USB: mos7840: fix port_probe flow

Remove temporary do-while(0) loop used to keep changes minimal.

Fixup indentation, remove some line breaks, and replace break with goto
to maintain flow.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/serial/mos7840.c

@@ -2340,10 +2340,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 
 	pnum = port->number - serial->minor;
 
-	/* FIXME: remove do-while(0) loop used to keep stable patch minimal.
-	 */
-	do {
-		dev_dbg(&port->dev, "mos7840_startup: configuring port %d............\n", pnum);
+	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
 	mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 	if (mos7840_port == NULL) {
 		dev_err(&port->dev, "%s - Out of memory\n", __func__);
@@ -2371,23 +2368,19 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 		mos7840_port->SpRegOffset = 0x0;
 		mos7840_port->ControlRegOffset = 0x1;
 		mos7840_port->DcrRegOffset = 0x4;
-		} else if ((mos7840_port->port_num == 2)
-			   && (serial->num_ports == 4)) {
+	} else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
 		mos7840_port->SpRegOffset = 0x8;
 		mos7840_port->ControlRegOffset = 0x9;
 		mos7840_port->DcrRegOffset = 0x16;
-		} else if ((mos7840_port->port_num == 2)
-			   && (serial->num_ports == 2)) {
+	} else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
 		mos7840_port->SpRegOffset = 0xa;
 		mos7840_port->ControlRegOffset = 0xb;
 		mos7840_port->DcrRegOffset = 0x19;
-		} else if ((mos7840_port->port_num == 3)
-			   && (serial->num_ports == 4)) {
+	} else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
 		mos7840_port->SpRegOffset = 0xa;
 		mos7840_port->ControlRegOffset = 0xb;
 		mos7840_port->DcrRegOffset = 0x19;
-		} else if ((mos7840_port->port_num == 4)
-			   && (serial->num_ports == 4)) {
+	} else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
 		mos7840_port->SpRegOffset = 0xc;
 		mos7840_port->ControlRegOffset = 0xd;
 		mos7840_port->DcrRegOffset = 0x1c;
@@ -2400,7 +2393,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			mos7840_port->ControlRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
 	Data |= 0x08;	/* setting driver done bit */
@@ -2412,7 +2405,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
 
@@ -2423,7 +2416,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 0), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
 
@@ -2432,7 +2425,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 1), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
 
@@ -2441,23 +2434,21 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 2), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
 
 	/* write values in clkstart0x0 and clkmulti 0x20 */
 	Data = 0x0;
-		status = mos7840_set_reg_sync(port,
-					 CLK_START_VALUE_REGISTER, Data);
+	status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
 	Data = 0x20;
-		status = mos7840_set_reg_sync(port,
-					CLK_MULTI_REGISTER, Data);
+	status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
 		goto error;
@@ -2466,18 +2457,15 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 
 	/* write value 0x0 to scratchpad register */
 	Data = 0x00;
-		status = mos7840_set_uart_reg(port,
-						SCRATCH_PAD_REGISTER, Data);
+	status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
-			break;
+		goto out;
 	} else
 		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
 
 	/* Zero Length flag register */
-		if ((mos7840_port->port_num != 1)
-		    && (serial->num_ports == 2)) {
-
+	if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
 		Data = 0xff;
 		status = mos7840_set_reg_sync(port,
 				(__u16) (ZLP_REG1 +
@@ -2486,7 +2474,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
 		if (status < 0) {
 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
-				break;
+			goto out;
 		} else
 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
 	} else {
@@ -2498,7 +2486,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
 		if (status < 0) {
 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
-				break;
+			goto out;
 		} else
 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
 
@@ -2523,25 +2511,20 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 		mos7840_port->led_timer1.function = mos7840_led_off;
 		mos7840_port->led_timer1.expires =
 			jiffies + msecs_to_jiffies(LED_ON_MS);
-			mos7840_port->led_timer1.data =
-						(unsigned long)mos7840_port;
+		mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
 
 		init_timer(&mos7840_port->led_timer2);
-			mos7840_port->led_timer2.function =
-						mos7840_led_flag_off;
+		mos7840_port->led_timer2.function = mos7840_led_flag_off;
 		mos7840_port->led_timer2.expires =
 			jiffies + msecs_to_jiffies(LED_OFF_MS);
-			mos7840_port->led_timer2.data =
-						(unsigned long)mos7840_port;
+		mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
 
 		mos7840_port->led_flag = false;
 
 		/* Turn off LED */
-			mos7840_set_led_sync(port,
-						MODEM_CONTROL_REGISTER, 0x0300);
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
 	}
-	} while (0);
-
+out:
 	if (pnum == serial->num_ports - 1) {
 		/* Zero Length flag enable */
 		Data = 0x0f;