Commit ad8395e1 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes and new USB device ids for your
  3.9 tree.

  The "largest" one here is a revert of a usb-storage patch that turned
  out to be incorrect, breaking existing users, which is never a good
  thing.  Everything else is pretty simple and small"

* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  USB: quatech2: only write to the tty if the port is open.
  qcserial: bind to DM/DIAG port on Gobi 1K devices
  USB: cdc-wdm: fix buffer overflow
  usb: serial: Add Rigblaster Advantage to device table
  qcaux: add Franklin U600
  usb: musb: core: fix possible build error with randconfig
  usb: cp210x new Vendor/Device IDs
  usb: gadget: pxa25x: fix disconnect reporting
  usb: dwc3: ep0: fix sparc64 build
  usb: c67x00 RetryCnt value in c67x00 TD should be 3
  usb: Correction to c67x00 TD data length mask
  usb: Makefile: fix drivers/usb/phy/ Makefile entry
  USB: added support for Cinterion's products AH6 and PLS8
  usb: gadget: fix omap_udc build errors
  USB: storage: fix Huawei mode switching regression
  USB: storage: in-kernel modeswitching is deprecated
  tools: usb: ffs-test: Fix build failure
  USB: option: add Huawei E5331
  usb: musb: omap2430: fix sparse warning
  usb: musb: omap2430: fix omap_musb_mailbox glue check again
  ...
parents cad9d566 27b351c5
......@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_USB_OTG_UTILS) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
......
......@@ -100,7 +100,7 @@ struct c67x00_urb_priv {
#define TD_PIDEP_OFFSET 0x04
#define TD_PIDEPMASK_PID 0xF0
#define TD_PIDEPMASK_EP 0x0F
#define TD_PORTLENMASK_DL 0x02FF
#define TD_PORTLENMASK_DL 0x03FF
#define TD_PORTLENMASK_PN 0xC000
#define TD_STATUS_OFFSET 0x07
......@@ -590,7 +590,7 @@ static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
{
struct c67x00_td *td;
struct c67x00_urb_priv *urbp = urb->hcpriv;
const __u8 active_flag = 1, retry_cnt = 1;
const __u8 active_flag = 1, retry_cnt = 3;
__u8 cmd = 0;
int tt = 0;
......
......@@ -1767,7 +1767,7 @@ static int udc_start(struct ci13xxx *ci)
goto put_transceiver;
}
retval = dbg_create_files(&ci->gadget.dev);
retval = dbg_create_files(ci->dev);
if (retval)
goto unreg_device;
......@@ -1796,7 +1796,7 @@ static int udc_start(struct ci13xxx *ci)
dev_err(dev, "error = %i\n", retval);
remove_dbg:
dbg_remove_files(&ci->gadget.dev);
dbg_remove_files(ci->dev);
unreg_device:
device_unregister(&ci->gadget.dev);
put_transceiver:
......@@ -1836,7 +1836,7 @@ static void udc_stop(struct ci13xxx *ci)
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
dbg_remove_files(&ci->gadget.dev);
dbg_remove_files(ci->dev);
device_unregister(&ci->gadget.dev);
/* my kobject is dynamic, I swear! */
memset(&ci->gadget, 0, sizeof(ci->gadget));
......
......@@ -56,6 +56,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_RESPONDING 7
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
#define WDM_OVERFLOW 10
#define WDM_MAX 16
......@@ -155,6 +156,7 @@ static void wdm_in_callback(struct urb *urb)
{
struct wdm_device *desc = urb->context;
int status = urb->status;
int length = urb->actual_length;
spin_lock(&desc->iuspin);
clear_bit(WDM_RESPONDING, &desc->flags);
......@@ -185,9 +187,17 @@ static void wdm_in_callback(struct urb *urb)
}
desc->rerr = status;
desc->reslength = urb->actual_length;
memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
desc->length += desc->reslength;
if (length + desc->length > desc->wMaxCommand) {
/* The buffer would overflow */
set_bit(WDM_OVERFLOW, &desc->flags);
} else {
/* we may already be in overflow */
if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
memmove(desc->ubuf + desc->length, desc->inbuf, length);
desc->length += length;
desc->reslength = length;
}
}
skip_error:
wake_up(&desc->wait);
......@@ -435,6 +445,11 @@ static ssize_t wdm_read
rv = -ENODEV;
goto err;
}
if (test_bit(WDM_OVERFLOW, &desc->flags)) {
clear_bit(WDM_OVERFLOW, &desc->flags);
rv = -ENOBUFS;
goto err;
}
i++;
if (file->f_flags & O_NONBLOCK) {
if (!test_bit(WDM_READ, &desc->flags)) {
......@@ -478,6 +493,7 @@ static ssize_t wdm_read
spin_unlock_irq(&desc->iuspin);
goto retry;
}
if (!desc->reslength) { /* zero length read */
dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
clear_bit(WDM_READ, &desc->flags);
......@@ -1004,6 +1020,7 @@ static int wdm_post_reset(struct usb_interface *intf)
struct wdm_device *desc = wdm_find_device(intf);
int rv;
clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
......
......@@ -583,6 +583,7 @@ static int dwc3_remove(struct platform_device *pdev)
break;
}
dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
return 0;
......
......@@ -23,8 +23,6 @@
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
#include "core.h"
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
......
......@@ -54,8 +54,6 @@
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
/*
* All these registers belong to OMAP's Wrapper around the
* DesignWare USB3 Core.
......@@ -465,20 +463,20 @@ static int dwc3_omap_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id of_dwc3_matach[] = {
static const struct of_device_id of_dwc3_match[] = {
{
"ti,dwc3",
},
{ },
};
MODULE_DEVICE_TABLE(of, of_dwc3_matach);
MODULE_DEVICE_TABLE(of, of_dwc3_match);
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
.remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
.of_match_table = of_dwc3_matach,
.of_match_table = of_dwc3_match,
},
};
......
......@@ -45,8 +45,6 @@
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
......
......@@ -892,6 +892,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
u32 transfer_size;
u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
......@@ -902,8 +903,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
transfer_size = roundup(req->request.length,
(u32) dep->endpoint.maxpacket);
maxpacket = dep->endpoint.maxpacket;
transfer_size = roundup(req->request.length, maxpacket);
dwc->ep0_bounced = true;
......
......@@ -2159,7 +2159,6 @@ static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_ep *dep;
int ret;
u32 reg;
......@@ -2167,8 +2166,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dev_vdbg(dwc->dev, "%s\n", __func__);
memset(&params, 0x00, sizeof(params));
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
......
......@@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
# USB Functions
obj-$(CONFIG_USB_F_ACM) += f_acm.o
f_ss_lb-y := f_loopback.o f_sourcesink.o
obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
#
# USB gadget drivers
#
......@@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
# USB Functions
obj-$(CONFIG_USB_F_ACM) += f_acm.o
f_ss_lb-y := f_loopback.o f_sourcesink.o
obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
......@@ -1757,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = {
/**
* usb_composite_probe() - register a composite driver
* @driver: the driver to register
* @bind: the callback used to allocate resources that are shared across the
* whole device, such as string IDs, and add its configurations using
* @usb_add_config(). This may fail by returning a negative errno
* value; it should return zero on successful initialization.
*
* Context: single threaded during gadget setup
*
* This function is used to register drivers using the composite driver
......
......@@ -418,6 +418,7 @@ static int audio_get_intf_req(struct usb_function *f,
req->context = audio;
req->complete = f_audio_complete;
len = min_t(size_t, sizeof(value), len);
memcpy(req->buf, &value, len);
return len;
......
......@@ -1334,27 +1334,18 @@ static int imx_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct imx_udc_struct *imx_usb;
int retval;
imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
/* first hook up the driver ... */
imx_usb->driver = driver;
imx_usb->gadget.dev.driver = &driver->driver;
retval = device_add(&imx_usb->gadget.dev);
if (retval)
goto fail;
D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_udc_enable(imx_usb);
return 0;
fail:
imx_usb->driver = NULL;
imx_usb->gadget.dev.driver = NULL;
return retval;
}
static int imx_udc_stop(struct usb_gadget *gadget,
......@@ -1370,8 +1361,6 @@ static int imx_udc_stop(struct usb_gadget *gadget,
imx_usb->gadget.dev.driver = NULL;
imx_usb->driver = NULL;
device_del(&imx_usb->gadget.dev);
D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
__func__, driver->driver.name);
......@@ -1477,6 +1466,10 @@ static int __init imx_udc_probe(struct platform_device *pdev)
imx_usb->gadget.dev.parent = &pdev->dev;
imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
ret = device_add(&imx_usb->gadget.dev);
if (retval)
goto fail4;
platform_set_drvdata(pdev, imx_usb);
usb_init_data(imx_usb);
......@@ -1488,9 +1481,11 @@ static int __init imx_udc_probe(struct platform_device *pdev)
ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
if (ret)
goto fail4;
goto fail5;
return 0;
fail5:
device_unregister(&imx_usb->gadget.dev);
fail4:
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
free_irq(imx_usb->usbd_int[i], imx_usb);
......@@ -1514,6 +1509,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
int i;
usb_del_gadget_udc(&imx_usb->gadget);
device_unregister(&imx_usb->gadget.dev);
imx_udc_disable(imx_usb);
del_timer(&imx_usb->timer);
......
......@@ -62,6 +62,7 @@
#define DRIVER_VERSION "4 October 2004"
#define OMAP_DMA_USB_W2FC_TX0 29
#define OMAP_DMA_USB_W2FC_RX0 26
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
......@@ -1310,7 +1311,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on)
}
static int omap_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
struct usb_gadget_driver *driver);
static int omap_udc_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
......
......@@ -1266,13 +1266,6 @@ static int pxa25x_udc_start(struct usb_gadget *g,
dev->gadget.dev.driver = &driver->driver;
dev->pullup = 1;
retval = device_add (&dev->gadget.dev);
if (retval) {
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
return retval;
}
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
......@@ -1310,6 +1303,10 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
}
del_timer_sync(&dev->timer);
/* report disconnect; the driver is already quiesced */
if (driver)
driver->disconnect(&dev->gadget);
/* re-init driver-visible data structures */
udc_reinit(dev);
}
......@@ -1331,7 +1328,6 @@ static int pxa25x_udc_stop(struct usb_gadget*g,
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
device_del (&dev->gadget.dev);
dump_state(dev);
return 0;
......@@ -2146,6 +2142,13 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
retval = device_add(&dev->gadget.dev);
if (retval) {
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
goto err_device_add;
}
the_controller = dev;
platform_set_drvdata(pdev, dev);
......@@ -2196,6 +2199,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
free_irq(irq, dev);
#endif
err_irq1:
device_unregister(&dev->gadget.dev);
err_device_add:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
......@@ -2217,10 +2222,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
{
struct pxa25x_udc *dev = platform_get_drvdata(pdev);
usb_del_gadget_udc(&dev->gadget);
if (dev->driver)
return -EBUSY;
usb_del_gadget_udc(&dev->gadget);
device_unregister(&dev->gadget.dev);
dev->pullup = 0;
pullup(dev);
......
......@@ -1814,11 +1814,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
udc->gadget.dev.driver = &driver->driver;
dplus_pullup(udc, 1);
retval = device_add(&udc->gadget.dev);
if (retval) {
dev_err(udc->dev, "device_add error %d\n", retval);
goto fail;
}
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
......@@ -1876,7 +1871,6 @@ static int pxa27x_udc_stop(struct usb_gadget *g,
udc->driver = NULL;
device_del(&udc->gadget.dev);
if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
......@@ -2480,13 +2474,24 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
driver_name, udc->irq, retval);
goto err_irq;
}
retval = device_add(&udc->gadget.dev);
if (retval) {
dev_err(udc->dev, "device_add error %d\n", retval);
goto err_dev_add;
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
goto err_add_udc;
pxa_init_debugfs(udc);
return 0;
err_add_udc:
device_unregister(&udc->gadget.dev);
err_dev_add:
free_irq(udc->irq, udc);
err_irq:
iounmap(udc->regs);
......@@ -2507,6 +2512,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
int gpio = udc->mach->gpio_pullup;
usb_del_gadget_udc(&udc->gadget);
device_del(&udc->gadget.dev);
usb_gadget_unregister_driver(udc->driver);
free_irq(udc->irq, udc);
pxa_cleanup_debugfs(udc);
......
......@@ -1668,8 +1668,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
static int s3c2410_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
struct s3c2410_udc *udc = to_s3c2410(g)
int retval;
struct s3c2410_udc *udc = to_s3c2410(g);
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
......@@ -1677,22 +1676,10 @@ static int s3c2410_udc_start(struct usb_gadget *g,
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
/* Bind the driver */
retval = device_add(&udc->gadget.dev);
if (retval) {
dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
goto register_error;
}
/* Enable udc */
s3c2410_udc_enable(udc);
return 0;
register_error:
udc->driver = NULL;
udc->gadget.dev.driver = NULL;
return retval;
}
static int s3c2410_udc_stop(struct usb_gadget *g,
......@@ -1700,7 +1687,6 @@ static int s3c2410_udc_stop(struct usb_gadget *g,
{
struct s3c2410_udc *udc = to_s3c2410(g);
device_del(&udc->gadget.dev);
udc->driver = NULL;
/* Disable udc */
......@@ -1842,6 +1828,13 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
/* Bind the driver */
retval = device_add(&udc->gadget.dev);
if (retval) {
dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
goto err_device_add;
}
the_controller = udc;
platform_set_drvdata(pdev, udc);
......@@ -1930,6 +1923,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
err_int:
free_irq(IRQ_USBD, udc);
err_map:
device_unregister(&udc->gadget.dev);
err_device_add:
iounmap(base_addr);
err_mem:
release_mem_region(rsrc_start, rsrc_len);
......@@ -1947,10 +1942,11 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s()\n", __func__);
usb_del_gadget_udc(&udc->gadget);
if (udc->driver)
return -EBUSY;
usb_del_gadget_udc(&udc->gadget);
device_unregister(&udc->gadget.dev);
debugfs_remove(udc->regs_info);
if (udc_info && !udc_info->udc_command &&
......
......@@ -240,8 +240,11 @@ static int gaudio_open_snd_dev(struct gaudio *card)
snd = &card->playback;
snd->filp = filp_open(fn_play, O_WRONLY, 0);
if (IS_ERR(snd->filp)) {
int ret = PTR_ERR(snd->filp);
ERROR(card, "No such PCM playback device: %s\n", fn_play);
snd->filp = NULL;
return ret;
}
pcm_file = snd->filp->private_data;
snd->substream = pcm_file->substream;
......
......@@ -748,11 +748,9 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* guard against (alleged) silicon errata */
if (cmd & CMD_IAAD)
ehci_dbg(ehci, "IAA with IAAD still set?\n");
if (ehci->async_iaa) {
if (ehci->async_iaa)
COUNT(ehci->stats.iaa);
end_unlink_async(ehci);
} else
ehci_dbg(ehci, "IAA with nothing unlinked?\n");
}
/* remote wakeup [4.3.1] */
......
......@@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
}
......@@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
else if (last_status == -EINPROGRESS && !urb->unlinked)
continue;
/* qh unlinked; token in overlay may be most current */
if (state == QH_STATE_IDLE
&& cpu_to_hc32(ehci, qtd->qtd_dma)
== hw->hw_current) {
/*
* If this was the active qtd when the qh was unlinked
* and the overlay's token is active, then the overlay
* hasn't been written back to the qtd yet so use its
* token instead of the qtd's. After the qtd is
* processed and removed, the overlay won't be valid
* any more.
*/
if (state == QH_STATE_IDLE &&
qh->qtd_list.next == &qtd->qtd_list &&
(hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
hw->hw_token &= ~ACTIVE_BIT(ehci);
/* An unlink may leave an incomplete
* async transaction in the TT buffer.
......@@ -1170,7 +1178,7 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
struct ehci_qh *prev;
/* Add to the end of the list of QHs waiting for the next IAAD */
qh->qh_state = QH_STATE_UNLINK;
qh->qh_state = QH_STATE_UNLINK_WAIT;
if (ehci->async_unlink)
ehci->async_unlink_last->unlink_next = qh;
else
......@@ -1213,9 +1221,19 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested)
/* Do only the first waiting QH (nVidia bug?) */
qh = ehci->async_unlink;
/*
* Intel (?) bug: The HC can write back the overlay region
* even after the IAA interrupt occurs. In self-defense,
* always go through two IAA cycles for each QH.
*/
if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
qh->qh_state = QH_STATE_UNLINK;
} else {
ehci->async_iaa = qh;
ehci->async_unlink = qh->unlink_next;
qh->unlink_next = NULL;
}
/* Make sure the unlinks are all visible to the hardware */
wmb();
......
......@@ -7,11 +7,6 @@
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
select TWL4030_USB if MACH_OMAP_3430SDP
select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
......
......@@ -1624,8 +1624,6 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_SYSFS
static ssize_t
musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
......@@ -1742,8 +1740,6 @@ static const struct attribute_group musb_attr_group = {
.attrs = musb_attributes,
};
#endif /* sysfs */
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
......@@ -1968,11 +1964,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (status < 0)
goto fail4;
#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
if (status)
goto fail5;
#endif
pm_runtime_put(musb->controller);
......
......@@ -51,7 +51,7 @@ struct omap2430_glue {
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
struct omap2430_glue *_glue;
static struct omap2430_glue *_glue;
static struct timer_list musb_idle_timer;
......@@ -237,9 +237,13 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;
if (glue && glue_to_musb(glue)) {
if (!glue) {
pr_err("%s: musb core is not yet initialized\n", __func__);
return;
}
glue->status = status;
} else {
if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
return;
}
......
......@@ -130,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type)
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy(&phy_list, type);
if (IS_ERR(phy)) {
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
......@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
if (IS_ERR(phy)) {
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver\n");
goto err0;
}
......@@ -301,8 +301,12 @@ EXPORT_SYMBOL(devm_usb_put_phy);
*/
void usb_put_phy(struct usb_phy *x)
{
if (x)
if (x) {
struct module *owner = x->dev->driver->owner;
put_device(x->dev);
module_put(owner);
}
}
EXPORT_SYMBOL(usb_put_phy);
......
......@@ -219,32 +219,26 @@ static int omap_control_usb_probe(struct platform_device *pdev)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"control_dev_conf");
control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
if (!control_usb->dev_conf) {
dev_err(&pdev->dev, "Failed to obtain io memory\n");
return -EADDRNOTAVAIL;
}
control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(control_usb->dev_conf))
return PTR_ERR(control_usb->dev_conf);
if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
control_usb->otghs_control = devm_request_and_ioremap(
control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
if (!control_usb->otghs_control) {
dev_err(&pdev->dev, "Failed to obtain io memory\n");
return -EADDRNOTAVAIL;
}
if (IS_ERR(control_usb->otghs_control))
return PTR_ERR(control_usb->otghs_control);
}
if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"phy_power_usb");
control_usb->phy_power = devm_request_and_ioremap(
control_usb->phy_power = devm_ioremap_resource(
&pdev->dev, res);
if (!control_usb->phy_power) {
dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
return -EADDRNOTAVAIL;
}
if (IS_ERR(control_usb->phy_power))
return PTR_ERR(control_usb->phy_power);
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
......
......@@ -212,11 +212,9 @@ static int omap_usb3_probe(struct platform_device *pdev)
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
if (!phy->pll_ctrl_base) {
dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
return -ENOMEM;
}
phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(phy->pll_ctrl_base))
return PTR_ERR(phy->pll_ctrl_base);
phy->dev = &pdev->dev;
......
......@@ -787,11 +787,9 @@ static int samsung_usbphy_probe(struct platform_device *pdev)
return -ENODEV;
}
phy_base = devm_request_and_ioremap(dev, phy_mem);
if (!phy_base) {
dev_err(dev, "%s: register mapping failed\n", __func__);
return -ENXIO;
}
phy_base = devm_ioremap_resource(dev, phy_mem);
if (IS_ERR(phy_base))
return PTR_ERR(phy_base);
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
......
......@@ -85,6 +85,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
......@@ -150,6 +151,25 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
......
......@@ -341,6 +341,8 @@ static void option_instat_callback(struct urb *urb);
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
#define CINTERION_PRODUCT_AH6 0x0055
#define CINTERION_PRODUCT_PLS8 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
......@@ -579,6 +581,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
......@@ -1260,6 +1263,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
......
......@@ -69,6 +69,7 @@ static struct usb_device_id id_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
......
......@@ -197,12 +197,15 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
if (is_gobi1k) {
/* Gobi 1K USB layout:
* 0: serial port (doesn't respond)
* 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
*/
if (ifnum == 2)
if (ifnum == 0) {
dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
altsetting = 1;
} else if (ifnum == 2)
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
......
......@@ -661,6 +661,8 @@ void qt2_process_read_urb(struct urb *urb)
__func__);
break;
}
if (port_priv->is_open)
tty_flip_buffer_push(&port->port);
newport = *(ch + 3);
......@@ -704,6 +706,7 @@ void qt2_process_read_urb(struct urb *urb)
tty_insert_flip_string(&port->port, ch, 1);
}
if (port_priv->is_open)
tty_flip_buffer_push(&port->port);
}
......
......@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
return 0;
}
/* This places the HUAWEI usb dongles in multi-port mode */
static int usb_stor_huawei_feature_init(struct us_data *us)
/* This places the HUAWEI E220 devices in multi-port mode */
int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
......@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(struct us_data *us)
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
/*
* It will send a scsi switch command called rewind' to huawei dongle.
* When the dongle receives this command at the first time,
* it will reboot immediately. After rebooted, it will ignore this command.
* So it is unnecessary to read its response.
*/
static int usb_stor_huawei_scsi_init(struct us_data *us)
{
int result = 0;
int act_len = 0;
struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcbw->Tag = 0;
bcbw->DataTransferLength = 0;
bcbw->Flags = bcbw->Lun = 0;
bcbw->Length = sizeof(rewind_cmd);
memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
US_BULK_CB_WRAP_LEN, &act_len);
US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
return result;
}
/*
* It tries to find the supported Huawei USB dongles.
* In Huawei, they assign the following product IDs
* for all of their mobile broadband dongles,
* including the new dongles in the future.
* So if the product ID is not included in this list,
* it means it is not Huawei's mobile broadband dongles.
*/
static int usb_stor_huawei_dongles_pid(struct us_data *us)
{
struct usb_interface_descriptor *idesc;
int idProduct;
idesc = &us->pusb_intf->cur_altsetting->desc;
idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
/* The first port is CDROM,
* means the dongle in the single port mode,
* and a switch command is required to be sent. */
if (idesc && idesc->bInterfaceNumber == 0) {
if ((idProduct == 0x1001)
|| (idProduct == 0x1003)
|| (idProduct == 0x1004)
|| (idProduct >= 0x1401 && idProduct <= 0x1500)
|| (idProduct >= 0x1505 && idProduct <= 0x1600)
|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
return 1;
}
}
return 0;
}
int usb_stor_huawei_init(struct us_data *us)
{
int result = 0;
if (usb_stor_huawei_dongles_pid(us)) {
if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
result = usb_stor_huawei_scsi_init(us);
else
result = usb_stor_huawei_feature_init(us);
}
return result;
}
......@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
/* This places the HUAWEI usb dongles in multi-port mode */
int usb_stor_huawei_init(struct us_data *us);
/* This places the HUAWEI E220 devices in multi-port mode */
int usb_stor_huawei_e220_init(struct us_data *us);
......@@ -53,6 +53,14 @@
* as opposed to devices that do something strangely or wrongly.
*/
/* In-kernel mode switching is deprecated. Do not add new devices to
* this list for the sole purpose of switching them to a different
* mode. Existing userspace solutions are superior.
*
* New mode switching devices should instead be added to the database
* maintained at http://www.draisberghof.de/usb_modeswitch/
*/
#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
#define NO_SDDR09
......@@ -1527,10 +1535,335 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
......
......@@ -60,7 +60,7 @@ struct usb_configuration;
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
* @descriptors: Table of full (or low) speed descriptors, using interface and
* @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
......@@ -290,6 +290,7 @@ enum {
* after function notifications
* @resume: Notifies configuration when the host restarts USB traffic,
* before function notifications
* @gadget_driver: Gadget driver controlling this driver
*
* Devices default to reporting self powered operation. Devices which rely
* on bus powered operation should report this in their @bind method.
......
......@@ -38,7 +38,7 @@
#include <unistd.h>
#include <tools/le_byteshift.h>
#include "../../include/linux/usb/functionfs.h"
#include "../../include/uapi/linux/usb/functionfs.h"
/******************** Little Endian Handling ********************************/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment