dt-bindings: remoteproc: Add bindings for Davinci DSP processors

Add the device tree bindings document for the DSP processor
subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt

+TI Davinci DSP devices
+=======================
+
+Binding status: Unstable - Subject to changes for DT representation of clocks
+			   and resets
+
+The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
+is used to offload some of the processor-intensive tasks or algorithms, for
+achieving various system level goals.
+
+The processor cores in the sub-system usually contain additional sub-modules
+like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+controller, a dedicated local power/sleep controller etc. The DSP processor
+core used in Davinci SoCs is usually a C674x DSP CPU.
+
+DSP Device Node:
+================
+Each DSP Core sub-system is represented as a single DT node.
+
+Required properties:
+--------------------
+The following are the mandatory properties:
+
+- compatible:		Should be one of the following,
+			    "ti,da850-dsp" for DSPs on OMAP-L138 SoCs
+
+- reg:			Should contain an entry for each value in 'reg-names'.
+			Each entry should have the memory region's start address
+			and the size of the region, the representation matching
+			the parent node's '#address-cells' and '#size-cells' values.
+
+- reg-names:		Should contain strings with the following names, each
+			representing a specific internal memory region or a
+			specific register space,
+			     "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base"
+
+- interrupts: 		Should contain the interrupt number used to receive the
+			interrupts from the DSP. The value should follow the
+			interrupt-specifier format as dictated by the
+			'interrupt-parent' node.
+
+- memory-region:	phandle to the reserved memory node to be associated
+			with the remoteproc device. The reserved memory node
+			can be a CMA memory node, and should be defined as
+			per the bindings in
+			Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+Optional properties:
+--------------------
+- interrupt-parent:	phandle to the interrupt controller node. This property
+			is needed if the device node hierarchy doesn't have an
+			interrupt controller.
+
+
+Example:
+--------
+
+	/* DSP Reserved Memory node */
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@c3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xc3000000 0x1000000>;
+			reusable;
+		};
+	};
+
+	/* DSP node */
+	{
+		dsp: dsp@11800000 {
+			compatible = "ti,da850-dsp";
+			reg = <0x11800000 0x40000>,
+			      <0x11e00000 0x8000>,
+			      <0x11f00000 0x8000>,
+			      <0x01c14044 0x4>,
+			      <0x01c14174 0x8>;
+			reg-names = "l2sram", "l1pram", "l1dram", "host1cfg",
+				    "chipsig";
+			interrupt-parent = <&intc>;
+			interrupts = <28>;
+			memory-region = <&dsp_memory_region>;
+		};
+	};