Skip to content

L
linux
Commit ad0561d4 authored by Masahiro Yamada's avatar Masahiro Yamada
Browse files
Options

ARM: dts: uniphier: use clock/reset controllers 

The UniPhier reset controller driver has been merged.  Enable it.
Also, replace the fixed-rate clocks with the dedicated clock
drivers.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 3bdba5ac
Hide whitespace changes
Inline Side-by-side
Showing with 254 additions and 112 deletions
arch/arm/boot/dts/uniphier-common32.dtsi
View file @ ad0561d4
/*
* Device Tree Source commonly used by UniPhier ARM SoCs
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -71,7 +72,7 @@ serial0: serial@54006800 {
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart_clk>;
clocks = <&peri_clk 0>;
};
serial1: serial@54006900 {
......@@ -81,7 +82,7 @@ serial1: serial@54006900 {
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart_clk>;
clocks = <&peri_clk 1>;
};
serial2: serial@54006a00 {
......@@ -91,7 +92,7 @@ serial2: serial@54006a00 {
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&uart_clk>;
clocks = <&peri_clk 2>;
};
serial3: serial@54006b00 {
......@@ -101,7 +102,7 @@ serial3: serial@54006b00 {
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&uart_clk>;
clocks = <&peri_clk 3>;
};
system_bus: system-bus@58c00000 {
......@@ -119,6 +120,34 @@ smpctrl@59800000 {
reg = <0x59801000 0x400>;
};
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
mio_clk: clock {
#clock-cells = <1>;
};
mio_rst: reset {
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
#clock-cells = <1>;
};
peri_rst: reset {
#reset-cells = <1>;
};
};
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
......@@ -149,6 +178,20 @@ pinctrl: pinctrl {
/* specify compatible in each SoC DTSI */
};
};
sysctrl@61840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
sys_clk: clock {
#clock-cells = <1>;
};
sys_rst: reset {
#reset-cells = <1>;
};
};
};
};
......
arch/arm/boot/dts/uniphier-ld4.dtsi
View file @ ad0561d4
......@@ -67,18 +67,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <36864000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
};
};
......@@ -103,7 +91,7 @@ i2c0: i2c@58400000 {
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
......@@ -116,7 +104,7 @@ i2c1: i2c@58480000 {
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
......@@ -129,7 +117,7 @@ i2c2: i2c@58500000 {
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
......@@ -142,7 +130,7 @@ i2c3: i2c@58580000 {
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
......@@ -153,6 +141,8 @@ usb0: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
};
usb1: usb@5a810100 {
......@@ -162,6 +152,8 @@ usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
};
usb2: usb@5a820100 {
......@@ -171,6 +163,8 @@ usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
};
};
......@@ -183,6 +177,31 @@ &serial3 {
interrupts = <0 29 4>;
};
&mio_clk {
compatible = "socionext,uniphier-ld4-mio-clock";
};
&mio_rst {
compatible = "socionext,uniphier-ld4-mio-reset";
resets = <&sys_rst 7>;
};
&peri_clk {
compatible = "socionext,uniphier-ld4-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-ld4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-ld4-pinctrl";
};
&sys_clk {
compatible = "socionext,uniphier-ld4-clock";
};
&sys_rst {
compatible = "socionext,uniphier-ld4-reset";
};
arch/arm/boot/dts/uniphier-pro4.dtsi
View file @ ad0561d4
......@@ -75,18 +75,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <73728000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
};
......@@ -111,7 +99,7 @@ i2c0: i2c@58780000 {
interrupts = <0 41 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
......@@ -124,7 +112,7 @@ i2c1: i2c@58781000 {
interrupts = <0 42 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
......@@ -137,7 +125,7 @@ i2c2: i2c@58782000 {
interrupts = <0 43 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 6>;
clock-frequency = <100000>;
};
......@@ -150,7 +138,7 @@ i2c3: i2c@58783000 {
interrupts = <0 44 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
......@@ -163,7 +151,7 @@ i2c5: i2c@58785000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 9>;
clock-frequency = <400000>;
};
......@@ -174,7 +162,7 @@ i2c6: i2c@58786000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 10>;
clock-frequency = <400000>;
};
......@@ -185,6 +173,8 @@ usb2: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
};
usb3: usb@5a810100 {
......@@ -194,6 +184,8 @@ usb3: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
};
};
......@@ -201,6 +193,31 @@ &refclk {
clock-frequency = <25000000>;
};
&mio_clk {
compatible = "socionext,uniphier-pro4-mio-clock";
};
&mio_rst {
compatible = "socionext,uniphier-pro4-mio-reset";
resets = <&sys_rst 7>;
};
&peri_clk {
compatible = "socionext,uniphier-pro4-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pro4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
&sys_clk {
compatible = "socionext,uniphier-pro4-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pro4-reset";
};
arch/arm/boot/dts/uniphier-pro5.dtsi
View file @ ad0561d4
......@@ -75,18 +75,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <73728000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
};
......@@ -123,7 +111,7 @@ i2c0: i2c@58780000 {
interrupts = <0 41 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
......@@ -136,7 +124,7 @@ i2c1: i2c@58781000 {
interrupts = <0 42 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
......@@ -149,7 +137,7 @@ i2c2: i2c@58782000 {
interrupts = <0 43 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 6>;
clock-frequency = <100000>;
};
......@@ -162,7 +150,7 @@ i2c3: i2c@58783000 {
interrupts = <0 44 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
......@@ -175,7 +163,7 @@ i2c5: i2c@58785000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 9>;
clock-frequency = <400000>;
};
......@@ -186,7 +174,7 @@ i2c6: i2c@58786000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 10>;
clock-frequency = <400000>;
};
};
......@@ -195,6 +183,30 @@ &refclk {
clock-frequency = <20000000>;
};
&mio_clk {
compatible = "socionext,uniphier-pro5-mio-clock";
};
&mio_rst {
compatible = "socionext,uniphier-pro5-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-pro5-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pro5-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro5-pinctrl";
};
&sys_clk {
compatible = "socionext,uniphier-pro5-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pro5-reset";
};
arch/arm/boot/dts/uniphier-pxs2.dtsi
View file @ ad0561d4
......@@ -91,18 +91,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <88900000>;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
};
......@@ -127,7 +115,7 @@ i2c0: i2c@58780000 {
interrupts = <0 41 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
......@@ -140,7 +128,7 @@ i2c1: i2c@58781000 {
interrupts = <0 42 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
......@@ -153,7 +141,7 @@ i2c2: i2c@58782000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
interrupts = <0 43 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 6>;
clock-frequency = <100000>;
};
......@@ -166,7 +154,7 @@ i2c3: i2c@58783000 {
interrupts = <0 44 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
......@@ -177,7 +165,7 @@ i2c4: i2c@58784000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 8>;
clock-frequency = <400000>;
};
......@@ -188,7 +176,7 @@ i2c5: i2c@58785000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 9>;
clock-frequency = <400000>;
};
......@@ -199,7 +187,7 @@ i2c6: i2c@58786000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&i2c_clk>;
clocks = <&peri_clk 10>;
clock-frequency = <400000>;
};
};
......@@ -208,6 +196,30 @@ &refclk {
clock-frequency = <25000000>;
};
&mio_clk {
compatible = "socionext,uniphier-pxs2-mio-clock";
};
&mio_rst {
compatible = "socionext,uniphier-pxs2-mio-reset";
};
&peri_clk {
compatible = "socionext,uniphier-pxs2-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-pxs2-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pxs2-pinctrl";
};
&sys_clk {
compatible = "socionext,uniphier-pxs2-clock";
};
&sys_rst {
compatible = "socionext,uniphier-pxs2-reset";
};
arch/arm/boot/dts/uniphier-sld3.dtsi
View file @ ad0561d4
......@@ -86,18 +86,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <36864000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
};
soc {
......@@ -146,7 +134,7 @@ serial0: serial@54006800 {
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
......@@ -155,7 +143,7 @@ serial1: serial@54006900 {
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
......@@ -164,7 +152,7 @@ serial2: serial@54006a00 {
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
......@@ -175,7 +163,7 @@ i2c0: i2c@58400000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
clocks = <&iobus_clk>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
......@@ -186,7 +174,7 @@ i2c1: i2c@58480000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
clocks = <&iobus_clk>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
......@@ -197,7 +185,7 @@ i2c2: i2c@58500000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
clocks = <&iobus_clk>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
......@@ -208,7 +196,7 @@ i2c3: i2c@58580000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
clocks = <&iobus_clk>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
......@@ -219,7 +207,7 @@ i2c4: i2c@58600000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 1>;
clocks = <&iobus_clk>;
clocks = <&sys_clk 1>;
clock-frequency = <400000>;
};
......@@ -236,6 +224,22 @@ smpctrl@59800000 {
reg = <0x59801000 0x400>;
};
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
mio_clk: clock {
compatible = "socionext,uniphier-sld3-mio-clock";
#clock-cells = <1>;
};
mio_rst: reset {
compatible = "socionext,uniphier-sld3-mio-reset";
#reset-cells = <1>;
};
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
......@@ -263,5 +267,21 @@ usb3: usb@5a830100 {
reg = <0x5a830100 0x100>;
interrupts = <0 83 4>;
};
sysctrl@f1840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0xf1840000 0x4000>;
sys_clk: clock {
compatible = "socionext,uniphier-sld3-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-sld3-reset";
#reset-cells = <1>;
};
};
};
};
arch/arm/boot/dts/uniphier-sld8.dtsi
View file @ ad0561d4
......@@ -67,18 +67,6 @@ arm_timer_clk: arm_timer_clk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <80000000>;
};
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
};
};
......@@ -103,7 +91,7 @@ i2c0: i2c@58400000 {
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
......@@ -116,7 +104,7 @@ i2c1: i2c@58480000 {
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
......@@ -129,7 +117,7 @@ i2c2: i2c@58500000 {
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
......@@ -142,7 +130,7 @@ i2c3: i2c@58580000 {
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&iobus_clk>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
......@@ -153,6 +141,8 @@ usb0: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
};
usb1: usb@5a810100 {
......@@ -162,6 +152,8 @@ usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
};
usb2: usb@5a820100 {
......@@ -171,6 +163,8 @@ usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
};
};
......@@ -182,6 +176,31 @@ &serial3 {
interrupts = <0 29 4>;
};
&mio_clk {
compatible = "socionext,uniphier-sld8-mio-clock";
};
&mio_rst {
compatible = "socionext,uniphier-sld8-mio-reset";
resets = <&sys_rst 7>;
};
&peri_clk {
compatible = "socionext,uniphier-sld8-peri-clock";
};
&peri_rst {
compatible = "socionext,uniphier-sld8-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-sld8-pinctrl";
};
&sys_clk {
compatible = "socionext,uniphier-sld8-clock";
};
&sys_rst {
compatible = "socionext,uniphier-sld8-reset";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7