regulator: da903x: Use DIV_ROUND_UP macro to calculate selector

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/da903x.c

@@ -119,7 +119,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -202,7 +202,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -233,10 +233,10 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
 
 	thresh = (info->max_uV + info->min_uV) / 2;
 	if (min_uV < thresh) {
-		val = (thresh - min_uV + info->step_uV - 1) / info->step_uV;
+		val = DIV_ROUND_UP(thresh - min_uV, info->step_uV);
 		val |= 0x4;
 	} else {
-		val = (min_uV - thresh + info->step_uV - 1) / info->step_uV;
+		val = DIV_ROUND_UP(min_uV - thresh, info->step_uV);
 	}
 
 	*selector = val;
@@ -281,7 +281,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -307,7 +307,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val);
 	*selector = val;
 	val <<= info->vol_shift;