Commit adc5fc04 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-2.6
parents a72d939d 7225a3d7
......@@ -20,9 +20,7 @@ config I2C
interfaces", below.
If you want I2C support, you should say Y here and also to the
specific driver for your bus adapter(s) below. If you say Y to
"/proc file system" below, you will then get a /proc interface which
is documented in <file:Documentation/i2c/proc-interface>.
specific driver for your bus adapter(s) below.
This I2C support is also available as a module. If you want to
compile it as a module, say M here and read
......
......@@ -108,6 +108,23 @@ config I2C_ISA
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
config I2C_NFORCE2
tristate " Nvidia Nforce2"
depends on I2C && PCI && EXPERIMENTAL
help
If you say yes to this option, support will be included for the Nvidia
Nforce2 family of mainboard I2C interfaces.
This can also be built as a module which can be inserted and removed
while the kernel is running. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-nforce2.
You will also need the latest user-space utilties: you can find them
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
config I2C_PIIX4
tristate " Intel PIIX4"
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
......@@ -206,12 +206,6 @@ static int ali1535_setup(struct pci_dev *dev)
return retval;
}
static void ali1535_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
static int ali1535_transaction(struct i2c_adapter *adap)
{
int temp;
......@@ -283,7 +277,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
ali1535_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
&& (timeout++ < MAX_TIMEOUT));
......@@ -357,7 +351,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
for (timeout = 0;
(timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
timeout++) {
ali1535_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT)
......
......@@ -225,13 +225,6 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
return -ENODEV;
}
/* Internally used pause function */
static void ali15x3_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
/* Another internally used function */
static int ali15x3_transaction(struct i2c_adapter *adap)
{
......@@ -304,7 +297,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
ali15x3_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
} while ((!(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)))
&& (timeout++ < MAX_TIMEOUT));
......@@ -361,7 +354,7 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
for (timeout = 0;
(timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE);
timeout++) {
ali15x3_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT) {
......
......@@ -93,14 +93,6 @@ static unsigned short amd756_ioport = 0;
see E0 for the status bits and enabled in E2
*/
/* Internally used pause function */
static void amd756_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
#define GS_ABRT_STS (1 << 0)
#define GS_COL_STS (1 << 1)
#define GS_PRERR_STS (1 << 2)
......@@ -132,7 +124,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
dev_dbg(&adap->dev, ": SMBus busy (%04x). Waiting... \n", temp);
do {
amd756_do_pause(1);
i2c_delay(1);
temp = inw_p(SMB_GLOBAL_STATUS);
} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
(timeout++ < MAX_TIMEOUT));
......@@ -149,7 +141,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
/* We will always wait for a fraction of a second! */
do {
amd756_do_pause(1);
i2c_delay(1);
temp = inw_p(SMB_GLOBAL_STATUS);
} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
......@@ -196,7 +188,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
abort:
dev_warn(&adap->dev, ": Sending abort.\n");
outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
amd756_do_pause(100);
i2c_delay(100);
outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
return -1;
}
......
......@@ -275,8 +275,7 @@ s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
}
if (~temp[0] & AMD_SMB_STS_DONE) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(HZ/100);
i2c_delay(HZ/100);
amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
}
......
......@@ -103,7 +103,6 @@ MODULE_PARM_DESC(force_addr,
"Forcibly enable the I801 at the given address. "
"EXTREMELY DANGEROUS!");
static void i801_do_pause(unsigned int amount);
static int i801_transaction(void);
static int i801_block_transaction(union i2c_smbus_data *data,
char read_write, int command);
......@@ -178,13 +177,6 @@ static int i801_setup(struct pci_dev *dev)
return error_return;
}
static void i801_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
static int i801_transaction(void)
{
int temp;
......@@ -214,7 +206,7 @@ static int i801_transaction(void)
/* We will always wait for a fraction of a second! */
do {
i801_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
......@@ -342,7 +334,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
timeout = 0;
do {
temp = inb_p(SMBHSTSTS);
i801_do_pause(1);
i2c_delay(1);
}
while ((!(temp & 0x80))
&& (timeout++ < MAX_TIMEOUT));
......@@ -402,7 +394,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
timeout = 0;
do {
temp = inb_p(SMBHSTSTS);
i801_do_pause(1);
i2c_delay(1);
} while ((!(temp & 0x02))
&& (timeout++ < MAX_TIMEOUT));
......
This diff is collapsed.
......@@ -99,7 +99,6 @@ MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
static void piix4_do_pause(unsigned int amount);
static int piix4_transaction(void);
......@@ -208,13 +207,6 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
return error_return;
}
/* Internally used pause function */
static void piix4_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
/* Another internally used function */
static int piix4_transaction(void)
{
......@@ -245,7 +237,7 @@ static int piix4_transaction(void)
/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
do {
piix4_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
......
......@@ -99,13 +99,6 @@ static inline void sis96x_write(u8 reg, u8 data)
outb(data, sis96x_smbus_base + reg) ;
}
/* Internally used pause function */
static void sis96x_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
/* Execute a SMBus transaction.
int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
*/
......@@ -147,7 +140,7 @@ static int sis96x_transaction(int size)
/* We will always wait for a fraction of a second! */
do {
sis96x_do_pause(1);
i2c_delay(1);
temp = sis96x_read(SMB_STS);
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
......
......@@ -103,13 +103,6 @@ MODULE_PARM_DESC(force_addr,
static struct i2c_adapter vt596_adapter;
/* Internally used pause function */
static void vt596_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
/* Another internally used function */
static int vt596_transaction(void)
{
......@@ -143,7 +136,7 @@ static int vt596_transaction(void)
/* We will always wait for a fraction of a second!
I don't know if VIA needs this, Intel did */
do {
vt596_do_pause(1);
i2c_delay(1);
temp = inb_p(SMBHSTSTS);
} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
......
......@@ -494,27 +494,27 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) {
struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*10 );
return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 );
}
/* more like overshoot temperature */
static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*10);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100);
}
/* more like hysteresis temperature */
static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*10);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100);
}
static ssize_t set_temp_max(struct device *dev, const char *buf,
size_t count, int nr) {
struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10)/10;
int val = simple_strtol(buf, NULL, 10)/100;
data->temp_over[nr] = TEMP_TO_REG(val);
via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
return count;
......@@ -523,7 +523,7 @@ static ssize_t set_temp_min(struct device *dev, const char *buf,
size_t count, int nr) {
struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10)/10;
int val = simple_strtol(buf, NULL, 10)/100;
data->temp_hyst[nr] = TEMP_TO_REG(val);
via686a_write_value(client, VIA686A_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
return count;
......
......@@ -66,8 +66,6 @@
#include "i2c-keywest.h"
#undef POLLED_MODE
#define DBG(x...) do {\
if (debug > 0) \
printk(KERN_DEBUG "KW:" x); \
......@@ -85,27 +83,6 @@ int debug = 0;
static struct keywest_iface *ifaces = NULL;
#ifdef POLLED_MODE
/* This isn't fast, but will go once I implement interrupt with
* proper timeout
*/
static u8
wait_interrupt(struct keywest_iface* iface)
{
int i;
u8 isr;
for (i = 0; i < POLL_TIMEOUT; i++) {
isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
if (isr != 0)
return isr;
current->state = TASK_UNINTERRUPTIBLE;
schedule_timeout(1);
}
return isr;
}
#endif /* POLLED_MODE */
static void
do_stop(struct keywest_iface* iface, int result)
......@@ -116,16 +93,17 @@ do_stop(struct keywest_iface* iface, int result)
}
/* Main state machine for standard & standard sub mode */
static void
static int
handle_interrupt(struct keywest_iface *iface, u8 isr)
{
int ack;
int rearm_timer = 1;
DBG("handle_interrupt(), got: %x, status: %x, state: %d\n",
isr, read_reg(reg_status), iface->state);
if (isr == 0 && iface->state != state_stop) {
do_stop(iface, -1);
return;
return rearm_timer;
}
if (isr & KW_I2C_IRQ_STOP && iface->state != state_stop) {
iface->result = -1;
......@@ -196,20 +174,19 @@ handle_interrupt(struct keywest_iface *iface, u8 isr)
if (!(isr & KW_I2C_IRQ_STOP) && (++iface->stopretry) < 10)
do_stop(iface, -1);
else {
rearm_timer = 0;
iface->state = state_idle;
write_reg(reg_control, 0x00);
write_reg(reg_ier, 0x00);
#ifndef POLLED_MODE
complete(&iface->complete);
#endif /* POLLED_MODE */
}
break;
}
write_reg(reg_isr, isr);
}
#ifndef POLLED_MODE
return rearm_timer;
}
/* Interrupt handler */
static irqreturn_t
......@@ -219,11 +196,8 @@ keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
spin_lock(&iface->lock);
del_timer(&iface->timeout_timer);
handle_interrupt(iface, read_reg(reg_isr));
if (iface->state != state_idle) {
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
add_timer(&iface->timeout_timer);
}
if (handle_interrupt(iface, read_reg(reg_isr)))
mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
spin_unlock(&iface->lock);
return IRQ_HANDLED;
}
......@@ -235,16 +209,11 @@ keywest_timeout(unsigned long data)
DBG("timeout !\n");
spin_lock_irq(&iface->lock);
handle_interrupt(iface, read_reg(reg_isr));
if (iface->state != state_idle) {
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
add_timer(&iface->timeout_timer);
}
if (handle_interrupt(iface, read_reg(reg_isr)))
mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
spin_unlock(&iface->lock);
}
#endif /* POLLED_MODE */
/*
* SMBUS-type transfer entrypoint
*/
......@@ -331,24 +300,13 @@ keywest_smbus_xfer( struct i2c_adapter* adap,
write_reg(reg_subaddr, command);
/* Arm timeout */
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
add_timer(&iface->timeout_timer);
mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
/* Start sending address & enable interrupt*/
write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
write_reg(reg_ier, KW_I2C_IRQ_MASK);
#ifdef POLLED_MODE
DBG("using polled mode...\n");
/* State machine, to turn into an interrupt handler */
while(iface->state != state_idle) {
u8 isr = wait_interrupt(iface);
handle_interrupt(iface, isr);
}
#else /* POLLED_MODE */
DBG("using interrupt mode...\n");
wait_for_completion(&iface->complete);
#endif /* POLLED_MODE */
rc = iface->result;
DBG("transfer done, result: %d\n", rc);
......@@ -421,24 +379,13 @@ keywest_xfer( struct i2c_adapter *adap,
((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
/* Arm timeout */
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
add_timer(&iface->timeout_timer);
mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
/* Start sending address & enable interrupt*/
write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
write_reg(reg_ier, KW_I2C_IRQ_MASK);
#ifdef POLLED_MODE
DBG("using polled mode...\n");
/* State machine, to turn into an interrupt handler */
while(iface->state != state_idle) {
u8 isr = wait_interrupt(iface);
handle_interrupt(iface, isr);
}
#else /* POLLED_MODE */
DBG("using interrupt mode...\n");
wait_for_completion(&iface->complete);
#endif /* POLLED_MODE */
rc = iface->result;
if (rc == 0)
......@@ -540,8 +487,8 @@ create_iface(struct device_node* np)
*prate);
}
/* Select standard sub mode */
iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
/* Select standard mode by default */
iface->cur_mode |= KW_I2C_MODE_STANDARD;
/* Write mode */
write_reg(reg_mode, iface->cur_mode);
......@@ -550,7 +497,6 @@ create_iface(struct device_node* np)
write_reg(reg_ier, 0x00);
write_reg(reg_isr, KW_I2C_IRQ_MASK);
#ifndef POLLED_MODE
/* Request chip interrupt */
rc = request_irq(iface->irq, keywest_irq, 0, "keywest i2c", iface);
if (rc) {
......@@ -559,7 +505,6 @@ create_iface(struct device_node* np)
kfree(iface);
return -ENODEV;
}
#endif /* POLLED_MODE */
for (i=0; i<nchan; i++) {
struct keywest_chan* chan = &iface->channels[i];
......@@ -609,19 +554,16 @@ dispose_iface(struct keywest_iface *iface)
/* Make sure we stop all activity */
down(&iface->sem);
#ifndef POLLED_MODE
spin_lock_irq(&iface->lock);
while (iface->state != state_idle) {
spin_unlock_irq(&iface->lock);
schedule();
set_task_state(current,TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/10);
spin_lock_irq(&iface->lock);
}
#endif /* POLLED_MODE */
iface->state = state_dead;
#ifndef POLLED_MODE
spin_unlock_irq(&iface->lock);
free_irq(iface->irq, iface);
#endif /* POLLED_MODE */
up(&iface->sem);
/* Release all channels */
......
......@@ -594,4 +594,11 @@ union i2c_smbus_data {
#define i2c_is_isa_adapter(adapptr) \
((adapptr)->algo->id == I2C_ALGO_ISA)
/* Tiny delay function used by the i2c bus drivers */
static inline void i2c_delay(signed long timeout)
{
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(timeout);
}
#endif /* _LINUX_I2C_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment