Commit ae84dbf7 authored by Tony Nguyen's avatar Tony Nguyen Committed by Jeff Kirsher

ixgbe: Do not support flow control autonegotiation for X553

Flow control autonegotiation is not supported for fiber on X553.  Add
device ID checks in ixgbe_device_supports_autoneg_fc() to return the
appropriate value.
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: default avatarEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 48301cf2
...@@ -79,6 +79,13 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) ...@@ -79,6 +79,13 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
switch (hw->phy.media_type) { switch (hw->phy.media_type) {
case ixgbe_media_type_fiber: case ixgbe_media_type_fiber:
/* flow control autoneg black list */
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_A_SFP:
case IXGBE_DEV_ID_X550EM_A_SFP_N:
supported = false;
break;
default:
hw->mac.ops.check_link(hw, &speed, &link_up, false); hw->mac.ops.check_link(hw, &speed, &link_up, false);
/* if link is down, assume supported */ /* if link is down, assume supported */
if (link_up) if (link_up)
...@@ -86,6 +93,8 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) ...@@ -86,6 +93,8 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
true : false; true : false;
else else
supported = true; supported = true;
}
break; break;
case ixgbe_media_type_backplane: case ixgbe_media_type_backplane:
supported = true; supported = true;
...@@ -111,6 +120,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) ...@@ -111,6 +120,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
break; break;
} }
if (!supported)
hw_dbg(hw, "Device %x does not support flow control autoneg\n",
hw->device_id);
return supported; return supported;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment