Commit ae02e5d4 authored by Srinivas Pandruvada's avatar Srinivas Pandruvada Committed by Jiri Kosina

HID: intel-ish-hid: ipc layer

This layer is responsible for
- Enumerating over PCI bus
- Inform FW about host readiness
- Provide HW interface to transport layer for control and messages
- Interrupt handling and routing

Original-author: Daniel Drubin <daniel.drubin@intel.com>
Reviewed-and-tested-by: default avatarOoi, Joyce <joyce.ooi@intel.com>
Tested-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Tested-by: default avatarRann Bar-On <rb6@duke.edu>
Tested-by: default avatarAtri Bhattacharya <badshah400@aim.com>
Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 3703f53b
......@@ -10,3 +10,9 @@ intel-ishtp-objs += ishtp/client.o
intel-ishtp-objs += ishtp/bus.o
intel-ishtp-objs += ishtp/dma-if.o
intel-ishtp-objs += ishtp/client-buffers.o
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-ipc.o
intel-ish-ipc-objs := ipc/ipc.o
intel-ish-ipc-objs += ipc/pci-ish.o
ccflags-y += -Idrivers/hid/intel-ish-hid/ishtp
/*
* ISH registers definitions
*
* Copyright (c) 2012-2016, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef _ISHTP_ISH_REGS_H_
#define _ISHTP_ISH_REGS_H_
/*** IPC PCI Offsets and sizes ***/
/* ISH IPC Base Address */
#define IPC_REG_BASE 0x0000
/* Peripheral Interrupt Status Register */
#define IPC_REG_PISR_CHV_AB (IPC_REG_BASE + 0x00)
/* Peripheral Interrupt Mask Register */
#define IPC_REG_PIMR_CHV_AB (IPC_REG_BASE + 0x04)
/*BXT, CHV_K0*/
/*Peripheral Interrupt Status Register */
#define IPC_REG_PISR_BXT (IPC_REG_BASE + 0x0C)
/*Peripheral Interrupt Mask Register */
#define IPC_REG_PIMR_BXT (IPC_REG_BASE + 0x08)
/***********************************/
/* ISH Host Firmware status Register */
#define IPC_REG_ISH_HOST_FWSTS (IPC_REG_BASE + 0x34)
/* Host Communication Register */
#define IPC_REG_HOST_COMM (IPC_REG_BASE + 0x38)
/* Reset register */
#define IPC_REG_ISH_RST (IPC_REG_BASE + 0x44)
/* Inbound doorbell register Host to ISH */
#define IPC_REG_HOST2ISH_DRBL (IPC_REG_BASE + 0x48)
/* Outbound doorbell register ISH to Host */
#define IPC_REG_ISH2HOST_DRBL (IPC_REG_BASE + 0x54)
/* ISH to HOST message registers */
#define IPC_REG_ISH2HOST_MSG (IPC_REG_BASE + 0x60)
/* HOST to ISH message registers */
#define IPC_REG_HOST2ISH_MSG (IPC_REG_BASE + 0xE0)
/* REMAP2 to enable DMA (D3 RCR) */
#define IPC_REG_ISH_RMP2 (IPC_REG_BASE + 0x368)
#define IPC_REG_MAX (IPC_REG_BASE + 0x400)
/*** register bits - HISR ***/
/* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */
#define IPC_INT_HOST2ISH_BIT (1<<0)
/***********************************/
/*CHV_A0, CHV_B0*/
/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
#define IPC_INT_ISH2HOST_BIT_CHV_AB (1<<3)
/*BXT, CHV_K0*/
/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
#define IPC_INT_ISH2HOST_BIT_BXT (1<<0)
/***********************************/
/* bit corresponds ISH2HOST busy clear interrupt in PIMR register */
#define IPC_INT_ISH2HOST_CLR_MASK_BIT (1<<11)
/* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
#define IPC_INT_ISH2HOST_CLR_OFFS (0)
/* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
#define IPC_INT_ISH2HOST_CLR_BIT (1<<IPC_INT_ISH2HOST_CLR_OFFS)
/* bit corresponds busy bit in doorbell registers */
#define IPC_DRBL_BUSY_OFFS (31)
#define IPC_DRBL_BUSY_BIT (1<<IPC_DRBL_BUSY_OFFS)
#define IPC_HOST_OWNS_MSG_OFFS (30)
/*
* A0: bit means that host owns MSGnn registers and is reading them.
* ISH FW may not write to them
*/
#define IPC_HOST_OWNS_MSG_BIT (1<<IPC_HOST_OWNS_MSG_OFFS)
/*
* Host status bits (HOSTCOMM)
*/
/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
#define IPC_HOSTCOMM_READY_OFFS (7)
#define IPC_HOSTCOMM_READY_BIT (1<<IPC_HOSTCOMM_READY_OFFS)
/***********************************/
/*CHV_A0, CHV_B0*/
#define IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB (31)
#define IPC_HOSTCOMM_INT_EN_BIT_CHV_AB \
(1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB)
/*BXT, CHV_K0*/
#define IPC_PIMR_INT_EN_OFFS_BXT (0)
#define IPC_PIMR_INT_EN_BIT_BXT (1<<IPC_PIMR_INT_EN_OFFS_BXT)
#define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT (8)
#define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT \
(1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT)
/***********************************/
/*
* both Host and ISH have ILUP at bit 0
* bit corresponds host ready bit in both status registers
*/
#define IPC_ILUP_OFFS (0)
#define IPC_ILUP_BIT (1<<IPC_ILUP_OFFS)
/*
* FW status bits (relevant)
*/
#define IPC_FWSTS_ILUP 0x1
#define IPC_FWSTS_ISHTP_UP (1<<1)
#define IPC_FWSTS_DMA0 (1<<16)
#define IPC_FWSTS_DMA1 (1<<17)
#define IPC_FWSTS_DMA2 (1<<18)
#define IPC_FWSTS_DMA3 (1<<19)
#define IPC_ISH_IN_DMA \
(IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3)
/* bit corresponds host ready bit in ISH FW Status Register */
#define IPC_ISH_ISHTP_READY_OFFS (1)
#define IPC_ISH_ISHTP_READY_BIT (1<<IPC_ISH_ISHTP_READY_OFFS)
#define IPC_RMP2_DMA_ENABLED 0x1 /* Value to enable DMA, per D3 RCR */
#define IPC_MSG_MAX_SIZE 0x80
#define IPC_HEADER_LENGTH_MASK 0x03FF
#define IPC_HEADER_PROTOCOL_MASK 0x0F
#define IPC_HEADER_MNG_CMD_MASK 0x0F
#define IPC_HEADER_LENGTH_OFFSET 0
#define IPC_HEADER_PROTOCOL_OFFSET 10
#define IPC_HEADER_MNG_CMD_OFFSET 16
#define IPC_HEADER_GET_LENGTH(drbl_reg) \
(((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK)
#define IPC_HEADER_GET_PROTOCOL(drbl_reg) \
(((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK)
#define IPC_HEADER_GET_MNG_CMD(drbl_reg) \
(((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK)
#define IPC_IS_BUSY(drbl_reg) \
(((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT))
/***********************************/
/*CHV_A0, CHV_B0*/
#define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \
(((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \
((u32)IPC_INT_ISH2HOST_BIT_CHV_AB))
/*BXT, CHV_K0*/
#define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \
(((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \
((u32)IPC_INT_ISH2HOST_BIT_BXT))
/***********************************/
#define IPC_BUILD_HEADER(length, protocol, busy) \
(((busy)<<IPC_DRBL_BUSY_OFFS) | \
((protocol) << IPC_HEADER_PROTOCOL_OFFSET) | \
((length)<<IPC_HEADER_LENGTH_OFFSET))
#define IPC_BUILD_MNG_MSG(cmd, length) \
(((1)<<IPC_DRBL_BUSY_OFFS)| \
((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)| \
((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)| \
((length)<<IPC_HEADER_LENGTH_OFFSET))
#define IPC_SET_HOST_READY(host_status) \
((host_status) |= (IPC_HOSTCOMM_READY_BIT))
#define IPC_SET_HOST_ILUP(host_status) \
((host_status) |= (IPC_ILUP_BIT))
#define IPC_CLEAR_HOST_READY(host_status) \
((host_status) ^= (IPC_HOSTCOMM_READY_BIT))
#define IPC_CLEAR_HOST_ILUP(host_status) \
((host_status) ^= (IPC_ILUP_BIT))
/* todo - temp until PIMR HW ready */
#define IPC_HOST_BUSY_READING_OFFS 6
/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
#define IPC_HOST_BUSY_READING_BIT (1<<IPC_HOST_BUSY_READING_OFFS)
#define IPC_SET_HOST_BUSY_READING(host_status) \
((host_status) |= (IPC_HOST_BUSY_READING_BIT))
#define IPC_CLEAR_HOST_BUSY_READING(host_status)\
((host_status) ^= (IPC_HOST_BUSY_READING_BIT))
#define IPC_IS_ISH_ISHTP_READY(ish_status) \
(((ish_status) & IPC_ISH_ISHTP_READY_BIT) == \
((uint32_t)IPC_ISH_ISHTP_READY_BIT))
#define IPC_IS_ISH_ILUP(ish_status) \
(((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT))
#define IPC_PROTOCOL_ISHTP 1
#define IPC_PROTOCOL_MNG 3
#define MNG_RX_CMPL_ENABLE 0
#define MNG_RX_CMPL_DISABLE 1
#define MNG_RX_CMPL_INDICATION 2
#define MNG_RESET_NOTIFY 3
#define MNG_RESET_NOTIFY_ACK 4
#define MNG_SYNC_FW_CLOCK 5
#define MNG_ILLEGAL_CMD 0xFF
#endif /* _ISHTP_ISH_REGS_H_ */
/*
* H/W layer of ISHTP provider device (ISH)
*
* Copyright (c) 2014-2016, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef _ISHTP_HW_ISH_H_
#define _ISHTP_HW_ISH_H_
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "hw-ish-regs.h"
#include "ishtp-dev.h"
#define CHV_DEVICE_ID 0x22D8
#define BXT_Ax_DEVICE_ID 0x0AA2
#define BXT_Bx_DEVICE_ID 0x1AA2
#define APL_Ax_DEVICE_ID 0x5AA2
#define SPT_Ax_DEVICE_ID 0x9D35
#define REVISION_ID_CHT_A0 0x6
#define REVISION_ID_CHT_Ax_SI 0x0
#define REVISION_ID_CHT_Bx_SI 0x10
#define REVISION_ID_CHT_Kx_SI 0x20
#define REVISION_ID_CHT_Dx_SI 0x30
#define REVISION_ID_CHT_B0 0xB0
#define REVISION_ID_SI_MASK 0x70
struct ipc_rst_payload_type {
uint16_t reset_id;
uint16_t reserved;
};
struct time_sync_format {
uint8_t ts1_source;
uint8_t ts2_source;
uint16_t reserved;
} __packed;
struct ipc_time_update_msg {
uint64_t primary_host_time;
struct time_sync_format sync_info;
uint64_t secondary_host_time;
} __packed;
enum {
HOST_UTC_TIME_USEC = 0,
HOST_SYSTEM_TIME_USEC = 1
};
struct ish_hw {
void __iomem *mem_addr;
};
#define to_ish_hw(dev) (struct ish_hw *)((dev)->hw)
irqreturn_t ish_irq_handler(int irq, void *dev_id);
struct ishtp_device *ish_dev_init(struct pci_dev *pdev);
int ish_hw_start(struct ishtp_device *dev);
void ish_device_disable(struct ishtp_device *dev);
#endif /* _ISHTP_HW_ISH_H_ */
This diff is collapsed.
/*
* PCI glue for ISHTP provider device (ISH) driver
*
* Copyright (c) 2014-2016, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/miscdevice.h>
#define CREATE_TRACE_POINTS
#include <trace/events/intel_ish.h>
#include "ishtp-dev.h"
#include "hw-ish.h"
static const struct pci_device_id ish_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, APL_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
{0, }
};
MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
/**
* ish_event_tracer() - Callback function to dump trace messages
* @dev: ishtp device
* @format: printf style format
*
* Callback to direct log messages to Linux trace buffers
*/
static void ish_event_tracer(struct ishtp_device *dev, char *format, ...)
{
if (trace_ishtp_dump_enabled()) {
va_list args;
char tmp_buf[100];
va_start(args, format);
vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
va_end(args);
trace_ishtp_dump(tmp_buf);
}
}
/**
* ish_init() - Init function
* @dev: ishtp device
*
* This function initialize wait queues for suspend/resume and call
* calls hadware initialization function. This will initiate
* startup sequence
*
* Return: 0 for success or error code for failure
*/
static int ish_init(struct ishtp_device *dev)
{
int ret;
/* Set the state of ISH HW to start */
ret = ish_hw_start(dev);
if (ret) {
dev_err(dev->devc, "ISH: hw start failed.\n");
return ret;
}
/* Start the inter process communication to ISH processor */
ret = ishtp_start(dev);
if (ret) {
dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
return ret;
}
return 0;
}
/**
* ish_probe() - PCI driver probe callback
* @pdev: pci device
* @ent: pci device id
*
* Initialize PCI function, setup interrupt and call for ISH initialization
*
* Return: 0 for success or error code for failure
*/
static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct ishtp_device *dev;
struct ish_hw *hw;
int ret;
/* enable pci dev */
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "ISH: Failed to enable PCI device\n");
return ret;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for ISH driver */
ret = pci_request_regions(pdev, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "ISH: Failed to get PCI regions\n");
goto disable_device;
}
/* allocates and initializes the ISH dev structure */
dev = ish_dev_init(pdev);
if (!dev) {
ret = -ENOMEM;
goto release_regions;
}
hw = to_ish_hw(dev);
dev->print_log = ish_event_tracer;
/* mapping IO device memory */
hw->mem_addr = pci_iomap(pdev, 0, 0);
if (!hw->mem_addr) {
dev_err(&pdev->dev, "ISH: mapping I/O range failure\n");
ret = -ENOMEM;
goto free_device;
}
dev->pdev = pdev;
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
/* request and enable interrupt */
ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND,
KBUILD_MODNAME, dev);
if (ret) {
dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n",
pdev->irq);
goto free_device;
}
dev_set_drvdata(dev->devc, dev);
init_waitqueue_head(&dev->suspend_wait);
init_waitqueue_head(&dev->resume_wait);
ret = ish_init(dev);
if (ret)
goto free_irq;
return 0;
free_irq:
free_irq(pdev->irq, dev);
free_device:
pci_iounmap(pdev, hw->mem_addr);
kfree(dev);
release_regions:
pci_release_regions(pdev);
disable_device:
pci_clear_master(pdev);
pci_disable_device(pdev);
dev_err(&pdev->dev, "ISH: PCI driver initialization failed.\n");
return ret;
}
/**
* ish_remove() - PCI driver remove callback
* @pdev: pci device
*
* This function does cleanup of ISH on pci remove callback
*/
static void ish_remove(struct pci_dev *pdev)
{
struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
struct ish_hw *hw = to_ish_hw(ishtp_dev);
ishtp_bus_remove_all_clients(ishtp_dev, false);
ish_device_disable(ishtp_dev);
free_irq(pdev->irq, ishtp_dev);
pci_iounmap(pdev, hw->mem_addr);
pci_release_regions(pdev);
pci_clear_master(pdev);
pci_disable_device(pdev);
kfree(ishtp_dev);
}
static struct device *ish_resume_device;
/**
* ish_resume_handler() - Work function to complete resume
* @work: work struct
*
* The resume work function to complete resume function asynchronously.
* There are two types of platforms, one where ISH is not powered off,
* in that case a simple resume message is enough, others we need
* a reset sequence.
*/
static void ish_resume_handler(struct work_struct *work)
{
struct pci_dev *pdev = to_pci_dev(ish_resume_device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
int ret;
ishtp_send_resume(dev);
/* 50 ms to get resume response */
if (dev->resume_flag)
ret = wait_event_interruptible_timeout(dev->resume_wait,
!dev->resume_flag,
msecs_to_jiffies(50));
/*
* If no resume response. This platform is not S0ix compatible
* So on resume full reboot of ISH processor will happen, so
* need to go through init sequence again
*/
if (dev->resume_flag)
ish_init(dev);
}
/**
* ish_suspend() - ISH suspend callback
* @device: device pointer
*
* ISH suspend callback
*
* Return: 0 to the pm core
*/
static int ish_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
enable_irq_wake(pdev->irq);
/*
* If previous suspend hasn't been asnwered then ISH is likely dead,
* don't attempt nested notification
*/
if (dev->suspend_flag)
return 0;
dev->resume_flag = 0;
dev->suspend_flag = 1;
ishtp_send_suspend(dev);
/* 25 ms should be enough for live ISH to flush all IPC buf */
if (dev->suspend_flag)
wait_event_interruptible_timeout(dev->suspend_wait,
!dev->suspend_flag,
msecs_to_jiffies(25));
return 0;
}
static DECLARE_WORK(resume_work, ish_resume_handler);
/**
* ish_resume() - ISH resume callback
* @device: device pointer
*
* ISH resume callback
*
* Return: 0 to the pm core
*/
static int ish_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
ish_resume_device = device;
dev->resume_flag = 1;
disable_irq_wake(pdev->irq);
schedule_work(&resume_work);
return 0;
}
#ifdef CONFIG_PM
static const struct dev_pm_ops ish_pm_ops = {
.suspend = ish_suspend,
.resume = ish_resume,
};
#define ISHTP_ISH_PM_OPS (&ish_pm_ops)
#else
#define ISHTP_ISH_PM_OPS NULL
#endif
static struct pci_driver ish_driver = {
.name = KBUILD_MODNAME,
.id_table = ish_pci_tbl,
.probe = ish_probe,
.remove = ish_remove,
.driver.pm = ISHTP_ISH_PM_OPS,
};
static int __init ish_driver_init(void)
{
return pci_register_driver(&ish_driver);
}
static void __exit ish_driver_exit(void)
{
pci_unregister_driver(&ish_driver);
}
module_init(ish_driver_init);
module_exit(ish_driver_exit);
/* Original author */
MODULE_AUTHOR("Daniel Drubin <daniel.drubin@intel.com>");
/* Adoption to upstream Linux kernel */
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
MODULE_LICENSE("GPL");
/*
* Utility macros of ISH
*
* Copyright (c) 2014-2016, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef UTILS__H
#define UTILS__H
#define WAIT_FOR_SEND_SLICE (HZ / 10)
#define WAIT_FOR_CONNECT_SLICE (HZ / 10)
/*
* Waits for specified event when a thread that triggers event can't signal
* Also, waits *at_least* `timeinc` after condition is satisfied
*/
#define timed_wait_for(timeinc, condition) \
do { \
int completed = 0; \
do { \
unsigned long j; \
int done = 0; \
\
completed = (condition); \
for (j = jiffies, done = 0; !done; ) { \
schedule_timeout(timeinc); \
if (time_is_before_eq_jiffies(j + timeinc)) \
done = 1; \
} \
} while (!(completed)); \
} while (0)
/*
* Waits for specified event when a thread that triggers event
* can't signal with timeout (use whenever we may hang)
*/
#define timed_wait_for_timeout(timeinc, condition, timeout) \
do { \
int t = timeout; \
do { \
unsigned long j; \
int done = 0; \
\
for (j = jiffies, done = 0; !done; ) { \
schedule_timeout(timeinc); \
if (time_is_before_eq_jiffies(j + timeinc)) \
done = 1; \
} \
t -= timeinc; \
if (t <= 0) \
break; \
} while (!(condition)); \
} while (0)
#endif /* UTILS__H */
#undef TRACE_SYSTEM
#define TRACE_SYSTEM intel_ish
#if !defined(_TRACE_INTEL_ISH_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_INTEL_ISH_H
#include <linux/tracepoint.h>
TRACE_EVENT(ishtp_dump,
TP_PROTO(const char *message),
TP_ARGS(message),
TP_STRUCT__entry(
__string(message, message)
),
TP_fast_assign(
__assign_str(message, message);
),
TP_printk("%s", __get_str(message))
);
#endif /* _TRACE_INTEL_ISH_H */
/* This part must be outside protection */
#include <trace/define_trace.h>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment