Skip to content

L
linux
Commit ae7bd9cc authored by Matthieu Baerts's avatar Matthieu Baerts Committed by Jakub Kicinski
Browse files
Options

selftests: mptcp: join: option to execute specific tests 

Often, it is needed to run one specific test.

There are options to run subgroups of tests but when only one fails, no
need to run all the subgroup. So far, the solution was to edit the
script to comment the tests that are not needed but that's not ideal.

Now, it is possible to run one specific test by giving the ID of the
tests that are going to be validated, e.g.

  ./mptcp_join.sh 36 37

This is cleaner and saves time.

Technically, the reset* functions now return 0 if the test can be
executed. This naturally creates sections per test in the code which is
also helpful to understand what a test is exactly doing.
Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent e59300ce
Hide whitespace changes
Inline Side-by-side
Showing with 877 additions and 752 deletions
tools/testing/selftests/net/mptcp/mptcp_join.sh
View file @ ae7bd9cc
......@@ -20,6 +20,7 @@ validate_checksum=0
init=0
declare -A all_tests
declare -a only_tests
TEST_COUNT=0
nr_blank=40
......@@ -149,8 +150,30 @@ cleanup()
cleanup_partial
}
skip_test()
{
if [ "${#only_tests[@]}" -eq 0 ]; then
return 1
fi
local i
for i in "${only_tests[@]}"; do
if [ "${TEST_COUNT}" -eq "${i}" ]; then
return 1
fi
done
return 0
}
reset()
{
TEST_COUNT=$((TEST_COUNT+1))
if skip_test; then
return 1
fi
if [ "${init}" != "1" ]; then
init
else
......@@ -158,11 +181,13 @@ reset()
fi
init_partial
return 0
}
reset_with_cookies()
{
reset
reset || return 1
for netns in "$ns1" "$ns2";do
ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2
......@@ -179,7 +204,7 @@ reset_with_add_addr_timeout()
tables="ip6tables"
fi
reset
reset || return 1
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
ip netns exec $ns2 $tables -A OUTPUT -p tcp \
......@@ -194,7 +219,7 @@ reset_with_checksum()
local ns1_enable=$1
local ns2_enable=$2
reset
reset || return 1
ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=$ns1_enable
ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=$ns2_enable
......@@ -207,7 +232,7 @@ reset_with_allow_join_id0()
local ns1_enable=$1
local ns2_enable=$2
reset
reset || return 1
ip netns exec $ns1 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns1_enable
ip netns exec $ns2 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns2_enable
......@@ -520,8 +545,7 @@ do_transfer()
speed="$9"
sflags="${10}"
port=$((10000+$TEST_COUNT))
TEST_COUNT=$((TEST_COUNT+1))
port=$((10000+$TEST_COUNT-1))
:> "$cout"
:> "$sout"
......@@ -1381,888 +1405,968 @@ wait_attempt_fail()
subflows_tests()
{
reset
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN" "0" "0" "0"
if reset; then
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN" 0 0 0
fi
# subflow limited by client
reset
pm_nl_set_limits $ns1 0 0
pm_nl_set_limits $ns2 0 0
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by client" 0 0 0
if reset; then
pm_nl_set_limits $ns1 0 0
pm_nl_set_limits $ns2 0 0
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by client" 0 0 0
fi
# subflow limited by server
reset
pm_nl_set_limits $ns1 0 0
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by server" 1 1 0
if reset; then
pm_nl_set_limits $ns1 0 0
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by server" 1 1 0
fi
# subflow
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow" 1 1 1
fi
# multiple subflows
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows" 2 2 2
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows" 2 2 2
fi
# multiple subflows limited by server
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows, limited by server" 2 2 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows, limited by server" 2 2 1
fi
# single subflow, dev
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, dev" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, dev" 1 1 1
fi
}
subflows_error_tests()
{
# If a single subflow is configured, and matches the MPC src
# address, no additional subflow should be created
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "no MPC reuse with single endpoint" 0 0 0
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "no MPC reuse with single endpoint" 0 0 0
fi
# multiple subflows, with subflow creation error
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with failing subflow" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with failing subflow" 1 1 1
fi
# multiple subflows, with subflow timeout on MPJ
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with subflow timeout" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with subflow timeout" 1 1 1
fi
# multiple subflows, check that the endpoint corresponding to
# closed subflow (due to reset) is not reused if additional
# subflows are added later
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
# updates in the child shell do not have any effect here, we
# need to bump the test counter for the above case
TEST_COUNT=$((TEST_COUNT+1))
# mpj subflow will be in TW after the reset
wait_attempt_fail $ns2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
wait
# additional subflow could be created only if the PM select
# the later endpoint, skipping the already used one
chk_join_nr "multi subflows, fair usage on close" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
# mpj subflow will be in TW after the reset
wait_attempt_fail $ns2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
wait
# additional subflow could be created only if the PM select
# the later endpoint, skipping the already used one
chk_join_nr "multi subflows, fair usage on close" 1 1 1
fi
}
signal_address_tests()
{
# add_address, unused
reset
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "unused signal address" 0 0 0
chk_add_nr 1 1
if reset; then
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "unused signal address" 0 0 0
chk_add_nr 1 1
fi
# accept and use add_addr
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address" 1 1 1
chk_add_nr 1 1
fi
# accept and use add_addr with an additional subflow
# note: signal address in server ns and local addresses in client ns must
# belong to different subnets or one of the listed local address could be
# used for 'add_addr' subflow
reset
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal" 2 2 2
chk_add_nr 1 1
if reset; then
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal" 2 2 2
chk_add_nr 1 1
fi
# accept and use add_addr with additional subflows
reset
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows and signal" 3 3 3
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows and signal" 3 3 3
chk_add_nr 1 1
fi
# signal addresses
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal addresses" 3 3 3
chk_add_nr 3 3
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal addresses" 3 3 3
chk_add_nr 3 3
fi
# signal invalid addresses
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal invalid addresses" 1 1 1
chk_add_nr 3 3
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal invalid addresses" 1 1 1
chk_add_nr 3 3
fi
# signal addresses race test
reset
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_add_endpoint $ns2 10.0.1.2 flags signal
pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags signal
pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
# the peer could possibly miss some addr notification, allow retransmission
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal addresses race test" 3 3 3
# the server will not signal the address terminating
# the MPC subflow
chk_add_nr 3 3
if reset; then
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_add_endpoint $ns2 10.0.1.2 flags signal
pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags signal
pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
# the peer could possibly miss some addr notification, allow retransmission
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal addresses race test" 3 3 3
# the server will not signal the address terminating
# the MPC subflow
chk_add_nr 3 3
fi
}
link_failure_tests()
{
# accept and use add_addr with additional subflows and link loss
reset
# without any b/w limit each veth could spool the packets and get
# them acked at xmit time, so that the corresponding subflow will
# have almost always no outstanding pkts, the scheduler will pick
# always the first subflow and we will have hard time testing
# active backup and link switch-over.
# Let's set some arbitrary (low) virtual link limits.
init_shapers
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "multiple flows, signal, link failure" 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 5 1
if reset; then
# without any b/w limit each veth could spool the packets and get
# them acked at xmit time, so that the corresponding subflow will
# have almost always no outstanding pkts, the scheduler will pick
# always the first subflow and we will have hard time testing
# active backup and link switch-over.
# Let's set some arbitrary (low) virtual link limits.
init_shapers
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "multiple flows, signal, link failure" 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 5 1
fi
# accept and use add_addr with additional subflows and link loss
# for bidirectional transfer
reset
init_shapers
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 1
if reset; then
init_shapers
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 1
fi
# 2 subflows plus 1 backup subflow with a lossy link, backup
# will never be used
reset
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
FAILING_LINKS="1"
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup subflow unused, link failure" 2 2 2
chk_add_nr 1 1
chk_link_usage $ns2 ns2eth3 $cinsent 0
if reset; then
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
FAILING_LINKS="1"
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup subflow unused, link failure" 2 2 2
chk_add_nr 1 1
chk_link_usage $ns2 ns2eth3 $cinsent 0
fi
# 2 lossy links after half transfer, backup will get half of
# the traffic
reset
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
FAILING_LINKS="1 2"
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup flow used, multi links fail" 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 2 4 2
chk_link_usage $ns2 ns2eth3 $cinsent 50
if reset; then
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
FAILING_LINKS="1 2"
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup flow used, multi links fail" 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 2 4 2
chk_link_usage $ns2 ns2eth3 $cinsent 50
fi
# use a backup subflow with the first subflow on a lossy link
# for bidirectional transfer
reset
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
FAILING_LINKS="1 2"
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "backup flow used, bidi, link failure" 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 2
chk_link_usage $ns2 ns2eth3 $cinsent 50
if reset; then
init_shapers
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
FAILING_LINKS="1 2"
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "backup flow used, bidi, link failure" 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 2
chk_link_usage $ns2 ns2eth3 $cinsent 50
fi
}
add_addr_timeout_tests()
{
# add_addr timeout
reset_with_add_addr_timeout
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
chk_add_nr 4 0
if reset_with_add_addr_timeout; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
chk_add_nr 4 0
fi
# add_addr timeout IPv6
reset_with_add_addr_timeout 6
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
chk_add_nr 4 0
if reset_with_add_addr_timeout 6; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
chk_add_nr 4 0
fi
# signal addresses timeout
reset_with_add_addr_timeout
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2
chk_add_nr 8 0
if reset_with_add_addr_timeout; then
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2
chk_add_nr 8 0
fi
# signal invalid addresses timeout
reset_with_add_addr_timeout
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1
chk_add_nr 8 0
if reset_with_add_addr_timeout; then
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1
chk_add_nr 8 0
fi
}
remove_tests()
{
# single subflow, remove
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
chk_join_nr "remove single subflow" 1 1 1
chk_rm_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
chk_join_nr "remove single subflow" 1 1 1
chk_rm_nr 1 1
fi
# multiple subflows, remove
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
chk_join_nr "remove multiple subflows" 2 2 2
chk_rm_nr 2 2
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
chk_join_nr "remove multiple subflows" 2 2 2
chk_rm_nr 2 2
fi
# single address, remove
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
fi
# subflow and signal, remove
reset
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
fi
# subflows and signal, remove
reset
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
if reset; then
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
fi
# addresses remove
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove addresses" 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove addresses" 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert
fi
# invalid addresses remove
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove invalid addresses" 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove invalid addresses" 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
fi
# subflows and signal, flush
reset
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
if reset; then
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
fi
# subflows flush
reset
pm_nl_set_limits $ns1 3 3
pm_nl_set_limits $ns2 3 3
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows" 3 3 3
chk_rm_nr 0 3 simult
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_set_limits $ns2 3 3
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows" 3 3 3
chk_rm_nr 0 3 simult
fi
# addresses flush
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush addresses" 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert simult
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush addresses" 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert simult
fi
# invalid addresses flush
reset
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
chk_join_nr "flush invalid addresses" 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
if reset; then
pm_nl_set_limits $ns1 3 3
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
chk_join_nr "flush invalid addresses" 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
fi
# remove id 0 subflow
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
chk_join_nr "remove id 0 subflow" 1 1 1
chk_rm_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
chk_join_nr "remove id 0 subflow" 1 1 1
chk_rm_nr 1 1
fi
# remove id 0 address
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
chk_join_nr "remove id 0 address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
chk_join_nr "remove id 0 address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
fi
}
add_tests()
{
# add single subflow
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
chk_join_nr "add single subflow" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
chk_join_nr "add single subflow" 1 1 1
fi
# add signal address
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "add signal address" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "add signal address" 1 1 1
chk_add_nr 1 1
fi
# add multiple subflows
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
chk_join_nr "add multiple subflows" 2 2 2
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
chk_join_nr "add multiple subflows" 2 2 2
fi
# add multiple subflows IPv6
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
chk_join_nr "add multiple subflows IPv6" 2 2 2
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
chk_join_nr "add multiple subflows IPv6" 2 2 2
fi
# add multiple addresses IPv6
reset
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
chk_join_nr "add multiple addresses IPv6" 2 2 2
chk_add_nr 2 2
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
chk_join_nr "add multiple addresses IPv6" 2 2 2
chk_add_nr 2 2
fi
}
ipv6_tests()
{
# subflow IPv6
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single subflow IPv6" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single subflow IPv6" 1 1 1
fi
# add_address, unused IPv6
reset
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "unused signal address IPv6" 0 0 0
chk_add_nr 1 1
if reset; then
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "unused signal address IPv6" 0 0 0
chk_add_nr 1 1
fi
# signal address IPv6
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single address IPv6" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single address IPv6" 1 1 1
chk_add_nr 1 1
fi
# single address IPv6, remove
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
chk_join_nr "remove single address IPv6" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
chk_join_nr "remove single address IPv6" 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
fi
# subflow and signal IPv6, remove
reset
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
chk_join_nr "remove subflow and signal IPv6" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
chk_join_nr "remove subflow and signal IPv6" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
fi
}
v4mapped_tests()
{
# subflow IPv4-mapped to IPv4-mapped
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow IPv4-mapped" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow IPv4-mapped" 1 1 1
fi
# signal address IPv4-mapped with IPv4-mapped sk
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address IPv4-mapped" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address IPv4-mapped" 1 1 1
chk_add_nr 1 1
fi
# subflow v4-map-v6
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow v4-map-v6" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow v4-map-v6" 1 1 1
fi
# signal address v4-map-v6
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address v4-map-v6" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address v4-map-v6" 1 1 1
chk_add_nr 1 1
fi
# subflow v6-map-v4
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow v6-map-v4" 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow v6-map-v4" 1 1 1
fi
# signal address v6-map-v4
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address v6-map-v4" 1 1 1
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address v6-map-v4" 1 1 1
chk_add_nr 1 1
fi
# no subflow IPv6 to v4 address
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6" 0 0 0
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6" 0 0 0
fi
# no subflow IPv6 to v4 address even if v6 has a valid v4 at the end
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0
fi
# no subflow IPv4 to v6 address, no need to slow down too then
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr "no JOIN with diff families v6-v4" 0 0 0
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr "no JOIN with diff families v6-v4" 0 0 0
fi
}
backup_tests()
{
# single subflow, backup
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
chk_join_nr "single subflow, backup" 1 1 1
chk_prio_nr 0 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
chk_join_nr "single subflow, backup" 1 1 1
chk_prio_nr 0 1
fi
# single address, backup
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address, backup" 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address, backup" 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
fi
# single address with port, backup
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address with port, backup" 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address with port, backup" 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
fi
}
add_addr_ports_tests()
{
# signal address with port
reset
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with port" 1 1 1
chk_add_nr 1 1 1
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with port" 1 1 1
chk_add_nr 1 1 1
fi
# subflow and signal with port
reset
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
if reset; then
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
fi
# single address with port, remove
reset
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address with port" 1 1 1
chk_add_nr 1 1 1
chk_rm_nr 1 1 invert
if reset; then
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address with port" 1 1 1
chk_add_nr 1 1 1
chk_rm_nr 1 1 invert
fi
# subflow and signal with port, remove
reset
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
chk_rm_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
chk_rm_nr 1 1
fi
# subflows and signal with port, flush
reset
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow
chk_join_nr "flush subflows and signal with port" 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
if reset; then
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow
chk_join_nr "flush subflows and signal with port" 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
fi
# multiple addresses with port
reset
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with port" 2 2 2
chk_add_nr 2 2 2
if reset; then
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with port" 2 2 2
chk_add_nr 2 2 2
fi
# multiple addresses with ports
reset
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with ports" 2 2 2
chk_add_nr 2 2 2
if reset; then
pm_nl_set_limits $ns1 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101
pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with ports" 2 2 2
chk_add_nr 2 2 2
fi
}
syncookies_tests()
{
# single subflow, syncookies
reset_with_cookies
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow with syn cookies" 1 1 1
if reset_with_cookies; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow with syn cookies" 1 1 1
fi
# multiple subflows with syn cookies
reset_with_cookies
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows with syn cookies" 2 2 2
if reset_with_cookies; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows with syn cookies" 2 2 2
fi
# multiple subflows limited by server
reset_with_cookies
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows limited by server w cookies" 2 1 1
if reset_with_cookies; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows limited by server w cookies" 2 1 1
fi
# test signal address with cookies
reset_with_cookies
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with syn cookies" 1 1 1
chk_add_nr 1 1
if reset_with_cookies; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with syn cookies" 1 1 1
chk_add_nr 1 1
fi
# test cookie with subflow and signal
reset_with_cookies
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal w cookies" 2 2 2
chk_add_nr 1 1
if reset_with_cookies; then
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal w cookies" 2 2 2
chk_add_nr 1 1
fi
# accept and use add_addr with additional subflows
reset_with_cookies
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows and signal w. cookies" 3 3 3
chk_add_nr 1 1
if reset_with_cookies; then
pm_nl_set_limits $ns1 0 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows and signal w. cookies" 3 3 3
chk_add_nr 1 1
fi
}
checksum_tests()
{
# checksum test 0 0
reset_with_checksum 0 0
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 0 0" 0 0 0
if reset_with_checksum 0 0; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 0 0" 0 0 0
fi
# checksum test 1 1
reset_with_checksum 1 1
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 1 1" 0 0 0
if reset_with_checksum 1 1; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 1 1" 0 0 0
fi
# checksum test 0 1
reset_with_checksum 0 1
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 0 1" 0 0 0
if reset_with_checksum 0 1; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 0 1" 0 0 0
fi
# checksum test 1 0
reset_with_checksum 1 0
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 1 0" 0 0 0
if reset_with_checksum 1 0; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "checksum test 1 0" 0 0 0
fi
}
deny_join_id0_tests()
{
# subflow allow join id0 ns1
reset_with_allow_join_id0 1 0
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns1" 1 1 1
if reset_with_allow_join_id0 1 0; then
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns1" 1 1 1
fi
# subflow allow join id0 ns2
reset_with_allow_join_id0 0 1
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns2" 0 0 0
if reset_with_allow_join_id0 0 1; then
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns2" 0 0 0
fi
# signal address allow join id0 ns1
# ADD_ADDRs are not affected by allow_join_id0 value.
reset_with_allow_join_id0 1 0
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns1" 1 1 1
chk_add_nr 1 1
if reset_with_allow_join_id0 1 0; then
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns1" 1 1 1
chk_add_nr 1 1
fi
# signal address allow join id0 ns2
# ADD_ADDRs are not affected by allow_join_id0 value.
reset_with_allow_join_id0 0 1
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns2" 1 1 1
chk_add_nr 1 1
if reset_with_allow_join_id0 0 1; then
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns2" 1 1 1
chk_add_nr 1 1
fi
# subflow and address allow join id0 ns1
reset_with_allow_join_id0 1 0
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 1" 2 2 2
if reset_with_allow_join_id0 1 0; then
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 1" 2 2 2
fi
# subflow and address allow join id0 ns2
reset_with_allow_join_id0 0 1
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 2" 1 1 1
if reset_with_allow_join_id0 0 1; then
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 2" 1 1 1
fi
}
fullmesh_tests()
......@@ -2270,119 +2374,128 @@ fullmesh_tests()
# fullmesh 1
# 2 fullmesh addrs in ns2, added before the connection,
# 1 non-fullmesh addr in ns1, added during the connection.
reset
pm_nl_set_limits $ns1 0 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "fullmesh test 2x1" 4 4 4
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 0 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "fullmesh test 2x1" 4 4 4
chk_add_nr 1 1
fi
# fullmesh 2
# 1 non-fullmesh addr in ns1, added before the connection,
# 1 fullmesh addr in ns2, added during the connection.
reset
pm_nl_set_limits $ns1 1 3
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow
chk_join_nr "fullmesh test 1x1" 3 3 3
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 1 3
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow
chk_join_nr "fullmesh test 1x1" 3 3 3
chk_add_nr 1 1
fi
# fullmesh 3
# 1 non-fullmesh addr in ns1, added before the connection,
# 2 fullmesh addrs in ns2, added during the connection.
reset
pm_nl_set_limits $ns1 2 5
pm_nl_set_limits $ns2 1 5
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2" 5 5 5
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 2 5
pm_nl_set_limits $ns2 1 5
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2" 5 5 5
chk_add_nr 1 1
fi
# fullmesh 4
# 1 non-fullmesh addr in ns1, added before the connection,
# 2 fullmesh addrs in ns2, added during the connection,
# limit max_subflows to 4.
reset
pm_nl_set_limits $ns1 2 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2, limited" 4 4 4
chk_add_nr 1 1
if reset; then
pm_nl_set_limits $ns1 2 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2, limited" 4 4 4
chk_add_nr 1 1
fi
# set fullmesh flag
reset
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh
chk_join_nr "set fullmesh flag test" 2 2 2
chk_rm_nr 0 1
if reset; then
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh
chk_join_nr "set fullmesh flag test" 2 2 2
chk_rm_nr 0 1
fi
# set nofullmesh flag
reset
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh
chk_join_nr "set nofullmesh flag test" 2 2 2
chk_rm_nr 0 1
if reset; then
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh
chk_join_nr "set nofullmesh flag test" 2 2 2
chk_rm_nr 0 1
fi
# set backup,fullmesh flags
reset
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow backup,fullmesh
chk_join_nr "set backup,fullmesh flags test" 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
if reset; then
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow backup,fullmesh
chk_join_nr "set backup,fullmesh flags test" 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
fi
# set nobackup,nofullmesh flags
reset
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup,nofullmesh
chk_join_nr "set nobackup,nofullmesh flags test" 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
if reset; then
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup,nofullmesh
chk_join_nr "set nobackup,nofullmesh flags test" 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
fi
}
fastclose_tests()
{
reset
run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_2
chk_join_nr "fastclose test" 0 0 0
chk_fclose_nr 1 1
chk_rst_nr 1 1 invert
if reset; then
run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_2
chk_join_nr "fastclose test" 0 0 0
chk_fclose_nr 1 1
chk_rst_nr 1 1 invert
fi
}
implicit_tests()
{
# userspace pm type prevents add_addr
reset
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
wait_mpj $ns1
TEST_COUNT=$((TEST_COUNT + 1))
pm_nl_check_endpoint "implicit EP" "creation" \
$ns2 10.0.2.2 id 1 flags implicit
pm_nl_add_endpoint $ns2 10.0.2.2 id 33
pm_nl_check_endpoint "" "ID change is prevented" \
$ns2 10.0.2.2 id 1 flags implicit
pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
pm_nl_check_endpoint "" "modif is allowed" \
$ns2 10.0.2.2 id 1 flags signal
wait
if reset; then
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
wait_mpj $ns1
pm_nl_check_endpoint "implicit EP" "creation" \
$ns2 10.0.2.2 id 1 flags implicit
pm_nl_add_endpoint $ns2 10.0.2.2 id 33
pm_nl_check_endpoint "" "ID change is prevented" \
$ns2 10.0.2.2 id 1 flags implicit
pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
pm_nl_check_endpoint "" "modif is allowed" \
$ns2 10.0.2.2 id 1 flags signal
wait
fi
}
# [$1: error message]
......@@ -2405,6 +2518,8 @@ usage()
echo " -i use ip mptcp"
echo " -h help"
echo "[test ids]"
exit ${ret}
}
......@@ -2465,6 +2580,16 @@ while getopts "${all_tests_args}cCih" opt; do
esac
done
shift $((OPTIND - 1))
for arg in "${@}"; do
if [[ "${arg}" =~ ^[0-9]+$ ]]; then
only_tests+=("${arg}")
else
usage "Unknown argument: ${arg}"
fi
done
if [ ${#tests[@]} -eq 0 ]; then
tests=("${all_tests_names[@]}")
fi
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7