media: ti-vpe: cal: remove useless CAL_GEN_* macros

These macros only obfuscate the code, so drop them.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/platform/ti-vpe/cal.c

@@ -777,10 +777,8 @@ static void csi2_phy_init(struct cal_ctx *ctx)
 
 	/* 3.B. Program Stop States */
 	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
-	set_field(&val, CAL_GEN_ENABLE,
-		  CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
-	set_field(&val, CAL_GEN_DISABLE,
-		  CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
+	set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
+	set_field(&val, 0, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
 	set_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
 	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
@@ -789,8 +787,7 @@ static void csi2_phy_init(struct cal_ctx *ctx)
 
 	/* 4. Force FORCERXMODE */
 	val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
-	set_field(&val, CAL_GEN_ENABLE,
-		  CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
+	set_field(&val, 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
 	reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
 		ctx->csi2_port,
@@ -849,8 +846,7 @@ static void csi2_wait_for_phy(struct cal_ctx *ctx)
 	for (i = 0; i < 10; i++) {
 		if (reg_read_field(ctx->dev,
 				   CAL_CSI2_TIMING(ctx->csi2_port),
-				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) ==
-		    CAL_GEN_DISABLE)
+				   CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
 			break;
 		usleep_range(1000, 1100);
 	}
@@ -944,13 +940,13 @@ static void csi2_ppi_enable(struct cal_ctx *ctx)
 {
 	reg_write(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port), BIT(3));
 	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
-			CAL_GEN_ENABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+			1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
 }
 
 static void csi2_ppi_disable(struct cal_ctx *ctx)
 {
 	reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
-			CAL_GEN_DISABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+			0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
 }
 
 static void csi2_ctx_config(struct cal_ctx *ctx)
@@ -1025,7 +1021,7 @@ static void pix_proc_config(struct cal_ctx *ctx)
 	set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
 	set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
 	set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
-	set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK);
+	set_field(&val, 1, CAL_PIX_PROC_EN_MASK);
 	reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
 		reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)));
@@ -1045,7 +1041,7 @@ static void cal_wr_dma_config(struct cal_ctx *ctx,
 		  CAL_WR_DMA_CTRL_MODE_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
 		  CAL_WR_DMA_CTRL_PATTERN_MASK);
-	set_field(&val, CAL_GEN_ENABLE, CAL_WR_DMA_CTRL_STALL_RD_MASK);
+	set_field(&val, 1, CAL_WR_DMA_CTRL_STALL_RD_MASK);
 	reg_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val);
 	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port,
 		reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)));

drivers/media/platform/ti-vpe/cal_regs.h

@@ -100,15 +100,6 @@
 /* CAL Control Module Core Camerrx Control register offsets */
 #define CM_CTRL_CORE_CAMERRX_CONTROL	0x000
 
-/*********************************************************************
-* Generic value used in various field below
-*********************************************************************/
-
-#define CAL_GEN_DISABLE			0
-#define CAL_GEN_ENABLE			1
-#define CAL_GEN_FALSE			0
-#define CAL_GEN_TRUE			1
-
 /*********************************************************************
 * Field Definition Macros
 *********************************************************************/