Commit ad6b646f authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Add support for the WM8350 watchdog
  [WATCHDOG] Add SMSC SCH311x Watchdog Timer.
  [WATCHDOG] ib700wdt - add timeout parameter
parents 61420f59 006948ba
......@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called softdog.
config WM8350_WATCHDOG
tristate "WM8350 watchdog"
depends on MFD_WM8350
help
Support for the watchdog in the WM8350 AudioPlus PMIC. When
the watchdog triggers the system will be reset.
# ALPHA Architecture
# ARM Architecture
......@@ -551,6 +558,18 @@ config CPU5_WDT
To compile this driver as a module, choose M here: the
module will be called cpu5wdt.
config SMSC_SCH311X_WDT
tristate "SMSC SCH311X Watchdog Timer"
depends on X86
---help---
This is the driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
(LPC IO with 8042 KBC, Reset Generation, HWM and multiple
serial ports).
To compile this driver as a module, choose M here: the
module will be called sch311x_wdt.
config SMSC37B787_WDT
tristate "Winbond SMsC37B787 Watchdog Timer"
depends on X86
......
......@@ -83,6 +83,7 @@ obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
......@@ -133,4 +134,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
# XTENSA Architecture
# Architecture Independant
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
......@@ -91,32 +91,16 @@ static char expect_close;
*
*/
static int wd_times[] = {
30, /* 0x0 */
28, /* 0x1 */
26, /* 0x2 */
24, /* 0x3 */
22, /* 0x4 */
20, /* 0x5 */
18, /* 0x6 */
16, /* 0x7 */
14, /* 0x8 */
12, /* 0x9 */
10, /* 0xA */
8, /* 0xB */
6, /* 0xC */
4, /* 0xD */
2, /* 0xE */
0, /* 0xF */
};
#define WDT_STOP 0x441
#define WDT_START 0x443
/* Default timeout */
#define WD_TIMO 0 /* 30 seconds +/- 20%, from table */
static int wd_margin = WD_TIMO;
#define WATCHDOG_TIMEOUT 30 /* 30 seconds +/- 20% */
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 0<= timeout <=30, default="
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
......@@ -131,6 +115,8 @@ MODULE_PARM_DESC(nowayout,
static void ibwdt_ping(void)
{
int wd_margin = 15 - ((timeout + 1) / 2);
spin_lock(&ibwdt_lock);
/* Write a watchdog value */
......@@ -148,15 +134,10 @@ static void ibwdt_disable(void)
static int ibwdt_set_heartbeat(int t)
{
int i;
if ((t < 0) || (t > 30))
if (t < 0 || t > 30)
return -EINVAL;
for (i = 0x0F; i > -1; i--)
if (wd_times[i] >= t)
break;
wd_margin = i;
timeout = t;
return 0;
}
......@@ -240,7 +221,7 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(wd_times[wd_margin], p);
return put_user(timeout, p);
default:
return -ENOTTY;
......@@ -317,6 +298,14 @@ static int __devinit ibwdt_probe(struct platform_device *dev)
goto out_nostartreg;
}
/* Check that the heartbeat value is within it's range ;
* if not reset to the default */
if (ibwdt_set_heartbeat(timeout)) {
ibwdt_set_heartbeat(WATCHDOG_TIMEOUT);
printk(KERN_INFO PFX
"timeout value must be 0<=x<=30, using %d\n", timeout);
}
res = misc_register(&ibwdt_miscdev);
if (res) {
printk(KERN_ERR PFX "failed to register misc device\n");
......
/*
* sch311x_wdt.c - Driver for the SCH311x Super-I/O chips
* integrated watchdog.
*
* (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*/
/*
* Includes, defines, variables, module parameters, ...
*/
/* Includes */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/... */
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV
(WATCHDOG_MINOR) */
#include <linux/watchdog.h> /* For the watchdog specific items */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
#include <linux/platform_device.h> /* For platform_driver framework */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
#include <linux/io.h> /* For inb/outb/... */
/* Module and version information */
#define DRV_NAME "sch311x_wdt"
#define PFX DRV_NAME ": "
/* Runtime registers */
#define RESGEN 0x1d
#define GP60 0x47
#define WDT_TIME_OUT 0x65
#define WDT_VAL 0x66
#define WDT_CFG 0x67
#define WDT_CTRL 0x68
/* internal variables */
static unsigned long sch311x_wdt_is_open;
static char sch311x_wdt_expect_close;
static struct platform_device *sch311x_wdt_pdev;
static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 };
static struct { /* The devices private data */
/* the Runtime Register base address */
unsigned short runtime_reg;
/* The card's boot status */
int boot_status;
/* the lock for io operations */
spinlock_t io_lock;
} sch311x_wdt_data;
/* Module load parameters */
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
static unsigned short therm_trip;
module_param(therm_trip, ushort, 0);
MODULE_PARM_DESC(therm_trip, "Should a ThermTrip trigger the reset generator");
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 1<= timeout <=15300, default="
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Super-IO functions
*/
static inline void sch311x_sio_enter(int sio_config_port)
{
outb(0x55, sio_config_port);
}
static inline void sch311x_sio_exit(int sio_config_port)
{
outb(0xaa, sio_config_port);
}
static inline int sch311x_sio_inb(int sio_config_port, int reg)
{
outb(reg, sio_config_port);
return inb(sio_config_port + 1);
}
static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
{
outb(reg, sio_config_port);
outb(val, sio_config_port + 1);
}
/*
* Watchdog Operations
*/
static void sch311x_wdt_set_timeout(int t)
{
unsigned char timeout_unit = 0x80;
/* When new timeout is bigger then 255 seconds, we will use minutes */
if (t > 255) {
timeout_unit = 0;
t /= 60;
}
/* -- Watchdog Timeout --
* Bit 0-6 (Reserved)
* Bit 7 WDT Time-out Value Units Select
* (0 = Minutes, 1 = Seconds)
*/
outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT);
/* -- Watchdog Timer Time-out Value --
* Bit 0-7 Binary coded units (0=Disabled, 1..255)
*/
outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL);
}
static void sch311x_wdt_start(void)
{
spin_lock(&sch311x_wdt_data.io_lock);
/* set watchdog's timeout */
sch311x_wdt_set_timeout(timeout);
/* enable the watchdog */
/* -- General Purpose I/O Bit 6.0 --
* Bit 0, In/Out: 0 = Output, 1 = Input
* Bit 1, Polarity: 0 = No Invert, 1 = Invert
* Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT,
* 10 = Either Edge Triggered Intr.4
* Bit 4-6 (Reserved)
* Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
*/
outb(0x0e, sch311x_wdt_data.runtime_reg + GP60);
spin_unlock(&sch311x_wdt_data.io_lock);
}
static void sch311x_wdt_stop(void)
{
spin_lock(&sch311x_wdt_data.io_lock);
/* stop the watchdog */
outb(0x01, sch311x_wdt_data.runtime_reg + GP60);
/* disable timeout by setting it to 0 */
sch311x_wdt_set_timeout(0);
spin_unlock(&sch311x_wdt_data.io_lock);
}
static void sch311x_wdt_keepalive(void)
{
spin_lock(&sch311x_wdt_data.io_lock);
sch311x_wdt_set_timeout(timeout);
spin_unlock(&sch311x_wdt_data.io_lock);
}
static int sch311x_wdt_set_heartbeat(int t)
{
if (t < 1 || t > (255*60))
return -EINVAL;
/* When new timeout is bigger then 255 seconds,
* we will round up to minutes (with a max of 255) */
if (t > 255)
t = (((t - 1) / 60) + 1) * 60;
timeout = t;
return 0;
}
static void sch311x_wdt_get_status(int *status)
{
unsigned char new_status;
*status = 0;
spin_lock(&sch311x_wdt_data.io_lock);
/* -- Watchdog timer control --
* Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
* Bit 1 Reserved
* Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
* Bit 3 P20 Force Timeout enabled:
* 0 = P20 activity does not generate the WD timeout event
* 1 = P20 Allows rising edge of P20, from the keyboard
* controller, to force the WD timeout event.
* Bit 4-7 Reserved
*/
new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL);
if (new_status & 0x01)
*status |= WDIOF_CARDRESET;
spin_unlock(&sch311x_wdt_data.io_lock);
}
/*
* /dev/watchdog handling
*/
static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
sch311x_wdt_expect_close = 0;
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
sch311x_wdt_expect_close = 42;
}
}
sch311x_wdt_keepalive();
}
return count;
}
static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int status;
int new_timeout;
void __user *argp = (void __user *)arg;
int __user *p = argp;
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = DRV_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
if (copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
break;
case WDIOC_GETSTATUS:
{
sch311x_wdt_get_status(&status);
return put_user(status, p);
}
case WDIOC_GETBOOTSTATUS:
return put_user(sch311x_wdt_data.boot_status, p);
case WDIOC_SETOPTIONS:
{
int options, retval = -EINVAL;
if (get_user(options, p))
return -EFAULT;
if (options & WDIOS_DISABLECARD) {
sch311x_wdt_stop();
retval = 0;
}
if (options & WDIOS_ENABLECARD) {
sch311x_wdt_start();
retval = 0;
}
return retval;
}
case WDIOC_KEEPALIVE:
sch311x_wdt_keepalive();
break;
case WDIOC_SETTIMEOUT:
if (get_user(new_timeout, p))
return -EFAULT;
if (sch311x_wdt_set_heartbeat(new_timeout))
return -EINVAL;
sch311x_wdt_keepalive();
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, p);
default:
return -ENOTTY;
}
return 0;
}
static int sch311x_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &sch311x_wdt_is_open))
return -EBUSY;
/*
* Activate
*/
sch311x_wdt_start();
return nonseekable_open(inode, file);
}
static int sch311x_wdt_close(struct inode *inode, struct file *file)
{
if (sch311x_wdt_expect_close == 42) {
sch311x_wdt_stop();
} else {
printk(KERN_CRIT PFX
"Unexpected close, not stopping watchdog!\n");
sch311x_wdt_keepalive();
}
clear_bit(0, &sch311x_wdt_is_open);
sch311x_wdt_expect_close = 0;
return 0;
}
/*
* Kernel Interfaces
*/
static const struct file_operations sch311x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sch311x_wdt_write,
.unlocked_ioctl = sch311x_wdt_ioctl,
.open = sch311x_wdt_open,
.release = sch311x_wdt_close,
};
static struct miscdevice sch311x_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &sch311x_wdt_fops,
};
/*
* Init & exit routines
*/
static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned char val;
int err;
spin_lock_init(&sch311x_wdt_data.io_lock);
if (!request_region(sch311x_wdt_data.runtime_reg + RESGEN, 1,
DRV_NAME)) {
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
sch311x_wdt_data.runtime_reg + RESGEN,
sch311x_wdt_data.runtime_reg + RESGEN);
err = -EBUSY;
goto exit;
}
if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) {
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
sch311x_wdt_data.runtime_reg + GP60,
sch311x_wdt_data.runtime_reg + GP60);
err = -EBUSY;
goto exit_release_region;
}
if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4,
DRV_NAME)) {
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
sch311x_wdt_data.runtime_reg + WDT_TIME_OUT,
sch311x_wdt_data.runtime_reg + WDT_CTRL);
err = -EBUSY;
goto exit_release_region2;
}
/* Make sure that the watchdog is not running */
sch311x_wdt_stop();
/* Disable keyboard and mouse interaction and interrupt */
/* -- Watchdog timer configuration --
* Bit 0 Reserved
* Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
* Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
* Bit 3 Reserved
* Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
* 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
*/
outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG);
/* Check that the heartbeat value is within it's range ;
* if not reset to the default */
if (sch311x_wdt_set_heartbeat(timeout)) {
sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT);
dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n",
timeout);
}
/* Get status at boot */
sch311x_wdt_get_status(&sch311x_wdt_data.boot_status);
/* enable watchdog */
/* -- Reset Generator --
* Bit 0 Enable Watchdog Timer Generation: 0* = Enabled, 1 = Disabled
* Bit 1 Thermtrip Source Select: O* = No Source, 1 = Source
* Bit 2 WDT2_CTL: WDT input bit
* Bit 3-7 Reserved
*/
outb(0, sch311x_wdt_data.runtime_reg + RESGEN);
val = therm_trip ? 0x06 : 0x04;
outb(val, sch311x_wdt_data.runtime_reg + RESGEN);
err = misc_register(&sch311x_wdt_miscdev);
if (err != 0) {
dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, err);
goto exit_release_region3;
}
sch311x_wdt_miscdev.parent = dev;
dev_info(dev,
"SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
return 0;
exit_release_region3:
release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
exit_release_region2:
release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
exit_release_region:
release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1);
sch311x_wdt_data.runtime_reg = 0;
exit:
return err;
}
static int __devexit sch311x_wdt_remove(struct platform_device *pdev)
{
/* Stop the timer before we leave */
if (!nowayout)
sch311x_wdt_stop();
/* Deregister */
misc_deregister(&sch311x_wdt_miscdev);
release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1);
sch311x_wdt_data.runtime_reg = 0;
return 0;
}
static void sch311x_wdt_shutdown(struct platform_device *dev)
{
/* Turn the WDT off if we have a soft shutdown */
sch311x_wdt_stop();
}
#define sch311x_wdt_suspend NULL
#define sch311x_wdt_resume NULL
static struct platform_driver sch311x_wdt_driver = {
.probe = sch311x_wdt_probe,
.remove = __devexit_p(sch311x_wdt_remove),
.shutdown = sch311x_wdt_shutdown,
.suspend = sch311x_wdt_suspend,
.resume = sch311x_wdt_resume,
.driver = {
.owner = THIS_MODULE,
.name = DRV_NAME,
},
};
static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
{
int err = 0, reg;
unsigned short base_addr;
unsigned char dev_id;
sch311x_sio_enter(sio_config_port);
/* Check device ID. We currently know about:
* SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */
reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20);
if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
err = -ENODEV;
goto exit;
}
dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6;
/* Select logical device A (runtime registers) */
sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
/* Check if Logical Device Register is currently active */
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0)
printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n");
/* Get the base address of the runtime registers */
base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
sch311x_sio_inb(sio_config_port, 0x61);
if (!base_addr) {
printk(KERN_ERR PFX "Base address not set.\n");
err = -ENODEV;
goto exit;
}
*addr = base_addr;
printk(KERN_INFO PFX "Found an SMSC SCH311%d chip at 0x%04x\n",
dev_id, base_addr);
exit:
sch311x_sio_exit(sio_config_port);
return err;
}
static int __init sch311x_wdt_init(void)
{
int err, i, found = 0;
unsigned short addr = 0;
for (i = 0; !found && sch311x_ioports[i]; i++)
if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
found++;
if (!found)
return -ENODEV;
sch311x_wdt_data.runtime_reg = addr;
err = platform_driver_register(&sch311x_wdt_driver);
if (err)
return err;
sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr,
NULL, 0);
if (IS_ERR(sch311x_wdt_pdev)) {
err = PTR_ERR(sch311x_wdt_pdev);
goto unreg_platform_driver;
}
return 0;
unreg_platform_driver:
platform_driver_unregister(&sch311x_wdt_driver);
return err;
}
static void __exit sch311x_wdt_exit(void)
{
platform_device_unregister(sch311x_wdt_pdev);
platform_driver_unregister(&sch311x_wdt_driver);
}
module_init(sch311x_wdt_init);
module_exit(sch311x_wdt_exit);
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/*
* Watchdog driver for the wm8350
*
* Copyright (C) 2007, 2008 Wolfson Microelectronics <linux@wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
#include <linux/mfd/wm8350/core.h>
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static unsigned long wm8350_wdt_users;
static struct miscdevice wm8350_wdt_miscdev;
static int wm8350_wdt_expect_close;
static DEFINE_MUTEX(wdt_mutex);
static struct {
int time; /* Seconds */
u16 val; /* To be set in WM8350_SYSTEM_CONTROL_2 */
} wm8350_wdt_cfgs[] = {
{ 1, 0x02 },
{ 2, 0x04 },
{ 4, 0x05 },
};
static struct wm8350 *get_wm8350(void)
{
return dev_get_drvdata(wm8350_wdt_miscdev.parent);
}
static int wm8350_wdt_set_timeout(struct wm8350 *wm8350, u16 value)
{
int ret;
u16 reg;
mutex_lock(&wdt_mutex);
wm8350_reg_unlock(wm8350);
reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
reg &= ~WM8350_WDOG_TO_MASK;
reg |= value;
ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
wm8350_reg_lock(wm8350);
mutex_unlock(&wdt_mutex);
return ret;
}
static int wm8350_wdt_start(struct wm8350 *wm8350)
{
int ret;
u16 reg;
mutex_lock(&wdt_mutex);
wm8350_reg_unlock(wm8350);
reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
reg &= ~WM8350_WDOG_MODE_MASK;
reg |= 0x20;
ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
wm8350_reg_lock(wm8350);
mutex_unlock(&wdt_mutex);
return ret;
}
static int wm8350_wdt_stop(struct wm8350 *wm8350)
{
int ret;
u16 reg;
mutex_lock(&wdt_mutex);
wm8350_reg_unlock(wm8350);
reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
reg &= ~WM8350_WDOG_MODE_MASK;
ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
wm8350_reg_lock(wm8350);
mutex_unlock(&wdt_mutex);
return ret;
}
static int wm8350_wdt_kick(struct wm8350 *wm8350)
{
int ret;
u16 reg;
mutex_lock(&wdt_mutex);
reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
mutex_unlock(&wdt_mutex);
return ret;
}
static int wm8350_wdt_open(struct inode *inode, struct file *file)
{
struct wm8350 *wm8350 = get_wm8350();
int ret;
if (!wm8350)
return -ENODEV;
if (test_and_set_bit(0, &wm8350_wdt_users))
return -EBUSY;
ret = wm8350_wdt_start(wm8350);
if (ret != 0)
return ret;
return nonseekable_open(inode, file);
}
static int wm8350_wdt_release(struct inode *inode, struct file *file)
{
struct wm8350 *wm8350 = get_wm8350();
if (wm8350_wdt_expect_close)
wm8350_wdt_stop(wm8350);
else {
dev_warn(wm8350->dev, "Watchdog device closed uncleanly\n");
wm8350_wdt_kick(wm8350);
}
clear_bit(0, &wm8350_wdt_users);
return 0;
}
static ssize_t wm8350_wdt_write(struct file *file,
const char __user *data, size_t count,
loff_t *ppos)
{
struct wm8350 *wm8350 = get_wm8350();
size_t i;
if (count) {
wm8350_wdt_kick(wm8350);
if (!nowayout) {
/* In case it was set long ago */
wm8350_wdt_expect_close = 0;
/* scan to see whether or not we got the magic
character */
for (i = 0; i != count; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
wm8350_wdt_expect_close = 42;
}
}
}
return count;
}
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
.identity = "WM8350 Watchdog",
};
static long wm8350_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct wm8350 *wm8350 = get_wm8350();
int ret = -ENOTTY, time, i;
void __user *argp = (void __user *)arg;
int __user *p = argp;
u16 reg;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
ret = put_user(0, p);
break;
case WDIOC_SETOPTIONS:
{
int options;
if (get_user(options, p))
return -EFAULT;
ret = -EINVAL;
/* Setting both simultaneously means at least one must fail */
if (options == WDIOS_DISABLECARD)
ret = wm8350_wdt_start(wm8350);
if (options == WDIOS_ENABLECARD)
ret = wm8350_wdt_stop(wm8350);
break;
}
case WDIOC_KEEPALIVE:
ret = wm8350_wdt_kick(wm8350);
break;
case WDIOC_SETTIMEOUT:
ret = get_user(time, p);
if (ret)
break;
if (time == 0) {
if (nowayout)
ret = -EINVAL;
else
wm8350_wdt_stop(wm8350);
break;
}
for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++)
if (wm8350_wdt_cfgs[i].time == time)
break;
if (i == ARRAY_SIZE(wm8350_wdt_cfgs))
ret = -EINVAL;
else
ret = wm8350_wdt_set_timeout(wm8350,
wm8350_wdt_cfgs[i].val);
break;
case WDIOC_GETTIMEOUT:
reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
reg &= WM8350_WDOG_TO_MASK;
for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++)
if (wm8350_wdt_cfgs[i].val == reg)
break;
if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) {
dev_warn(wm8350->dev,
"Unknown watchdog configuration: %x\n", reg);
ret = -EINVAL;
} else
ret = put_user(wm8350_wdt_cfgs[i].time, p);
}
return ret;
}
static const struct file_operations wm8350_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wm8350_wdt_write,
.unlocked_ioctl = wm8350_wdt_ioctl,
.open = wm8350_wdt_open,
.release = wm8350_wdt_release,
};
static struct miscdevice wm8350_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wm8350_wdt_fops,
};
static int wm8350_wdt_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
if (!wm8350) {
dev_err(wm8350->dev, "No driver data supplied\n");
return -ENODEV;
}
/* Default to 4s timeout */
wm8350_wdt_set_timeout(wm8350, 0x05);
wm8350_wdt_miscdev.parent = &pdev->dev;
return misc_register(&wm8350_wdt_miscdev);
}
static int __exit wm8350_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&wm8350_wdt_miscdev);
return 0;
}
static struct platform_driver wm8350_wdt_driver = {
.probe = wm8350_wdt_probe,
.remove = wm8350_wdt_remove,
.driver = {
.name = "wm8350-wdt",
},
};
static int __init wm8350_wdt_init(void)
{
return platform_driver_register(&wm8350_wdt_driver);
}
module_init(wm8350_wdt_init);
static void __exit wm8350_wdt_exit(void)
{
platform_driver_unregister(&wm8350_wdt_driver);
}
module_exit(wm8350_wdt_exit);
MODULE_AUTHOR("Mark Brown");
MODULE_DESCRIPTION("WM8350 Watchdog");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8350-wdt");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment