Commit aedeb642 authored by Connor McAdams's avatar Connor McAdams Committed by Takashi Iwai

ALSA: hda/ca0132 - Add stream port remapping function.

Add function for remapping a ChipIO stream's ports. Also include some
documentation as to how this works.
Signed-off-by: default avatarConnor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-3-conmanx360@gmail.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 4a6d3b4e
...@@ -788,6 +788,40 @@ static const struct ae5_filter_set ae5_filter_presets[] = { ...@@ -788,6 +788,40 @@ static const struct ae5_filter_set ae5_filter_presets[] = {
} }
}; };
/*
* Data structures for storing audio router remapping data. These are used to
* remap a currently active streams ports.
*/
struct chipio_stream_remap_data {
unsigned int stream_id;
unsigned int count;
unsigned int offset[16];
unsigned int value[16];
};
static const struct chipio_stream_remap_data stream_remap_data[] = {
{ .stream_id = 0x14,
.count = 0x04,
.offset = { 0x00, 0x04, 0x08, 0x0c },
.value = { 0x0001f8c0, 0x0001f9c1, 0x0001fac6, 0x0001fbc7 },
},
{ .stream_id = 0x0c,
.count = 0x0c,
.offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c,
0x20, 0x24, 0x28, 0x2c },
.value = { 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3,
0x0001e2c4, 0x0001e3c5, 0x0001e8c6, 0x0001e9c7,
0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb },
},
{ .stream_id = 0x0c,
.count = 0x08,
.offset = { 0x08, 0x0c, 0x10, 0x14, 0x20, 0x24, 0x28, 0x2c },
.value = { 0x000140c2, 0x000141c3, 0x000150c4, 0x000151c5,
0x000142c8, 0x000143c9, 0x000152ca, 0x000153cb },
}
};
enum hda_cmd_vendor_io { enum hda_cmd_vendor_io {
/* for DspIO node */ /* for DspIO node */
VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000, VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000,
...@@ -7423,6 +7457,104 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec) ...@@ -7423,6 +7457,104 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec)
} }
} }
/*
* The region of ChipIO memory from 0x190000-0x1903fc is a sort of 'audio
* router', where each entry represents a 48khz audio channel, with a format
* of an 8-bit destination, an 8-bit source, and an unknown 2-bit number
* value. The 2-bit number value is seemingly 0 if inactive, 1 if active,
* and 3 if it's using Sample Rate Converter ports.
* An example is:
* 0x0001f8c0
* In this case, f8 is the destination, and c0 is the source. The number value
* is 1.
* This region of memory is normally managed internally by the 8051, where
* the region of exram memory from 0x1477-0x1575 has each byte represent an
* entry within the 0x190000 range, and when a range of entries is in use, the
* ending value is overwritten with 0xff.
* 0x1578 in exram is a table of 0x25 entries, corresponding to the ChipIO
* streamID's, where each entry is a starting 0x190000 port offset.
* 0x159d in exram is the same as 0x1578, except it contains the ending port
* offset for the corresponding streamID.
*
* On certain cards, such as the SBZ/ZxR/AE7, these are originally setup by
* the 8051, then manually overwritten to remap the ports to work with the
* new DACs.
*
* Currently known portID's:
* 0x00-0x1f: HDA audio stream input/output ports.
* 0x80-0xbf: Sample rate converter input/outputs. Only valid ports seem to
* have the lower-nibble set to 0x1, 0x2, and 0x9.
* 0xc0-0xdf: DSP DMA input/output ports. Dynamically assigned.
* 0xe0-0xff: DAC/ADC audio input/output ports.
*
* Currently known streamID's:
* 0x03: Mic1 ADC to DSP.
* 0x04: Mic2 ADC to DSP.
* 0x05: HDA node 0x02 audio stream to DSP.
* 0x0f: DSP Mic exit to HDA node 0x07.
* 0x0c: DSP processed audio to DACs.
* 0x14: DAC0, front L/R.
*
* It is possible to route the HDA audio streams directly to the DAC and
* bypass the DSP entirely, with the only downside being that since the DSP
* does volume control, the only volume control you'll get is through PCM on
* the PC side, in the same way volume is handled for optical out. This may be
* useful for debugging.
*/
static void chipio_remap_stream(struct hda_codec *codec,
const struct chipio_stream_remap_data *remap_data)
{
unsigned int i, stream_offset, tmp;
/* Get the starting port for the stream to be remapped. */
tmp = 0x1578 + remap_data->stream_id;
for (i = 0; i < 2; i++) {
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
VENDOR_CHIPIO_8051_ADDRESS_LOW + i,
((tmp >> (i * 8)) & 0xff));
}
stream_offset = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
VENDOR_CHIPIO_8051_DATA_READ, 0);
/*
* Check if the stream's port value is 0xff, because the 8051 may not
* have gotten around to setting up the stream yet. Wait until it's
* setup to remap it's ports.
*/
if (stream_offset == 0xff) {
for (i = 0; i < 5; i++) {
msleep(25);
stream_offset = snd_hda_codec_read(codec,
WIDGET_CHIP_CTRL, 0,
VENDOR_CHIPIO_8051_DATA_READ, 0);
if (stream_offset != 0xff)
break;
}
}
if (stream_offset == 0xff) {
codec_info(codec, "%s: Stream 0x%02x ports aren't allocated, remap failed!\n",
__func__, remap_data->stream_id);
return;
}
/* Offset isn't in bytes, its in 32-bit words, so multiply it by 4. */
stream_offset *= 0x04;
stream_offset += 0x190000;
for (i = 0; i < remap_data->count; i++) {
chipio_write_no_mutex(codec,
stream_offset + remap_data->offset[i],
remap_data->value[i]);
}
/* Update stream map configuration. */
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
}
/* /*
* Default speaker tuning values setup for alternative codecs. * Default speaker tuning values setup for alternative codecs.
*/ */
...@@ -7570,46 +7702,35 @@ static void sbz_connect_streams(struct hda_codec *codec) ...@@ -7570,46 +7702,35 @@ static void sbz_connect_streams(struct hda_codec *codec)
*/ */
static void sbz_chipio_startup_data(struct hda_codec *codec) static void sbz_chipio_startup_data(struct hda_codec *codec)
{ {
const struct chipio_stream_remap_data *dsp_out_remap_data;
struct ca0132_spec *spec = codec->spec; struct ca0132_spec *spec = codec->spec;
mutex_lock(&spec->chipio_mutex); mutex_lock(&spec->chipio_mutex);
codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n"); codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n");
/* These control audio output */ /* Remap DAC0's output ports. */
chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0); chipio_remap_stream(codec, &stream_remap_data[0]);
chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1);
chipio_write_no_mutex(codec, 0x190068, 0x0001fac6);
chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7);
/* Signal to update I think */
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
chipio_set_stream_channels(codec, 0x0C, 6); /* Remap DSP audio output stream ports. */
chipio_set_stream_control(codec, 0x0C, 1); switch (ca0132_quirk(spec)) {
/* No clue what these control */ case QUIRK_SBZ:
if (ca0132_quirk(spec) == QUIRK_SBZ) { dsp_out_remap_data = &stream_remap_data[1];
chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); break;
chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); case QUIRK_ZXR:
chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); dsp_out_remap_data = &stream_remap_data[2];
chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); break;
chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); default:
chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); dsp_out_remap_data = NULL;
chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); break;
chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
} else if (ca0132_quirk(spec) == QUIRK_ZXR) {
chipio_write_no_mutex(codec, 0x190038, 0x000140c2);
chipio_write_no_mutex(codec, 0x19003c, 0x000141c3);
chipio_write_no_mutex(codec, 0x190040, 0x000150c4);
chipio_write_no_mutex(codec, 0x190044, 0x000151c5);
chipio_write_no_mutex(codec, 0x190050, 0x000142c8);
chipio_write_no_mutex(codec, 0x190054, 0x000143c9);
chipio_write_no_mutex(codec, 0x190058, 0x000152ca);
chipio_write_no_mutex(codec, 0x19005c, 0x000153cb);
} }
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
chipio_set_stream_channels(codec, 0x0c, 6);
chipio_set_stream_control(codec, 0x0c, 1);
if (dsp_out_remap_data)
chipio_remap_stream(codec, dsp_out_remap_data);
codec_dbg(codec, "Startup Data exited, mutex released.\n"); codec_dbg(codec, "Startup Data exited, mutex released.\n");
mutex_unlock(&spec->chipio_mutex); mutex_unlock(&spec->chipio_mutex);
...@@ -7842,34 +7963,17 @@ static void ae5_post_dsp_startup_data(struct hda_codec *codec) ...@@ -7842,34 +7963,17 @@ static void ae5_post_dsp_startup_data(struct hda_codec *codec)
mutex_unlock(&spec->chipio_mutex); mutex_unlock(&spec->chipio_mutex);
} }
static const unsigned int ae7_port_set_data[] = {
0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, 0x0001e2c4, 0x0001e3c5,
0x0001e8c6, 0x0001e9c7, 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb
};
static void ae7_post_dsp_setup_ports(struct hda_codec *codec) static void ae7_post_dsp_setup_ports(struct hda_codec *codec)
{ {
struct ca0132_spec *spec = codec->spec; struct ca0132_spec *spec = codec->spec;
unsigned int i, count, addr;
mutex_lock(&spec->chipio_mutex); mutex_lock(&spec->chipio_mutex);
chipio_set_stream_channels(codec, 0x0c, 6); chipio_set_stream_channels(codec, 0x0c, 6);
chipio_set_stream_control(codec, 0x0c, 1); chipio_set_stream_control(codec, 0x0c, 1);
count = ARRAY_SIZE(ae7_port_set_data); /* Seems to share the same port remapping as the SBZ. */
addr = 0x190030; chipio_remap_stream(codec, &stream_remap_data[1]);
for (i = 0; i < count; i++) {
chipio_write_no_mutex(codec, addr, ae7_port_set_data[i]);
/* Addresses are incremented by 4-bytes. */
addr += 0x04;
}
/*
* Port setting always ends with a write of 0x1 to address 0x19042c.
*/
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00);
ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40); ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment