the default pinned TLBs */
#define PPC44x_LOW_SLOT 62
/*
* Standard 4GB "page" definitions
*/
#define PPC44x_IO_PAGE 0x0000000100000000ULL
#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL
#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
#define PPC44x_PCIMEM_PAGE 0x0000000300000000ULL
/*
* 36-bit trap ranges
*/
#define PPC44x_IO_LO 0x40000000
#define PPC44x_IO_HI 0x40001000
#define PPC44x_PCICFG_LO 0x0ec00000
#define PPC44x_PCICFG_HI 0x0ec7ffff
#define PPC44x_PCIMEM_LO 0x80002000
#define PPC44x_PCIMEM_HI 0xffffffff
/*
* The "residual" board information structure the boot loader passes
* into the kernel.
*/
#ifndef __ASSEMBLY__
/*
* SPRN definitions
*/
#define SPRN_CPC0_GPIO 0xe5/BEARLRL
/*
* DCRN definitions
*/
#ifdef CONFIG_440GX
/* SDRs */
#define DCRN_SDR_CONFIG_ADDR 0xe
#define DCRN_SDR_CONFIG_DATA 0xf
#define DCRN_SDR_PFC0 0x4100
#define DCRN_SDR_PFC1 0x4101
#define DCRN_SDR_MFR 0x4300
#define DCRN_SDR_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
#define DCRN_SDR_MFR_TAH1 0x40000000 /* TAHOE1 Enable */
#define DCRN_SDR_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */
#define DCRN_SDR_MFR_ECS 0x08000000 /* EMAC int clk */
#define DCRN_SDR_MFR_T0TXFL 0x00080000
#define DCRN_SDR_MFR_T0TXFH 0x00040000
#define DCRN_SDR_MFR_T1TXFL 0x00020000
#define DCRN_SDR_MFR_T1TXFH 0x00010000
#define DCRN_SDR_MFR_E0TXFL 0x00008000
#define DCRN_SDR_MFR_E0TXFH 0x00004000
#define DCRN_SDR_MFR_E0RXFL 0x00002000
#define DCRN_SDR_MFR_E0RXFH 0x00001000
#define DCRN_SDR_MFR_E1TXFL 0x00000800
#define DCRN_SDR_MFR_E1TXFH 0x00000400
#define DCRN_SDR_MFR_E1RXFL 0x00000200
#define DCRN_SDR_MFR_E1RXFH 0x00000100
#define DCRN_SDR_MFR_E2TXFL 0x00000080
#define DCRN_SDR_MFR_E2TXFH 0x00000040
#define DCRN_SDR_MFR_E2RXFL 0x00000020
#define DCRN_SDR_MFR_E2RXFH 0x00000010
#define DCRN_SDR_MFR_E3TXFL 0x00000008
#define DCRN_SDR_MFR_E3TXFH 0x00000004
#define DCRN_SDR_MFR_E3RXFL 0x00000002
#define DCRN_SDR_MFR_E3RXFH 0x00000001
/* SDR read/write helper macros */
#define SDR_READ(offset) ({\
mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
mfdcr(DCRN_SDR_CONFIG_DATA);})
#define SDR_WRITE(offset, data) ({\
mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
mtdcr(DCRN_SDR_CONFIG_DATA,data);})
#endif /* CONFIG_440GX */
/* Base DCRNs */
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
#define DCRN_DMA2_BASE 0x110
#define DCRN_DMA3_BASE 0x118
#define DCRN_DMASR_BASE 0x120
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_MAL_BASE 0x180
/* UIC */
#define DCRN_UIC0_BASE 0xc0
#define DCRN_UIC1_BASE 0xd0
#define UIC0 DCRN_UIC0_BASE
#define UIC1 DCRN_UIC1_BASE
#define DCRN_UIC_SR(base) (base + 0x0)
#define DCRN_UIC_ER(base) (base + 0x2)
#define DCRN_UIC_CR(base) (base + 0x3)
#define DCRN_UIC_PR(base) (base + 0x4)
#define DCRN_UIC_TR(base) (base + 0x5)
#define DCRN_UIC_MSR(base) (base + 0x6)
#define DCRN_UIC_VR(base) (base + 0x7)
#define DCRN_UIC_VCR(base) (base + 0x8)
#define UIC0_UIC1NC 30 /* UIC1 non-critical interrupt */
#define UIC0_UIC1CR 31 /* UIC1 critical interrupt */
/* 440GP MAL DCRs */
#define DCRN_MALCR(base) (base + 0x0) /* Configuration */
#define DCRN_MALESR(base) (base + 0x1) /* Error Status */
#define DCRN_MALIER(base) (base + 0x2) /* Interrupt Enable */
#define DCRN_MALTXCASR(base) (base + 0x4) /* Tx Channel Active Set */
#define DCRN_MALTXCARR(base) (base + 0x5) /* Tx Channel Active Reset */
#define DCRN_MALTXEOBISR(base) (base + 0x6) /* Tx End of Buffer Interrupt Status */
#define DCRN_MALTXDEIR(base) (base + 0x7) /* Tx Descriptor Error Interrupt */
#define DCRN_MALRXCASR(base) (base + 0x10) /* Rx Channel Active Set */
#define DCRN_MALRXCARR(base) (base + 0x11) /* Rx Channel Active Reset */
#define DCRN_MALRXEOBISR(base) (base + 0x12) /* Rx End of Buffer Interrupt Status */
#define DCRN_MALRXDEIR(base) (base + 0x13) /* Rx Descriptor Error Interrupt */
#define DCRN_MALTXCTP0R(base) (base + 0x20) /* Channel Tx 0 Channel Table Pointer */
#define DCRN_MALTXCTP1R(base) (base + 0x21) /* Channel Tx 1 Channel Table Pointer */
#define DCRN_MALTXCTP2R(base) (base + 0x22) /* Channel Tx 2 Channel Table Pointer */
#define DCRN_MALTXCTP3R(base) (base + 0x23) /* Channel Tx 3 Channel Table Pointer */
#define DCRN_MALRXCTP0R(base) (base + 0x40) /* Channel Rx 0 Channel Table Pointer */
#define DCRN_MALRXCTP1R(base) (base + 0x41) /* Channel Rx 1 Channel Table Pointer */
#define DCRN_MALRCBS0(base) (base + 0x60) /* Channel Rx 0 Channel Buffer Size */
#define DCRN_MALRCBS1(base) (base + 0x61) /* Channel Rx 1 Channel Buffer Size */
/* Compatibility DCRN's */
#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
#define MALCR_MMSR 0x80000000 /* MAL Software reset */
#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
#define MALCR_PLBP_3 0x00C00000 /* highest */
#define MALCR_GA 0x00200000 /* Guarded Active Bit */
#define MALCR_OA 0x00100000 /* Ordered Active Bit */
#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
#define MALCR_PLBLT_2 0x00020000
#define MALCR_PLBLT_3 0x00010000
#define MALCR_PLBLT_4 0x00008000
#ifdef CONFIG_440GP
#define MALCR_PLBLT_DEFAULT 0x00330000 /* PLB Latency Timer default */
#else
#define MALCR_PLBLT_DEFAULT 0x00ff0000 /* PLB Latency Timer default */
#endif
#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
#define MALCR_LEA 0x00000002 /* Locked Error Active */
#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
/* DCRN_MALESR */
#define MALESR_EVB 0x80000000 /* Error Valid Bit */
#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
#define MALESR_DE 0x00100000 /* Descriptor Error */
#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
#define MALESR_OSE 0x00020000 /* OPB Slave Error */
#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
/* DCRN_MALIER */
#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
/* DCRN_MALTXEOBISR */
#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
/* 440GP PLB Arbiter DCRs */
#define DCRN_PLB0_REVID 0x082 /* PLB Arbiter Revision ID */
#define DCRN_PLB0_ACR 0x083 /* PLB Arbiter Control */
#define DCRN_PLB0_BESR 0x084 /* PLB Error Status */
#define DCRN_PLB0_BEARL 0x086 /* PLB Error Address Low */
#define DCRN_PLB0_BEAR DCRN_PLB0_BEARL /* 40x compatibility */
#define DCRN_PLB0_BEARH 0x087 /* PLB Error Address High */
/* 440GP Clock, PM, chip control */
#define DCRN_CPC0_SR 0x0b0
#define DCRN_CPC0_ER 0x0b1
#define DCRN_CPC0_FR 0x0b2
#define DCRN_CPC0_SYS0 0x0e0
#define DCRN_CPC0_SYS1 0x0e1
#define DCRN_CPC0_CUST0 0x0e2
#define DCRN_CPC0_CUST1 0x0e3
#define DCRN_CPC0_STRP0 0x0e4
#define DCRN_CPC0_STRP1 0x0e5
#define DCRN_CPC0_STRP2 0x0e6
#define DCRN_CPC0_STRP3 0x0e7
#define DCRN_CPC0_GPIO 0x0e8
#define DCRN_CPC0_PLB 0x0e9
#define DCRN_CPC0_CR1 0x0ea
#define DCRN_CPC0_CR0 0x0eb
#define DCRN_CPC0_MIRQ0 0x0ec
#define DCRN_CPC0_MIRQ1 0x0ed
#define DCRN_CPC0_JTAGID 0x0ef
/* 440GP DMA controller DCRs */
#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */
#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */
#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */
#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */
#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */
#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */
#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */
#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */
#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control 1 */
#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count 1 */
#define DCRN_DMASAH1 (DCRN_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */
#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */
#define DCRN_DMADAH1 (DCRN_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */
#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */
#define DCRN_ASGH1 (DCRN_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */
#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */
#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control 2 */
#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count 2 */
#define DCRN_DMASAH2 (DCRN_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */
#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */
#define DCRN_DMADAH2 (DCRN_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */
#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */
#define DCRN_ASGH2 (DCRN_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */
#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */
#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control 3 */
#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count 3 */
#define DCRN_DMASAH3 (DCRN_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */
#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */
#define DCRN_DMADAH3 (DCRN_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */
#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */
#define DCRN_ASGH3 (DCRN_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */
#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */
#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
/* 440GP DRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
#define DCRN_SDRAM0_CFGDATA 0x011
#define SDRAM0_B0CR 0x40
#define SDRAM0_B1CR 0x44
#define SDRAM0_B2CR 0x48
#define SDRAM0_B3CR 0x4c
#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
#define SDRAM_CONFIG_BANK_SIZE(reg) ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)
#define SDRAM_CONFIG_SIZE_8M 0x00000001
#define SDRAM_CONFIG_SIZE_16M 0x00000002
#define SDRAM_CONFIG_SIZE_32M 0x00000003
#define SDRAM_CONFIG_SIZE_64M 0x00000004
#define SDRAM_CONFIG_SIZE_128M 0x00000005
#define SDRAM_CONFIG_SIZE_256M 0x00000006
#define SDRAM_CONFIG_SIZE_512M 0x00000007
#define PPC44x_MEM_SIZE_8M 0x00800000
#define PPC44x_MEM_SIZE_16M 0x01000000
#define PPC44x_MEM_SIZE_32M 0x02000000
#define PPC44x_MEM_SIZE_64M 0x04000000
#define PPC44x_MEM_SIZE_128M 0x08000000
#define PPC44x_MEM_SIZE_256M 0x10000000
#define PPC44x_MEM_SIZE_512M 0x20000000
/*
* PCI-X definitions
*/
#define PCIX0_REG_BASE 0x20ec80000ULL
#define PCIX0_REG_SIZE 0x200
#define PCIX0_VENDID 0x000
#define PCIX0_DEVID 0x002
#define PCIX0_COMMAND 0x004
#define PCIX0_STATUS 0x006
#define PCIX0_REVID 0x008
#define PCIX0_CLS 0x009
#define PCIX0_CACHELS 0x00c
#define PCIX0_LATTIM 0x00d
#define PCIX0_HDTYPE 0x00e
#define PCIX0_BIST 0x00f
#define PCIX0_BAR0L 0x010
#define PCIX0_BAR0H 0x014
#define PCIX0_BAR1 0x018
#define PCIX0_BAR2L 0x01c
#define PCIX0_BAR2H 0x020
#define PCIX0_BAR3 0x024
#define PCIX0_CISPTR 0x028
#define PCIX0_SBSYSVID 0x02c
#define PCIX0_SBSYSID 0x02e
#define PCIX0_EROMBA 0x030
#define PCIX0_CAP 0x034
#define PCIX0_RES0 0x035
#define PCIX0_RES1 0x036
#define PCIX0_RES2 0x038
#define PCIX0_INTLN 0x03c
#define PCIX0_INTPN 0x03d
#define PCIX0_MINGNT 0x03e
#define PCIX0_MAXLTNCY 0x03f
#define PCIX0_BRDGOPT1 0x040
#define PCIX0_BRDGOPT2 0x044
#define PCIX0_ERREN 0x050
#define PCIX0_ERRSTS 0x054
#define PCIX0_PLBBESR 0x058
#define PCIX0_PLBBEARL 0x05c
#define PCIX0_PLBBEARH 0x060
#define PCIX0_POM0LAL 0x068
#define PCIX0_POM0LAH 0x06c
#define PCIX0_POM0SA 0x070
#define PCIX0_POM0PCIAL 0x074
#define PCIX0_POM0PCIAH 0x078
#define PCIX0_POM1LAL 0x07c
#define PCIX0_POM1LAH 0x080
#define PCIX0_POM1SA 0x084
#define PCIX0_POM1PCIAL 0x088
#define PCIX0_POM1PCIAH 0x08c
#define PCIX0_POM2SA 0x090
#define PCIX0_PIM0SAL 0x098
#define PCIX0_PIM0SA PCIX0_PIM0SAL
#define PCIX0_PIM0LAL 0x09c
#define PCIX0_PIM0LAH 0x0a0
#define PCIX0_PIM1SA 0x0a4
#define PCIX0_PIM1LAL 0x0a8
#define PCIX0_PIM1LAH 0x0ac
#define PCIX0_PIM2SAL 0x0b0
#define PCIX0_PIM2SA PCIX0_PIM2SAL
#define PCIX0_PIM2LAL 0x0b4
#define PCIX0_PIM2LAH 0x0b8
#define PCIX0_OMCAPID 0x0c0
#define PCIX0_OMNIPTR 0x0c1
#define PCIX0_OMMC 0x0c2
#define PCIX0_OMMA 0x0c4
#define PCIX0_OMMUA 0x0c8
#define PCIX0_OMMDATA 0x0cc
#define PCIX0_OMMEOI 0x0ce
#define PCIX0_PMCAPID 0x0d0
#define PCIX0_PMNIPTR 0x0d1
#define PCIX0_PMC 0x0d2
#define PCIX0_PMCSR 0x0d4
#define PCIX0_PMCSRBSE 0x0d6
#define PCIX0_PMDATA 0x0d7
#define PCIX0_PMSCRR 0x0d8
#define PCIX0_CAPID 0x0dc
#define PCIX0_NIPTR 0x0dd
#define PCIX0_CMD 0x0de
#define PCIX0_STS 0x0e0
#define PCIX0_IDR 0x0e4
#define PCIX0_CID 0x0e8
#define PCIX0_RID 0x0ec
#define PCIX0_PIM0SAH 0x0f8
#define PCIX0_PIM2SAH 0x0fc
#define PCIX0_MSGIL 0x100
#define PCIX0_MSGIH 0x104
#define PCIX0_MSGOL 0x108
#define PCIX0_MSGOH 0x10c
#define PCIX0_IM 0x1f8
#define IIC_OWN 0x55
#define IIC_CLOCK 50
#undef NR_UICS
#define NR_UICS 2
#define UIC_CASCADE_MASK 0x0003 /* bits 30 & 31 */
#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
#include <asm/ibm4xx.h>
#endif /* __ASSEMBLY__ */
#endif /* __ASM_IBM44x_H__ */
#endif /* __KERNEL__ */
include/asm-ppc/ibm4xx.h
View file @ ac86c82c
...@@ -122,7 +122,25 @@ void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, ...@@ -122,7 +122,25 @@ void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
#define PCI_DRAM_OFFSET 0 #define PCI_DRAM_OFFSET 0
#endif #endif
#elif CONFIG_44x
#if defined(CONFIG_EBONY)
#include <platforms/4xx/ebony.h>
#endif
#if defined(CONFIG_OCOTEA)
#include <platforms/4xx/ocotea.h>
#endif
#endif /* CONFIG_40x */ #endif /* CONFIG_40x */
#ifndef __ASSEMBLY__
/*
* The "residual" board information structure the boot loader passes
* into the kernel.
*/
extern bd_t __res;
#endif
#endif /* __ASM_IBM4XX_H__ */ #endif /* __ASM_IBM4XX_H__ */
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
include/asm-ppc/io.h
View file @ ac86c82c
...@@ -4,9 +4,11 @@ ...@@ -4,9 +4,11 @@
#include <linux/config.h> #include <linux/config.h>
#include <linux/types.h> #include <linux/types.h>
#include <linux/mm.h>
#include <asm/page.h> #include <asm/page.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include <asm/mmu.h>
#define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RA 0x398
#define SIO_CONFIG_RD 0x399 #define SIO_CONFIG_RD 0x399
...@@ -22,7 +24,7 @@ ...@@ -22,7 +24,7 @@
#define PREP_ISA_MEM_BASE 0xc0000000 #define PREP_ISA_MEM_BASE 0xc0000000
#define PREP_PCI_DRAM_OFFSET 0x80000000 #define PREP_PCI_DRAM_OFFSET 0x80000000
#if defined(CONFIG_40x) #if defined(CONFIG_4xx)
#include <asm/ibm4xx.h> #include <asm/ibm4xx.h>
#elif defined(CONFIG_8xx) #elif defined(CONFIG_8xx)
#include <asm/mpc8xx.h> #include <asm/mpc8xx.h>
...@@ -197,14 +199,17 @@ extern void _outsl_ns(volatile u32 *port, const void *buf, int nl); ...@@ -197,14 +199,17 @@ extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
* Map in an area of physical address space, for accessing * Map in an area of physical address space, for accessing
* I/O devices etc. * I/O devices etc.
*/ */
extern void *__ioremap(unsigned long address, unsigned long size, extern void *__ioremap(phys_addr_t address, unsigned long size,
unsigned long flags); unsigned long flags);
extern void *ioremap(unsigned long address, unsigned long size); extern void *ioremap(phys_addr_t address, unsigned long size);
#ifdef CONFIG_44x
extern void *ioremap64(unsigned long long address, unsigned long size);
#endif
#define ioremap_nocache(addr, size) ioremap((addr), (size)) #define ioremap_nocache(addr, size) ioremap((addr), (size))
extern void iounmap(void *addr); extern void iounmap(void *addr);
extern unsigned long iopa(unsigned long addr); extern unsigned long iopa(unsigned long addr);
extern unsigned long mm_ptov(unsigned long addr) __attribute__ ((const)); extern unsigned long mm_ptov(unsigned long addr) __attribute__ ((const));
extern void io_block_mapping(unsigned long virt, unsigned long phys, extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
unsigned int size, int flags); unsigned int size, int flags);
/* /*
......
include/asm-ppc/irq.h
View file @ ac86c82c
...@@ -71,11 +71,11 @@ irq_canonicalize(int irq) ...@@ -71,11 +71,11 @@ irq_canonicalize(int irq)
return (irq); return (irq);
} }
#elif defined(CONFIG_440) #elif defined(CONFIG_44x)
#include <asm/ibm440.h> #include <asm/ibm44x.h>
#define NR_UIC_IRQS 64 #define NR_UIC_IRQS 32
#define NR_IRQS (NR_UIC_IRQS + NR_BOARD_IRQS) #define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
static __inline__ int static __inline__ int
irq_canonicalize(int irq) irq_canonicalize(int irq)
......
include/asm-ppc/mmu.h
View file @ ac86c82c
...@@ -10,6 +10,18 @@ ...@@ -10,6 +10,18 @@
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
/*
* Define physical address type. Machines using split size
* virtual/physical addressing like 32-bit virtual / 36-bit
* physical need a larger than native word size type. -Matt
*/
#ifndef CONFIG_PTE_64BIT
typedef unsigned long phys_addr_t;
#else
typedef unsigned long long phys_addr_t;
extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
#endif
/* Default "unsigned long" context */ /* Default "unsigned long" context */
typedef unsigned long mm_context_t; typedef unsigned long mm_context_t;
...@@ -320,5 +332,55 @@ typedef struct _P601_BAT { ...@@ -320,5 +332,55 @@ typedef struct _P601_BAT {
#define TLB_M 0x00000002 /* Memory is coherent */ #define TLB_M 0x00000002 /* Memory is coherent */
#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ #define TLB_G 0x00000001 /* Memory is guarded from prefetch */
/*
* PPC440 support
*/
#define PPC44x_MMUCR_TID 0x000000ff
#define PPC44x_MMUCR_STS 0x00010000
#define PPC44x_TLB_PAGEID 0
#define PPC44x_TLB_XLAT 1
#define PPC44x_TLB_ATTRIB 2
/* Page identification fields */
#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */
#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */
#define PPC44x_TLB_TS 0x00000100 /* Translation address space */
#define PPC44x_TLB_PAGESZ_MASK 0x000000f0
#define PPC44x_TLB_PAGESZ(x) (x << 4)
#define PPC44x_PAGESZ_1K 0
#define PPC44x_PAGESZ_4K 1
#define PPC44x_PAGESZ_16K 2
#define PPC44x_PAGESZ_64K 3
#define PPC44x_PAGESZ_256K 4
#define PPC44x_PAGESZ_1M 5
#define PPC44x_PAGESZ_16M 7
#define PPC44x_PAGESZ_256M 9
/* Translation fields */
#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */
#define PPC44x_TLB_ERPN_MASK 0x0000000f
/* Storage attribute and access control fields */
#define PPC44x_TLB_ATTR_MASK 0x0000ff80
#define PPC44x_TLB_U0 0x00008000 /* User 0 */
#define PPC44x_TLB_U1 0x00004000 /* User 1 */
#define PPC44x_TLB_U2 0x00002000 /* User 2 */
#define PPC44x_TLB_U3 0x00001000 /* User 3 */
#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */
#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
#define PPC44x_TLB_PERM_MASK 0x0000003f
#define PPC44x_TLB_UX 0x00000020 /* User execution */
#define PPC44x_TLB_UW 0x00000010 /* User write */
#define PPC44x_TLB_UR 0x00000008 /* User read */
#define PPC44x_TLB_SX 0x00000004 /* Super execution */
#define PPC44x_TLB_SW 0x00000002 /* Super write */
#define PPC44x_TLB_SR 0x00000001 /* Super read */
#endif /* _PPC_MMU_H_ */ #endif /* _PPC_MMU_H_ */
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
include/asm-ppc/page.h
View file @ ac86c82c
...@@ -4,7 +4,12 @@ ...@@ -4,7 +4,12 @@
/* PAGE_SHIFT determines the page size */ /* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12 #define PAGE_SHIFT 12
#define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
/*
* Subtle: this is an int (not an unsigned long) and so it
* gets extended to 64 bits the way want (i.e. with 1s). -- paulus
*/
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
#ifdef __KERNEL__ #ifdef __KERNEL__
#include <linux/config.h> #include <linux/config.h>
...@@ -15,13 +20,27 @@ ...@@ -15,13 +20,27 @@
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#define STRICT_MM_TYPECHECKS /*
* The basic type of a PTE - 64 bits for those CPUs with > 32 bit
* physical addressing. For now this just the IBM PPC440.
*/
#ifdef CONFIG_PTE_64BIT
typedef unsigned long long pte_basic_t;
#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
#define PTE_FMT "%16Lx"
#else
typedef unsigned long pte_basic_t;
#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
#define PTE_FMT "%.8lx"
#endif
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS
/* /*
* These are used to make use of C type-checking.. * These are used to make use of C type-checking..
*/ */
typedef struct { unsigned long pte; } pte_t; typedef struct { pte_basic_t pte; } pte_t;
typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pmd; } pmd_t;
typedef struct { unsigned long pgd; } pgd_t; typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t; typedef struct { unsigned long pgprot; } pgprot_t;
...@@ -40,7 +59,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; ...@@ -40,7 +59,7 @@ typedef struct { unsigned long pgprot; } pgprot_t;
/* /*
* .. while these make it easier on the compiler * .. while these make it easier on the compiler
*/ */
typedef unsigned long pte_t; typedef pte_basic_t pte_t;
typedef unsigned long pmd_t; typedef unsigned long pmd_t;
typedef unsigned long pgd_t; typedef unsigned long pgd_t;
typedef unsigned long pgprot_t; typedef unsigned long pgprot_t;
...@@ -123,6 +142,7 @@ static inline void* ___va(unsigned long p) ...@@ -123,6 +142,7 @@ static inline void* ___va(unsigned long p)
#define pfn_to_page(pfn) (mem_map + ((pfn) - PPC_PGSTART)) #define pfn_to_page(pfn) (mem_map + ((pfn) - PPC_PGSTART))
#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + PPC_PGSTART) #define page_to_pfn(page) ((unsigned long)((page) - mem_map) + PPC_PGSTART)
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr) #define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
......
include/asm-ppc/pgalloc.h
View file @ ac86c82c
...@@ -20,10 +20,17 @@ extern void pgd_free(pgd_t *pgd); ...@@ -20,10 +20,17 @@ extern void pgd_free(pgd_t *pgd);
#define __pmd_free_tlb(tlb,x) do { } while (0) #define __pmd_free_tlb(tlb,x) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG() #define pgd_populate(mm, pmd, pte) BUG()
#ifndef CONFIG_BOOKE
#define pmd_populate_kernel(mm, pmd, pte) \ #define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \ #define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
#else
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
#endif
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr); extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
......
include/asm-ppc/pgtable.h
View file @ ac86c82c
...@@ -65,13 +65,23 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -65,13 +65,23 @@ extern unsigned long ioremap_bot, ioremap_base;
* and ITLB, respectively (see "mmu.h" for definitions). * and ITLB, respectively (see "mmu.h" for definitions).
*/ */
/* PMD_SHIFT determines the size of the area mapped by the second-level page tables */ /*
#define PMD_SHIFT 22 * The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
* For any >32-bit physical address platform, we can use the following
* two level page table layout where the pgdir is 8KB and the MS 13 bits
* are an index to the second level table. The combined pgdir/pmd first
* level has 2048 entries and the second level has 512 64-bit PTE entries.
* -Matt
*/
/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
#define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1)) #define PMD_MASK (~(PMD_SIZE-1))
/* PGDIR_SHIFT determines what a third-level page table entry can map */ /* PGDIR_SHIFT determines what a top-level page table entry can map */
#define PGDIR_SHIFT 22 #define PGDIR_SHIFT PMD_SHIFT
#define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1)) #define PGDIR_MASK (~(PGDIR_SIZE-1))
...@@ -79,9 +89,10 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -79,9 +89,10 @@ extern unsigned long ioremap_bot, ioremap_base;
* entries per page directory level: our page-table tree is two-level, so * entries per page directory level: our page-table tree is two-level, so
* we don't really have any PMD directory. * we don't really have any PMD directory.
*/ */
#define PTRS_PER_PTE 1024 #define PTRS_PER_PTE (1 << PTE_SHIFT)
#define PTRS_PER_PMD 1 #define PTRS_PER_PMD 1
#define PTRS_PER_PGD 1024 #define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_PGD_NR 0 #define FIRST_USER_PGD_NR 0
...@@ -89,7 +100,7 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -89,7 +100,7 @@ extern unsigned long ioremap_bot, ioremap_base;
#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) #define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
#define pte_ERROR(e) \ #define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e))
#define pmd_ERROR(e) \ #define pmd_ERROR(e) \
printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \ #define pgd_ERROR(e) \
...@@ -113,7 +124,11 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -113,7 +124,11 @@ extern unsigned long ioremap_bot, ioremap_base;
* of RAM. -- Cort * of RAM. -- Cort
*/ */
#define VMALLOC_OFFSET (0x1000000) /* 16M */ #define VMALLOC_OFFSET (0x1000000) /* 16M */
#ifdef CONFIG_44x
#define VMALLOC_START (((_ALIGN((long)high_memory, PPC44x_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
#define VMALLOC_VMADDR(x) ((unsigned long)(x)) #define VMALLOC_VMADDR(x) ((unsigned long)(x))
#define VMALLOC_END ioremap_bot #define VMALLOC_END ioremap_bot
...@@ -170,6 +185,44 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -170,6 +185,44 @@ extern unsigned long ioremap_bot, ioremap_base;
#define _PMD_SIZE_16M 0x0e0 #define _PMD_SIZE_16M 0x0e0
#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) #define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
#elif defined(CONFIG_44x)
/*
* Definitions for PPC440
*
* Because of the 3 word TLB entries to support 36-bit addressing,
* the attribute are difficult to map in such a fashion that they
* are easily loaded during exception processing. I decided to
* organize the entry so the ERPN is the only portion in the
* upper word of the PTE and the attribute bits below are packed
* in as sensibly as they can be in the area below a 4KB page size
* oriented RPN. This at least makes it easy to load the RPN and
* ERPN fields in the TLB. -Matt
*
* Note that these bits preclude future use of a page size
* less than 4KB.
*/
#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
#define _PAGE_RW 0x00000002 /* S: Write permission */
#define _PAGE_DIRTY 0x00000004 /* S: Page dirty */
#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
#define _PAGE_USER 0x00000040 /* S: User page */
#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
#define _PAGE_GUARDED 0x00000100 /* H: G bit */
#define _PAGE_COHERENT 0x00000200 /* H: M bit */
#define _PAGE_FILE 0x00000400 /* S: nonlinear file mapping */
#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
/* TODO: Add large page lowmem mapping support */
#define _PMD_PRESENT 0
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
/* ERPN in a PTE never gets cleared, ignore it */
#define _PTE_NONE_MASK 0xffffffff00000000ULL
#elif defined(CONFIG_8xx) #elif defined(CONFIG_8xx)
/* Definitions for 8xx embedded chips. */ /* Definitions for 8xx embedded chips. */
#define _PAGE_PRESENT 0x0001 /* Page is valid */ #define _PAGE_PRESENT 0x0001 /* Page is valid */
...@@ -270,7 +323,11 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -270,7 +323,11 @@ extern unsigned long ioremap_bot, ioremap_base;
#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) #define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
#ifndef CONFIG_44x
#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) #define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
#else
#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE | _PAGE_GUARDED)
#endif
#ifdef CONFIG_PPC_STD_MMU #ifdef CONFIG_PPC_STD_MMU
/* On standard PPC MMU, no user access implies kernel read/write access, /* On standard PPC MMU, no user access implies kernel read/write access,
...@@ -283,7 +340,7 @@ extern unsigned long ioremap_bot, ioremap_base; ...@@ -283,7 +340,7 @@ extern unsigned long ioremap_bot, ioremap_base;
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) #define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) #define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
/* We want the debuggers to be able to set breakpoints anywhere, so /* We want the debuggers to be able to set breakpoints anywhere, so
* don't write protect the kernel text */ * don't write protect the kernel text */
#define _PAGE_RAM_TEXT _PAGE_RAM #define _PAGE_RAM_TEXT _PAGE_RAM
...@@ -420,6 +477,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) ...@@ -420,6 +477,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
* *
* pte_update clears and sets bit atomically, and returns * pte_update clears and sets bit atomically, and returns
* the old pte value. * the old pte value.
* The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
* 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
*/ */
static inline unsigned long pte_update(pte_t *p, unsigned long clr, static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set) unsigned long set)
...@@ -434,7 +493,7 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr, ...@@ -434,7 +493,7 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr,
" stwcx. %1,0,%3\n\ " stwcx. %1,0,%3\n\
bne- 1b" bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p) : "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p) : "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
: "cc" ); : "cc" );
return old; return old;
} }
...@@ -485,11 +544,25 @@ static inline void ptep_mkdirty(pte_t *ptep) ...@@ -485,11 +544,25 @@ static inline void ptep_mkdirty(pte_t *ptep)
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
/*
* Note that on Book E processors, the pmd contains the kernel virtual
* (lowmem) address of the pte page. The physical address is less useful
* because everything runs with translation enabled (even the TLB miss
* handler). On everything else the pmd contains the physical address
* of the pte page. -- paulus
*/
#ifndef CONFIG_BOOKE
#define pmd_page_kernel(pmd) \ #define pmd_page_kernel(pmd) \
((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
#define pmd_page(pmd) \ #define pmd_page(pmd) \
(mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
#else
#define pmd_page_kernel(pmd) \
((unsigned long) (pmd_val(pmd) & PAGE_MASK))
#define pmd_page(pmd) \
(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
#endif
/* to find an entry in a kernel page-table-directory */ /* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address) #define pgd_offset_k(address) pgd_offset(&init_mm, address)
...@@ -516,7 +589,8 @@ static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) ...@@ -516,7 +589,8 @@ static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) #define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) #define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
extern pgd_t swapper_pg_dir[1024]; extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init(void); extern void paging_init(void);
/* /*
......
include/asm-ppc/ppc_asm.h
View file @ ac86c82c
...@@ -107,7 +107,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) ...@@ -107,7 +107,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
bdnz 0b bdnz 0b
#endif #endif
#if !defined(CONFIG_440) #if !defined(CONFIG_44x)
/* /*
* On APUS (Amiga PowerPC cpu upgrade board), we don't know the * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
* physical base address of RAM at compile time. * physical base address of RAM at compile time.
...@@ -125,7 +125,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) ...@@ -125,7 +125,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
.align 1; \ .align 1; \
.long 0b; \ .long 0b; \
.previous .previous
#else /* CONFIG_440 */ #else /* CONFIG_44x */
#define tophys(rd,rs) \ #define tophys(rd,rs) \
mr rd,rs mr rd,rs
...@@ -133,7 +133,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) ...@@ -133,7 +133,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define tovirt(rd,rs) \ #define tovirt(rd,rs) \
mr rd,rs mr rd,rs
#endif /* CONFIG_440 */ #endif /* CONFIG_44x */
/* /*
* On 64-bit cpus, we use the rfid instruction instead of rfi, but * On 64-bit cpus, we use the rfid instruction instead of rfi, but
......
include/asm-ppc/processor.h
View file @ ac86c82c
...@@ -2,6 +2,12 @@ ...@@ -2,6 +2,12 @@
#ifndef __ASM_PPC_PROCESSOR_H #ifndef __ASM_PPC_PROCESSOR_H
#define __ASM_PPC_PROCESSOR_H #define __ASM_PPC_PROCESSOR_H
/*
* The Book E definitions are hacked into here for 440 right
* now. This whole thing needs regorganized (maybe two files)
* so that it becomes readable. -Matt
*/
/* /*
* Default implementation of macro that returns current * Default implementation of macro that returns current
* instruction pointer ("program counter"). * instruction pointer ("program counter").
...@@ -45,6 +51,11 @@ ...@@ -45,6 +51,11 @@
#define MSR_RI (1<<1) /* Recoverable Exception */ #define MSR_RI (1<<1) /* Recoverable Exception */
#define MSR_LE (1<<0) /* Little Endian */ #define MSR_LE (1<<0) /* Little Endian */
#ifdef CONFIG_BOOKE
#define MSR_IS MSR_IR /* Instruction Space */
#define MSR_DS MSR_DR /* Data Space */
#endif
#ifdef CONFIG_APUS_FAST_EXCEPT #ifdef CONFIG_APUS_FAST_EXCEPT
#define MSR_ (MSR_ME|MSR_IP|MSR_RI) #define MSR_ (MSR_ME|MSR_IP|MSR_RI)
#else #else
...@@ -93,8 +104,13 @@ ...@@ -93,8 +104,13 @@
#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ #define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */ #define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#ifndef CONFIG_BOOKE
#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ #define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ #define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
#else
#define SPRN_DAC1 0x13C /* Book E Data Address Compare 1 */
#define SPRN_DAC2 0x13D /* Book E Data Address Compare 2 */
#endif /* CONFIG_BOOKE */
#define SPRN_DAR 0x013 /* Data Address Register */ #define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ #define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ #define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
...@@ -146,7 +162,11 @@ ...@@ -146,7 +162,11 @@
#define DBCR_SDA 0x00000004 /* Second DAC Enable */ #define DBCR_SDA 0x00000004 /* Second DAC Enable */
#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ #define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ #define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
#ifndef CONFIG_BOOKE
#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ #define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
#else
#define SPRN_DBCR0 0x134 /* Book E Debug Control Register 0 */
#endif /* CONFIG_BOOKE */
#define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */
...@@ -169,11 +189,18 @@ ...@@ -169,11 +189,18 @@
#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
#ifndef CONFIG_BOOKE
#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ #define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
#define SPRN_DBSR 0x3F0 /* Debug Status Register */ #define SPRN_DBSR 0x3F0 /* Debug Status Register */
#define DBSR_IC 0x80000000 /* Instruction Completion */ #define DBSR_IC 0x80000000 /* Instruction Completion */
#define DBSR_BT 0x40000000 /* Branch taken */ #define DBSR_BT 0x40000000 /* Branch taken */
#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ #define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
#else
#define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */
#define SPRN_DBSR 0x130 /* Book E Debug Status Register */
#define DBSR_IC 0x08000000 /* Book E Instruction Completion */
#define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */
#endif /* CONFIG_BOOKE */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define DCCR_NOCACHE 0 /* Noncacheable */ #define DCCR_NOCACHE 0 /* Noncacheable */
#define DCCR_CACHE 1 /* Cacheable */ #define DCCR_CACHE 1 /* Cacheable */
...@@ -181,7 +208,11 @@ ...@@ -181,7 +208,11 @@
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ #define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
#define DCWR_COPY 0 /* Copy-back */ #define DCWR_COPY 0 /* Copy-back */
#define DCWR_WRITE 1 /* Write-through */ #define DCWR_WRITE 1 /* Write-through */
#ifndef CONFIG_BOOKE
#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ #define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#else
#define SPRN_DEAR 0x03D /* Book E Data Error Address Register */
#endif /* CONFIG_BOOKE */
#define SPRN_DEC 0x016 /* Decrement Register */ #define SPRN_DEC 0x016 /* Decrement Register */
#define SPRN_DER 0x095 /* Debug Enable Regsiter */ #define SPRN_DER 0x095 /* Debug Enable Regsiter */
#define DER_RSTE 0x40000000 /* Reset Interrupt */ #define DER_RSTE 0x40000000 /* Reset Interrupt */
...@@ -206,12 +237,16 @@ ...@@ -206,12 +237,16 @@
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ #define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define SPRN_EAR 0x11A /* External Address Register */ #define SPRN_EAR 0x11A /* External Address Register */
#ifndef CONFIG_BOOKE
#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ #define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
#else
#define SPRN_ESR 0x03E /* Book E Exception Syndrome Register */
#endif /* CONFIG_BOOKE */
#define ESR_MCI 0x80000000 /* 405 Machine Check - Instruction */ #define ESR_MCI 0x80000000 /* 405 Machine Check - Instruction */
#define ESR_IMCP 0x80000000 /* 403 Inst. Mach. Check - Protection */ #define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
#define ESR_IMCN 0x40000000 /* 403 Inst. Mach. Check - Non-config */ #define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
#define ESR_IMCB 0x20000000 /* 403 Inst. Mach. Check - Bus error */ #define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* 403 Inst. Mach. Check - Timeout */ #define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ #define ESR_PIL 0x08000000 /* Program Exception - Illegal */
#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */ #define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */ #define ESR_PTR 0x02000000 /* Program Exception - Trap */
...@@ -266,8 +301,13 @@ ...@@ -266,8 +301,13 @@
#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ #define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ #define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#ifndef CONFIG_BOOKE
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ #define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ #define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
#else
#define SPRN_IAC1 0x138 /* Book E Instruction Address Compare 1 */
#define SPRN_IAC2 0x139 /* Book E Instruction Address Compare 2 */
#endif /* CONFIG_BOOKE */
#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ #define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ #define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ #define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
...@@ -358,8 +398,13 @@ ...@@ -358,8 +398,13 @@
#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ #define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ #define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ #define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
#ifndef CONFIG_BOOKE
#define SPRN_PID 0x3B1 /* Process ID */ #define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_PIR 0x3FF /* Processor Identification Register */ #define SPRN_PIR 0x3FF /* Processor Identification Register */
#else
#define SPRN_PID 0x030 /* Book E Process ID */
#define SPRN_PIR 0x11E /* Book E Processor Identification Register */
#endif /* CONFIG_BOOKE */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */ #define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */ #define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
...@@ -375,6 +420,7 @@ ...@@ -375,6 +420,7 @@
#define SGR_NORMAL 0 #define SGR_NORMAL 0
#define SGR_GUARDED 1 #define SGR_GUARDED 1
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ #define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SLER 0x3BB /* Little-endian real mode */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ #define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ #define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
...@@ -387,6 +433,7 @@ ...@@ -387,6 +433,7 @@
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ #define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ #define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
#define SPRN_SU0R 0x3BC /* "User 0" real mode */
#define SPRN_TBHI 0x3DC /* Time Base High (4xx) */ #define SPRN_TBHI 0x3DC /* Time Base High (4xx) */
#define SPRN_TBHU 0x3CC /* Time Base High User-mode (4xx) */ #define SPRN_TBHU 0x3CC /* Time Base High User-mode (4xx) */
#define SPRN_TBLO 0x3DD /* Time Base Low (4xx) */ #define SPRN_TBLO 0x3DD /* Time Base Low (4xx) */
...@@ -395,7 +442,11 @@ ...@@ -395,7 +442,11 @@
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ #define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ #define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ #define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
#ifndef CONFIG_BOOKE
#define SPRN_TCR 0x3DA /* Timer Control Register */ #define SPRN_TCR 0x3DA /* Timer Control Register */
#else
#define SPRN_TCR 0x154 /* Book E Timer Control Register */
#endif
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
#define TCR_WP_MASK TCR_WP(3) #define TCR_WP_MASK TCR_WP(3)
#define WP_2_17 0 /* 2^17 clocks */ #define WP_2_17 0 /* 2^17 clocks */
...@@ -410,6 +461,7 @@ ...@@ -410,6 +461,7 @@
#define WRC_SYSTEM 3 /* System reset will occur */ #define WRC_SYSTEM 3 /* System reset will occur */
#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ #define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ #define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ #define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
#define TCR_FP_MASK TCR_FP(3) #define TCR_FP_MASK TCR_FP(3)
#define FP_2_9 0 /* 2^9 clocks */ #define FP_2_9 0 /* 2^9 clocks */
...@@ -431,7 +483,11 @@ ...@@ -431,7 +483,11 @@
#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ #define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
#define THRM3_E (1<<0) #define THRM3_E (1<<0)
#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ #define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
#ifndef CONFIG_BOOKE
#define SPRN_TSR 0x3D8 /* Timer Status Register */ #define SPRN_TSR 0x3D8 /* Timer Status Register */
#else
#define SPRN_TSR 0x150 /* Book E Timer Status Register */
#endif /* CONFIG_BOOKE */
#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ #define TSR_ENW 0x80000000 /* Enable Next Watchdog */
#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ #define TSR_WIS 0x40000000 /* WDT Interrupt Status */
#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ #define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
...@@ -440,6 +496,7 @@ ...@@ -440,6 +496,7 @@
#define WRS_CHIP 2 /* WDT forced chip reset */ #define WRS_CHIP 2 /* WDT forced chip reset */
#define WRS_SYSTEM 3 /* WDT forced system reset */ #define WRS_SYSTEM 3 /* WDT forced system reset */
#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ #define TSR_PIS 0x08000000 /* PIT Interrupt Status */
#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ #define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ #define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ #define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
...@@ -452,6 +509,45 @@ ...@@ -452,6 +509,45 @@
#define SPRN_XER 0x001 /* Fixed Point Exception Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */
#define SPRN_ZPR 0x3B0 /* Zone Protection Register */ #define SPRN_ZPR 0x3B0 /* Zone Protection Register */
/* Book E definitions */
#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
#define SPRN_DVC1 0x13E /* */
#define SPRN_DVC2 0x13F /* */
#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
#define SPRN_IVOR10 0x19a /* Interrupt Vector Offset Register 10 */
#define SPRN_IVOR11 0x19b /* Interrupt Vector Offset Register 11 */
#define SPRN_IVOR12 0x19c /* Interrupt Vector Offset Register 12 */
#define SPRN_IVOR13 0x19d /* Interrupt Vector Offset Register 13 */
#define SPRN_IVOR14 0x19e /* Interrupt Vector Offset Register 14 */
#define SPRN_IVOR15 0x19f /* Interrupt Vector Offset Register 15 */
#define SPRN_MMUCR 0x3b2 /* MMU Control Register */
#define ESR_ST 0x00800000 /* Store Operation */
/* Short-hand versions for a number of the above SPRNs */ /* Short-hand versions for a number of the above SPRNs */
#define CTR SPRN_CTR /* Counter Register */ #define CTR SPRN_CTR /* Counter Register */
...@@ -524,6 +620,16 @@ ...@@ -524,6 +620,16 @@
#define SPRG5 SPRN_SPRG5 #define SPRG5 SPRN_SPRG5
#define SPRG6 SPRN_SPRG6 #define SPRG6 SPRN_SPRG6
#define SPRG7 SPRN_SPRG7 #define SPRG7 SPRN_SPRG7
#define SPRG4R SPRN_SPRG4R /* Book E Supervisor Private Registers */
#define SPRG5R SPRN_SPRG5R
#define SPRG6R SPRN_SPRG6R
#define SPRG7R SPRN_SPRG7R
#define SPRG4W SPRN_SPRG4W
#define SPRG5W SPRN_SPRG5W
#define SPRG6W SPRN_SPRG6W
#define SPRG7W SPRN_SPRG7W
#define CSRR0 SPRN_CSRR0 /* Critical Save and Restore Register 0 */
#define CSRR1 SPRN_CSRR1 /* Critical Save and Restore Register 1 */
#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */ #define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */ #define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
#define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */ #define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */
...@@ -557,6 +663,51 @@ ...@@ -557,6 +663,51 @@
#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ #define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ #define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
/* Processor Version Numbers */
#define PVR_403GA 0x00200000
#define PVR_403GB 0x00200100
#define PVR_403GC 0x00200200
#define PVR_403GCX 0x00201400
#define PVR_405GP 0x40110000
#define PVR_STB03XXX 0x40310000
#define PVR_NP405H 0x41410000
#define PVR_NP405L 0x41610000
#define PVR_440GP_RB 0x40120440
#define PVR_440GP_RC1 0x40120481
#define PVR_440GP_RC2 0x40200481
#define PVR_440GX_RC1 0x51b21850
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
#define PVR_603e 0x00060000
#define PVR_603ev 0x00070000
#define PVR_603r 0x00071000
#define PVR_604 0x00040000
#define PVR_604e 0x00090000
#define PVR_604r 0x000A0000
#define PVR_620 0x00140000
#define PVR_740 0x00080000
#define PVR_750 PVR_740
#define PVR_740P 0x10080000
#define PVR_750P PVR_740P
#define PVR_7400 0x000C0000
#define PVR_7410 0x800C0000
#define PVR_7450 0x80000000
/*
* For the 8xx processors, all of them report the same PVR family for
* the PowerPC core. The various versions of these processors must be
* differentiated by the version number in the Communication Processor
* Module (CPM).
*/
#define PVR_821 0x00500000
#define PVR_823 PVR_821
#define PVR_850 PVR_821
#define PVR_860 PVR_821
#define PVR_8240 0x00810100
#define PVR_8245 0x80811014
#define PVR_8260 PVR_8240
/* We only need to define a new _MACH_xxx for machines which are part of /* We only need to define a new _MACH_xxx for machines which are part of
* a configuration which supports more than one type of different machine. * a configuration which supports more than one type of different machine.
* This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac. -- Tom * This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac. -- Tom
......
include/asm-ppc/serial.h
View file @ ac86c82c
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
#include <platforms/sandpoint.h> #include <platforms/sandpoint.h>
#elif defined(CONFIG_SPRUCE) #elif defined(CONFIG_SPRUCE)
#include <platforms/spruce_serial.h> #include <platforms/spruce_serial.h>
#elif defined(CONFIG_40x) #elif defined(CONFIG_4xx)
#include <asm/ibm4xx.h> #include <asm/ibm4xx.h>
#else #else
......
include/asm-ppc/tlbflush.h
View file @ ac86c82c
...@@ -19,17 +19,23 @@ extern void _tlbia(void); ...@@ -19,17 +19,23 @@ extern void _tlbia(void);
#if defined(CONFIG_4xx) #if defined(CONFIG_4xx)
#ifndef CONFIG_44x
#define __tlbia() asm volatile ("sync; tlbia; isync" : : : "memory")
#else
#define __tlbia _tlbia
#endif
static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_mm(struct mm_struct *mm)
{ _tlbia(); } { __tlbia(); }
static inline void flush_tlb_page(struct vm_area_struct *vma, static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr) unsigned long vmaddr)
{ _tlbie(vmaddr); } { _tlbie(vmaddr); }
static inline void flush_tlb_range(struct vm_area_struct *vma, static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end) unsigned long start, unsigned long end)
{ _tlbia(); } { __tlbia(); }
static inline void flush_tlb_kernel_range(unsigned long start, static inline void flush_tlb_kernel_range(unsigned long start,
unsigned long end) unsigned long end)
{ _tlbia(); } { __tlbia(); }
#elif defined(CONFIG_8xx) #elif defined(CONFIG_8xx)
#define __tlbia() asm volatile ("tlbia; sync" : : : "memory") #define __tlbia() asm volatile ("tlbia; sync" : : : "memory")
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7