net: dsa: felix: remove prevalidate_phy_mode interface

All users of the felix driver were creating their own prevalidate_phy_mode
function. The same logic can be performed in a more general way by using a
simple array of bit fields.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/ocelot/felix.c

@@ -938,11 +938,28 @@ static int felix_get_ts_info(struct dsa_switch *ds, int port,
 	return ocelot_get_ts_info(ocelot, port, info);
 }
 
+static const u32 felix_phy_match_table[PHY_INTERFACE_MODE_MAX] = {
+	[PHY_INTERFACE_MODE_INTERNAL] = OCELOT_PORT_MODE_INTERNAL,
+	[PHY_INTERFACE_MODE_SGMII] = OCELOT_PORT_MODE_SGMII,
+	[PHY_INTERFACE_MODE_QSGMII] = OCELOT_PORT_MODE_QSGMII,
+	[PHY_INTERFACE_MODE_USXGMII] = OCELOT_PORT_MODE_USXGMII,
+	[PHY_INTERFACE_MODE_2500BASEX] = OCELOT_PORT_MODE_2500BASEX,
+};
+
+static int felix_validate_phy_mode(struct felix *felix, int port,
+				   phy_interface_t phy_mode)
+{
+	u32 modes = felix->info->port_modes[port];
+
+	if (felix_phy_match_table[phy_mode] & modes)
+		return 0;
+	return -EOPNOTSUPP;
+}
+
 static int felix_parse_ports_node(struct felix *felix,
 				  struct device_node *ports_node,
 				  phy_interface_t *port_phy_modes)
 {
-	struct ocelot *ocelot = &felix->ocelot;
 	struct device *dev = felix->ocelot.dev;
 	struct device_node *child;
 
@@ -969,7 +986,7 @@ static int felix_parse_ports_node(struct felix *felix,
 			return -ENODEV;
 		}
 
-		err = felix->info->prevalidate_phy_mode(ocelot, port, phy_mode);
+		err = felix_validate_phy_mode(felix, port, phy_mode);
 		if (err < 0) {
 			dev_err(dev, "Unsupported PHY mode %s on port %d\n",
 				phy_modes(phy_mode), port);

drivers/net/dsa/ocelot/felix.h

@@ -7,6 +7,12 @@
 #define ocelot_to_felix(o)		container_of((o), struct felix, ocelot)
 #define FELIX_MAC_QUIRKS		OCELOT_QUIRK_PCS_PERFORMS_RATE_ADAPTATION
 
+#define OCELOT_PORT_MODE_INTERNAL	BIT(0)
+#define OCELOT_PORT_MODE_SGMII		BIT(1)
+#define OCELOT_PORT_MODE_QSGMII		BIT(2)
+#define OCELOT_PORT_MODE_2500BASEX	BIT(3)
+#define OCELOT_PORT_MODE_USXGMII	BIT(4)
+
 /* Platform-specific information */
 struct felix_info {
 	const struct resource		*target_io_res;
@@ -15,6 +21,7 @@ struct felix_info {
 	const struct reg_field		*regfields;
 	const u32 *const		*map;
 	const struct ocelot_ops		*ops;
+	const u32			*port_modes;
 	int				num_mact_rows;
 	const struct ocelot_stat_layout	*stats_layout;
 	unsigned int			num_stats;
@@ -44,8 +51,6 @@ struct felix_info {
 	void	(*phylink_validate)(struct ocelot *ocelot, int port,
 				    unsigned long *supported,
 				    struct phylink_link_state *state);
-	int	(*prevalidate_phy_mode)(struct ocelot *ocelot, int port,
-					phy_interface_t phy_mode);
 	int	(*port_setup_tc)(struct dsa_switch *ds, int port,
 				 enum tc_setup_type type, void *type_data);
 	void	(*port_sched_speed_set)(struct ocelot *ocelot, int port,

drivers/net/dsa/ocelot/felix_vsc9959.c

@@ -18,12 +18,27 @@
 #include <linux/pci.h>
 #include "felix.h"
 
+#define VSC9959_NUM_PORTS		6
+
 #define VSC9959_TAS_GCL_ENTRY_MAX	63
 #define VSC9959_VCAP_POLICER_BASE	63
 #define VSC9959_VCAP_POLICER_MAX	383
 #define VSC9959_SWITCH_PCI_BAR		4
 #define VSC9959_IMDIO_PCI_BAR		0
 
+#define VSC9959_PORT_MODE_SERDES	(OCELOT_PORT_MODE_SGMII | \
+					 OCELOT_PORT_MODE_QSGMII | \
+					 OCELOT_PORT_MODE_2500BASEX | \
+					 OCELOT_PORT_MODE_USXGMII)
+
+static const u32 vsc9959_port_modes[VSC9959_NUM_PORTS] = {
+	VSC9959_PORT_MODE_SERDES,
+	VSC9959_PORT_MODE_SERDES,
+	VSC9959_PORT_MODE_SERDES,
+	VSC9959_PORT_MODE_SERDES,
+	OCELOT_PORT_MODE_INTERNAL,
+};
+
 static const u32 vsc9959_ana_regmap[] = {
 	REG(ANA_ADVLEARN,			0x0089a0),
 	REG(ANA_VLANMASK,			0x0089a4),
@@ -968,27 +983,6 @@ static void vsc9959_phylink_validate(struct ocelot *ocelot, int port,
 	linkmode_and(state->advertising, state->advertising, mask);
 }
 
-static int vsc9959_prevalidate_phy_mode(struct ocelot *ocelot, int port,
-					phy_interface_t phy_mode)
-{
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_INTERNAL:
-		if (port != 4 && port != 5)
-			return -ENOTSUPP;
-		return 0;
-	case PHY_INTERFACE_MODE_SGMII:
-	case PHY_INTERFACE_MODE_QSGMII:
-	case PHY_INTERFACE_MODE_USXGMII:
-	case PHY_INTERFACE_MODE_2500BASEX:
-		/* Not supported on internal to-CPU ports */
-		if (port == 4 || port == 5)
-			return -ENOTSUPP;
-		return 0;
-	default:
-		return -ENOTSUPP;
-	}
-}
-
 /* Watermark encode
  * Bit 8:   Unit; 0:1, 1:16
  * Bit 7-0: Value to be multiplied with unit
@@ -2224,14 +2218,14 @@ static const struct felix_info felix_info_vsc9959 = {
 	.vcap_pol_base2		= 0,
 	.vcap_pol_max2		= 0,
 	.num_mact_rows		= 2048,
-	.num_ports		= 6,
+	.num_ports		= VSC9959_NUM_PORTS,
 	.num_tx_queues		= OCELOT_NUM_TC,
 	.quirk_no_xtr_irq	= true,
 	.ptp_caps		= &vsc9959_ptp_caps,
 	.mdio_bus_alloc		= vsc9959_mdio_bus_alloc,
 	.mdio_bus_free		= vsc9959_mdio_bus_free,
 	.phylink_validate	= vsc9959_phylink_validate,
-	.prevalidate_phy_mode	= vsc9959_prevalidate_phy_mode,
+	.port_modes		= vsc9959_port_modes,
 	.port_setup_tc		= vsc9959_port_setup_tc,
 	.port_sched_speed_set	= vsc9959_sched_speed_set,
 	.init_regmap		= ocelot_regmap_init,

drivers/net/dsa/ocelot/seville_vsc9953.c

@@ -14,11 +14,29 @@
 #include <linux/iopoll.h>
 #include "felix.h"
 
+#define VSC9953_NUM_PORTS			10
+
 #define VSC9953_VCAP_POLICER_BASE		11
 #define VSC9953_VCAP_POLICER_MAX		31
 #define VSC9953_VCAP_POLICER_BASE2		120
 #define VSC9953_VCAP_POLICER_MAX2		161
 
+#define VSC9953_PORT_MODE_SERDES		(OCELOT_PORT_MODE_SGMII | \
+						 OCELOT_PORT_MODE_QSGMII)
+
+static const u32 vsc9953_port_modes[VSC9953_NUM_PORTS] = {
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	VSC9953_PORT_MODE_SERDES,
+	OCELOT_PORT_MODE_INTERNAL,
+	OCELOT_PORT_MODE_INTERNAL,
+};
+
 static const u32 vsc9953_ana_regmap[] = {
 	REG(ANA_ADVLEARN,			0x00b500),
 	REG(ANA_VLANMASK,			0x00b504),
@@ -938,25 +956,6 @@ static void vsc9953_phylink_validate(struct ocelot *ocelot, int port,
 	linkmode_and(state->advertising, state->advertising, mask);
 }
 
-static int vsc9953_prevalidate_phy_mode(struct ocelot *ocelot, int port,
-					phy_interface_t phy_mode)
-{
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_INTERNAL:
-		if (port != 8 && port != 9)
-			return -ENOTSUPP;
-		return 0;
-	case PHY_INTERFACE_MODE_SGMII:
-	case PHY_INTERFACE_MODE_QSGMII:
-		/* Not supported on internal to-CPU ports */
-		if (port == 8 || port == 9)
-			return -ENOTSUPP;
-		return 0;
-	default:
-		return -ENOTSUPP;
-	}
-}
-
 /* Watermark encode
  * Bit 9:   Unit; 0:1, 1:16
  * Bit 8-0: Value to be multiplied with unit
@@ -1094,12 +1093,12 @@ static const struct felix_info seville_info_vsc9953 = {
 	.vcap_pol_base2		= VSC9953_VCAP_POLICER_BASE2,
 	.vcap_pol_max2		= VSC9953_VCAP_POLICER_MAX2,
 	.num_mact_rows		= 2048,
-	.num_ports		= 10,
+	.num_ports		= VSC9953_NUM_PORTS,
 	.num_tx_queues		= OCELOT_NUM_TC,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
 	.mdio_bus_free		= vsc9953_mdio_bus_free,
 	.phylink_validate	= vsc9953_phylink_validate,
-	.prevalidate_phy_mode	= vsc9953_prevalidate_phy_mode,
+	.port_modes		= vsc9953_port_modes,
 	.init_regmap		= ocelot_regmap_init,
 };