Commit aebdc8ab authored by Maxime Ripard's avatar Maxime Ripard Committed by Linus Walleij

pinctrl: sunxi: Implement multiple interrupt banks support

The A23 and A31 support multiple interrupt banks. Support it by adding a linear
domain covering all the banks. It's trickier than it should because there's an
interrupt per bank, so we have multiple interrupts using the same domain.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent c11a33c1
......@@ -636,17 +636,28 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
unsigned long bank, reg, val;
for (bank = 0; bank < pctl->desc->irq_banks; bank++)
if (irq == pctl->irq[bank])
break;
if (bank == pctl->desc->irq_banks)
return;
reg = sunxi_irq_status_reg_from_bank(bank);
val = readl(pctl->membase + reg);
/* Clear all interrupts */
writel(reg, pctl->membase + IRQ_STATUS_REG);
writel(val, pctl->membase + reg);
if (reg) {
if (val) {
int irqoffset;
chained_irq_enter(chip, desc);
for_each_set_bit(irqoffset, &reg, SUNXI_IRQ_NUMBER) {
int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
for_each_set_bit(irqoffset, &val, IRQ_PER_BANK) {
int pin_irq = irq_find_mapping(pctl->domain,
bank * IRQ_PER_BANK + irqoffset);
generic_handle_irq(pin_irq);
}
chained_irq_exit(chip, desc);
......@@ -714,8 +725,11 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
while (func->name) {
/* Create interrupt mapping while we're at it */
if (!strcmp(func->name, "irq"))
pctl->irq_array[func->irqnum] = pin->pin.number;
if (!strcmp(func->name, "irq")) {
int irqnum = func->irqnum + func->irqbank * IRQ_PER_BANK;
pctl->irq_array[irqnum] = pin->pin.number;
}
sunxi_pinctrl_add_function(pctl, func->name);
func++;
}
......@@ -785,6 +799,13 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
pctl->dev = &pdev->dev;
pctl->desc = desc;
pctl->irq_array = devm_kcalloc(&pdev->dev,
IRQ_PER_BANK * pctl->desc->irq_banks,
sizeof(*pctl->irq_array),
GFP_KERNEL);
if (!pctl->irq_array)
return -ENOMEM;
ret = sunxi_pinctrl_build_state(pdev);
if (ret) {
dev_err(&pdev->dev, "dt probe failed: %d\n", ret);
......@@ -869,21 +890,34 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
if (ret)
goto gpiochip_error;
pctl->irq = irq_of_parse_and_map(node, 0);
pctl->irq = devm_kcalloc(&pdev->dev,
pctl->desc->irq_banks,
sizeof(*pctl->irq),
GFP_KERNEL);
if (!pctl->irq) {
ret = -EINVAL;
ret = -ENOMEM;
goto clk_error;
}
pctl->domain = irq_domain_add_linear(node, SUNXI_IRQ_NUMBER,
&irq_domain_simple_ops, NULL);
for (i = 0; i < pctl->desc->irq_banks; i++) {
pctl->irq[i] = platform_get_irq(pdev, i);
if (pctl->irq[i] < 0) {
ret = pctl->irq[i];
goto clk_error;
}
}
pctl->domain = irq_domain_add_linear(node,
pctl->desc->irq_banks * IRQ_PER_BANK,
&irq_domain_simple_ops,
NULL);
if (!pctl->domain) {
dev_err(&pdev->dev, "Couldn't register IRQ domain\n");
ret = -ENOMEM;
goto clk_error;
}
for (i = 0; i < SUNXI_IRQ_NUMBER; i++) {
for (i = 0; i < (pctl->desc->irq_banks * IRQ_PER_BANK); i++) {
int irqno = irq_create_mapping(pctl->domain, i);
irq_set_chip_and_handler(irqno, &sunxi_pinctrl_irq_chip,
......@@ -891,8 +925,11 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
irq_set_chip_data(irqno, pctl);
};
irq_set_chained_handler(pctl->irq, sunxi_pinctrl_irq_handler);
irq_set_handler_data(pctl->irq, pctl);
for (i = 0; i < pctl->desc->irq_banks; i++) {
irq_set_chained_handler(pctl->irq[i],
sunxi_pinctrl_irq_handler);
irq_set_handler_data(pctl->irq[i], pctl);
}
dev_info(&pdev->dev, "initialized sunXi PIO driver\n");
......
......@@ -53,7 +53,7 @@
#define PULL_PINS_BITS 2
#define PULL_PINS_MASK 0x03
#define SUNXI_IRQ_NUMBER 32
#define IRQ_PER_BANK 32
#define IRQ_CFG_REG 0x200
#define IRQ_CFG_IRQ_PER_REG 8
......@@ -68,6 +68,8 @@
#define IRQ_STATUS_IRQ_BITS 1
#define IRQ_STATUS_IRQ_MASK ((1 << IRQ_STATUS_IRQ_BITS) - 1)
#define IRQ_MEM_SIZE 0x20
#define IRQ_EDGE_RISING 0x00
#define IRQ_EDGE_FALLING 0x01
#define IRQ_LEVEL_HIGH 0x02
......@@ -115,8 +117,8 @@ struct sunxi_pinctrl {
unsigned nfunctions;
struct sunxi_pinctrl_group *groups;
unsigned ngroups;
int irq;
int irq_array[SUNXI_IRQ_NUMBER];
int *irq;
unsigned *irq_array;
spinlock_t lock;
struct pinctrl_dev *pctl_dev;
};
......@@ -228,8 +230,10 @@ static inline u32 sunxi_pull_offset(u16 pin)
static inline u32 sunxi_irq_cfg_reg(u16 irq)
{
u8 reg = irq / IRQ_CFG_IRQ_PER_REG * 0x04;
return reg + IRQ_CFG_REG;
u8 bank = irq / IRQ_PER_BANK;
u8 reg = (irq % IRQ_PER_BANK) / IRQ_CFG_IRQ_PER_REG * 0x04;
return IRQ_CFG_REG + bank * IRQ_MEM_SIZE + reg;
}
static inline u32 sunxi_irq_cfg_offset(u16 irq)
......@@ -238,10 +242,16 @@ static inline u32 sunxi_irq_cfg_offset(u16 irq)
return irq_num * IRQ_CFG_IRQ_BITS;
}
static inline u32 sunxi_irq_ctrl_reg_from_bank(u8 bank)
{
return IRQ_CTRL_REG + bank * IRQ_MEM_SIZE;
}
static inline u32 sunxi_irq_ctrl_reg(u16 irq)
{
u8 reg = irq / IRQ_CTRL_IRQ_PER_REG * 0x04;
return reg + IRQ_CTRL_REG;
u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_ctrl_reg_from_bank(bank);
}
static inline u32 sunxi_irq_ctrl_offset(u16 irq)
......@@ -250,10 +260,16 @@ static inline u32 sunxi_irq_ctrl_offset(u16 irq)
return irq_num * IRQ_CTRL_IRQ_BITS;
}
static inline u32 sunxi_irq_status_reg_from_bank(u8 bank)
{
return IRQ_STATUS_REG + bank * IRQ_MEM_SIZE;
}
static inline u32 sunxi_irq_status_reg(u16 irq)
{
u8 reg = irq / IRQ_STATUS_IRQ_PER_REG * 0x04;
return reg + IRQ_STATUS_REG;
u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_status_reg_from_bank(bank);
}
static inline u32 sunxi_irq_status_offset(u16 irq)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment