dt-bindings: mmc: Convert sdhci-pxa to json-schema

Convert the sdhci-pxa binding to DT schema format using json-schema.

At the same time, fix a couple of issues with the examples discovered by
the validation tool -- a semicolon instead of a comma and wrong node names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200521091356.2211020-2-lkundrak@v3.skReviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Documentation/devicetree/bindings/mmc/sdhci-pxa.txt

-* Marvell sdhci-pxa v2/v3 controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-Required properties:
-- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
-  "marvell,armada-380-sdhci".
-- reg:
-  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
-    the SDHCI registers.
-
-  * for "marvell,armada-380-sdhci", three register areas. The first
-    one for the SDHCI registers themselves, the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
-    SDIO3 Configuration register
-- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
-  for "marvell,armada-380-sdhci"
-- clocks: Array of clocks required for SDHCI; requires at least one for
-    I/O clock.
-- clock-names: Array of names corresponding to clocks property; shall be
-    "io" for I/O clock and "core" for optional core clock.
-
-Optional properties:
-- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
-
-Example:
-
-sdhci@d4280800 {
-	compatible = "mrvl,pxav3-mmc";
-	reg = <0xd4280800 0x800>;
-	bus-width = <8>;
-	interrupts = <27>;
-	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
-	clock-names = "io", "core";
-	non-removable;
-	mrvl,clk-delay-cycles = <31>;
-};
-
-sdhci@d8000 {
-	compatible = "marvell,armada-380-sdhci";
-	reg-names = "sdhci", "mbus", "conf-sdio3";
-	reg = <0xd8000 0x1000>,
-		<0xdc000 0x100>;
-		<0x18454 0x4>;
-	interrupts = <0 25 0x4>;
-	clocks = <&gateclk 17>;
-	clock-names = "io";
-	mrvl,clk-delay-cycles = <0x1F>;
-};

Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA SDHCI v2/v3 bindings
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-380-sdhci
+    then:
+      properties:
+        regs:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+    else:
+      properties:
+        regs:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+properties:
+  compatible:
+    enum:
+      - mrvl,pxav2-mmc
+      - mrvl,pxav3-mmc
+      - marvell,armada-380-sdhci
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: sdhci
+      - const: mbus
+      - const: conf-sdio3
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: io
+      - const: core
+
+  mrvl,clk-delay-cycles:
+    description: Specify a number of cycles to delay for tuning.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/berlin2.h>
+    mmc@d4280800 {
+        compatible = "mrvl,pxav3-mmc";
+        reg = <0xd4280800 0x800>;
+        bus-width = <8>;
+        interrupts = <27>;
+        clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+        clock-names = "io", "core";
+        non-removable;
+        mrvl,clk-delay-cycles = <31>;
+    };
+  - |
+    mmc@d8000 {
+        compatible = "marvell,armada-380-sdhci";
+        reg-names = "sdhci", "mbus", "conf-sdio3";
+        reg = <0xd8000 0x1000>,
+              <0xdc000 0x100>,
+              <0x18454 0x4>;
+        interrupts = <0 25 0x4>;
+        clocks = <&gateclk 17>;
+        clock-names = "io";
+        mrvl,clk-delay-cycles = <0x1F>;
+    };
+
+...