Merge ../linux-2.6

Documentation/sysrq.txt

 Linux Magic System Request Key Hacks
-Documentation for sysrq.c version 1.15
-Last update: $Date: 2001/01/28 10:15:59 $
+Documentation for sysrq.c
+Last update: 2007-JAN-06
 
 *  What is the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -35,7 +35,7 @@ You can set the value in the file by the following command:
 
 Note that the value of /proc/sys/kernel/sysrq influences only the invocation
 via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always
-allowed.
+allowed (by a user with admin privileges).
 
 *  How do I use the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -58,7 +58,7 @@ On PowerPC - Press 'ALT - Print Screen (or F13) - <command key>,
 On other - If you know of the key combos for other architectures, please
            let me know so I can add them to this section.
 
-On all -  write a character to /proc/sysrq-trigger.  eg:
+On all -  write a character to /proc/sysrq-trigger.  e.g.:
 
 		echo t > /proc/sysrq-trigger
 
@@ -74,6 +74,8 @@ On all -  write a character to /proc/sysrq-trigger.  eg:
 
 'c'	- Will perform a kexec reboot in order to take a crashdump.
 
+'d'	- Shows all locks that are held.
+
 'o'     - Will shut your system off (if configured and supported).
 
 's'     - Will attempt to sync all mounted filesystems.
@@ -87,38 +89,43 @@ On all -  write a character to /proc/sysrq-trigger.  eg:
 
 'm'     - Will dump current memory info to your console.
 
+'n'	- Used to make RT tasks nice-able
+
 'v'	- Dumps Voyager SMP processor info to your console.
 
+'w'	- Dumps tasks that are in uninterruptable (blocked) state.
+
+'x'	- Used by xmon interface on ppc/powerpc platforms.
+
 '0'-'9' - Sets the console log level, controlling which kernel messages
           will be printed to your console. ('0', for example would make
           it so that only emergency messages like PANICs or OOPSes would
           make it to your console.)
 
-'f'	- Will call oom_kill to kill a memory hog process
+'f'	- Will call oom_kill to kill a memory hog process.
 
 'e'     - Send a SIGTERM to all processes, except for init.
 
-'i'     - Send a SIGKILL to all processes, except for init.
+'g'	- Used by kgdb on ppc platforms.
 
-'l'     - Send a SIGKILL to all processes, INCLUDING init. (Your system
-          will be non-functional after this.)
+'i'     - Send a SIGKILL to all processes, except for init.
 
-'h'     - Will display help ( actually any other key than those listed
+'h'     - Will display help (actually any other key than those listed
           above will display help. but 'h' is easy to remember :-)
 
 *  Okay, so what can I use them for?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Well, un'R'aw is very handy when your X server or a svgalib program crashes.
 
-sa'K' (Secure Access Key) is useful when you want to be sure there are no
-trojan program is running at console and which could grab your password
-when you would try to login. It will kill all programs on given console
-and thus letting you make sure that the login prompt you see is actually
+sa'K' (Secure Access Key) is useful when you want to be sure there is no
+trojan program running at console which could grab your password
+when you would try to login. It will kill all programs on given console,
+thus letting you make sure that the login prompt you see is actually
 the one from init, not some trojan program.
 IMPORTANT: In its true form it is not a true SAK like the one in a :IMPORTANT
 IMPORTANT: c2 compliant system, and it should not be mistaken as   :IMPORTANT
 IMPORTANT: such.                                                   :IMPORTANT
-       It seems other find it useful as (System Attention Key) which is
+       It seems others find it useful as (System Attention Key) which is
 useful when you want to exit a program that will not let you switch consoles.
 (For example, X or a svgalib program.)
 
@@ -139,8 +146,8 @@ OK or Done message...)
 Again, the unmount (remount read-only) hasn't taken place until you see the
 "OK" and "Done" message appear on the screen.
 
-The loglevel'0'-'9' is useful when your console is being flooded with
-kernel messages you do not want to see. Setting '0' will prevent all but
+The loglevels '0'-'9' are useful when your console is being flooded with
+kernel messages you do not want to see. Selecting '0' will prevent all but
 the most urgent kernel messages from reaching your console. (They will
 still be logged if syslogd/klogd are alive, though.)
 
@@ -152,7 +159,7 @@ processes.
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 That happens to me, also. I've found that tapping shift, alt, and control
 on both sides of the keyboard, and hitting an invalid sysrq sequence again
-will fix the problem. (ie, something like alt-sysrq-z). Switching to another
+will fix the problem. (i.e., something like alt-sysrq-z). Switching to another
 virtual console (ALT+Fn) and then back again should also help.
 
 *  I hit SysRq, but nothing seems to happen, what's wrong?
@@ -174,11 +181,11 @@ handler function you will use, B) a help_msg string, that will print when SysRQ
 prints help, and C) an action_msg string, that will print right before your
 handler is called. Your handler must conform to the prototype in 'sysrq.h'.
 
-After the sysrq_key_op is created, you can call the macro 
-register_sysrq_key(int key, struct sysrq_key_op *op_p) that is defined in
-sysrq.h, this will register the operation pointed to by 'op_p' at table
-key 'key', if that slot in the table is blank. At module unload time, you must
-call the macro unregister_sysrq_key(int key, struct sysrq_key_op *op_p), which
+After the sysrq_key_op is created, you can call the kernel function
+register_sysrq_key(int key, struct sysrq_key_op *op_p); this will
+register the operation pointed to by 'op_p' at table key 'key',
+if that slot in the table is blank. At module unload time, you must call
+the function unregister_sysrq_key(int key, struct sysrq_key_op *op_p), which
 will remove the key op pointed to by 'op_p' from the key 'key', if and only if
 it is currently registered in that slot. This is in case the slot has been
 overwritten since you registered it.
@@ -186,15 +193,12 @@ overwritten since you registered it.
 The Magic SysRQ system works by registering key operations against a key op
 lookup table, which is defined in 'drivers/char/sysrq.c'. This key table has
 a number of operations registered into it at compile time, but is mutable,
-and 4 functions are exported for interface to it: __sysrq_lock_table,
-__sysrq_unlock_table, __sysrq_get_key_op, and __sysrq_put_key_op. The
-functions __sysrq_swap_key_ops and __sysrq_swap_key_ops_nolock are defined
-in the header itself, and the REGISTER and UNREGISTER macros are built from
-these. More complex (and dangerous!) manipulations of the table are possible
-using these functions, but you must be careful to always lock the table before
-you read or write from it, and to unlock it again when you are done. (And of
-course, to never ever leave an invalid pointer in the table). Null pointers in
-the table are always safe :)
+and 2 functions are exported for interface to it:
+	register_sysrq_key and unregister_sysrq_key.
+Of course, never ever leave an invalid pointer in the table. I.e., when
+your module that called register_sysrq_key() exits, it must call
+unregister_sysrq_key() to clean up the sysrq key table entry that it used.
+Null pointers in the table are always safe. :)
 
 If for some reason you feel the need to call the handle_sysrq function from
 within a function called by handle_sysrq, you must be aware that you are in

MAINTAINERS

@@ -598,8 +598,6 @@ W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
 ATMEL MACB ETHERNET DRIVER
-P:	Atmel AVR32 Support Team
-M:	avr32@atmel.com
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
 S:	Supported
@@ -620,8 +618,6 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6.git
 S:	Maintained
 
 AVR32 ARCHITECTURE
-P:	Atmel AVR32 Support Team
-M:	avr32@atmel.com
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
 W:	http://www.atmel.com/products/AVR32/
@@ -630,8 +626,6 @@ W:	http://avrfreaks.net/
 S:	Supported
 
 AVR32/AT32AP MACHINE SUPPORT
-P:	Atmel AVR32 Support Team
-M:	avr32@atmel.com
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
 S:	Supported
@@ -2288,7 +2282,7 @@ P:	Jozsef Kadlecsik
 P:	Patrick McHardy
 M:	kaber@trash.net
 L:	netfilter-devel@lists.netfilter.org
-L:	netfilter@lists.netfilter.org
+L:	netfilter@lists.netfilter.org (subscribers-only)
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/

arch/i386/boot/compressed/relocs.c

@@ -43,6 +43,8 @@ static int is_safe_abs_reloc(const char* sym_name)
 			/* Match found */
 			return 1;
 	}
+	if (strncmp(sym_name, "__crc_", 6) == 0)
+		return 1;
 	return 0;
 }
 

arch/i386/mach-default/setup.c

@@ -102,7 +102,7 @@ void __init time_init_hook(void)
  *	along the MCA bus.  Use this to hook into that chain if you will need
  *	it.
  **/
-void __init mca_nmi_hook(void)
+void mca_nmi_hook(void)
 {
 	/* If I recall correctly, there's a whole bunch of other things that
 	 * we can do to check for NMI problems, but that's all I know about

arch/sparc/kernel/smp.c

@@ -292,8 +292,8 @@ int setup_profiling_timer(unsigned int multiplier)
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	extern void smp4m_boot_cpus(void);
-	extern void smp4d_boot_cpus(void);
+	extern void __init smp4m_boot_cpus(void);
+	extern void __init smp4d_boot_cpus(void);
 	int i, cpuid, extra;
 
 	printk("Entering SMP Mode...\n");
@@ -375,8 +375,8 @@ void __init smp_prepare_boot_cpu(void)
 
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	extern int smp4m_boot_one_cpu(int);
-	extern int smp4d_boot_one_cpu(int);
+	extern int __cpuinit smp4m_boot_one_cpu(int);
+	extern int __cpuinit smp4d_boot_one_cpu(int);
 	int ret=0;
 
 	switch(sparc_cpu_model) {

arch/sparc/kernel/sun4d_smp.c

@@ -164,7 +164,7 @@ void __init smp4d_boot_cpus(void)
 	local_flush_cache_all();
 }
 
-int smp4d_boot_one_cpu(int i)
+int __cpuinit smp4d_boot_one_cpu(int i)
 {
 			extern unsigned long sun4d_cpu_startup;
 			unsigned long *entry = &sun4d_cpu_startup;

drivers/char/sysrq.c

@@ -215,7 +215,7 @@ static void sysrq_handle_showstate_blocked(int key, struct tty_struct *tty)
 }
 static struct sysrq_key_op sysrq_showstate_blocked_op = {
 	.handler	= sysrq_handle_showstate_blocked,
-	.help_msg	= "showBlockedTasks",
+	.help_msg	= "shoW-blocked-tasks",
 	.action_msg	= "Show Blocked State",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -315,15 +315,16 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_loglevel_op,		/* 9 */
 
 	/*
-	 * Don't use for system provided sysrqs, it is handled specially on
-	 * sparc and will never arrive
+	 * a: Don't use for system provided sysrqs, it is handled specially on
+	 * sparc and will never arrive.
 	 */
 	NULL,				/* a */
 	&sysrq_reboot_op,		/* b */
-	&sysrq_crashdump_op,		/* c */
+	&sysrq_crashdump_op,		/* c & ibm_emac driver debug */
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
+	/* g: May be registered by ppc for kgdb */
 	NULL,				/* g */
 	NULL,				/* h */
 	&sysrq_kill_op,			/* i */
@@ -332,18 +333,19 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	NULL,				/* l */
 	&sysrq_showmem_op,		/* m */
 	&sysrq_unrt_op,			/* n */
-	/* This will often be registered as 'Off' at init time */
+	/* o: This will often be registered as 'Off' at init time */
 	NULL,				/* o */
 	&sysrq_showregs_op,		/* p */
 	NULL,				/* q */
-	&sysrq_unraw_op,			/* r */
+	&sysrq_unraw_op,		/* r */
 	&sysrq_sync_op,			/* s */
 	&sysrq_showstate_op,		/* t */
 	&sysrq_mountro_op,		/* u */
-	/* May be assigned at init time by SMP VOYAGER */
+	/* v: May be registered at init time by SMP VOYAGER */
 	NULL,				/* v */
-	NULL,				/* w */
-	&sysrq_showstate_blocked_op,	/* x */
+	&sysrq_showstate_blocked_op,	/* w */
+	/* x: May be registered on ppc/powerpc for xmon */
+	NULL,				/* x */
 	NULL,				/* y */
 	NULL				/* z */
 };

drivers/ide/ide.c

@@ -1781,9 +1781,9 @@ static int __init ide_setup(char *s)
 	return 1;
 }
 
-extern void pnpide_init(void);
-extern void pnpide_exit(void);
-extern void h8300_ide_init(void);
+extern void __init pnpide_init(void);
+extern void __exit pnpide_exit(void);
+extern void __init h8300_ide_init(void);
 
 /*
  * probe_for_hwifs() finds/initializes "known" IDE interfaces
@@ -2088,7 +2088,7 @@ int __init init_module (void)
 	return ide_init();
 }
 
-void cleanup_module (void)
+void __exit cleanup_module (void)
 {
 	int index;
 

drivers/ide/pci/via82cxxx.c

@@ -78,7 +78,7 @@ static struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
-	{ "cx7000",	PCI_DEVICE_ID_VIA_CX700,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },

drivers/kvm/vmx.c

@@ -1116,6 +1116,8 @@ static int vmx_vcpu_setup(struct kvm_vcpu *vcpu)
 
 		if (rdmsr_safe(index, &data_low, &data_high) < 0)
 			continue;
+		if (wrmsr_safe(index, data_low, data_high) < 0)
+			continue;
 		data = data_low | ((u64)data_high << 32);
 		vcpu->host_msrs[j].index = index;
 		vcpu->host_msrs[j].reserved = 0;

drivers/net/hamradio/Kconfig

@@ -113,7 +113,7 @@ config SCC_TRXECHO
 
 config BAYCOM_SER_FDX
 	tristate "BAYCOM ser12 fullduplex driver for AX.25"
-	depends on AX25
+	depends on AX25 && !S390
 	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -133,7 +133,7 @@ config BAYCOM_SER_FDX
 
 config BAYCOM_SER_HDX
 	tristate "BAYCOM ser12 halfduplex driver for AX.25"
-	depends on AX25
+	depends on AX25 && !S390
 	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -181,7 +181,7 @@ config BAYCOM_EPP
 
 config YAM
 	tristate "YAM driver for AX.25"
-	depends on AX25
+	depends on AX25 && !S390
 	help
 	  The YAM is a modem for packet radio which connects to the serial
 	  port and includes some of the functions of a Terminal Node

drivers/pci/quirks.c

@@ -661,9 +661,11 @@ static void quirk_via_bridge(struct pci_dev *dev)
 	/* See what bridge we have and find the device ranges */
 	switch (dev->device) {
 	case PCI_DEVICE_ID_VIA_82C686:
-		/* 82C686 is special */
-		via_vlink_dev_lo = 7;
-		via_vlink_dev_hi = 7;
+		/* The VT82C686 is special, it attaches to PCI and can have
+		   any device number. All its subdevices are functions of
+		   that single device. */
+		via_vlink_dev_lo = PCI_SLOT(dev->devfn);
+		via_vlink_dev_hi = PCI_SLOT(dev->devfn);
 		break;
 	case PCI_DEVICE_ID_VIA_8237:
 	case PCI_DEVICE_ID_VIA_8237A:

drivers/pci/search.c

@@ -200,11 +200,8 @@ static struct pci_dev * pci_find_subsys(unsigned int vendor,
 	 * can cause some machines to crash.  So here we detect and flag that
 	 * situation and bail out early.
 	 */
-	if (unlikely(list_empty(&pci_devices))) {
-		printk(KERN_INFO "pci_find_subsys() called while pci_devices "
-				"is still empty\n");
+	if (unlikely(list_empty(&pci_devices)))
 		return NULL;
-	}
 	down_read(&pci_bus_sem);
 	n = from ? from->global_list.next : pci_devices.next;
 
@@ -278,11 +275,8 @@ pci_get_subsys(unsigned int vendor, unsigned int device,
 	 * can cause some machines to crash.  So here we detect and flag that
 	 * situation and bail out early.
 	 */
-	if (unlikely(list_empty(&pci_devices))) {
-		printk(KERN_NOTICE "pci_get_subsys() called while pci_devices "
-				"is still empty\n");
+	if (unlikely(list_empty(&pci_devices)))
 		return NULL;
-	}
 	down_read(&pci_bus_sem);
 	n = from ? from->global_list.next : pci_devices.next;
 

fs/nfsd/nfsfh.c

@@ -269,7 +269,7 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access)
 			"acc=%x, error=%d\n",
 			dentry->d_parent->d_name.name,
 			dentry->d_name.name,
-			access, (error >> 24));
+			access, ntohl(error));
 	}
 out:
 	if (exp && !IS_ERR(exp))

fs/proc/base.c

@@ -2328,13 +2328,23 @@ static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldi
 {
 	struct dentry *dentry = filp->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
-	struct task_struct *leader = get_proc_task(inode);
+	struct task_struct *leader = NULL;
 	struct task_struct *task;
 	int retval = -ENOENT;
 	ino_t ino;
 	int tid;
 	unsigned long pos = filp->f_pos;  /* avoiding "long long" filp->f_pos */
 
+	task = get_proc_task(inode);
+	if (!task)
+		goto out_no_task;
+	rcu_read_lock();
+	if (pid_alive(task)) {
+		leader = task->group_leader;
+		get_task_struct(leader);
+	}
+	rcu_read_unlock();
+	put_task_struct(task);
 	if (!leader)
 		goto out_no_task;
 	retval = 0;

include/asm-frv/Kbuild

 include include/asm-generic/Kbuild.asm
+
+header-y += registers.h
+
+unifdef-y += termios.h
+unifdef-y += ptrace.h
+unifdef-y += page.h

include/asm-frv/page.h

@@ -76,8 +76,6 @@ extern unsigned long max_pfn;
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
-
 #ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
 #define WANT_PAGE_VIRTUAL	1
 #endif
@@ -85,4 +83,6 @@ extern unsigned long max_pfn;
 #include <asm-generic/memory_model.h>
 #include <asm-generic/page.h>
 
+#endif /* __KERNEL__ */
+
 #endif /* _ASM_PAGE_H */

include/asm-frv/ptrace.h

@@ -12,9 +12,11 @@
 #define _ASM_PTRACE_H
 
 #include <asm/registers.h>
+#ifdef __KERNEL__
 #include <asm/irq_regs.h>
 
 #define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
+#endif
 
 
 #define PT_PSR		0
@@ -60,6 +62,7 @@
 #define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
 #define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
 
+#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 /*
@@ -74,6 +77,7 @@ register struct pt_regs *__frame asm("gr28");
 extern unsigned long user_stack(const struct pt_regs *);
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) ((regs)->pc)
+#endif
 
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_PTRACE_H */

include/asm-frv/termios.h

@@ -69,6 +69,8 @@ struct termio {
 #define N_SYNC_PPP	14
 #define N_HCI		15  /* Bluetooth HCI UART */
 
+#ifdef __KERNEL__
 #include <asm-generic/termios.h>
+#endif
 
 #endif /* _ASM_TERMIOS_H */

include/asm-um/pgtable.h

@@ -408,6 +408,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 #include <asm-generic/pgtable-nopud.h>
 
+#ifdef CONFIG_HIGHMEM
+/* Clear a kernel PTE and flush it from the TLB */
+#define kpte_clear_flush(ptep, vaddr)					\
+do {									\
+	pte_clear(&init_mm, vaddr, ptep);				\
+	__flush_tlb_one(vaddr);						\
+} while (0)
+#endif
+
 #endif
 #endif
 

include/linux/efi.h

@@ -301,7 +301,7 @@ extern int __init efi_uart_console_only (void);
 extern void efi_initialize_iomem_resources(struct resource *code_resource,
 					struct resource *data_resource);
 extern unsigned long efi_get_time(void);
-extern int __init efi_set_rtc_mmss(unsigned long nowtime);
+extern int efi_set_rtc_mmss(unsigned long nowtime);
 extern int is_available_memory(efi_memory_desc_t * md);
 extern struct efi_memory_map memmap;
 

kernel/fork.c

@@ -1313,7 +1313,7 @@ noinline struct pt_regs * __devinit __attribute__((weak)) idle_regs(struct pt_re
 	return regs;
 }
 
-struct task_struct * __devinit fork_idle(int cpu)
+struct task_struct * __cpuinit fork_idle(int cpu)
 {
 	struct task_struct *task;
 	struct pt_regs regs;

mm/page_alloc.c

@@ -989,8 +989,7 @@ int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
 		      int classzone_idx, int alloc_flags)
 {
 	/* free_pages my go negative - that's OK */
-	unsigned long min = mark;
-	long free_pages = z->free_pages - (1 << order) + 1;
+	long min = mark, free_pages = z->free_pages - (1 << order) + 1;
 	int o;
 
 	if (alloc_flags & ALLOC_HIGH)

net/ipv4/netfilter/ip_conntrack_sip.c

@@ -283,10 +283,16 @@ static int skp_epaddr_len(const char *dptr, const char *limit, int *shift)
 {
 	int s = *shift;
 
-	for (; dptr <= limit && *dptr != '@'; dptr++)
+	/* Search for @, but stop at the end of the line.
+	 * We are inside a sip: URI, so we don't need to worry about
+	 * continuation lines. */
+	while (dptr <= limit &&
+	       *dptr != '@' && *dptr != '\r' && *dptr != '\n') {
 		(*shift)++;
+		dptr++;
+	}
 
-	if (*dptr == '@') {
+	if (dptr <= limit && *dptr == '@') {
 		dptr++;
 		(*shift)++;
 	} else

net/ipv6/addrconf.c

@@ -3393,7 +3393,7 @@ static void inline ipv6_store_devconf(struct ipv6_devconf *cnf,
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	array[DEVCONF_ACCEPT_RA_RTR_PREF] = cnf->accept_ra_rtr_pref;
 	array[DEVCONF_RTR_PROBE_INTERVAL] = cnf->rtr_probe_interval;
-#ifdef CONFIV_IPV6_ROUTE_INFO
+#ifdef CONFIG_IPV6_ROUTE_INFO
 	array[DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN] = cnf->accept_ra_rt_info_max_plen;
 #endif
 #endif
@@ -3898,7 +3898,7 @@ static struct addrconf_sysctl_table
 			.proc_handler	=	&proc_dointvec_jiffies,
 			.strategy	=	&sysctl_jiffies,
 		},
-#ifdef CONFIV_IPV6_ROUTE_INFO
+#ifdef CONFIG_IPV6_ROUTE_INFO
 		{
 			.ctl_name	=	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN,
 			.procname	=	"accept_ra_rt_info_max_plen",

net/ipv6/ndisc.c

@@ -1413,6 +1413,13 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
  		return;
  	}
 
+	if (!ipv6_addr_equal(&skb->nh.ipv6h->daddr, target) &&
+	    !(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+		ND_PRINTK2(KERN_WARNING
+			"ICMPv6 Redirect: target address is not link-local.\n");
+		return;
+	}
+
 	ndisc_flow_init(&fl, NDISC_REDIRECT, &saddr_buf, &skb->nh.ipv6h->saddr,
 			dev->ifindex);
 

net/netfilter/Kconfig

@@ -628,7 +628,7 @@ config NETFILTER_XT_MATCH_TCPMSS
 
 config NETFILTER_XT_MATCH_HASHLIMIT
 	tristate '"hashlimit" match support'
-	depends on NETFILTER_XTABLES
+	depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
 	help
 	  This option adds a `hashlimit' match.
 

net/netfilter/nf_conntrack_sip.c

@@ -303,10 +303,16 @@ static int skp_epaddr_len(struct nf_conn *ct, const char *dptr,
 {
 	int s = *shift;
 
-	for (; dptr <= limit && *dptr != '@'; dptr++)
+	/* Search for @, but stop at the end of the line.
+	 * We are inside a sip: URI, so we don't need to worry about
+	 * continuation lines. */
+	while (dptr <= limit &&
+	       *dptr != '@' && *dptr != '\r' && *dptr != '\n') {
 		(*shift)++;
+		dptr++;
+	}
 
-	if (*dptr == '@') {
+	if (dptr <= limit && *dptr == '@') {
 		dptr++;
 		(*shift)++;
 	} else

net/netfilter/xt_connbytes.c

@@ -52,6 +52,8 @@ match(const struct sk_buff *skb,
 {
 	const struct xt_connbytes_info *sinfo = matchinfo;
 	u_int64_t what = 0;	/* initialize to make gcc happy */
+	u_int64_t bytes = 0;
+	u_int64_t pkts = 0;
 	const struct ip_conntrack_counter *counters;
 
 	if (!(counters = nf_ct_get_counters(skb)))
@@ -89,29 +91,22 @@ match(const struct sk_buff *skb,
 	case XT_CONNBYTES_AVGPKT:
 		switch (sinfo->direction) {
 		case XT_CONNBYTES_DIR_ORIGINAL:
-			what = div64_64(counters[IP_CT_DIR_ORIGINAL].bytes,
-					counters[IP_CT_DIR_ORIGINAL].packets);
+			bytes = counters[IP_CT_DIR_ORIGINAL].bytes;
+			pkts  = counters[IP_CT_DIR_ORIGINAL].packets;
 			break;
 		case XT_CONNBYTES_DIR_REPLY:
-			what = div64_64(counters[IP_CT_DIR_REPLY].bytes,
-					counters[IP_CT_DIR_REPLY].packets);
+			bytes = counters[IP_CT_DIR_REPLY].bytes;
+			pkts  = counters[IP_CT_DIR_REPLY].packets;
 			break;
 		case XT_CONNBYTES_DIR_BOTH:
-			{
-				u_int64_t bytes;
-				u_int64_t pkts;
-				bytes = counters[IP_CT_DIR_ORIGINAL].bytes +
-					counters[IP_CT_DIR_REPLY].bytes;
-				pkts = counters[IP_CT_DIR_ORIGINAL].packets+
-					counters[IP_CT_DIR_REPLY].packets;
-
-				/* FIXME_THEORETICAL: what to do if sum
-				 * overflows ? */
-
-				what = div64_64(bytes, pkts);
-			}
+			bytes = counters[IP_CT_DIR_ORIGINAL].bytes +
+				counters[IP_CT_DIR_REPLY].bytes;
+			pkts  = counters[IP_CT_DIR_ORIGINAL].packets +
+				counters[IP_CT_DIR_REPLY].packets;
 			break;
 		}
+		if (pkts != 0)
+			what = div64_64(bytes, pkts);
 		break;
 	}
 

net/sctp/sm_sideeffect.c

@@ -621,7 +621,13 @@ static void sctp_cmd_transport_on(sctp_cmd_seq_t *cmds,
 	/* The receiver of the HEARTBEAT ACK should also perform an
 	 * RTT measurement for that destination transport address
 	 * using the time value carried in the HEARTBEAT ACK chunk.
+	 * If the transport's rto_pending variable has been cleared,
+	 * it was most likely due to a retransmit.  However, we want
+	 * to re-enable it to properly update the rto.
 	 */
+	if (t->rto_pending == 0)
+		t->rto_pending = 1;
+
 	hbinfo = (sctp_sender_hb_info_t *) chunk->skb->data;
 	sctp_transport_update_rto(t, (jiffies - hbinfo->sent_at));