Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: skip probe if there are no devices on the port (v2)"
  Revert "via82cxxx: workaround h/w bugs"

drivers/ide/ide-probe.c

@@ -695,14 +695,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	rc = ide_port_wait_ready(hwif);
-	if (rc == -ENODEV) {
-		printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
-		goto out;
-	} else if (rc == -EBUSY)
-		printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
-	else
-		rc = -ENODEV;
+	if (ide_port_wait_ready(hwif) == -EBUSY)
+		printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
 
 	/*
 	 * Second drive should only exist if first drive was found,
@@ -713,7 +707,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
 		if (drive->dev_flags & IDE_DFLAG_PRESENT)
 			rc = 0;
 	}
-out:
+
 	/*
 	 * Use cached IRQ number. It might be (and is...) changed by probe
 	 * code above

drivers/ide/via82cxxx.c

@@ -110,7 +110,6 @@ struct via82cxxx_dev
 {
 	struct via_isa_bridge *via_config;
 	unsigned int via_80w;
-	u8 cached_device[2];
 };
 
 /**
@@ -403,66 +402,10 @@ static const struct ide_port_ops via_port_ops = {
 	.cable_detect		= via82cxxx_cable_detect,
 };
 
-static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
-	struct via82cxxx_dev *vdev = hwif->host->host_priv;
-
-	outb(ctl, hwif->io_ports.ctl_addr);
-	outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
-}
-
-static void __via_dev_select(ide_drive_t *drive, u8 select)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct via82cxxx_dev *vdev = hwif->host->host_priv;
-
-	outb(select, hwif->io_ports.device_addr);
-	vdev->cached_device[hwif->channel] = select;
-}
-
-static void via_dev_select(ide_drive_t *drive)
-{
-	__via_dev_select(drive, drive->select | ATA_DEVICE_OBS);
-}
-
-static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-
-	if (valid & IDE_VALID_FEATURE)
-		outb(tf->feature, io_ports->feature_addr);
-	if (valid & IDE_VALID_NSECT)
-		outb(tf->nsect, io_ports->nsect_addr);
-	if (valid & IDE_VALID_LBAL)
-		outb(tf->lbal, io_ports->lbal_addr);
-	if (valid & IDE_VALID_LBAM)
-		outb(tf->lbam, io_ports->lbam_addr);
-	if (valid & IDE_VALID_LBAH)
-		outb(tf->lbah, io_ports->lbah_addr);
-	if (valid & IDE_VALID_DEVICE)
-		__via_dev_select(drive, tf->device);
-}
-
-const struct ide_tp_ops via_tp_ops = {
-	.exec_command		= ide_exec_command,
-	.read_status		= ide_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.write_devctl		= via_write_devctl,
-
-	.dev_select		= via_dev_select,
-	.tf_load		= via_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= ide_input_data,
-	.output_data		= ide_output_data,
-};
-
 static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_via82cxxx,
 	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
-	.tp_ops		= &via_tp_ops,
 	.port_ops	= &via_port_ops,
 	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
 			  IDE_HFLAG_POST_SET_MODE |